Search NASA⌕ Search

SEARCH · Search NASA

Results for “alkali metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High‐Performance Rechargeable Lithium‐Chlorine Batteries with ALD Conformal Starburst Porous Graphene Positive Electrodes

Abstract Rechargeable alkali metal‐chlorine batteries are emerging as a promising high‐energy‐density solution. However, they confront significant challenges, including the primary issue stemming from the weak binding affinity of cathode materials for Cl 2 , which leads to a sluggish and inadequate supply of Cl 2 during the redox reactions, resulting in a shortened cycle life and low Coulombic efficiency (CE), particularly when operating at ultrahigh specific capacity outputs. Herein, an Al 2 O 3 ‐skinned heterostructured starburst porous graphene with conformal metasurfaces (Al 2 O 3 @rGO) is reported, crafted from a hierarchical porous starburst graphene arranged in a unique layered structure by the PTFE microemulsion skin effect, leveraging subsequent fluidized bed atomic layer deposition (FBALD) of Al 2 O 3 groups. Al 2 O 3 @rGO features superhydrophilicity, effective adsorption, fast kinetics from stable dynamic respiratory interface, high electrical and thermal conductivity anisotropy, intelligent thermal management and safe operation over a wide temperature range. Consequently, the Li‐Cl 2 @Al 2 O 3 @rGO battery achieves an ultrahigh discharge specific capacity of 5000 mAh g −1 at ≈100% CE, and even delivers stable cycling over 200 cycles with 2000 mAh g −1 at an average CE of 99.8% under low temperature environment of ‐40 °C. The scalable heterostructure approach offers a sustainable perspective of the development of functionalized metamaterials and metasurfaces for next‐generation safe and energy‐dense batteries and broader applications.

Chemistry↗
DOE OSTI2023

Decoupling Accurate Electrochemical Behaviors for High-Capacity Electrodes via Reviving Three-Electrode Vehicles

Developing high-capacity electrodes requires the evaluation of electrochemical behaviors with an increasing current density. Currently, the current density for evaluation of high-capacity electrodes has reached a new stage where the polarization at the lithium counter electrode has become a technical barrier for the accurate evaluation of battery electrodes, resulting in severe performance and mechanism mischaracterizations. Here, the accurate electrochemical behavior for high-capacity electrodes via a single-channel three-electrode vehicle is decoupled, by which the impact of lithium counter electrode is minimized. The testing high-capacity graphite electrode is capable of delivering an excellent rate capability with 81.7% capacity retention at 0.3 C, as well as stable cycling performance retaining 97.5% practical reversible capacity after 225 cycles, much higher than the graphite electrode tested with traditional half-cell testing vehicle but in close agreement with the results obtained from a well-matched full cell, reflecting accurate electrochemical performance evaluations of high-capacity electrodes. Moreover, detailed electrochemical mechanisms of impedance and diffusion properties for working electrodes are also successfully decoupled individually. Here, this work uncovers the mismatch between traditional evaluation configuration and increasing testing current density and provides a guideline for accurate electrochemical evaluation for ever-increasing high-capacity electrodes, which is of great significance for high-energy lithium or other alkali-metal ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Histidine‐Mediated Ion Specific Effects Enable Salt Tolerance of a Pore‐Forming Marine Antimicrobial Peptide

Abstract Antimicrobial peptides (AMPs) preferentially permeate prokaryotic membranes via electrostatic binding and membrane remodeling. Such action is drastically suppressed by high salt due to increased electrostatic screening, thus it is puzzling how marine AMPs can possibly work. We examine as a model system, piscidin‐1, a histidine‐rich marine AMP, and show that ion‐histidine interactions play unanticipated roles in membrane remodeling at high salt: Histidines can simultaneously hydrogen‐bond to a phosphate and coordinate with an alkali metal ion to neutralize phosphate charge, thereby facilitating multidentate bonds to lipid headgroups in order to generate saddle‐splay curvature, a prerequisite to pore formation. A comparison among Na + , K + , and Cs + indicates that histidine‐mediated salt tolerance is ion specific. We conclude that histidine plays a unique role in enabling protein/peptide‐membrane interactions that occur in marine or other high‐salt environment.

