Search NASA⌕ Search

SEARCH · Search NASA

Results for “array data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Application of Reconfigurable Computing Technology to Multi-KiloHertz Micro-Laser Altimeter (MMLA) Data Processing

The Multi-KiloHertz Micro-Laser Altimeter (MMLA) is an aircraft based instrument developed by NASA Goddard Space Flight Center with several potential spaceflight applications. This presentation describes how reconfigurable computing technology was employed to perform MMLA signal extraction in real-time under realistic operating constraints. The MMLA is a "single-photon-counting" airborne laser altimeter that is used to measure land surface features such as topography and vegetation canopy height. This instrument has to date flown a number of times aboard the NASA P3 aircraft acquiring data at a number of sites in the Mid-Atlantic region. This instrument pulses a relatively low-powered laser at a very high rate (10 kHz) and then measures the time-of-flight of discrete returns from the target surface. The instrument then bins these measurements into a two-dimensional array (vertical height vs. horizontal ground track) and selects the most likely signal path through the array. Return data that does not correspond to the selected signal path are classified as noise returns and are then discarded. The MMLA signal extraction algorithm is very compute intensive in that a score must be computed for every possible path through the two dimensional array in order to select the most likely signal path. Given a typical array size with 50 x 6, up to 33 arrays must be processed per second. And for each of these arrays, roughly 12,000 individual paths must be scored. Furthermore, the number of paths increases exponentially with the horizontal size of the array, and linearly with the vertical size. Yet, increasing the horizontal and vertical sizes of the array offer science advantages such as improved range, resolution, and noise rejection. Due to the volume of return data and the compute intensive signal extraction algorithm, the existing PC-based MMLA data system has been unable to perform signal extraction in real-time unless the array is limited in size to one column, This limits the ability of the MMLA to operate in environments with sparse signal returns and a high number of noise return. However, under an IR&D project, an FPGA-based, reconfigurable computing data system has been developed that has been demonstrated to perform real-time signal extraction under realistic operating constraints. This reconfigurable data system is based on the commercially available Firebird Board from Annapolis Microsystems. This PCI board consists of a Xilinx Virtex 2000E FPGA along with 36 MB of SRAM arranged in five separately addressable banks. This board is housed in a rackmount PC with dual 850MHz Pentium processors running the Windows 2000 operating system. This data system performs all signal extraction in hardware on the Firebird, but also runs the existing "software based" signal extraction in tandem for comparison purposes. Using a relatively small amount of the Virtex XCV2000E resources, the reconfigurable data system has demonstrated to improve performance improvement over the existing software based data system by an order of magnitude. Performance could be further improved by employing parallelism. Ground testing and a preliminary engineering test flight aboard the NASA P3 has been performed, during which the reconfigurable data system has been demonstrated to match the results of the existing data system.

Powell, Wesley↗
NASA NTRS1984

The angular distribution of infrared radiances emerging from broken fields of cumulus clouds

Infrared radiances were simultaneously measured from broken cloud fields over the eastern Pacific Ocean by means of the eastern and western geostationary satellites. The measurements were compared with the results of models that characterized the clouds as black circular cylinders disposed randomly on a plane and as black cuboids disposed in regular and in shifted periodic arrays. The data were also compared with the results obtained from a radiative transfer model that considered emission and scattering by a regular array of periodic cuboidal clouds. It was found that the radiances did not depend significantly on the azimuth angle; this suggested that the observed cloud fields were not regular periodic arrays. However, the dependence on zenith angle suggested that the clouds were not disposed randomly either. The implication of these measurements on the understanding of the transfer of infrared radiances through broken cloud fields is considered.

