Search NASA⌕ Search

SEARCH · Search NASA

Results for “bombardment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Implications of Microstructure in Helium-Implanted Nanocrystalline Metals

Helium bubbles are known to form in nuclear reactor structural components when displacement damage occurs in conjunction with helium exposure and/or transmutation. If left unchecked, bubble production can cause swelling, blistering, and embrittlement, all of which substantially degrade materials and—moreover—diminish mechanical properties. On the mission to produce more robust materials, nanocrystalline (NC) metals show great potential and are postulated to exhibit superior radiation resistance due to their high defect and particle sink densities; however, much is still unknown about the mechanisms of defect evolution in these systems under extreme conditions. Here, the performances of NC nickel (Ni) and iron (Fe) are investigated under helium bombardment via transmission electron microscopy (TEM). Bubble density statistics are measured as a function of grain size in specimens implanted under similar conditions. While the overall trends revealed an increase in bubble density up to saturation in both samples, bubble density in Fe was over 300% greater than in Ni. To interrogate the kinetics of helium diffusion and trapping, a rate theory model is developed that substantiates that helium is more readily captured within grains in helium-vacancy complexes in NC Fe, whereas helium is more prone to traversing the grain matrices and migrating to GBs in NC Ni. Our results suggest that (1) grain boundaries can affect bubble swelling in grain matrices significantly and can have a dominant effect over crystal structure, and (2) an NC-Ni-based material can yield superior resistance to irradiation-induced bubble growth compared to an NC-Fe-based material and exhibits high potential for use in extreme environments where swelling due to He bubble formation is of significant concern.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials

Tungsten (W) and W alloys are considered as primary candidates for plasma-facing components (PFCs) that must perform in severe environments in terms of temperature, neutron fluxes, plasma effects, and irradiation bombardment. These materials are notoriously difficult to produce using additive manufacturing (AM) methods due to issues inherent to these techniques. The progress on applying AM techniques to W-based PFC applications is reviewed and the technical issues in selected manufacturing methods are discussed in this review. Specifically, we focus on the recent development and applications of laser powder bed fusion (LPBF), electron beam melting (EBM), and direct energy deposition (DED) in W materials due to their abilities to preserve the properties of W as potential PFCs. Additionally, the existing literature on irradiation effects on W and W alloys is surveyed, with possible solutions to those issues therein addressed. Finally, the gaps in possible future research on additively manufactured W are identified and outlined.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Compositional Effects of Additively Manufactured Refractory High-Entropy Alloys under High-Energy Helium Irradiation

High-Entropy Alloys (HEAs) are proposed as materials for a variety of extreme environments, including both fission and fusion radiation applications. To withstand these harsh environments, materials processing must be tailored to their given application, now achieved through additive manufacturing processes. However, radiation application opportunities remain limited due to an incomplete understanding of the effects of irradiation on HEA performance. In this letter, we investigate the response of additively manufactured refractory high-entropy alloys (RHEAs) to helium (He) ion bombardment. Through analytical microscopy studies, we show the interplay between the alloy composition and the He bubble size and density to demonstrate how increasing the compositional complexity can limit the He bubble effects, but care must be taken in selecting the appropriate constituent elements.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Woody Plant Transformation: Current Status, Challenges, and Future Perspectives

Woody plants, comprising forest and fruit tree species, provide essential ecological and economic benefits to society. Their genetic improvement is challenging due to long generation intervals and high heterozygosity. Genetic transformation, which combines targeted DNA delivery with plant regeneration from transformed cells, offers a powerful alternative to accelerating their domestication and improvement. Agrobacterium tumefaciens, Rhizobium rhizogenes, and particle bombardment have been widely used for DNA delivery into a wide variety of explants, including leaves, stems, hypocotyls, roots, and embryos, with regeneration occurring via direct organogenesis, callus-mediated organogenesis, somatic embryogenesis, or hairy root formation. Despite successes, conventional approaches are hampered by low efficiency, genotype dependency, and a reliance on challenging tissue culture. This review provides a critical analysis of the current landscape in woody plant transformation, moving beyond a simple summary of techniques to evaluate the co-evolution of established platforms with disruptive technologies. Key advances among these include the use of developmental regulators to engineer regeneration, the rise in in planta systems to bypass tissue culture, and the imperative for DNA-free genome editing to meet regulatory and public expectations. By examining species-specific breakthroughs in key genera, including Populus, Malus, Citrus, and Pinus, this review highlights a paradigm shift from empirical optimization towards rational, predictable engineering of woody plants for a sustainable future.

