Search NASA⌕ Search

SEARCH · Search NASA

Results for “antenna radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Electromagnetic scattering and radiation from microstrip patch antennas and spirals residing in a cavity

A new hybrid method is presented for the analysis of the scattering and radiation by conformal antennas and arrays comprised of circular or rectangular elements. In addition, calculations for cavity-backed spiral antennas are given. The method employs a finite element formulation within the cavity and the boundary integral (exact boundary condition) for terminating the mesh. By virtue of the finite element discretization, the method has no restrictions on the geometry and composition of the cavity or its termination. Furthermore, because of the convolutional nature of the boundary integral and the inherent sparseness of the finite element matrix, the storage requirement is kept very low at O(n). These unique features of the method have already been exploited in other scattering applications and have permitted the analysis of large-size structures with remarkable efficiency. In this report, we describe the method's formulation and implementation for circular and rectangular patch antennas in different superstrate and substrate configurations which may also include the presence of lumped loads and resistive sheets/cards. Also, various modelling approaches are investigated and implemented for characterizing a variety of feed structures to permit the computation of the input impedance and radiation pattern. Many computational examples for rectangular and circular patch configurations are presented which demonstrate the method's versatility, modeling capability and accuracy.

Volakis, J. L.↗
NASA NTRS1976

Analysis of the radiation patterns of reflector antennas

The development and application of a numerical technique for rapid calculation of the far-field radiation patterns of a reflector antenna from either a measured or computed feed pattern are reported. The reflector is defined by the intersection of a cone with any surface of revolution or an offset sector of any surface of revolution. The feed is assumed to be linearly polarized and can have an arbitrary location. Both the copolarized and the cross-polarized reflector radiation patterns are computed. Calculations using the technique compare closely with measured radiation patterns of a waveguide-fed offset parabolic reflector. Unique features of this technique are freedom from restrictive feed assumptions and the numerical methods used in preparing the aperture-plane electric-field data for integration.

Kauffman, J. F.↗
NASA NTRS1991

Reducing Cross-Polarized Radiation From A Microstrip Antenna

Change in configuration of feed of nominally linearly polarized microstrip-patch transmitting array antenna reduces cross-polarized component of its radiation. Patches fed on opposing sides, in opposite phases. Combination of spatial symmetry and temporal asymmetry causes copolarized components of radiation from fundamental modes of patches to reinforce each other and cross-polarized components of radiation from higher-order modes to cancel each other.

Huang, John↗
NASA NTRS2004

Integrated Antenna/Solar Array Cell (IA/SAC) System for Flexible Access Communications

Present satellite communications systems normally use separate solar cells and antennas. Since solar cells generally account for the largest surface area of the spacecraft, co-locating the antenna and solar cells on the same substrate opens the possibility for a number of data-rate-enhancing communications link architecture that would have minimal impact on spacecraft weight and size. The idea of integrating printed planar antenna and solar array cells on the same surface has been reported in the literature. The early work merely attempted to demonstrate the feasibility by placing commercial solar cells besides a patch antenna. Recently, Integrating multiple antenna elements and solar cell arrays on the same surface was reported for both space and terrestrial applications. The application of photovoltaic solar cell in a planar antenna structure where the radiating patch antenna is replaced by a Si solar cell has been demonstrated in wireless communication systems (C. Bendel, J. Kirchhof and N. Henze, 3rd Would Photovotaic Congress, Osaka, Japan, May 2003). Based on a hybrid approach, a 6x1 slot array with circularly polarized crossdipole elements co-located on the same surface of the solar cells array has been demonstrated (S. Vaccaro, J. R. Mosig and P. de Maagt, IEEE Trans. Ant. and Propag., Vol. 5 1, No. 8, Aug. 2003). Amorphous silicon solar cells with about 5-10% efficiency were used in these demonstrations. This paper describes recent effort to integrate advanced solar cells with printed planar antennas. Compared to prior art, the proposed WSAC concept is unique in the following ways: 1) Active antenna element will be used to achieve dynamic beam steering; 2) High efficiency (30%) GaAs multi-junction solar cells will be used instead of Si, which has an efficiency of about 15%; 3) Antenna and solar cells are integrated on a common GaAs substrate; and 4) Higher data rate capability. The IA/SAC is designed to operate at X-band (8-12 GH) and higher frequencies Higher operating frequencies enable greater bandwidth and thus higher data transfer rates. The first phase of the effort involves the development of GaAs solar cell MIMs (Monolithically Integrated Module) with a single patch antenna on the opposite side of the substrate. Subsequent work will involve the integration of MIMs and antennas on the same side of the substrate. Results from the phase one efforts will be presented.

