Search NASA⌕ Search

SEARCH · Search NASA

Results for “beryllium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Cryogenic optical tests of a lightweight HIP beryllium mirror

Five interferometric tests were conducted at cryogenic temperatures on a lightweight, 50 cm diameter, hot isostatic pressed (HIP) beryllium mirror in the Ames Research Center (ARC) Cryogenic Optics Test Facility. The purpose of the tests was to determine the stability of the mirror's figure when cooled to cryogenic temperatures. Test temperatures ranged from room ambient to 8 K. One cycle to 8 K and five cycles to 80 K were performed. Optical and thermal test methods are described. Data is presented to show the amount of cryogenic distortion and hysteresis present in the mirror when measured with an earlier, Shack interferometer, and with a newly-acquired, phase-measuring interferometer.

Melugin, Ramsey K.↗
NASA NTRS1989

Solar flare X-ray polarimeter utilizing a large area thin beryllium scattering disk

A model of a solar flare X-ray polarimeter utilizing a large-area thin beryllium scattering disk was developed using Monte Carlo techniques for several classes of solar flares. The solar-flare polarimeter consists of a 30-cm-diam Be disk of about 1/3 of a scattering length thickness, which is surrounded by a cylindrical detector composed of six segmented panels of NaI scintillators, each coupled to 15 photomultiplier tubes. The instrument is sensitive to X-rays from 10 to 100 keV. For a class-M-2 solar flare observed for 10 sec from a balloon at an altitude of 150,000 ft, the minimum detectable polarization at the 99 percent statistical confidence level was found to be 1-6 percent over the energy range 20-100 keV.

Gotthelf, E.↗
NASA NTRS1995

Beryllium and Boron abundances in population II stars

The scientific focus of this program was to undertake UV spectroscopic abundance analyses of extremely metal poor stars with attention to determining abundances of light elements such as beryllium and boron. The abundances are likely to reflect primordial abundances within the early galaxy and help to constrain models for early galactic nucleosynthesis. The general metal abundances of these stars are also important for understanding stellar evolution.

Source record↗
NASA NTRS1994

A new method for failure prediction of SR-200 beryllium sheet structures

Contemporary applications of failure criteria frequently incorporate two-dimensional or simplified three-dimensional methodologies for prediction of stresses. Motivation behind the development of a new multi-dimensional failure criterion is due mainly to the lack of a sufficiently accurate mathematical tool that accounts for the behavior of brittle material with anisotropic properties. Such a criterion should be able to provide a reliable maximum load estimate so that design of the structure is not penalized in terms of excessive weight requirements. The failure criterion developed is represented by a fracture surface in a six-dimensional stress space. The criterion is applied for failure prediction of SR-200 beryllium sheet structures, a non-homogeneous orthotropic material used widely in space applications. Two experiments are used to verify the criterion.

Papados, P. P.↗
NASA NTRS2001

Subscale Beryllium Mirrors Demonstrator (SBMD) Program Summary and Ball Modeling

The SBMD Program was to design, fabricate, and test a 0.5-m beryllium lightweighted mirror applicable to space deployable systems with demanding optical and areal density requirements. This presentation summarizes the program's objectives and the mirror's tested technical performance along with lessons learned. In addition, test results are compared to modeling predictions. The SBMD Program was funded by NASA MSFC.

Kendrick, Stephen↗
NASA NTRS2001

Structural Analysis of a 50 cm Diameter Open-Back Triangular Cell Beryllium Mirror in a Cryogenic Environment

This paper discusses NASTRAN structural analysis of the Sub-Scale Beryllium Mirror Demonstrator (SBMD), which has been developed by Ball Aerospace as an experimental design concept for the Next Generation Space Telescope (NGST). The mirror was repeatedly subjected to 35K environment in the large cryogenic test chamber at Marshall Space Flight Center (MSFC). Deformations on the mirror surface were measured optically. The surface distortions predicted by NASTRAN are analyzed optically for comparison with the measured values. Model results compare favorably with measured results for an ambient temperature validation case. For the cryogenic environment case the influence of geometry and material property variations is being investigated to obtain closer correlation.

Craig, Larry↗
NASA NTRS2001

Structural Analysis of a 50 cm Diameter Open-back Triangular Cell Beryllium Mirror in a Cryogenic Environment

This paper discusses NASTRAN structural analysis of the Sub-Scale Beryllium Mirror Demonstrator (SBMD), which has been developed by Ball Aerospace as an experimental design concept for the Next Generation Space Telescope (NGST). The mirror was repeatedly subjected to 35 K environment in the large cryogenic test chamber at Marshall Space Flight Center. Deformations on the mirror surface were measured optically. The surface distortions predicted by NASTRAN are analyzed optically for comparison with the measured values. Model results compare favorably with measured results for ambient temperature validation cases. For the cryogenic environment case the influence of geometry and material property variations is being investigated to obtain closer correlation.

