Search NASA⌕ Search

SEARCH · Search NASA

Results for “bio oil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗
NASA NTRS2000

Analysis of edible oil processing options for the BIO-Plex advanced life support system

Edible oil is a critical component of the proposed plant-based Advanced Life Support (ALS) diet. Soybean, peanut, and single-cell oil are the oil source options to date. In terrestrial manufacture, oil is ordinarily extracted with hexane, an organic solvent. However, exposed solvents are not permitted in the spacecraft environment or in enclosed human tests by National Aeronautics and Space Administration due to their potential danger and handling difficulty. As a result, alternative oil-processing methods will need to be utilized. Preparation and recovery options include traditional dehulling, crushing, conditioning, and flaking, extrusion, pressing, water extraction, and supercritical extraction. These processing options were evaluated on criteria appropriate to the Advanced Life Support System and BIO-Plex application including: product quality, product stability, waste production, risk, energy needs, labor requirements, utilization of nonrenewable resources, usefulness of by-products, and versatility and mass of equipment to determine the most appropriate ALS edible oil-processing operation.

NASA Discipline Life Support Systems↗
DOE OSTI2021

Online Biogenic Carbon Analysis Enables Refineries to Reduce Carbon Footprint during Coprocessing Biomass- and Petroleum-Derived Liquids

To mitigate green-house gas (GHG) emissions, governments around the world are enacting legislation to reduce carbon intensity in transportation fuels. Coprocessing biomass and petroleum-derived liquids in existing refineries is a near-term, cost-effective approach for introducing renewable carbon in fuels and enabling refineries to meet regulatory mandates. However, coprocessing biomass-derived liquids in refineries results in variable degrees of biogenic carbon incorporation, necessitating accurate quantification to verify compliance with mandates. Existing refinery control and instrumentation systems lack the means to measure renewable carbon accurately, reliably, and quickly. Furthermore, accurate measurement of biogenic carbon is key to ensuring refineries meet regulatory mandates. In this Perspective, we present existing methods for measuring biogenic carbon, point out their challenges, and discuss the need for new online analytical capabilities to measure biogenic carbon in fuel intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Renewable diesel and bio-aromatics production from waste cooking oil using ethanol as a hydrogen donor in deoxygenation reaction

Biofuels offer a promising solution in the fight against climate change. With a global increase in waste cooking oil, this research investigated the production of bio-hydrogenated diesel (BHD) from waste cooking oil, using ethanol as a hydrogen donor in the deoxygenation process. A hydrolyzed waste cooking oil model compound served as the feedstock, and the deoxygenation was performed at 300–400 °C. The catalysts used in the experiments were 2.6 wt% Ni and 7.8 wt% Mo (2.6Ni-7.8Mo) and 10 wt% Ni and 5 wt% Mo (10Ni-5Mo) on γ-Al 2 O 3 . The results showed that ethanol is an effective hydrogen donor for biofuel production without the need for external hydrogen at an elevated pressure. The increasing temperature enhanced the free fatty acid (FFA) conversion and n-alkane selectivity in the oil product, with the highest FFA conversion and alkane selectivity of 100 % and 46 %, respectively, observed at 400 °C for the sulfided 10Ni-5Mo catalyst. On the other hand, 2.6Ni-7.8Mo offers 100 % FFA conversion with a lower n-alkane selectivity of 35 % at identical temperatures. The total acid number (TAN) of the oil products decreased from 174.03 mg KOH/g of feedstock to 9.43 and 8.67 mg KOH/g with the sulfided 2.6Ni-7.8Mo and 10Ni-5Mo catalysts, respectively. Both the catalysts achieved similar heating values (~43 MJ/kg) at 400 °C. This is a significant improvement to the HHV of the feedstock, which was 36.02 MJ/kg. Additionally, aromatic compounds, mainly BTXE (benzene, toluene, xylene, and ethylbenzene), were also produced. Compared to glycerol as a hydrogen donor, ethanol more effectively increased n-alkane selectivity due to its higher effective hydrogen-to-carbon ratio (H/C eff ). Conversely, glycerol was more advantageous for achieving greater selectivity towards BTXE compounds due to its lower H/C eff , which potentially leads to coke formation. Since aromatic compounds are intermediates in coke production, glycerol provides higher aromatic selectivity than ethanol. Finally, this study presents an alternative pathway for producing diesel fuel from waste cooking oil using ethanol as a hydrogen donor.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Biodiesel from oil produced in vegetative tissues of biomass – A review