Agrobacterium tumefaciens↗
DOE OSTI2020

C{sub 2}N{sub 2} Vertical Profile in Titan’s Stratosphere

In this paper, we present the first measurements of the vertical distribution of cyanogen (C{sub 2}N{sub 2}) in Titan’s lower atmosphere at different latitudes and seasons, using Cassini’s Composite Infrared Spectrometer far-infrared data. We also study the vertical distribution of three other minor species detected in our data: methylacetylene (C{sub 3}H{sub 4}), diacetylene (C{sub 4}H{sub 2}), and H{sub 2}O, in order to compare them to C{sub 2}N{sub 2}, but also to get an overview of their seasonal and meridional variations in Titan’s lower stratosphere from 85 km to 225 km. We measured an average volume mixing ratio of C{sub 2}N{sub 2} of 6.2±0.8×10{sup −11} at 125 km at the equator, but poles exhibit a strong enrichment in C{sub 2}N{sub 2} (up to a factor 100 compared to the equator), greater than what was measured for C{sub 3}H{sub 4} or C{sub 4}H{sub 2}. Measuring C{sub 2}N{sub 2} profiles provides constraints on the processes controlling its distribution, such as bombardment by Galactic Cosmic Rays which seem to have a smaller influence on C{sub 2}N{sub 2} than predicted by photochemical models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Endogenic and Exogenic Contributions to Visible-wavelength Spectra of Europa’s Trailing Hemisphere

The composition of Europa’s trailing hemisphere reflects the combined influences of endogenous geologic resurfacing and exogenous sulfur radiolysis. Using spatially resolved visible-wavelength spectra of Europa obtained with the Hubble Space Telescope, we map multiple spectral features across the trailing hemisphere and compare their geographies with the distributions of large-scale geology, magnetospheric bombardment, and surface color. Based on such comparisons, we interpret some aspects of our spectra as indicative of purely exogenous sulfur radiolysis products and other aspects as indicative of radiolysis products formed from a mixture of endogenous material and magnetospheric sulfur. The spatial distributions of two of the absorptions seen in our spectra—a widespread downturn toward the near-UV and a distinct feature at 530 nm—appear consistent with sulfur allotropes previously suggested from ground-based spectrophotometry. However, the geographies of two additional features—an absorption feature at 360 nm and the spectral slope at red wavelengths—are more consistent with endogenous material that has been altered by sulfur radiolysis. We suggest irradiated sulfate salts as potential candidates for this material, but we are unable to identify particular species with the available data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Why Interstellar Ice Dust Grains Should Be Elongated

Models of interstellar dust alignment assume that dust grains are elongated, but none of these models explain why dust grains should be elongated. On the other hand, models of interstellar dust grain growth assume that dust grains are spherical and not elongated. We show that when dusty plasma effects and the dipole moment of water molecules are together taken into account, ice grains in interstellar space should be prolate ellipsoids and not spheres. Dusty plasma analysis shows that an ice grain is charged to a negative potential that has magnitude nearly equal to that of the electron temperature. Several different mechanisms causing deviation from sphericity are identified; these mechanisms involve the interaction of the dipole moment of water molecules with electric fields associated with ice grain charging. These mechanisms include the focusing of water molecule trajectories, the migration of water molecules in a quasi-liquid layer on the grain surface toward regions where the electric field is strongest, the enhancement of this migration by the bombardment of energetic protons that gain energy upon falling into the ice grain negative potential, and mutual repulsion by electric charges having the same sign. Furthermore, the aspect ratio is established shortly after the ice grain is formed, and then is maintained as the grain grows.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Encounter of the Parker Solar Probe and a Comet-like Object Near the Sun: Model Predictions and Measurements

The Parker Solar Probe (PSP) aims to explore the nascent solar wind close to the Sun. Meanwhile, PSP is also expected to encounter small objects like comets and asteroids. Here, we survey the ephemerides to find the chance of a recent encounter and then model the interaction between released dusty plasmas and solar wind plasmas. On 2019 September 2, a comet-like object, the 322P/Solar and Heliosphere Observatory, just passed its perihelion flying to a heliocentric distance of 0.12 au and swept by PSP at a relative distance as close as 0.025 au. We present the dynamics of the dust particles released from 322P, forming a curved dust tail. Along the path of PSP in the simulated inner heliosphere, the states of plasma and magnetic field are sampled and illustrated, with the magnetic field sequences from simulation results being compared directly with the in situ measurements from PSP. Through the comparison, we suggest that 322P might be at a deficient activity level releasing limited dusty plasmas on its way to becoming a "rock comet." We also present images of solar wind streamers as recorded by the Wide-field Imager for Solar Probe Plus, showing an indication of dust bombardment for the images superposed with messy trails. We observe from the Large Angle and Spectrometric Coronagraph that 322P was transiting from a dimming region to a relatively bright streamer during its perihelion passage, and perform a simulation to confirm that 322P was flying from relatively faster to slower solar wind streams, modifying the local plasma states of the streams.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Evidence of 200 TeV Photons from HAWC J1825-134