Naber, P. S.↗
NASA NTRS1997

Dark Forward Electrical Testing of the Mir Cooperative Solar Array

During July 11 to 13, 1995, a team from the NASA Lewis Research Center performed dark forward electrical testing on the Mir Cooperative Solar Array (MCSA) flight unit in the Space Station Processing Facility at the NASA Kennedy Space Center. The MCSA was jointly designed and built by the United States and Russia to supply approximately 6 kW of electricity to the Russian Mir space station. The primary objective of testing was to assess the overall electrical performance of the flight array after handling and shipment from Russia to NASA Kennedy. This objective was achieved without the high cost and difficulties of deploying and illuminating the MCSA as is usually done with large-area solar arrays. The data obtained provided U.S. and Russian program managers with a high level of confidence in the MCSA electrical performance prior to the array's launch on shuttle mission STS-74 in November 1995 and its deployment on Mir in May 1996.

Kerslake, Thomas W.↗
NASA NTRS1982

Seasat synthetic-aperture radar data reduction using parallel programmable array processors

This paper presents a digital processing system that produces the Seasat synthetic-aperture radar (SAR) imagery. The system consists of a SEL 32/77 host minicomputer and three AP-120B array processors. The partitioning of the SAR processing functions and the design of software modules is described. The rationale for selecting the parallel array processor architecture and the methodology for developing the parallel processing scheme on this system is described. This system attains a Seasat SAR data reduction speed of 2.5 h per 25-m resolution 4-look and 100 km x 100 km image frame. A preliminary performance evaluation of this parallel processing system and potential future applications for remote sensing data reduction are described.

Wu, C.↗
NASA NTRSDate not supplied

Data Sharing in Radiobiology; Towards FAIR

The value of scientific data depends on their findability, accessibility, integrability and reusability according to the FAIR principles. Together with the sustainability of data preservation and access, these principles underpin the long term benefits of scientific research. Within the domain of radiobiology we have a huge array of data types, themes and complexities which make standardisation of metadata, data structure and data integration very challenging. Moreover, it is clear that, for example, in the area of disaster preparedness, the ready discovery and availability of multiple types of data, for example on biological effects of exposure, climatology, ecology, human behavioural and attitudinal studies, is important for an integrated scientific approach. Because these data are spread over many databases, journal supplementary information resources and even the computers of the investigators, their discovery and reuse can be challenging. Despite exhortations from funding agencies and scientific institutions over the past two decades there is still a serious deficit in the willingness and in some cases the ability of investigators to share data, and although much may not be formally „Public domain“, information about the existence of the data, their metadata, and how to obtain them should always be available. We report the progress of work on three databases, the STORE and the NASA GeneLab and LSDA repositories to leverage the Radiation Biology Ontology (RBO), a structured terminology for metadata that can be used by all radiation biology-relevant databases to unite federated and automated data searches across multiple databases, for example using web services, and through semantic web technologies supporting data discovery. The initial primary use-cases for RBO were archiving data in the STORE database (https://www.storedb.org/), the repository used for the RadoNorm and Pianoforte Projects among others, and in the NASA Open Science Data Repository (https://osdr.nasa.gov/bio). The scope of radiobiology research ranges from basic physics to radiation oncology to sociolegal studies; no existing ontology had the necessary breadth or depth to fulfill this need. In addition, a formal ontology has the advantage of being usable for machine learning and, importantly, for tasks like data integration, knowledge extraction from the scientific literature and for query extension and data classification. Standardisation of metadata is one of the primary objectives of the FAIR principles for open data; RBO is an important landmark for FAIR-compliant radiation biology data sharing. The RBO is developed using the open-source tools of GitHub and the OBO Foundry-led Ontology Development Kit, and published through GitHub and the NIH/NCBI BioPortal website. This initial phase of concept modeling has yielded an ontology that has more than 300 declared concepts, with more than 3500 additional concepts imported from other OBO Foundry ontologies with relevance to radiation biology (for example, concepts from the ISO standard Basic Formal Ontology, the Environment Ontology and the Gene Ontology). We welcome input into the development of RBO and encourage its adoption.