Biodiesel is a green, renewable alternative to petroleum-derived diesel. However, using vegetable oil for bio- diesel production significantly challenges the food security. Progress in metabolic engineering, understanding of lipid biosynthesis and storage have enabled engineering of vegetative tissues of plants such as sugarcane, sor- ghum, and tobacco for lipid production. Such sources could be cultivated on land resources, which are currently not suitable for row crops. Besides achieving significant lipid accumulation, it is imperative to maintain the fatty acid and lipid profile ideal for biodiesel production and engine performance. In this study, genetic modifications used to induce lipid accumulation in transgenic crops and the proposed strategies for efficient recovery of oil from these crops have been presented. Here, this paper highlights that lipids sourced from vegetative biomass in their native form would pose significant challenges in biodiesel production. Therefore, different strategies have been presented for improving feedstock quality to achieve high-quality biodiesel production.

09 BIOMASS FUELS↗
DOE OSTI2022

Drivers of Thermal Instability of Catalytic Pyrolysis Oils During Hydrotreating and Co-Processing to Sustainable Fuels

This presentation goes over polymerization observed in CFPs driven by thermally labile oxygenates. Lower oxygen oils have improved stability and a few percent decrease in oxygen greatly improves stability. Further improvements could be realized via targeted catalytic development and further reduction in reactive species. High stability CFP will help enable refinery integration of biogenic carbon.

bio-oil↗
DOE OSTI2022

Decontamination of Mixed Paper and Plastic Municipal Solid Waste Increases Low and High Temperature Conversion Yields

With the implementation of China’s Green Fence Policy and the following National Sword Policy, there is a need to divert previously accepted waste materials away from the landfill. Mixed plastic and paper wastes that are too contaminated to be economically recycled can be used for conversion into fuels and products. The effect of common contaminants present in waste streams must be determined to make municipal solid waste (MSW) a viable alternative to agricultural feedstocks for conversion. In this study, MSW was sourced from a dual stream materials recovery facility (MRF) in Emmet County, Michigan and characterized via mass balance. The most common contaminants in mixed paper and plastic were quantified and targeted for decontamination when mixed paper was explored for low temperature conversion pathways and plastics for high temperature conversion pathways. Ink, stickies, and plastic contamination were sorted out of the mixed paper stream and did not have an impact on sugar yields during enzymatic hydrolysis (EH). Although no improvement in yield was found, it was noted that copy paper within the mixed paper stream had an elevated pH and higher concentration of fermentation inhibitors, suggesting that intrinsic properties of some paper types may not be ideal for EH and fermentation conversion. Dilute alkaline pretreatment and mechanical refining of mixed paper increased the EH yield of mixed paper, suggesting this previously established process could be used as a decontamination method. “Dirt” and particulates were washed from mixed plastic using either an aqueous detergent or a non-aqueous chemical washing method. Liquid oil yields were increased during microwave assisted fast pyrolysis. All decontamination techniques met the cost target of less than $30/dry ton with plastic decontamination ranging from $18.16 to $24.81/dry ton. Because dilute alkaline pre-treatment and mechanical refining is considered part of the conversion process, the decontamination cost during feedstock preprocessing was considered $0/dry ton.