Xian, Wujing↗
DOE OSTI2022

Histidine-Mediated Ion Specific Effects Enable Salt Tolerance of a Pore-Forming Marine Antimicrobial Peptide

Antimicrobial peptides (AMPs) preferentially permeate prokaryotic membranes via electrostatic binding and membrane remodeling. Such action is drastically suppressed by high salt due to increased electrostatic screening, thus it is puzzling how marine AMPs can possibly work. We examine as a model system, piscidin-1, a histidine-rich marine AMP, and show that ion-histidine interactions play unanticipated roles in membrane remodeling at high salt: Histidines can simultaneously hydrogen-bond to a phosphate and coordinate with an alkali metal ion to neutralize phosphate charge, thereby facilitating multidentate bonds to lipid headgroups in order to generate saddle-splay curvature, a prerequisite to pore formation. A comparison among Na + , K + , and Cs + indicates that histidine-mediated salt tolerance is ion specific. Here we conclude that histidine plays a unique role in enabling protein/peptide-membrane interactions that occur in marine or other high-salt environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microstructural and chemical characterization of a purple pigment from a Faiyum mummy portrait

Results are presented from analyses that were conducted to explain the presence of chromium, detected noninvasively using energy dispersive X-ray fluorescence (XRF), in the unusually large (2-3mm diameter) rough gem-like purple pigment particles in the paint used for a Faiyum mummy portrait. An approximately 50 µm diameter particle of the chromium-containing purple pigment was extracted from the Portrait of a Bearded Man, dated to Roman Imperial Egypt in the second century, circa 170-180 CE, accession #32.6 in the Walters Art Museum collection. The particle was characterized using energy dispersive X-ray fluorescence analysis, electron microscopy, diffraction, and atom probe tomography. It is demonstrated that the purple pigment particle is a heterogeneous organic pigment, specifically, a lake pigment likely derived from either plant or insect matter, which contains minor percentages of both transition metals and alkali / alkali earth metals, with nanometer-scale crystallites of lead carbonates and sulfates. The analyses revealed for the first time the nanoscale microstructure and stratigraphy in an ancient lake pigment. Results suggest that similarities with respect to time-period and place of production may be developed among unprovenienced Faiyum mummy portraits to help localize workshops or artists, using analyses focused on lake pigments to characterize specifically metal-based mordants.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Amorphous K–Co–Mo–S x Chalcogel: A Synergy of Surface Sorption and Ion-Exchange

Chalcogel represents a unique class of meso- to macroporous nanomaterials that offer applications in energy and environmental pursuits. We report the synthesis of an ion-exchangeable amorphous chalcogel using a nominal composition of K 2 CoMo 2 S 10 (KCMS) at room temperature is reported. Synchrotron X-ray pair distribution function (PDF), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) reveal a plausible local structure of KCMS gel consisting of Mo 5+ 2 and Mo 4+ 3 clusters in the vicinity of di/polysulfides which are covalently linked by Co 2+ ions. The ionically bound K + ions remain in the percolating pores of the Co–Mo–S covalent network. XANES of Co K-edge shows multiple electronic transitions, including quadrupole (1s→3d), shakedown (1s→4p + MLCT), and dipole allowed 1s→4p transitions. Remarkably, despite a lack of regular channels as in some crystalline solids, the amorphous KCMS gel shows ion-exchange properties with UO 2 2+ ions. Additionally, it also presents surface sorption via [S∙∙∙∙UO 2 2+ ] covalent interactions. Overall, this study underscores the synthesis of quaternary chalcogels incorporating alkali metals and their potential to advance separation science for cations and oxo-cationic species by integrating a synergy of surface sorption and ion-exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carbodiimide‐Induced Formation of Transient Polyether Cages**

Abstract The use of “fuel” compounds to drive chemical systems out of equilibrium is currently of interest because of the potential for temporally controlled, responsive behavior. We have recently shown that transiently formed crown ethers exhibit counterintuitive templation effects when generated in the presence of alkali metal cations: “matched” cations, such as K + with an 18‐crown‐6 analogue, suppress the formation of the macrocycles (negative templation). In this work, we describe two macrocyclic diacids that, on treatment with carbodiimides, give transient macrobicyclic cages analogous to polyether cages. Negative templation effects are observed for the smaller cage when generated in the presence of K + and Na + , but there is a weak, but reproducible, positive templation effect in the presence of Li + . The larger cage behaves similarly in the presence of Li + , K + , Rb + , and Cs + , but differently with Na + , which appears to bind to both the cage and the initial macrocycle.