The Earth is bombarded by ultrarelativistic particles, known as cosmic rays (CRs). CRs with energies up to a few PeV (=10 15 eV), the knee in the particle spectrum, are believed to have a Galactic origin. One or more factories of PeV CRs, or PeVatrons, must thus be active within our Galaxy. The direct detection of PeV protons from their sources is not possible since they are deflected in the Galactic magnetic fields. Hundred TeV γ-rays from decaying π 0 , produced when PeV CRs collide with the ambient gas, can provide the decisive evidence of proton acceleration up to the knee. Here we report the discovery by the High Altitude Water Cerenkov (HAWC) observatory of the γ-ray source, HAWC J1825-134, whose energy spectrum extends well beyond 200 TeV without a break or cutoff. The source is found to be coincident with a giant molecular cloud. Further, the ambient gas density is as high as 700 protons cm –3 . While the nature of this extreme accelerator remains unclear, CRs accelerated to energies of several PeV colliding with the ambient gas likely produce the observed radiation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Upper Limit for the 248 Cm( 50 Ti, x n) 298− x Og Reaction Cross Section

After the synthesis of element 113, nihonium (Nh) via the 209 Bi( 70 Zn,n) 278 Nh cold fusion reaction using the RIKEN heavy-ion Linear ACcelerator (RILAC) and the GAs-filled Recoil Ion Separator (GARIS), the search for the heaviest isotopes of oganesson was initiated with GARIS-II by means of the 248 Cm( 50 Ti,xn) 298−x Og fusion evaporation reaction. The optimal bombarding energy for the 50 Ti + 248 Cm reaction was determined from the quasielastic barrier distribution extracted from the excitation function of quasielastic backscattering. Here, this method optimizes the compound nucleus formation. The search for Og was conducted for 39 days on the basis of the experimentally derived 50 Ti beam energy of 227.9(5) MeV at the middle of 248 Cm target. A precise analysis of the dataset based on multiple event search strategies revealed no decay chains with a total dose on 248 Cm target of 4.93 × 10 18 50 Ti projectiles, reaching a sensitivity of 0.27 pb and a 1σ upper cross section limit of 0.50 pb.

Gall, Benoît Jean-Paul [University of Strasbourg (↗
DOE OSTI2022

Ultra-rapid, physics-based development pathway for reactor-relevant RF antenna materials

This paper presents a rapid, atomistically-informed, experimental development pathway for fusion reactor-relevant radio frequency (RF) antenna materials in the Cu-Cr-(Nb,Al,Zr) composition system, with the goal of improving upon GRCop-84. RF antennas in a tokamak fusion reactor will face a unique set of challenges as both structural and functional materials. The desired material must simultaneously achieve and maintain high electrical conductivity, high strength, high thermal conductivity, resist high temperatures, possess low nuclear activation, and incur low damage due to neutron bombardment. The GRCop-84 alloy serves as a starting point for iterative improvement, with the desire to reduce or eliminate Nb from the material to minimize nuclear activation. The rapid development pathway makes use of a multi-target combinatorial thick film sputtering process to produce full ternary phase diagrams on a Si wafer substrate. Transient grating spectroscopy (TGS), a laser-ultrasonic method, will determine spatially-varying thermo-elastic properties, while four terminal electrical conductivity measurements will map out the best per- forming regions of the sample for in-depth study at larger length scales. High energy proton and self-ion irradiation emulates the effects of neutron damage on the thermal/electric properties. With rapid turnaround time (∼days) in terms of mapping radiation damage-induced material property changes in the full ternary system, these techniques allow rapid iteration towards an optimal material, testing hundreds of nearby compositions in the time it took to test one. Focused testing of larger, single composition samples (produced in an arc furnace or by laser sintering) provides data on structural and high power RF properties, and validates our thick-film based workflow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Retractable Sensor for Reactor Experiments

