SEARCH · Search NASA
Results for “atomistic simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Atomistic simulations predict a surprising variety of morphologies in precise ionomers.
Abstract not provided.
Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order
Abstract Refractory high-entropy alloys (RHEAs) are designed for high elevated-temperature strength, with both edge and screw dislocations playing an important role for plastic deformation. However, they can also display a significant energetic driving force for chemical short-range ordering (SRO). Here, we investigate mechanisms underlying the mobilities of screw and edge dislocations in the body-centered cubic MoNbTaW RHEA over a wide temperature range using extensive molecular dynamics simulations based on a highly-accurate machine-learning interatomic potential. Further, we specifically evaluate how these mechanisms are affected by the presence of SRO. The mobility of edge dislocations is found to be enhanced by the presence of SRO, whereas the rate of double-kink nucleation in the motion of screw dislocations is reduced, although this influence of SRO appears to be attenuated at increasing temperature. Independent of the presence of SRO, a cross-slip locking mechanism is observed for the motion of screws, which provides for extra strengthening for refractory high-entropy alloy system.
Thermodynamics of high-pressure ice phases explored with atomistic simulations
Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our large-scale molecular-dynamics simulations with a machine-learning potential indicate that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII" has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, the transformation between ice X and the Pbcm phase has a sharp structural change but no apparent activation barrier, whilst at higher pressures the barrier gradually increases. Our study thus clarifies the phase behaviour of the high-pressure ices and reveals peculiar solid–solid transition mechanisms not known in other systems.
Atomistic simulations of the Escherichia coli ribosome provide selection criteria for translationally active substrates
As genetic code expansion advances beyond l-α-amino acids to backbone modifications and new polymerization chemistries, delineating what substrates the ribosome can accommodate remains a challenge. The Escherichia coli ribosome tolerates non-l-α-amino acids in vitro, but few structural insights that explain how are available, and the boundary conditions for efficient bond formation are so far unknown. Here we determine a high-resolution cryogenic electron microscopy structure of the E. coli ribosome containing α-amino acid monomers and use metadynamics simulations to define energy surface minima and understand incorporation efficiencies. Reactive monomers across diverse structural classes favour a conformational space where the aminoacyl-tRNA nucleophile is <4 Å from the peptidyl-tRNA carbonyl with a Bürgi–Dunitz angle of 76–115°. Monomers with free energy minima that fall outside this conformational space do not react efficiently. This insight should accelerate the in vivo and in vitro ribosomal synthesis of sequence-defined, non-peptide heterooligomers.
Understanding the relation between stress and surface morphology in sputtered films: Atomistic simulations and experiments
The relation between stress evolution and surface morphology during deposition of sputtered films is examined by combining kinetic Monte Carlo simulations and stress measurements. We find that the surface morphology is susceptible to an instability, which transforms from layer-by-layer growth to the formation of pillarlike columns. The gaps between these columns prevent complete densification and can lead to a network of pores in the layer. We propose that the formation of this structure changes the stress in the growing layers from compressive to tensile.
Atomistic simulations of Au-silica nanocomposite film growth
The growth of Au-silica nanocomposite film is simulated in the framework of kinetic three dimensional lattice Monte Carlo simulations considering the basic phenomena in the deposition process. In case of co-sputter deposition, the growth kinetics of nanoparticles has been studied taking into consideration the effect of the energetic sputtered species reaching the surface of the film during deposition. Formation of Au nanorod like structures are predicted under certain growth conditions particularly when surface diffusion assisted phase separation plays the dominant role and bulk kinetics is frozen. The observed dependence of the Au nanoparticle size on Au/silica ratio is in agreement with the experimental results.
Atomistic simulation of damage production by atomic and molecular ion irradiation in GaN
We have studied defect production during single atomic and molecular ion irradiation having an energy of 50 eV/amu in GaN by molecular dynamics simulations. Enhanced defect recombination is found in GaN, in accordance with experimental data. Instantaneous damage shows non-linearity with different molecular projectile and increasing molecular mass. Number of instantaneous defects produced by the PF{sub 4} molecule close to target surface is four times higher than that for PF{sub 2} molecule and three times higher than that calculated as a sum of the damage produced by one P and four F ion irradiation (P+4 Multiplication-Sign F). We explain this non-linearity by energy spike due to molecular effects. On the contrary, final damage created by PF{sub 4} and PF{sub 2} shows a linear pattern when the sample cools down. Total numbers of defects produced by Ag and PF{sub 4} having similar atomic masses are comparable. However, defect-depth distributions produced by these species are quite different, also indicating molecular effect.
