Search NASA⌕ Search

SEARCH · Search NASA

Results for “backscatter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Coherent Effects in Microwave Backscattering Models for Forest Canopies

In modeling forest canopies, several scattering mechanisms are taken into account: 1) volume scattering, 2) surface-volume interaction, and 3) surface scattering from forest floor. Depending on the structural and dielectric characteristics of forest canopies, the relative contribution of each mechanism in the total backscatter signal of an imaging radar can vary. In this paper, two commonly used first order discrete scattering models, Distorted Born Approximation (DBA) and Radiative Transfer (RT) are used to simulate the backscattered power received by polarimetric radars at P-, L-, and C-bands over coniferous and deciduous forests. The difference between the two models resides on the coherent effect in the surface-volume interaction terms.

Microwave Backscattering Models↗
NASA NTRS1994

(abstract) Measurement of Aerodynamic Roughness Using Radar Backscatter over Vegetated Surfaces

Gathering of local information from remote platforms is often a more cost-effective way of obtaining the required data type than are local measurements. A good example is the collection of wind regime data in order to infer the amount and type of aeolian transport at a given site. This paper describes a potential mechanism for remotely inferring the wind regime from synthetic aperture radar data and describes a project to estimate the practicality of using such a mechanism. Both radar backscatter and wind flow are functions of the roughness of the site under study. It is therefore reasonable to suspect that a fairly well-behaved relationship might exist between normalized radar backscatter coefficient and aerodynamic roughness length. Aeolian transport of small particles depends in turn on wind flow and is an important quantity to measure for several economic-related reasons, but the direct measurement of wind flow regime generally involves construction of wind towers and many days of data collection, making such data extremely expensive and prohibitive in areas that cannot be easily accessed. For both desert and vegetated sites where extensive wind profile data already exist, a NASA airborne multifrequency, multipolarization radar was used to acquire radar data at several incidence angles. At the vegetated sites, vegetation height varied from tens of centimeters to several meters, and surface roughness was a few centimeters.

radar↗
NASA NTRS2021

Development and Validation of an Empirical Ocean Color Algorithm with Uncertainties: A Case Study with the Particulate Backscattering Coefficient

We explored how algorithm (model) and in situ measurement (observation) uncertainties can effectively be incorporated into empirical ocean color model development and assessment. In this study we focused on methods for deriving the particulate backscattering coefficient at 555 nm, b(bp)(555)/(m). We developed a simple empirical algorithm for deriving b(bp)(555) as a function of a remote sensing reflectance line height (LH) metric. Model training was performed using a high-quality bio-optical dataset that contains coincident in situ measurements of the spectral remote sensing reflectances, R(rs)(λ)/(sr), and the spectral particulate backscattering coefficients, b(bp)(λ). The LH metric used is defined as the magnitude of Rrs(555) relative to a linear baseline drawn between R(rs)(490) and R(rs)(670). Using an independent validation dataset, we compared the skill of the LH-based model with two other models. We used contemporary validation metrics, including bias and mean absolute error (MAE), that were corrected for model and observation uncertainties. The results demonstrated that measurement uncertainties do indeed impact contemporary validation metrics such as mean bias and MAE. Zeta-scores and z-tests for overlapping confidence intervals were also explored as potential methods for assessing model skill.

ocean color↗
NASA NTRSDate not supplied

NASA GSFC Elastic Backscatter Lidar Efforts Relevant to EarthCARE Calibration/Validation and Synergistic Data Products

At NASA Goddard Space Flight Center (GSFC), several airborne elastic backscatter lidar instruments have been developed to measure vertical profiles of aerosols and cloud in the atmosphere. Here, we present an overview of our airborne capabilities that could be utilized for EarthCare Calibration/Validation through current efforts to leverage joint NASA-ESA field deployments such as the IMPact of Aerosols on Convection in the Tropics (IMPACT). Additionally, GSFC is leading the development of the Atmospheric Lidar Instrument for Clouds and Aerosol Transport (ALICAT) elastic backscatter lidar that is planned to fly in the upcoming NASA Atmosphere Observing System (AOS) Decadal Survey Mission at the end of this decade. We also present an overview of the instrument and potential synergy of data products that could leveraged should the EarthCare and AOS missions overlap.

backscatter↗
NASA NTRS1972

On backscatter from spatially varying surfaces

The theory of radar backscatter from rough (spatially varying) surfaces is discussed. An integral equation developed to describe the radar backscatter from a perfectly conducting surface is applied to nonsmooth surfaces. The results are compared with those obtained by Beckmann as well as those obtained by Wright. Differences between the three solutions are discussed.

Grody, N. C.↗
NASA NTRS1971

Estimation of total ozone from satellite measurements of backscattered ultraviolet earth radiance.