09 BIOMASS FUELS↗
DOE OSTI2020

Role of the metal-support interface in the hydrodeoxygenation reaction of phenol

In this paper, the effect of interfacial sites between Pd particles and Nb 2 O 5 species is investigated by testing a series of Pd-Nb 2 O 5 /SiO 2 catalysts with different niobium loadings for the HDO reaction of phenol in the gas phase. Important differences in the selectivity to deoxygenated product were observed depending on the presence of niobium oxide close to Pd particles, which reveals the key role of the type of active phase in the control of reaction steps. It was found that Pd/SiO 2 catalyst promotes hydrogenation pathways, producing cyclohexanone as the major product. For Pd-Nb 2 O 5 /SiO 2 catalyst containing a Nb/Pd molar ratio of 0.5, a sharp increase in the selectivity to benzene is observed (7.5-fold). Increasing the Nb/Pd molar ratio, the formation of benzene is enhanced. The results showed that the Pd-Nb 2 O 5 interface, composed by an oxophilic oxide in the perimeter of the metal particle, is responsible for the activation of the Csingle bondO bond, promoting the deoxygenation reaction.

09 BIOMASS FUELS↗
DOE OSTI2022

Demonstration of low-level biogenic fuel content using quench curve and direct liquid scintillation counting (LSC) methods

In this work, an investigation into the direct method for liquid scintillation counting (LSC) quantification of biogenic fuel content in fuel blendstock is presented. This method development intentionally used a colored matrix (~99 wt%), fossil diesel fraction, and low-level biogenic fractions (~1 wt%) to determine the applicability of the LSC technique in colored blend mixtures. LSC procedures for quench correction, including the use of an instrument internal standard (Quantulus SQP values), color quench curves, and an internal 14 C standard spike on samples containing low-level amounts of biogenic gasoline, jet, and diesel mixed with fossil fuel, were compared. Samples were analyzed on both Perkin-Elmer Quantulus and Tri-Carb instruments, and the 14 C contents were compared with those determined by accelerator mass spectrometry (AMS). Results from the Tri-Carb instrument showed that percent differences of <10 % compared to AMS-reported values are achievable at 5-hour count times despite colored samples. A comparison between the impact of chemical and color quenching in the fuel samples showed that color quenching in highly colored samples reduces efficiency significantly more than chemical quenching, indicating that chemical quench curves are not appropriate for highly colored biofuel/fossil-fuel blended samples. Results indicate that both the direct method with internal spike quench correction and the use of a color-quench curve provide accurate results for 1 % biogenic fuel blends. Additionally, we have explored the use of Fourier transform infrared (FTIR) spectroscopy in measuring the biogenic content of the colored blended fuel samples. Preliminary results show the presence of biogenic carbon-derived fingerprints that are absent in fossil-derived sample. However, further work is needed to develop an FTIR-based quantitative method.

09 BIOMASS FUELS↗
DOE OSTI2021

Challenges and opportunities for alternative fuels in the maritime sector

Amidst a period of historic transformation, the marine shipping sector faces uncertainty regarding its ability to reliably fuel while remaining compliant with new international environmental regulations and targets. Increasingly stringent environmental standards, and heightened regulatory focus on maritime decarbonization are driving infrastructural and technical development for alternative fuels and mixtures, engine concepts, and operating practices. However, the transition to alternative fueling is highly complex and requires both a global outlook that spans diverse stakeholder demographics and coordination with multiple actors across the value chain. To aid stakeholders involved in decision making and research related to the transition, a scoping study was conducted with the goal of outlining the barriers, uncertainties, and possibilities in the short and long term for the transition. Synthesis of these results provides strategic decision support, technical direction, and a set of R&D priorities for maritime stakeholders and the scientific community.