ontologies↗
NASA NTRS2023

Data Sharing in Radiation Biology: Towards FAIR

The value of scientific data depends on their findability, accessibility, integrability and reusability according to the FAIR principles. Together with the sustainability of data preservation and access, these principles underpin the long term benefits of scientific research. Within the domain of radiobiology we have a huge array of data types, themes and complexities which make standardisation of metadata, data structure and data integration very challenging. Moreover, it is clear that, for example, in the area of disaster preparedness, the ready discovery and availability of multiple types of data, for example on biological effects of exposure, climatology, ecology, human behavioural and attitudinal studies, is important for an integrated scientific approach. Because these data are spread over many databases, journal supplementary information resources and even the computers of the investigators, their discovery and reuse can be challenging. Despite exhortations from funding agencies and scientific institutions over the past two decades there is still a serious deficit in the willingness and in some cases the ability of investigators to share data, and although much may not be formally "Public domain“, information about the existence of the data, their metadata, and how to obtain them should always be available. We report the progress of work on three databases, the STORE and the NASA GeneLab and LSDA repositories to leverage the Radiation Biology Ontology (RBO), a structured terminology for metadata that can be used by all radiation biology-relevant databases to unite federated and automated data searches across multiple databases, for example using web services, and through semantic web technologies supporting data discovery. The initial primary use-cases for RBO were archiving data in the STORE database (https://www.storedb.org/), the repository used for the RadoNorm and Pianoforte Projects among others, and in the NASA Open Science Data Repository (https://osdr.nasa.gov/bio). The scope of radiobiology research ranges from basic physics to radiation oncology to sociolegal studies; no existing ontology had the necessary breadth or depth to fulfill this need. In addition, a formal ontology has the advantage of being usable for machine learning and, importantly, for tasks like data integration, knowledge extraction from the scientific literature and for query extension and data classification. Standardisation of metadata is one of the primary objectives of the FAIR principles for open data; RBO is an important landmark for FAIR-compliant radiation biology data sharing. The RBO is developed using the open-source tools of GitHub and the OBO Foundry-led Ontology Development Kit, and published through GitHub and the NIH/NCBI BioPortal website. This initial phase of concept modeling has yielded an ontology that has more than 300 declared concepts, with more than 3500 additional concepts imported from other OBO Foundry ontologies with relevance to radiation biology (for example, concepts from the ISO standard Basic Formal Ontology, the Environment Ontology and the Gene Ontology). We welcome input into the development of RBO and encourage its adoption.

ontologies↗
NASA NTRS1978

The effect of operations on the ground noise footprints associated with a large multibladed, nonbanging helicopter

In order to expand the data base of helicopter external noise characteristics, a flyover noise measurement program was conducted utilizing the NASA Civil Helicopter Research Aircraft. The remotely operated multiple array acoustics range (ROMAAR) and a 2560-m linear microphone array were utilized for the purpose of documenting the noise characteristics of the test helicopter during flyby and landing operations. By utilizing both ROMAAR concept and the linear array, the data necessary to plot the ground noise footprints and noise radiation patterns were obtained. Examples of the measured noise signature of the test helicopter, the ground noise footprint or contours, and the directivity patterns measured during level flyby and landing operations of a large, multibladed, nonbanging helicopter, the CH-53, are presented.

Hilton, D. A.↗
NASA NTRS1993

Multiple wavelength observations of an off-limb eruptive solar flare

The eruptive prominence and limb flare which occurred at 1454 UT on June 20, 1989 is described and analyzed. This event was observed by many different instruments providing an unusual amount and variety of data: images at 1.4 GHz, 37 GHz, and H-alpha, and spectra in hard X-ray, soft X-ray, and radio frequencies. This array of data makes it possible to explore the relationships between flare and eruptive prominence emissions at different wavelengths. VLA images at 1.4 GHz show changing sources in a set of high (about 10 exp 10 cm) coronal loops associated with the erupting prominence. We use a full gyrosynchrotron code to model a 1.4 GHz source early in the flare as a large coronal loop. The model results lead us to conclude that the initial acceleration occurs in smaller, denser loops which also produce the flare's hard X-ray emission. We also present evidence that a source at 1.4 GHz later in the event is due to second-harmonic plasma emission. This source is adjacent to a leg of the prominence and comes from a dense column of material in the magnetic structure supporting the prominence.