Total ozone is estimated from Nimbus IV satellite measurements of the attenuation of backscattered radiances at wavelengths between 3100 and 3400 A. A measurement of the backscattered radiance at 3800 A, outside the ozone absorption band, is used to determine an equivalent Lambert albedo for the cloud-ground-haze surface viewed by the instrument. The measured relative attenuation at two wavelengths is compared with such values precomputed for a series of standard ozone profiles and corrected for the equivalent Lambert albedo. Total ozone is obtained by interpolation. Two alternative methods are used to assign an equivalent Lambert albedo at the absorbing wavelengths. Total ozone values estimated by these methods are compared with the Dobson (ground-truth) data by linear regression. The available evidence suggests that the true standard error of the satellite data may be 0.015 atm-cm or less for solar zenith angles smaller than 60 deg.

Mateer, C. L.↗
NASA NTRS1972

Sky-wave backscatter - A means for observing our environment at great distances.

During the last five years, much progress has been made in the understanding of sky-wave backscatter. An explanation of the various interacting phenomena is presented, as is a review of the current state of knowledge reflecting recent advances in observational methods and analytic techniques. New narrow-beam antennas, coupled with signal modulations that permit fine resolution in time delay, are beginning to yield information concerning the character of the scatterers, which now can be separately discerned. These narrow beams also permit study of polarization fading from small regions, and this shows promise as a means for learning the distant sea state. Doppler shifts of a fraction of a hertz on signals of tens of megahertz are separable, permitting isolation of sea returns from ground returns by virtue of the Doppler effect resulting from sea-wave speed; this also suggests a potential sea-monitoring principle. Despite these advances, there is little practical application of sky-wave backscatter as a means of environmental monitoring. This lack is attributed to the large remaining gaps in our understanding of the echoes and our inability to interpret the forms of data that can be acquired with equipment of reasonable cost.

Croft, T. A.↗
NASA NTRS1972

Experimental measurements of 2.25-cm backscatter from sea surfaces.

Airborne 2.25-cm wavelength radar backscatter measurements of low-wind-speed sea conditions were obtained off the coast of Texas in January 1971. These data are compared with unpublished NASA 2.25-cm backscatter measurements recorded over the Atlantic in 1970. The two data sets were in general agreement and supported results previously reported by other authors which showed the absence of a saturation effect at this wavelength. Analyses of these data using computerized clustering techniques indicated that a wind speed measurement accuracy of 5-7 knots is an operational potential.

Newton, R. W.↗
NASA NTRS1973

Fading characteristics of panchromatic radar backscatter from selected agricultural targets

An experiment was performed to empirically determine the fading characteristics of backscattered radar signals from four agricultural targets at 9 GHz. After a short review of the statistics of Rayleigh fading backscatter, the data processing method and results of the data are analyzed. Comparison with theory shows adequate agreement with the experimental results, provided of course, the targets are modeled in a correct manner.

Bush, T. F.↗
NASA NTRS1975

Reduced backscattering cross section (Sigma degree) data from the Skylab S-193 radar altimeter

Backscattering cross section per unit scattering area data, reduced from measurements made by the Skylab S-193 radar altimeter over the ocean surface are presented. Descriptions of the altimeter are given where applicable to the measurement process. Analytical solutions are obtained for the flat surface impulse response for the case of a nonsymmetrical antenna pattern. Formulations are developed for converting altimeter AGC outputs into values for the backscattering cross section. Reduced data are presented for Missions SL-2, 3 and 4 for all modes of the altimeter where sufficient calibration existed. The problem of interpreting land scatter data is also discussed. Finally, a comprehensive error analysis of the measurement is presented and worst case random and bias errors are estimated.

Brown, G. S.↗
NASA NTRS1975

Radar backscatter properties of milo and soybeans

The radar backscatter from fields of milo and soybeans was measured with a ground based radar as a function of frequency (8-18 GHz), polarization (HH and VV) and angle of incidence (0 deg-70 deg) during the summer of 1974. Supporting ground truth was gathered contemporaneously with the backscatter data. At nadir sigma deg of milo correlated highly, r = 0.96, with soil moisture in the milo field at 8.6 GHz but decreased to a value of r = 0.78 at a frequency of 17.0 GHz. Correlation studies of the variations of sigma deg with soil moisture in the soybean fields were not possible due to a lack of a meaningful soil moisture dynamic range. At the larger angles of incidence, however, sigma deg of soybeans did appear to be dependent on precipitation. It is suggested this phenomenon was caused by the rain altering plant geometry. In general sigma deg of both milo and soybeans had a relatively small dynamic range at the higher angles of incidence and showed no significant dependence on the measured crop parameters.