09 BIOMASS FUELS↗
DOE OSTI2026

Conserving asphalt resources: Rethinking rejuvenator performance evaluation through peptizing efficiency

Timely rejuvenation and restoration of asphalt are essential conservation practices that help preserve and extend the service life of roads, bridges, driveways, and parking lots. The performance of asphalt rejuvenators is often assessed based on their diffusion rates and softening power, yet these metrics alone fail to capture true rejuvenation potential. Here, this study integrates density functional theory (DFT) modeling with experimental analysis to show that rejuvenation effectiveness is primarily governed by molecular interactions with oxidized asphaltene nanoaggregates. DFT results revealed that amide- and unsaturated-chain compounds, such as hexadecanamide, oleic acid, and 9,17-octadecadienal, act cooperatively to disrupt π–π stacking and exfoliate asphaltene layers, reducing binding strength and enhancing dispersion. Unlike bulky, rigid molecules that remain trapped, these components remain mobile and repeatedly interact with multiple aggregation sites. Experimental validation using rheometry and FTIR confirmed that such molecularly compatible rejuvenators restore the binder flexibility and polydispersity, even when diffusion is relatively slow. Building on this mechanistic foundation, six rejuvenators (A2, A5, A7, A8, A9, and A10) were evaluated using a three-metric performance framework encompassing cracking resistance (Glover–Rowe parameter), UV stability, and surface hydrophobicity. Among the six rejuvenators evaluated, A9 exhibited the highest overall performance, reducing the Glover–Rowe cracking parameter by 85% (from 351 kPa to 53 kPa), demonstrating the greatest resistance to UV-induced aging with a stability index of 4.17 h·kPa⁻¹, and increasing surface hydrophobicity to a contact angle of 103.6°. Its superior performance is primarily attributed to its amide- and unsaturated-chain components, which act cooperatively to disrupt π–π stacking interactions and exfoliate asphaltene layers, thereby promoting molecular deagglomeration and enhancing long-term durability. These results shift the criteria for selecting rejuvenators: effective candidates must pair the electronic capability to unlock aged asphaltenes with sufficient structural stability to resist secondary aging and restore hydrophobicity. Restoring hydrophobicity is critical, as aging reduces the asphalt’s water repellency and increases water diffusion, which in turn accelerates moisture-related damage; consequently, a high-performing rejuvenator must effectively restore the binder’s hydrophobic characteristic. Collectively, these findings provide a framework for the rational design of next-generation of bio-based rejuvenators that enhance pavement longevity and promote long-term sustainability.

Aging↗
DOE OSTI2021

Predicting Catalytic Pyrolysis Aromatic Selectivity from Pyrolysis Vapor Composition Using Mass Spectra Coupled with Statistical Analysis

The behavior of fast pyrolysis (FP) and catalytic FP (CFP) of 20 renewable feedstocks was studied in a microscale reactor with molecular beam mass spectral analysis of products generated. A partial least-squares (PLS) model was constructed based on the FP vapor spectra that predicts the aromatic selectivity when upgrading over a ZSM-5 catalyst. Additionally, principal component analysis of both FP and CFP spectra was performed for comprehensive spectral analysis. This work highlighted the value of vapor-phase mass spectral screening to predict the subsequent feedstock performance and demonstrated that the quantity of coke deposited on the catalyst is not a reliable measure of catalyst deactivation when the feedstock type is varied.

09 BIOMASS FUELS↗
DOE OSTI2023

Desalting biocrude for improved downstream processing toward marine fuel application

Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.

09 BIOMASS FUELS↗
DOE OSTI2021

Catalytic Fast Pyrolysis for Chemicals: Cooperative Research and Development, CRADA Number CRD-16-00637 (Final Report)

The purpose of this partnership between the ExxonMobil Chemical Company and NREL is to advance the state of the art for converting biomass to liquid hydrocarbons using catalytic fast pyrolysis (CFP), with particular emphasis on directing and improving yields of such liquid hydrocarbons for uses in commodity chemical markets. CFP of biomass is a promising route for the production of renewable fuels and chemicals, and the key driver for economic viability is carbon yield to valuable products. The majority of prior CFP work has been targeted at fuel production, but this CRADA seeks to pursue routes to chemical co-products, thereby enhancing the overall economic viability of CFP. This project is beneficial to the public because it advances a technology that could one day provide renewable fuels and chemicals to our economy, thus improving the sustainability of our transportation and chemical manufacturing sectors.

09 BIOMASS FUELS↗