Nano-hillock formation in diamond-like carbon induced by swift heavy projectiles in the electronic stopping regime: Experiments and atomistic simulations
The formation of surface hillocks in diamond-like carbon is studied experimentally and by means of large-scale molecular dynamics simulations with 5 Multiplication-Sign 10{sup 6} atoms combined with a thermal spike model. The irradiation experiments with swift heavy ions cover a large electronic stopping range between {approx}12 and 72 keV/nm. Both experiments and simulations show that beyond a stopping power threshold, the hillock height increases linearly with the electronic stopping, and agree extremely well assuming an efficiency of approximately 20% in the transfer of electronic energy to the lattice. The simulations also show a transition of sp{sup 3} to sp{sup 2} bonding along the tracks with the hillocks containing almost no sp{sup 3} contribution.
Atomistic simulations, mesoscopic modeling, and theoretical analysis of thermal conductivity of bundles composed of carbon nanotubes
We report that the propensity of carbon nanotubes (CNTs) to self-organize into continuous networks of bundles has direct implications for thermal transport properties of CNT network materials and defines the importance of clear understanding of the mechanisms and scaling laws governing the heat transfer within the primary building blocks of the network structures—close-packed bundles of CNTs. A comprehensive study of the thermal conductivity of CNT bundles is performed with a combination of non-equilibrium molecular dynamics (MD) simulations of heat transfer between adjacent CNTs and the intrinsic conductivity of CNTs in a bundle with a theoretical analysis that reveals the connections between the structure and thermal transport properties of CNT bundles. The results of MD simulations of heat transfer in CNT bundles consisting of up to 7 CNTs suggest that, contrary to the widespread notion of strongly reduced conductivity of CNTs in bundles, van der Waals interactions between defect-free well-aligned CNTs in a bundle have negligible effect on the intrinsic conductivity of the CNTs. The simulations of inter-tube heat conduction performed for partially overlapping parallel CNTs indicate that the conductance through the overlap region is proportional to the length of the overlap for CNTs and CNT-CNT overlaps longer than several tens of nm. Based on the predictions of the MD simulations, a mesoscopic-level model is developed and applied for theoretical analysis and numerical modeling of heat transfer in bundles consisting of CNTs with infinitely large and finite intrinsic thermal conductivities. The general scaling laws predicting the quadratic dependence of the bundle conductivity on the length of individual CNTs in the case when the thermal transport is controlled by the inter-tube conductance and the independence of the CNT length in another limiting case when the intrinsic conductivity of CNTs plays the dominant role are derived. Lastly, an application of the scaling laws to bundles of single-walled (10,10) CNTs reveals that the transition from inter-tube-conductance-dominated to intrinsic-conductivity-dominated thermal transport in CNT bundles occurs in a practically important range of CNT length from ~20 nm to ~4 μm.
Atomistic simulation of surface functionalization on the interfacial properties of graphene-polymer nanocomposites
Graphene has been increasingly used as nano sized fillers to create a broad range of nanocomposites with exceptional properties. The interfaces between fillers and matrix play a critical role in dictating the overall performance of a composite. However, the load transfer mechanism along graphene-polymer interface has not been well understood. In this study, we conducted molecular dynamics simulations to investigate the influence of surface functionalization and layer length on the interfacial load transfer in graphene-polymer nanocomposites. The simulation results show that oxygen-functionalized graphene leads to larger interfacial shear force than hydrogen-functionalized and pristine ones during pull-out process. The increase of oxygen coverage and layer length enhances interfacial shear force. Further increase of oxygen coverage to about 7% leads to a saturated interfacial shear force. A model was also established to demonstrate that the mechanism of interfacial load transfer consists of two contributing parts, including the formation of new surface and relative sliding along the interface. These results are believed to be useful in development of new graphene-based nanocomposites with better interfacial properties.
Atomistic simulation of the electronic states of adatoms in monolayer MoS{sub 2}
Using an ab initio density functional theory based electronic structure method, we study the effects of adatoms on the electronic properties of monolayer transition metal dichalcogenide Molybdenum-disulfide (MoS{sub 2}). We consider the 1st (Li, Na, K) and 7th (F, Cl, Br) column atoms and metals (Sc, Ti, Ta, Mo, Pd, Pt, Ag, Au). Three high symmetry sites for the adatom on the surface of monolayer MoS{sub 2} are examined as starting points to search for the most energetically stable configuration for each adatom-monolayer MoS{sub 2} system, as well as the type of associated bonding. For the most stable adatom positions, we characterize the emergence of adatom-induced electronic states including any dopant states.
