Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic orbital”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Atomic electron excitation probabilities during orbital electron capture by the nucleus

Approximate probabilities of electron excitation (shakeup/shakeoff) from various atomic states during nuclear ns electron capture have been calculated in the sudden approximation, using Hartree-Fock wave functions. Total excitation probabilities are much lower than during inner-shell ionization by photons or electrons, and ns states are more likely to be excited than np states. This latter result is borne out by K-alpha X-ray satellite spectra.

Crasemann, B.↗
NASA NTRS1990

Atomic oxygen undercutting of defects on SiO2 protected polyimide solar array blankets

Low Earth Orbital (LEO) atomic oxygen can oxidize SiO2-protected polyimide kapton solar array blanket material which is not totally protected as a result of pinholes or scratches in the SiO2 coatings. The probability of atomic oxygen reaction upon initial impact is low, thus inviting oxidation by secondary impacts. The secondary impacts can produce atomic oxygen undercutting which may lead to coating mechanical failure and ever increasing mass loss rates of kapton. Comparison of undercutting effects in isotropic plasma asher and directed beam tests are reported. These experimental results are compared with computational undercutting profiles based on Monte Carlo methods and their implication on LEO performance of protected polymers.

Banks, Bruce A.↗
NASA NTRS2022

The reliability of the small-core Lanthanide effective core potentials

The reliability of the small-core Lanthanide effective core potentials (ECP) is tested using MF and MF(3), for M=Eu, Gd, Tb, and Yb and the atomic excitation energies for Pr, Nd, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Yb. In some case the ECP and all-electron (AE) results are in good agreement, while in others there are significant difference. The difference are much larger when the segmented basis set is used in conjunction with the ECP than when the atomic natural orbital (ANO) basis set is used. The study of the atoms suggests that problems for lanthanide containing molecules are associated with poor atomic excitation energies in the ECP treatment and even using the ANO basis set does not completely solve the problem. We note that the problem appears to be more severe for density functional approaches than for traditional correlation methods. We suggest that additional studies and new effective core potentials may be required for the Lanthanide atoms.

effective core potentials, atomic excitation, atom↗
NASA NTRS1990

Materials selection for long life in low earth orbit - A critical evaluation of atomic oxygen testing with thermal atom systems

The use of thermal atom test methods as a materials selection and screening technique for low-earth orbit (LEO) spacecraft is critically evaluated. The chemistry and physics of thermal atom environments are compared with the LEO environment. The relative reactivities of a number of materials determined in thermal atom environments are compared with those observed in LEO and in high-quality LEO simulations. Reaction efficiencies (cu cm/atom) measured in a new type of thermal atom apparatus are one-thousandth to one ten-thousandth those observed in LEO, and many materials showing nearly identical reactivities in LEO show relative reactivities differing by as much as a factor of eight in thermal atom systems. A simple phenomenological kinetic model for the reaction of oxygen atoms with organic materials can be used to explain the differences in reactivity in different environments. Certain speciic thermal atom test environments can be used as reliable materials screening tools.

Koontz, S. L.↗
NASA NTRS1997

A Comparison of Atomic Oxygen Degradation in Low Earth Orbit and in a Plasma Etcher

In low Earth orbit (LEO) significant degradation of certain materials occurs from exposure to atomic oxygen (AO). Orbital opportunities to study this degradation for specific materials are limited and expensive. While plasma etchers are commonly used in ground-based studies because of their low cost and convenience, the environment produced in an etcher chamber differs greatly from the LEO environment. Because of the differences in environment, the validity of using etcher data has remained an open question. In this paper, degradation data for 22 materials from the orbital experiment Evaluation of Oxygen Interaction with Materials (EOIM-3) are compared with data from EOIM-3 control specimens exposed in a typical plasma etcher. This comparison indicates that, when carefully considered, plasma etcher results can produce order-of-magnitude estimates of orbital degradation. This allows the etcher to be used to screen unacceptable materials from further, more expensive tests.

Townsend, Jacqueline A.↗
NASA NTRS1991

The structure and energetics of the HCN-HNC transition state

The optimum geometries and quadratic force constants of HCN, HNC and the transition state connecting them have been determined at the single- and double-excitation coupled-cluster (CCSD) and CCSD(T) levels of theory. Energy differences were evaluated using the CCSD and CCSD(T) methods in conjunction with large atomic natural orbital basis sets containing g-type basis functions on the heavy atoms and f-type functions on hydrogen. The most reliable structure obtained for the transition state has bond distances of 1.194, 1.188, and 1.389 A for r(CN), r(CH), and r(NH), respectively. Including a correction for zero-point vibrational energies, the transition state is predicted to be 44.6 + or - 1.0 kcal/mol above the HCN isomer, while HNC is predicted to be 14.4 + or - 1.0 kcal/mol above HCN. The latter value is in excellent agreement with the most recent experimental determination (14.8 + or - 2.0 kcal/mol).