Craig, Larry↗
NASA NTRS2017

The Beryllium-10 Abundance in an Unusual Hibonite-Perovskite Refractory Inclusion from Allende: Implications for the Origin of Be-10

Beryllium-10 (decays to B-10, t1/2 = t(sub 1/2) = 1.3 Myr) 1.3 Myr) is a radionuclide that exclusively requires a is a radionuclide that exclusively requires a spallation origin. Therefore, one could obtain important insights into the irradiation environment in the solar nebula by understanding the distribution and abundance of this radionuclide in meteoritic inclusions. Most previous data are derived from B isotopic analysis of coarse-grained CV3 Ca-Al-rich Inclusions (CAIs) that have AL-26.Al-27 Al close to the canonical level of 5 x 10 (exp -5) and inferred Be-10/Be-9 ratios between 4 x 10(exp -4) and 1 x 10 (exp -2=3) [1-5]. Al-26-depleted FUN (Fractionaed and Unknown Nuclear anomalies) CAIs are less studied due to their rarity. FUN CAIs are thought to have formed prior to homogenization of Al-26/Al-27 Al and stable isotope anomalies (e.g., Ti-50) in the solar nebula, and thus represent one of the oldest Solar System solids [6]. So far, only three FUN CAIs (Axtell 2771, KT-1 and HAL) from CV3 chondrites have been measured for Be-10. They are characterized by variable Be-10/Be-9 ratios between (2.7−4.4) × 10(exp -4) [4,7]. Another group of rare, Al-26-free and and isotopically more anomalous inclusions, namely platy hibonite crystals (PLACs) from CM2 chondrites, have well-defined Be-10/Be-9 = (5.3 +/- 1.0) x 10 (exp -4) [9]. Al-26-free CAIs appear to have lower Be-1-/Be-9 than Al-26-bearing CAIs, although large analytical errors associated with some data would allow for an apparent overlap. It has been argued that the observed Be-10 variation resulted from the in-situ production of this radionuclide in CAIs (or their precursors) by irradiation, and the ratio difference simply reflects the fluctuation in projectile fluences [e.g., 9]. Another observation in support of this explanation comes from these CAIs' initial B-10/B-11 ratios, most of which are higher than the chondritic value 0.2478 [10]. This has been interpreted as a result of mixing between spallogenic B (B-10/B-11 = 0.4, co-produced with Be-10 in the irradiated solids) and a chondritic component [5,8]. Alternatively, given that all the inferred ratios, most of which are higher than chondritic value 0.2478 [10]. This has been interpreted as a result of mixing between spallogenic B (B-10/B-11 = 0.4, co-produced with Be-10 in the irradiated solics) and a chondritic component [5,8], Alternatively, given that all the inferred ratios in CAIs never fall below 3x10(exp -4), it has been proposed that the Solar System formed with baseline Be-10/Be-9 at this level, which originated from cosmic ray irradiation of the parental molecular cloud, and any value higher than this is a result of additional in-situ spallation [4,11]. Although not explicitly stated in this model, one would expect that inclusions that incorporated the background Be-10 abundance should form with the chondritic B isotopic ratio. However, the three FUN CAIs all have supra-chondritic B-10/B-11 indicative of the presence of a spallogenic component. To test whether some Be-10 did come into the solar nebula by inheritance,a better understanding of Be-10/Be-9 and initial B-10/B-11 in Al-26-free isotopically anomalous samples is needed. Here we present the result of Be10−B-10 system in an unsual hibonite-perovskite inclusion SHAL (son of HAL) from Allende.

Liu, M-C.↗
DOE OSTI2023

Phonon-informed Neural Thermal Scattering (NeTS) Optimization for Crystalline Graphite and Beryllium Metal

Fast neutrons born from fission lose energy through scattering interactions in the process of slowing-down. As neutrons thermalize to the order of $k$ $b$ $T$ (where $k$ $b$ is the Boltzmann constant, and $T$ is the temperature of the medium), their de Broglie wavelength and energy approaches the order of inter-atomic spacing and quantized lattice vibrations, i.e., phonons. At thermal energies, the thermal scattering law (TSL), i.e., $S$($α, β$), captures crystal binding contributions to the total reaction rate, or cross section. This dimensionless material property describes the energy ($β$) and momentum ($α$) exchanges available in a medium. Currently, $S$($α, β$) is evaluated in the Full Law Analysis Scattering System Hub (FLASSH) code for discrete inputs and stored as ENDF/B File 7 for 0-phonon elastic (MT 2) and n-phonon inelastic (MT 4) processes. Further processing recasts $S$($α, β$) into cumulative distribution functions for sampling post-collision scattering kinematics. In practice, interpolation schemes are employed to access data between tabulated values. An improvement to this juncture of the nuclear data pipeline is supplying cross sections on-the-fly (OTF), as has been developed for the un-resolved resonance region to minimize non-physical interpolation errors. This capability may improve simulation accuracy for accident and transient analyses, where rapidly varying changes in temperature and pressure are difficult to predict beforehand. To do so, deep artificial neural networks (ANNs) can be employed which collapse non-linear, complex data into a lightweight dictionary of neural weights and biases. This has been successfully demonstrated for the hydrogen in light water $S$($α, β$) dataset in the form of a Neural Thermal Scattering (NeTS) module. In this work, the NeTS framework is extended to consider the impact of material-dependent dynamical features on optimal neural pre-processing and architecture design decisions, such as number of neurons per hidden layer, residual skip connections and neural depth. New NeTS modules for crystalline graphite and beryllium metal illuminate a novel correlation between dynamical nonlinearity and optimal neural parametrization when deploying $S$($α, β$) on-the-fly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Enhanced graphite neutron reflector with beryllium oxide inclusions