Hossain, Mohammad Mosharraf↗
DOE OSTI2021

Influence of ion site occupancies on the unit cell parameters, specific volumes, and densities of M 8 (AlSiO 4 ) 6 X 2 sodalites where M = Li, Na, K, Rb, and Ag and X = Cl, Br, and I

Here, this paper discusses the effects of composition on the unit cell parameter (a), unit cell volume (V), specific volume (v), and density (ρ) of various sodalite compositions including $M^+_8$(AlSiO 4 ) 6 Cl 2 (M = Li, Na, K, Rb, and/or Ag) and Na8(AlSiO 4 ) 6 $X^-_2$(X = Cl, Br, and/or I). Compositional models were developed, and the results show that the models are successful at predicting a, V, and v (and thus ρ) within the compositional range available in the literature. Discussion is included on the correlation between the ionic radii of the alkali metals and halides in the sodalite β-cages and the measured values of a, V, v, and ρ. The data show linear increases in a and ρ with increases in the average ionic radii of the M + and X - constituents (data for v show a linear decrease).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

TiO x -supported Na-Mn-W oxides for the oxidative coupling of methane

Supported Na-Mn-W oxides are among the most studied catalysts for the oxidative coupling of methane (OCM) because of their superior thermal stability and relatively high C 2+ product yields. However, because of the structural complexity, the roles of each component in these catalysts have been controversial. In this work, WO x and MnO x sites were supported on titanate nanowires and employed in OCM studies. Compared to the commonly studied silica support, which is subject to severe restructuring due to the Na-induced crystallization, titanate support not only serves as a reservoir for alkali metals (e.g., Na), but also stabilizes isolated MnO x species. The catalytic performance of the titanate-based catalyst is similar to that of reference catalyst, MnO x /Na 2 WO 4 /SiO 2 , with a synergistic effect between MnO x and WO x sites. Further, advanced electron microscopy, X-ray diffraction, infrared spectroscopy, and X-ray absorption near edge structure spectroscopy suggest that the basic NaO x and MnO x species have strong interactions with the acidic WO x and TiO x species, which might contribute to the high selectivity toward C 2+ products and suppressed CO x formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues

The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.

and nuclear chemistry↗
DOE OSTI2020

Potassium iodide cluster based superhalogens and superalkalis: Theoretical calculations and experimental confirmation

We studied a series of potassium-iodide clusters with formulas of (KI)nI- and (KI)nK+ (n = 1-3) by quantum chemical calculations. The calculated vertical detachment energies (VDEs) of (KI)nI- clusters are all higher than those of halogen anions, and thus can be classified as superhalogen anions; while the calculated vertical electron affinities (VEAs) of (KI)nK+ clusters are all lower than those of alkali metal cations, and thus they can be recognized as superalkali cations. Our calculated VEA for (KI)K+, i.e., K2I+, agrees well with the previously measured value by thermal ionization mass spectrometry. We confirmed the theoretical predictions by measuring the negative ion photoelectron (NIPE) spectra of (KI)nI- anions, from which the measured VDEs are found to be in good agreement with the theoretically calculated values. In addition, we also explored the possibility of supersalts formed by these superhalogen anions and superalkali cations, for example, K3I3 can be regarded as a supersalt formed by K2I+ and KI2– subunits.