Lee, Timothy J.↗
DOE OSTI2021

3d-Orbital Occupancy Regulated Ir-Co Atomic Pair Toward Superior Bifunctional Oxygen Electrocatalysis

Atomically dispersed metal catalysts are hailed as the most promising catalyst category for oxygen electrocatalysis. However, the challenges in regulating electronic configuration and unveiling the mechanism on the atomic scale are hindering their practical implementation. Herein, we modulate the Co d-orbital electron configuration by constructing the Ir–Co atomic pair toward boosted bifunctional activity. The as-developed dual-atom IrCo–N–C catalyst displays unprecedented activity with a half-wave potential of 0.911 V for oxygen reduction reaction and only 330 mV overpotential at 10 mA cm –2 for oxygen evolution reaction, outperforming the single-atom counterparts as well as the commercial Pt/C and Ir/C benchmarks. The impressive bifunctionality is also verified in a Zn–air battery prototype with an ultra-high cyclability over 450 cycles. Furthermore, theoretical calculations are performed to shed light on the synergetic effects of the atomic pair site, where the incorporation of Ir atom alters the d-orbital energy level of Co and thus induces the re-arrangement of d-electron toward intensified spin polarization. As a result, the lower occupancy of d z 2 orbital facilitates the electron acceptation from oxygen to form a stronger Co–O σ bond, thereby propelling faster reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Interaction of atomic oxygen with solid surfaces at orbital altitudes (A0114)

The basic approach to this experiment is to expose a wide variety of material surfaces to the atomic flux in orbit. The experiment is passive and depends on preflight and postflight measurements of the test surfaces in the laboratory. The experiment will also include a reflectometer device to measure atomic beam reflection angles and thus momentum accommodations, and a unique passive spacecraft attitude sensor. Samples consisting of solid disks or thin film coatings on substrate disks will be mounted in a panel. The face of this panel will be flown on Long Duration Exposure Facility normal to the incident stream of oxygen atoms. Each disk will have part of its front surface masked so exposure to the atomic-oxygen reaction will be limited to selected areas, the shadowed areas being used as control surfaces in the measurements. A typical sample is an optically flat quartz disk overcoated with a film of the material of interest. These include Ag, Au, Pt, Nb, Ni, Al, C, Si, Ge, LiF, and a few engineering materials. Some materials for which the expected removal rate is high, such as carbon, will be solid disks rather than thin films.

Gregory, J. C.↗
NASA NTRS1987

Degradation mechanisms of materials for large space systems in low Earth orbit

Degradation was explored of various materials used in aerospace vehicles after severe loss of polymeric material coatings (Kapton) was observed on an early shuttle flight in low Earth orbit. Since atomic oxygen is the major component of the atmosphere at 300 km, and the shuttle's orbital velocity produced relative motion corresponding to approx. 5 eV of oxygen energy, it was natural to attribute much of this degradation to oxygen interaction. This assumption was tested using large volume vacuum systems and ion beam sources, in an exploratory effort to produce atomic oxygen of the appropriate energy, and to observe mass loss from various samples as well as optical radiation. Several investigations were initiated and the results of these investigations are presented in four papers. These papers are summarized. They are entitled: (1) The Space Shuttle Glow; (2) Laboratory Degradation of Kapton in a Low Energy Oxygen Ion Beam; (3) The Energy Dependence and Surface Morphology of Kapton Degradation Under Atomic Oxygen Bombardment; and (4) Surface Analysis of STS 8 Samples.

Gordon, William L.↗
NASA NTRS1991

Analysis of surfaces from the LDEF A0114, phase 4

Progress made from 1 Mar. to 31 Aug. 1991 is presented. The work concentrated on profilometry measurements of eroded and corroded sample surfaces, optical transmission measurements, analysis of the pinhole camera, and x-ray photoelectron spectroscopic (XPS) analysis of some samples. The following papers are presented: (1) observation of Be-7 on the surface of the Long Duration Exposure Facility (LDEF) Spacecraft; (2) measurement of the passive attitude control performance of a recovered spacecraft; (3) effects on LDEF exposed copper flim and bulk; (4) measurements of erosion characteristics for metal and polymer surfaces using profilometry; (5) the interactions of atmospheric cosmogenic radionuclides with spacecraft surfaces; (6) pinhole cameras as sensors for atomic oxygen in orbit; and (7) interaction of atomic oxygen with solid surfaces in low earth orbit- results from LDEF experiment A0114.

Gregory, John C.↗
NASA NTRS1983

On the nature of the bonding in Cu2 - An ab initio viewpoint

The bonding in Cu2 has been calculatively investigated. A CASSCF calculation is performed where the two 4s electrons are distributed in all possible ways among the 4s and 4p orbitals. The CAS results have a 3d population of 9.99. The corresponding orbitals between the CAS core orbitals at r(e) and the atomic SCF core orbitals show an overlap of 13.9992 out of a possible 14, with all of the change in sigma space. Thus, the CAS results show virtually no change in the d orbitals relative to the atom and can be considered as showing only a single bond. The reduction in 3d population, the decrease in r(e), and the increase in D(e) upon correlating the 3d shell indicates that the 3d electrons are slightly involved in the bonding, but there is no indication of the formation of a triple bond.