A nuclear reactor is disclosed including a reactor core and a reflector assembly surrounding the reactor core. The reflector assembly includes a stationary reflector component including a graphite support structure comprising a plurality of channels defined therein and a plurality of beryllium-oxide pins positioned in the channels.

Aleshin, Yuriy↗
DOE OSTI2025

Temperature effects on Thermal Neutron Scattering in Beryllium Metal

Many advanced reactor concepts being considered are characterized by a thermal neutron energy spectrum, which traditional light water reactor systems utilized. Beryllium metal, a material with a long-standing operational history in reactor environments, continues to be of significant interest due to its large scattering cross section, low absorption cross section, and well-characterized behavior under irradiation conditions.

GASKET↗
DOE OSTI2023

Atomistic simulations of He bubbles in Beryllium

Formation of He bubbles can have a significant effect on the microstructural evolution and properties of irradiated materials. In this report, we use atomistic simulations based on machine learning potentials to investigate the fundamental behavior of He bubbles in Be, with a specific focus on the shape, stability, and diffusivity of bubbles. Stability of He bubbles is quantified in terms of formation energies, which are determined as a function of the ratio of He/V. We find that He bubbles become unstable with respect to plastic deformation through punch-out dislocations around the bubble when the He/V ratio is larger than ~1.25, and the punch-out process induces the change of the regular bubble shape. In general, the bubble shape of He in Be is found to be ellipsoid-like. It is also found that for a fixed He/V ratio, the bubble attracts vacancies to become larger in size. If the bubble size is constant, the bubble attracts additional He atoms until the punch-out reaction occurs. The dominant diffusion mechanism of He bubbles changes from surface diffusion to volume diffusion as the temperature is increased, with a crossover occurring at about 900 K.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Preliminary Conceptual Design of Nuclear Thermal Rocket Reactor Cores Using Ceramic Fuels with Beryllium or Composite Neutron Moderators

Herein several preliminary conceptual designs of nuclear thermal rocket reactor cores are presented that use tin-bonded monolithic ceramic [mononitride (UN), monocarbide (UC), and uranium dioxide (UO 2 )] fuel plates or pins with molybdenum-tungsten alloy clad. Neutron moderation is provided by a block of Be metal or composite materials using metal hydrides such as ZrH 1.6 or YH 1.6 with different matrices (MgO or Be). Mainly high-assay low-enriched uranium is considered, but highly enriched uranium is also assessed for a few configurations. Nominal core thermal power is 300 MW corresponding to about 66 kN (15 klbf) of thrust, and with minimal modifications, 500 MW may be possible (25 klbf of thrust). Depending on the configurations, the amount of 235 U needed for criticality is 30 to 90 kg, and reactor weight is 2.5 to 3.8 tonnes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Improved scaling law for the prediction of deuterium retention in beryllium co-deposits

Hydrogen isotope co-deposition with Be eroded from the first wall is expected to be the main fusion fuel retention mechanism in ITER. Since good fuel accounting is crucial for economic and safety reasons, reliable predictions of hydrogen isotope retention are needed. Furthermore, this study builds upon the well-established empirical De Temmerman scaling law that predicts D/Be ratios in co-deposited layers based on deposition temperature, deposition rate, and deuterium particle energy. Expanding the data used in the original development of the scaling law with an additional dataset obtained with more recent measurements using a different technique to the original De Temmerman approach, allows us to obtain new values for free parameters and improve the prediction capabilities of the new scaling law. In an effort to improve the model even further, scaling with D 2 background pressure was included and a new two-term model derived, describing D retention in low- and high-energy traps separately.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Thermal Neutron Scattering Law for Beryllium Hydride and Critical Mass Calculations [Slides]

TSLs for H(BeH 2 ) and Be(BeH 2 ) were evaluated in the incoherent approximation using FLASSH. Minimum critical mass estimates were performed using MC21 continuous energy Monte Carlo calculations with the BeH 2 TSLs. Researchers confirmed very low estimated critical mass for BeH 2 -moderated and Be- reflected spheres. These were the lowest critical masses NNL has studied to date. Future work includes relaxation of the incoherent approximation for Be(BeH 2 ). A small increase in critical mass is expected due to increased neutron transmission at sub-Bragg cutoff energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