potassium-iodide clusters, superhalogen, superalka↗
DOE OSTI2022

Crystallization of potassium-zeolites in organic-free media

A ubiquitous phenomenon in zeolite synthesis is the generation of polymorphs leading to either single or multi-phase products. The use of organic structure-directing agents (OSDAs) often ensures a high degree of phase purity for a desired zeolite; however, OSDAs can be economically and environmentally prohibitive. The use of alkali metals as inorganic structure-directing agents (ISDAs) is a common alternative, although reductions in polymorph specificity and/or purity in organic-free media are significant limitations. Developing more controlled, facile synthesis strategies without the aid of OSDAs relies on understanding how zeolite growth conditions impact polymorph selection and alter the physicochemical properties of crystalline products. Relatively few studies of organic-free syntheses have systematically explored potassium growth media. Here, in this study, we examine synthesis conditions that promote the formation of five K-zeolites: CHA, LTL, MER, EDI, and BPH frameworks. Time-resolved analyses reveal distinct trends in crystallization kinetics and interzeolite transformations for potassium compared to prior studies that have largely focused on Na-zeolites. We also highlight methods to achieve nanosized crystals and markedly reduce crystallization times for zeolites, such as chabazite, which are notoriously difficult to synthesize in organic-free media at reasonable timescales. Collectively, these findings identify routes to control K-zeolite polymorphism and provide general design strategies to tailor their crystallization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Superconductivity in CH 4 and BH – 4 containing compounds derived from the high-pressure superhydrides

Inspired by the synthesis of the high-pressure Fm3m LaH 10 superconducting superhydride, systematic density functional theory (DFT) calculations are performed to study ternaries that could be derived from it by replacing two of the hydrogen atoms with boron or carbon and varying the identity of the electropositive element. Though many of the resulting alkali-metal and alkaline-earth MC 2 H 8 phases are predicted to be dynamically stable at mild pressures, their superconducting critical temperatures (T c s) are low because their metallicity results from the filling of an electride-like band. Substitution with a trivalent element leads to phases with substantial metal d- character at the Fermi level whose T c s are typically above 40 K. Here, among the MB 2 H 8 phases examined, KB 2 H 8 , RbB 2 H 8 and CsB 2 H 8 are predicted to be dynamically stable at very mild pressures, and their stability is rationalized by a DFT-Chemical Pressure analysis that elucidates the role of the M atom size. Quantum anharmonic effects strongly affect the properties of KB 2 H 8 , the highest predicted T c compound, near 10 GPa, but molecular dynamics simulations reveal it would decompose below its T c at this pressure. Nonetheless, at ca. 50 GPa KB 2 H 8 is predicted to be thermally stable with a superconducting figure of merit surpassing that of the recently synthesized LaBeH 8 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Progress towards the FRIB-EDM 3 -Frontend: A tool to provide radioactive molecules from isotope harvesting for fundamental symmetry studies

The under-construction FRIB-EDM 3 -instrument was designed to study polar radioactive molecules (such as RaF) in transparent cryogenic solids by laser spectroscopy. The instrument is divided into a frontend- and a backend section. The frontend accepts an aqueous sample from isotope harvesting and provides a mass-separated molecular ion beam in an ultra-high vacuum environment. In the backend, the ions are guided into alkali-metal vapor and the resulting neutrals are co-deposited in a solid argon matrix to perform laser spectroscopy. Here, this work addresses the frontend of the instrument. The efficient ionization of harvested radioisotopes from aqueous samples is achieved with a spray-ionization method. Subsequently, the molecular ion beam is analyzed by mass-to-charge ratio by a quadrupole mass filter. To verify the feasibility of the approach, numerical simulations with the COMSOL and SIMION packages have been conducted. While the former was applied to study transport in ion funnels, the latter was used to investigate ion beam transmission through the lower pressure sections. Following promising simulation results, a first experimental setup is under construction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