Bauschlicher, C. W., Jr.↗
DOE OSTI2024

A new computational framework for spinor-based relativistic exact two-component calculations using contracted basis functions

Here, a new computational framework for spinor-based relativistic exact two-component (X2C) calculations is developed using contracted basis sets with a spin–orbit contraction scheme. Generally contracted, j-adapted basis sets of p-block elements using primitive functions in the correlation-consistent basis sets are constructed for the X2C Hamiltonian with atomic mean-field spin–orbit integrals (the X2CAMF scheme). The contraction coefficients are taken from atomic X2CAMF Hartree–Fock spinors, thereby following the simple concept of a linear combination of atomic orbitals. Benchmark calculations of spin–orbit splittings, equilibrium bond lengths, and harmonic vibrational frequencies demonstrate the accuracy and efficacy of the j-adapted spin–orbit contraction scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

Gravitational Redshift in a Local Freely Falling Frame: A Proposed New Null Test of the Equivalence Principle

We consider the gravitational redshift effect measured by an observer in a local freely failing frame (LFFF) in the gravitational field of a massive body. For purely metric theories of gravity, the metric in a LFFF is expected to differ from that of flat spacetime by only "tidal" terms of order (GM/c(exp 2)R)(r'/R )(exp 2), where R is the distance of the observer from the massive body, and r' is the coordinate separation relative to the origin of the LFFF. A simple derivation shows that a violation of the equivalence principle for certain types of "clocks" could lead to a larger apparent redshift effect of order (1 - alpha)(G M/c(exp 2)R)(r'/R), where alpha parametrizes the violation (alpha = 1 for purely metric theories, such as general relativity). Therefore, redshift experiments in a LFFF with separated clocks can provide a new null test of the equivalence principle. With presently available technology, it is possible to reach an accuracy of 0.01% in the gravitational field of the Sun using an atomic clock orbiting the Earth. A 1% test in the gravitational field of the galaxy would be possible if an atomic frequency standard were flown on a space mission to the outer solar system.

Krisher, Timothy P.↗
DOE OSTI2025

Electron capture of superheavy nuclei with realistic lepton wave functions

The superheavy nuclei push the periodic table of the elements and the chart of the nuclides to their limits, providing a unique laboratory for studies of the electron-nucleus interactions. The most important weak decay mode in known superheavy nuclei is electron capture (EC). In the standard calculations of EC, the lepton wave functions are usually considered in the lowest-order approximation. In this work, we investigate the sensitivity of EC rates on the choice of the electron wave functions by (i) assuming the single-particle approximation for the electron wave functions, and (ii) carrying out Dirac-Hartree-Fock (DHF) calculations. The nuclear response is generated based on the state-of-the-art quasiparticle random phase approximation employing relativistic nuclear energy density functional theory. Here, we show that using the improved lepton wave functions reduces the EC rates up to 40% in the superheavy nucleus oganesson (𝑍=118). Interestingly, because of screening effects, the difference between the EC rates obtained with the DHF and single-particle calculations is fairly small.

Atomic orbital↗
DOE OSTI2020

A cautionary tale: Problems in the valence-CASSCF description of the ground state (X1Σ+) of BF

In the full optimized reaction space and valence-complete active space self-consistent field (vCAS) methods, a set of active orbitals is defined as the union of the valence orbitals on the atoms, all possible configurations involving the active orbitals are generated, and the orbitals and configuration coefficients are self-consistently optimized. Such wave functions have tremendous flexibility, which makes these methods incredibly powerful but can also lead to inconsistencies in the description of the electronic structure of molecules. In this paper, the problems that can arise in vCAS calculations are illustrated by calculations on the BH and BF molecules. BH is well described by the full vCAS wave function, which accounts for molecular dissociation and 2s–2p near-degeneracy in the boron atom. The same is not true for the full vCAS wave function for BF. There is mixing of core and active orbitals at short internuclear distances and swapping of core and active orbitals at large internuclear distances. In addition, the virtual 2π orbitals, which were included in the active space to account for the 2s–2p near degeneracy effect, are used instead to describe radial correlation of the electrons in the F2pπ-like pairs. Although the above changes lead to lower vCAS energies, they lead to higher vCAS+1+2 energies as well as irregularities and/or discontinuities in the potential energy curves. All of the above problems can be addressed by using the spin-coupled generalized valence bond-inspired vCAS wave function for BF, which includes only a subset of the atomic valence orbitals in the active space.

Xu, Lu T. (ORCID:0000000182064902)↗
NASA NTRS1989

Theoretical characterization of selected regions of the ground state potential surface of N2H2

The results of CASSCF/multireference contracted CI calculations with large atomic natural orbital basis sets are presented for selected regions of the N2H2 potential surface. The calculations focused on the addition of an H atom to HN2. This process involves four channels. Approach of the H atom along the HN bond leads to N2 + H2 with no barrier (H abstraction), while approach of the H atom to the other three positions leads to trans-HNNH, cis-HNNH, and NNH2, which are stable minima. These calculations provide the most accurate energetics for these three stable species obtained to date. Combining the results of these calculations with previous results for HN2 provides accurate thermochemical data on these important molecules.

Walch, Stephen P.↗