Lee, Ricard Q.↗
NASA NTRS1990

Intensity modulation of HF heater-induced plasma lines

The Arecibo HF heater is normally composed of two separate sets of antenna array, transmitting waves vertically at the same frequency and polarization. However, when these two sets of antenna array radiate at slightly different frequencies, the intensities of HF heater-induced plasma lines (HFPLs) can be drastically modulated. In recent Duncan et al.'s (1989) experiments the 100 percent intensity modulation of HFPLs was seen to persist even when the secondary set of antenna array radiated at a few percent of the power transmitted by the primary set of antenna array. An explanation is offered, and it is shown that there exists a minimum power, Pmin, and if the secondary set of antenna array radiates at a power lower than Pmin, the 100-percent intensity modulation of HFPLs will not be observed. The functional dependence of Pmin on the difference frequency of the two sets of antenna array is also predicted for future experiments to corroborate.

Kuo, S. P.↗
NASA NTRS1979

On the efficient computation of Fraunhofer and Fresnel region fields radiated by reflector and planar-aperture antennas

Computation of fields radiated by parabolic reflectors and planar apertures is a problem of prime importance, and conventional approaches to performing these computations are often very time-consuming. The paper demonstrates the usefulness of a series expansion technique for efficient computation of radiated fields in both the Fraunhofer and Fresnel regions. The series approach is based on the use of the Jacobi polynomials. The application of the series method to determining the far-field pattern of the antenna from the near-field measurements for an arbitrary aperture antenna is also discussed.

Mittra, R.↗
NASA NTRS1994

DE 1 VLF observations during Activny wave injection experiments

We report on coordinated high-altitude satellite observations in support of one of the first space-based very low frequency (VLF) wave injection experiments, namely the USSR Aktivny mission. The Aktivny satellite (A) was designed to carry a VLF transmitter (nominal frequency approximately 10 kHz, transmitter power approximately 10 kW) coupled to a 20-m-diameter loop antenna in a nearly polar orbit (83 deg inclination, apogee approximately 2500 km, perigee approximately 500 km). We focus our attention on conjunction experiments between the Aktivny and DE 1 satellites. Because of problems in the deployment of the loop antenna, the radiated power capability of the antenna was significantly reduced. Although this substantially reduced the expectation of receiving detectable signal levels on the satellite, the DE 1/Aktivny conjunction experiments were nevertheless carried out as a means of possibly placing an upper limit on the radiated power. During the period November 1989 through April 1990, a total of 10 DE 1/Aktivny wave injection sessions were conducted. During each session the Aktivny transmitter operated at 10.537 kHz with 1 s On - 1 s Off format, for a period of 6 min centered around the conjunction time. During three conjunction periods (December 12, 26, and 27, 1989) both DE 1 and Aktivny were in the southern hemisphere, and DE 1 was at relatively low altitudes (ranging from 6211 to 14,810 km), thus providing the best conjunction possibilities according to the ray tracing criteria developed above. On most days, Omega transmitter signals as well as commonly occuring natural wave phenomena such as whistlers (0(+)) and hiss were clearly seen well above the background level, but there was no evidence of the Aktivny 1 s On/ 1 s Off pattern. Though no Aktivny signals were detected by the LWR on the DE 1 satellite, the experimental constraints allow us to place an upper limit on the total power radiated by the Aktivny transmitter in the whistler-mode. Using experimental parameters, and the minimum detectable signal level of 0.05 muV/m for LWR, we find the upper limit on the total power radiated by the Aktivny satellite in the whistler-mode to be approximately 10 mW. Several recommendations for future space-based wave injection experiments are presented.