Kugera, T. A.↗
NASA NTRS1986

Integrated-Circuit Active Digital Filter

Pipeline architecture with parallel multipliers and adders speeds calculation of weighted sums. Picture-element values and partial sums flow through delay-adder modules. After each cycle or time unit of calculation, each value in filter moves one position right. Digital integrated-circuit chips with pipeline architecture rapidly move 35 X 35 two-dimensional convolutions. Need for such circuits in image enhancement, data filtering, correlation, pattern extraction, and synthetic-aperture-radar image processing: all require repeated calculations of weighted sums of values from images or two-dimensional arrays of data.

Nathan, R.↗
NASA NTRS2002

NASA Remote Sensing Data for Epidemiological Studies

In response to the need for improved observations of environmental factors to better understand the links between human health and the environment, NASA has established a new program to significantly improve the utilization of NASA's diverse array of data, information, and observations of the Earth for health applications. This initiative, lead by Goddard Space Flight Center (GSFC) has the following goals: (1) To encourage interdisciplinary research on the relationships between environmental parameters (e.g., rainfall, vegetation) and health, (2) Develop practical early warning systems, (3) Create a unique system for the exchange of Earth science and health data, (4) Provide an investigator field support system for customers and partners, (5) Facilitate a system for observation, identification, and surveillance of parameters relevant to environment and health issues. The NASA Environment and Health Program is conducting several interdisciplinary projects to examine applications of remote sensing data and information to a variety of health issues, including studies on malaria, Rift Valley Fever, St. Louis Encephalitis, Dengue Fever, Ebola, African Dust and health, meningitis, asthma, and filariasis. In addition, the NASA program is creating a user-friendly data system to help provide the public health community with easy and timely access to space-based environmental data for epidemiological studies. This NASA data system is being designed to bring land, atmosphere, water and ocean satellite data/products to users not familiar with satellite data/products, but who are knowledgeable in the Geographic Information Systems (GIS) environment. This paper discusses the most recent results of the interdisciplinary environment-health research projects and provides an analysis of the usefulness of the satellite data to epidemiological studies. In addition, there will be a summary of presently-available NASA Earth science data and a description of how it may be obtained.

Maynard, Nancy G.↗
NASA NTRS2016

Observations of Transient ISS Floating Potential Variations During High Voltage Solar Array Operations

The International Space Station (ISS) continues to be a world-class space research laboratory after over 15 years of operations, and it has proven to be a fantastic resource for observing spacecraft floating potential variations related to high voltage solar array operations in Low Earth Orbit (LEO). Measurements of the ionospheric electron density and temperature along the ISS orbit and variations in the ISS floating potential are obtained from the Floating Potential Measurement Unit (FPMU). In particular, rapid variations in ISS floating potential during solar array operations on time scales of tens of milliseconds can be recorded due to the 128 Hz sample rate of the Floating Potential Probe (FPP) pro- viding interesting insight into high voltage solar array interaction with the space plasma environment. Comparing the FPMU data with the ISS operations timeline and solar array data provides a means for correlating some of the more complex and interesting transient floating potential variations with mission operations. These complex variations are not reproduced by current models and require further study to understand the underlying physical processes. In this paper we present some of the floating potential transients observed over the past few years along with the relevant space environment parameters and solar array operations data.

Willis, Emily M.↗
NASA NTRS1993

Array Simulations Platform (ASP) predicts NASA Data Link Module (NDLM) performance

Through a variety of imbedded theoretical and actual antenna patterns, the array simulation platform (ASP) enhanced analysis of the array antenna pattern effects for the KTx (Ku-Band Transmit) service of the NDLM (NASA Data Link Module). The ASP utilizes internally stored models of the NDLM antennas and can develop the overall pattern of antenna arrays through common array calculation techniques. ASP expertly assisted in the diagnosing of element phase shifter errors during KTx testing and was able to accurately predict the overall array pattern from combinations of the four internally held element patterns. This paper provides an overview of the use of the ASP software in the solving of array mis-phasing problems.