Bush, T. F.↗
NASA NTRS1978

User's guide to the Nimbus-4 backscatter ultraviolet experiment data sets

The first year's data from the Nimbus 4 backscatter ultraviolet (BUV) experiment have been archived in the National Space Science Data Center (NSSDC). Backscattered radiances in the ultraviolet measured by the satellite were used to compute the global total ozone for the period April 1970 - April 1971. The data sets now in the NSSDC are the results obtained by the Ozone Processing Team, which has processed the data with the purpose of determining the best quality of the data. There are four basic sets of data available in the NSSDC representing various stages in processing. The primary data base contains organized and cleaned data in telemetry units. The radiance data has had most of the engineering calibrations performed. The detailed total ozone data is the result of computations to obtain the total ozone; the Compressed Total Ozone data is a convenient condensation of the detailed total ozone. Product data sets are also included.

Lowrey, B. E.↗
NASA NTRS1978

Backscatter, anisotropy, and polarization of solar hard X-rays

The problems of anisotropy, polarization, center-to-limb variation of the X-ray spectrum, and Compton backscatter are investigated in a study of solar hard X-rays. Effect of backscatter are found particularly important for anisotropic sources which emit hard X-rays predominantly toward the photosphere; for such anisotropic primary X-ray sources, the observed X-ray flux near 30 keV does not depend significantly on the position of the flare. In addition, the degree of polarization of the sum of the primary and reflected X-rays with energies in the 15 to 30 keV range may be as high as 30%. Determination of the height and anisotropy of the primary X-ray sources from study of the albedo patch is also discussed.

Bai, T.↗
NASA NTRS1979

Lidar backscattering measurements of background stratospheric aerosols

A comparative lidar-dustsonde experiment was conducted in San Angelo, Texas, in May 1974 in order to estimate the uncertainties in stratospheric-aerosol backscatter for the NASA Langley 48-inch lidar system. The lidar calibration and data-analysis procedures are discussed. Results from the Texas experiment indicate random and systematic uncertainties of 35 and 63 percent, respectively, in backscatter from a background stratospheric-aerosol layer at 20 km.

Remsberg, E. E.↗
NASA NTRS1979

Directional spectra of ocean waves from microwave backscatter: A physical optics solution with application to the short-pulse and two-frequency measurement techniques

Two simple microwave radar techniques that are potentially capable of providing routine satellite measurements of the directional spectrum of ocean waves were developed. One technique, the short pulse technique, makes use of very short pulses to resolve ocean surface wave contrast features in the range direction; the other technique, the two frequency correlation technique makes use of coherency in the transmitted waveform to detect the large ocean wave contrast modulation as a beat or mixing frequency in the power backscattered at two closely separated microwave frequencies. A frequency domain analysis of the short pulse and two frequency systems shows that the two measurement systems are essentially duals; they each operate on the generalized (three frequency) fourth-order statistical moment of the surface transfer function in different, but symmetrical ways, and they both measure the same directional contrast modulation spectrum. A three dimensional physical optics solution for the fourth-order moment was obtained for backscatter in the near vertical, specular regime, assuming Gaussian surface statistics.

Jackson, F. C.↗
NASA NTRS1979

Rough surface wavelength measurement through self mixing of Doppler microwave backscatter

A microwave backscatter technique is presented that has the ability to sense the dominant surface wavelength of a random rough surface. The purpose of this technique is to perform this measurement from an aircraft or spacecraft, wherein the horizontal velocity of the radar is an important parameter of the measurement system. Attention will be directed at water surface conditions for which a dominant wavelength can be defined, then the spatial variations of reflectivity will have a two dimensional spectrum that is sufficiently close to that of waves to be useful. The measurement concept is based on the relative motion between the water waves and a nadir looking radar, and the fact that while the instantaneous Doppler frequency at the receiver returned by any elementary group of scatterers on a water wave is monotonically changing, the difference in the Doppler frequency between any two scattering 'patches' stays approximately constant as these waves travel parallel to the major axis of an elliptical antenna footprint. The results of a theoretical analysis and a laboratory experiment with a continuous wave (CW) radar that encompasses several of the largest waves in the illuminated area show how the structure in the Doppler spectrum of the backscattered signal is related to the surface spectrum and its parameters in an especially direct and simple way when an incoherent envelope detector is the receiver.

Weissman, D. E.↗
NASA NTRS1980

Oil film thickness measurement using airborne laser-induced water Raman backscatter

The use of laser-induced water Raman backscatter for remote thin oil film detection and thickness measurement is reported here for the first time. A 337.1-nm nitrogen laser was used to excite the 3400-cm-1 OH stretch band of natural ocean water beneath the oil slick from an altitude of 150 m. The signal strength of the 381-nm water Raman backscatter was always observed to depress when the oil was encountered and then return to its original undepressed value after complete aircraft traversal of the floating slick. After removal of background and oil fluorescence contributions, the ratio of the depressed-to-undepressed airborne water Raman signal intensities, together with laboratory measured oil extinction coefficients, is used to calculate the oil film thickness.

Hoge, F. E.↗