Sonwalkar, V. S.↗
NASA NTRS2003

Development of Numerical Codes for Modeling Electromagnetic Behavior at High Frequencies Near Large Objects

A study into the problem of determining electromagnetic solutions at high frequencies for problems involving complex geometries, large sizes and multiple sources (e.g. antennas) has been initiated. Typical applications include the behavior of antennas (and radiators) installed on complex conducting structures (e.g. ships, aircrafts, etc..) with strong interactions between antennas, the radiation patterns, and electromagnetic signals is of great interest for electromagnetic compatibility control. This includes the overall performance evaluation and control of all on-board radiating systems, electromagnetic interference, and personnel radiation hazards. Electromagnetic computational capability exists at NASA LaRC, and many of the codes developed are based on the Moment Method (MM). However, the MM is computationally intensive, and this places a limit on the size of objects and structures that can be modeled. Here, two approaches are proposed: (i) a current-based hybrid scheme that combines the MM with Physical optics, and (ii) an Alternating Direction Implicit-Finite Difference Time Domain (ADI-FDTD) method. The essence of a hybrid technique is to split the overall scattering surface(s) into two regions: (a) a MM zone (MMZ) which can be used over any part of the given geometry, but is most essential over irregular and "non-smooth" geometries, and (b) a PO sub-region (POSR). Currents induced on the scattering and reflecting surfaces can then be computed in two ways depending on whether the region belonged to the MMZ or was part of the POSR. For the MMZ, the current calculations proceed in terms of basis functions with undetermined coefficients (as in the usual MM method), and the answer obtained by solving a system of linear equations. Over the POSR, conduction is obtained as a superposition of two contributions: (i) currents due to the incident magnetic field, and (ii) currents produced by the mutual induction from conduction within the MMZ. This effectively leads to a reduction in the size of linear equations from N to N - Npo with N being the total number of segments for the entire surface and Npo the number of segments over the POSR. The scheme would be appropriate for relatively large, flat surfaces, and at high frequencies. The ADI-FDTD scheme provides for both transient and steady state analyses. The restrictive Courant-Friedrich-Levy (CFL) condition on the time-step is removed, and so large time steps can be chosen even though the spatial grids are small. This report includes the problem definition, a detailed discussion of both the numerical techniques, and numerical implementations for simple surface geometries. Numerical solutions have been derived for a few simple situations.

Joshi, R. P.↗
NASA NTRS1990

The radiation pattern of a monopole antenna attached to a conducting box

A system investigation was undertaken to determine the radiation patterns of a monopole antenna mounted on a cubical conducting box over a ground plane. The effects of the location of the monopole and the electrical size of the box were compared with similar patterns measured over a flat ground plane and with numerically predicted values obtained from a method-of-moments patch code. It was concluded that the location at which a monopole antenna is mounted on a conducting box and the electrical size of the box clearly affect the overall radiation pattern of a monopole antenna. In general, mounting the antenna away from the center of the box will increase the depth of the nulls. In particular, planes will also increase the maximum E(phi) component of the field to the extent that it can become comparable to E(theta).

Chu, Andrew W. C.↗
NASA NTRS1984

Environmental effects on the dynamics and control of an orbiting large flexible antenna system

Solar radiation pressure on the vibrating antenna structure, temperature gradients induced by solar heating, and stabilizing gravity-gradient torques were considered when the linear regulator theory was used to obtain orientation and shape control of a hoop/column antenna system being considered for the land mobile satellite system. A finite element model of the antenna system which includes all six rigid modes and seven flexible modes was used. Results show that the environmental disturbances affect only the rigid modes of the structure. The effect of solar radiation pressure interacting with the vibrating system is smaller than the solar radiation pressure acting on the thermally deformed structure. To reduce control effort in order to maintain shape and orientation, thermal deformations must be minimized in the preliminary design of the system.

Krishna, R.↗
NASA NTRS1984

Environmental effects on the dynamics and control of an orbiting large flexible antenna system

Solar radiation pressure on the vibrating antenna structure, temperature gradients induced by solar heating, and stabilizing gravity-gradient torques were considered when the linear regulator theory was used to obtain orientation and shape control of a hoop/column antenna system being considered for the land mobile satellite system. A finite element model of the antenna system which includes all six rigid modes and seven flexible modes was used. Results show that the environmental disturbances affect only the rigid modes of the structure. The effect of solar radiation pressure interacting with the vibrating system is smaller than the solar radiation pressure acting on the thermally deformed structure. To reduce control effect in order to maintain shape and orientation, thermal deformations must be minimized in the preliminary design of the system.

Krishna, R.↗