Snook, Allen David↗
NASA NTRS1983

Massively parallel processor computer

An apparatus for processing multidimensional data with strong spatial characteristics, such as raw image data, characterized by a large number of parallel data streams in an ordered array is described. It comprises a large number (e.g., 16,384 in a 128 x 128 array) of parallel processing elements operating simultaneously and independently on single bit slices of a corresponding array of incoming data streams under control of a single set of instructions. Each of the processing elements comprises a bidirectional data bus in communication with a register for storing single bit slices together with a random access memory unit and associated circuitry, including a binary counter/shift register device, for performing logical and arithmetical computations on the bit slices, and an I/O unit for interfacing the bidirectional data bus with the data stream source. The massively parallel processor architecture enables very high speed processing of large amounts of ordered parallel data, including spatial translation by shifting or sliding of bits vertically or horizontally to neighboring processing elements.

Fung, L. W.↗
NASA NTRS1994

A Navier-Strokes Chimera Code on the Connection Machine CM-5: Design and Performance

We have implemented a three-dimensional compressible Navier-Stokes code on the Connection Machine CM-5. The code is set up for implicit time-stepping on single or multiple structured grids. For multiple grids and geometrically complex problems, we follow the 'chimera' approach, where flow data on one zone is interpolated onto another in the region of overlap. We will describe our design philosophy and give some timing results for the current code. A parallel machine like the CM-5 is well-suited for finite-difference methods on structured grids. The regular pattern of connections of a structured mesh maps well onto the architecture of the machine. So the first design choice, finite differences on a structured mesh, is natural. We use centered differences in space, with added artificial dissipation terms. When numerically solving the Navier-Stokes equations, there are liable to be some mesh cells near a solid body that are small in at least one direction. This mesh cell geometry can impose a very severe CFL (Courant-Friedrichs-Lewy) condition on the time step for explicit time-stepping methods. Thus, though explicit time-stepping is well-suited to the architecture of the machine, we have adopted implicit time-stepping. We have further taken the approximate factorization approach. This creates the need to solve large banded linear systems and creates the first possible barrier to an efficient algorithm. To overcome this first possible barrier we have considered two options. The first is just to solve the banded linear systems with data spread over the whole machine, using whatever fast method is available. This option is adequate for solving scalar tridiagonal systems, but for scalar pentadiagonal or block tridiagonal systems it is somewhat slower than desired. The second option is to 'transpose' the flow and geometry variables as part of the time-stepping process: Start with x-lines of data in-processor. Form explicit terms in x, then transpose so y-lines of data are in-processor. Form explicit terms in y, then transpose so z-lines are in processor. Form explicit terms in z, then solve linear systems in the z-direction. Transpose to the y-direction, then solve linear systems in the y-direction. Finally transpose to the x direction and solve linear systems in the x-direction. This strategy avoids inter-processor communication when differencing and solving linear systems, but requires a large amount of communication when doing the transposes. The transpose method is more efficient than the non-transpose strategy when dealing with scalar pentadiagonal or block tridiagonal systems. For handling geometrically complex problems the chimera strategy was adopted. For multiple zone cases we compute on each zone sequentially (using the whole parallel machine), then send the chimera interpolation data to a distributed data structure (array) laid out over the whole machine. This information transfer implies an irregular communication pattern, and is the second possible barrier to an efficient algorithm. We have implemented these ideas on the CM-5 using CMF (Connection Machine Fortran), a data parallel language which combines elements of Fortran 90 and certain extensions, and which bears a strong similarity to High Performance Fortran. We make use of the Connection Machine Scientific Software Library (CMSSL) for the linear solver and array transpose operations.

Jespersen, Dennis C.↗
NASA NTRS1983

Repeated-Measures Analysis of Image Data

It is suggested that using a modified analysis of variance procedure on data sampled systematically from a rectangular array of image data can provide a measure of homogeneity of means over that array in single directions and how variation in perpendicular directions interact. The modification of analysis of variance required to account for spatial correlation is described theoretically and numerically on simulated data.