Investigation of the thermal stability of Cu nanowires using atomistic simulations
We present a method for determining the melting point of copper nanowires based on classical molecular dynamics simulations and use it to investigate the dependence of the melting point on wire diameter. The melting point is determined as the temperature at which there is a significant change in the fraction of liquid atoms in the wire, according to atomic bond angle analysis. The results for the wires with diameters in the range 1.5 nm to 20 nm show that the melting point is inversely proportional to the diameter while the cross-sectional shape of the wire does not have a significant impact. Comparison of results obtained using different potentials show that while the absolute values of the melting points may differ substantially, the melting point depression is similar for all potentials. The obtained results are consistent with predictions based on the semi-empirical liquid drop model.
Atomistic simulation of Er irradiation induced defects in GaN nanowires
Classical molecular dynamics simulation was used to irradiate a GaN nanowire with rear-earth erbium (Er). Ten cumulative irradiations were done using an ion energy of 37.5 keV on a 10 × 10 nm²surface area which corresponds to a fluence of 1 × 10¹³ cm⁻². We studied the location and types of defects produced in the irradiation. Er implantation leads to a net positive (expansion) strain in the nanowire and especially at the top region a clear expansion has been observed in the lateral and axial directions. The lattice expansion is due to the hydrostatic strain imposed by a large number of radiation induced defects at the top of the NW. Due to the large surface-to-volume ratio, most of the defects were concentrated at the surface region, which suggests that the experimentally observed yellow luminescence (YL) in ion implanted GaN NWs arises from surface defects. We observed big clusters of point defects and vacancy clusters which are correlated with stable lattice strain and the YL band, respectively.
Atomistic simulations of nanowelding of single-crystal and amorphous gold nanowires
The mechanism and quality of the welding of single-crystal (SC) and amorphous gold nanowires (NWs) with head-to-head contact are studied using molecular dynamics simulations based on the second-moment approximation of the many-body tight-binding potential. The results are discussed in terms of atomic trajectories, slip vectors, stress, and radial distribution function. Simulation results show that the alignment for the amorphous NWs during welding is easier than that for the SC NWs due to the former's relatively stable geometry. A few dislocations nucleate and propagate on the (111) close-packed plane (slip plane) inside the SC NWs during the welding and stretching processes. During welding, an incomplete jointing area first forms through the interactions of the van der Waals attractive force, and the jointing area increases with increasing extent of contact between the two NWs. A crystallization transition region forms in the jointing area for the welding of SC-amorphous or amorphous-SC NWs. With increasing interference, an amorphous gold NW shortens more than does a SC gold NW due to the former's relatively poor strength. The pressure required for welding decreases with increasing temperature.
Atomistic simulation of damage accumulation and amorphization in Ge
Damage accumulation and amorphization mechanisms by means of ion implantation in Ge are studied using Kinetic Monte Carlo and Binary Collision Approximation techniques. Such mechanisms are investigated through different stages of damage accumulation taking place in the implantation process: from point defect generation and cluster formation up to full amorphization of Ge layers. We propose a damage concentration amorphization threshold for Ge of ∼1.3 × 10{sup 22} cm{sup −3} which is independent on the implantation conditions. Recombination energy barriers depending on amorphous pocket sizes are provided. This leads to an explanation of the reported distinct behavior of the damage generated by different ions. We have also observed that the dissolution of clusters plays an important role for relatively high temperatures and fluences. The model is able to explain and predict different damage generation regimes, amount of generated damage, and extension of amorphous layers in Ge for different ions and implantation conditions.
Communication: Equilibrium rate coefficients from atomistic simulations: The O({sup 3}P) + NO({sup 2}Π) → O{sub 2}(X{sup 3}Σ{sub g}{sup −}) + N({sup 4}S) reaction at temperatures relevant to the hypersonic flight regime
The O({sup 3}P) + NO({sup 2}Π) → O{sub 2}(X{sup 3}Σ{sub g}{sup −}) + N({sup 4}S) reaction is among the N- and O- involving reactions that dominate the energetics of the reactive air flow around spacecraft during hypersonic atmospheric re-entry. In this regime, the temperature in the bow shock typically ranges from 1000 to 20 000 K. The forward and reverse rate coefficients for this reaction derived directly from trajectory calculations over this range of temperature are reported in this letter. Results compare well with the established equilibrium constants for the same reaction from thermodynamic quantities derived from spectroscopy in the gas phase which paves the way for large-scale in silico investigations of equilibrium rates under extreme conditions.