f-Element complexes with benzyl and cyclohexyl substituted trihydroborates

Actinide complexes containing the simplest borohydrides (BH 4 ) 1- and (MeBH 3 ) 1- can exhibit remarkably highly volatility, which creates unique hazards and handling challenges, especially when making measurements on solid samples under vacuum. Here we describe efforts to prepare new actinide borohydride complexes with attenuated volatility by adding bulkier benzyl (Bn) and cyclohexyl (Cy) substituents to boron. Reactions of ThCl 4 , UI 3 (thf) 4 , and NdI 3 with the mixed alkali metal salt Li/K(BnBH 3 )(thf) n yielded Th(BnBH 3 ) 4 (thf) 2 , U(BnBH 3 ) 4 (thf) 2 , and K[Nd(BnBH 3 ) 4 ], respectively. Notable amongst these, the reaction with UI 3 (thf) 4 proceeds via oxidation of U(III) to U(IV) despite the presence of reducing borohydride ligands. Similarly, reactions of the same metal halides with four equivalents of Li(CyBH 3 )(Et 2 O) n yielded Th(CyBH 3 ) 4 , U(CyBH 3 ) 4 (thf) 2 , and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ]. Single crystal X-ray diffraction studies of the M(BnBH 3 ) 4 (thf) 2 complexes with M = Th and U confirmed their formulations. Furthermore, the complexes have approximate D 2d point group symmetry and adopt bicapped hexagonal antiprismatic coordination geometries with axial thf ligands and κ 3 -BnBH 3 ligands bound in the equatorial plane. K[Nd(BnBH 3 ) 4 ] and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ], which were prepared for comparison to U(III) complexes that were unsuccessfully targeted, were also structurally characterized to reveal complex anions with tetrahedral arrangements of trihydroborate ligands bound to Nd(III). Crystals obtained for Th(CyBH 3 ) 4 and U(CyBH 3 ) 4 (thf) 2 were not suitable for XRD studies, but 1 H and 11 B NMR spectra were consistent with their formulations. Collectively, these complexes represent rare examples of structurally characterized f-element trihydroborate complexes with carbon substituents other than methyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reactions of Studtite UO 4 ·4H 2 O in Alkali Hydroxides: Isolation of Single-Crystal Uranate Phases under Mild Hydrothermal Conditions

Uranyl peroxide complexes, particularly studtite (UO 4 ·4H 2 O), are important phases within the nuclear fuel cycle, forming through radiolysis-induced reactions on the surfaces of spent fuel and in waste environments. Studtite has been identified in Hanford’s irradiated fuel storage basins, Chornobyl’s corium lavas, and is anticipated on Fukushima’s fuel debris. While its formation and stability have been extensively studied, the reactivity of UO 4 ·4H 2 O in highly alkaline environments such as those encountered in high-level nuclear waste remains underexplored. These environments contain molar concentrations of [OH - ] and present a chemically dynamic and reactive environment where actinide behavior is not well understood. Reported here are investigations of uranium reactions in concentrated alkali hydroxides under mild hydrothermal conditions (<200 °C) that have resulted in the isolation of the alkali metal uranates Li 2 UO 4 , α-Na 2 UO 4 , γ-Na 2 U 2 O 7 , and K 2 U 2 O 7 . In contrast to conventional solid-state methods (>800 °C) that typically yield polycrystalline powders, our approach enables the isolation of these uranates as single crystals, allowing us to provide single-crystal structure solutions of certain uranates for the first time. Our findings match the results of high-level waste tank sampling, confirming that sodium diuranate (Na 2 U 2 O 7 ) is the most persistent uranium phase, potentially forming through reactions of uranyl peroxide intermediates with NaOH under radiolytic and highly alkaline conditions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Lessons Learned—Lithium Silicide Hydration Fire

Alkali metals, such as lithium, sodium, potassium, etc., are highly reactive elements. While researchers generally handle these metals with caution, less caution is taken when these elements have been “reacted”. In this work, a recent incident is examined in which a pair of researchers ignited a lithium silicide alloy sample that was assumed to be fully hydrated to lithium hydroxide and, thereby, no longer water-reactive. However, variations in the original chemical composition of the lithium compounds examined resulted in select mixtures failing to hydrate and react completely to lithium hydroxide in the time frame allowed. This gave rise to residual unreacted, water-sensitive lithium silicide which resulted in a violent exothermic reaction with water and autoignition of the produced hydrogen gas. This Article describes this incident and improvements that can be implemented to prevent similar incidents from occurring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