Newton, H. J.↗
NASA NTRS1985

Iterative solution of large, sparse linear systems on a static data flow architecture - Performance studies

The applicability of static data flow architectures to the iterative solution of sparse linear systems of equations is investigated. An analytic performance model of a static data flow computation is developed. This model includes both spatial parallelism, concurrent execution in multiple PE's, and pipelining, the streaming of data from array memories through the PE's. The performance model is used to analyze a row partitioned iterative algorithm for solving sparse linear systems of algebraic equations. Based on this analysis, design parameters for the static data flow architecture as a function of matrix sparsity and dimension are proposed.

Reed, D. A.↗
NASA NTRS2014

Renewable Energy at NASA's Johnson Space Center

NASA's Johnson Space Center has implemented a great number of renewable energy systems. Renewable energy systems are necessary to research and implement if we humans are expected to continue to grow and thrive on this planet. These systems generate energy using renewable sources - water, wind, sun - things that we will not run out of. Johnson Space Center is helping to pave the way by installing and studying various renewable energy systems. The objective of this report will be to examine the completed renewable energy projects at NASA's Johnson Space Center for a time span of ten years, beginning in 2003 and ending in early 2014. This report will analyze the success of each project based on actual vs. projected savings and actual vs. projected efficiency. Additionally, both positive and negative experiences are documented so that lessons may be learned from past experiences. NASA is incorporating renewable energy wherever it can, including into buildings. According to the 2012 JSC Annual Sustainability Report, there are 321,660 square feet of green building space on JSC's campus. The two projects discussed here are major contributors to that statistic. These buildings were designed to meet various Leadership in Energy and Environmental Design (LEED) Certification criteria. LEED Certified buildings use 30 to 50 percent less energy and water compared to non-LEED buildings. The objectives of this project were to examine data from the renewable energy systems in two of the green buildings onsite - Building 12 and Building 20. In Building 12, data was examined from the solar photovoltaic arrays. In Building 20, data was examined from the solar water heater system. By examining the data from the two buildings, it could be determined if the renewable energy systems are operating efficiently. Objectives In Building 12, the data from the solar photovoltaic arrays shows that the system is continuously collecting energy from the sun, as shown by the graph below. Building 12 has two solar inverters, located on the second floor, that collected the data from the solar photovoltaic arrays. The data displayed here is the total energy produced by the system. These are cumulative amounts, so the last point on the graph shows all of the energy collected from the system since the start of its operation. The data shown here was manually collected from the solar inverters. However, the data is also automatically recorded through EBI. Through analysis of both sets of data it was determined that the EBI data was faulty. For example, from the manually collected data it can be determined that a total of 73 kWh of energy was collected between the dates of 1/16/2014 – 1/22/2014. The EBI data reports that approximately 17800 kWh of energy was collected during the same time frame. Not only does this exceed the time frame examined, but it also exceeds the total energy collected from the start of collection as recorded from the inverters. This leads to the belief that there is a malfunction with the automatic recording of the energy. In Building 20, data was examined from the solar water heater dating back many months and found that the pump for the solar water heater system was not operating properly, as exhibited in the graph shown below. The pump operates on a solar energy system, meaning that it collects energy throughout the day from the sun. Because of this, the system would stop operating shortly after the sun set because of a lack of sunlight. At that point, the graph should show a zero flow rate, but as exhibited in the graph below, that is not the case. It is clearly shown that the pump is continuously operating, even during the night. It was also observed that the majority of the time the pump would not turn on at all, despite good weather conditions. This led to the conclusion that the pump is malfunctioning, and needs to be examined and fixed.

McDowall, Lindsay↗
NASA NTRS1979

A method for correlating performance data of a terrestrial solar cell array

An analytical method was proposed for characterizing array power output, in the region of maximum power, as a function of environmental variables. The correlation provided a way of evaluating the output of an array under environmental conditions that differ from those encountered during testing. Power data obtained at one location was used to predict array performance at other locations.

Simon, F. F.↗