This presentation is to orient a mechanical or nuclear engineering senior design team so that they can help solve an instrumentation problem found in high power test reactors. Test reactors such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory are used to irradiate nuclear fuels and materials to evaluate performance after high levels of exposure to a reactor in-pile environment. The purpose of the experiments is to determine property changes as the materials or fuels are bombarded with fast neutrons (and thermal (slow) neutrons as well). Typically, the irradiation must take place at a very specific temperature. Sometimes other parameters are monitored as well as properties such as creep, or gas composition, etc. However, the fast neutrons cause changes in not only the materials, but also in the transducers that are placed in the neutron flux, e.g., thermocouples or optical fibers. This task will be limited to considering temperature measurements. Thermocouples experience decalibration from not only the neutron flux, but also from the very high temperatures that are sometimes measured. Optical fibers darken in a neutron or gamma flux. However, it takes quite a few hours, or days for these changes to manifest. High power test reactors typically run at a constant power and so the temperature in an experiment is fairly stable over time. Because the changes are typically very slow, even a single temperature measurement per day, would provide 95% of a perfect data set. The basic concept of this effort is to push a very small diameter thermocouple or optical fiber into the location to be measured, leave it for 30 seconds or so for it to come to equilibrium, and transmit the signal, and then pull it up and away from the high neutron flux and high temperature region. The distance the thermocouple or fiber would need to move is on the order of 50 – 100 cm. By doing this, the thermocouple junction or optical fiber would spend only a few hours in the high flux/high temperature environment over the life of the irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

The Response of Polarized Protons in Solid Hydrogen-Deuteride(HD) to Electron Beams

Solid frozen-spin polarized targets of hydrogen-deuteride(HD) have been proven advantageous in photon beam experiments, where they exhibit immeasurably long spin-relaxation times(T1). The present research investigates their potential applicability to experiments with minimum-ionizing charged-particle beams. Studies have been conducted with sub-nanoAmp CW currents of 10 MeV electron beams at the newly commissioned Upgraded Injector Test Facility (UITF) at Jefferson Lab (JLab). Since the energy deposition is almost independent of electron beam energy, these UITF experiments provide insight on the expected performance at the GeV energies required in typical JLab experiments. A horizontal in-beam dilution refrigerator equipped with superconducting solenoids has been used to maintain solid HD samples at about 0.1K and 1 Tesla. NMR coils sur rounding the HD target have been used to monitor hydrogen polarization. Thermal equilibrium polarizations of targets not in the frozen-spin state (with intentionally short T1) have been used to deduce the in situ temperature of solid HD while under electron bombardment. The behavior of a 40% H-polarized frozen-spin target has been tracked while exposed to beams under various conditions. Polarization loss has been observed to be approximately proportional to dose, with the target polarization dropping to 1/e of its initial value after about 6 µC cm2 , about 4 ? 1013 beam particles/cm2 . A model for depolarization by beam-associated paramagnetic impurities largely accounts for the data, and suggests that improvements in heat removal could lead to significant increases in the in-beam T1

Wei, Kevin↗
DOE OSTI2021

PET imaging of zinc transport

A method for producing a solution including a positron emitting zinc cation of 63Zn, and the method comprises bombarding a solution target including 63 Cu with high energy protons to produce a solution including a positron emitting zinc cation. A method for detecting or ruling out Alzheimer's disease in a patient comprises administering to a patient a detectable amount of a compound including a positron emitting zinc cation, wherein the zinc cation is targeted to β-amyloid in the patient, and acquiring an image to detect the presence or absence of β-amyloid in the patient. A method for detecting or ruling out cancer in a patient comprises administering to a patient a detectable amount of a compound including a positron emitting zinc cation, wherein the zinc cation is targeted to tissue in the patient; and acquiring an image using a medical imaging technique to detect zinc distribution in tissue in the patient.

DeGrado, Timothy R.↗
DOE OSTI2022

System, apparatus, and method for determining elemental composition using 4D STEM

The present disclosure relates to transmission electron microscopy for evaluation of biological matter. According to an embodiment, the present disclosure further relates to an apparatus for determining the structure and/or elemental composition of a sample using 4D STEM, comprising a direct bombardment detector operating with global shutter readout, processing circuitry configured to acquire images of bright-field disks using either a contiguous array or non-contiguous array of detector pixel elements, correct distortions in the images, align each image of the images based on a centroid of the bright-field disk, calculate a radial profile of the images, normalize the radial profiles by a scaling factor, calculate the rotationally-averaged edge profile of the bright-field disk, and determine elemental composition within the specimen based on the characteristics of the edge profile of the bright-field disk corresponding to each specimen location.

Bammes, Benjamin↗
DOE OSTI2022

Measurements of Electron Beam-Induced Spin-Relaxation in Frozen-Spin Hydrogen-Deuteride (HD)

Targets of solid hydrogen-deuteride (HD) can be prepared in a frozen-spin state with spin relaxation times (T1) in excess of a year. The present work has studied their potential use in experiments with electron beams. Polarization relaxation rates have been measured during exposure to sub-nanoAmp currents of 9.7 MeV electron beams from the recently commissioned Upgraded Injector Test Facility (UITF) at Jefferson Lab (JLab). These UITF measurements can be used to anticipate the expected performance at the GeV energies typical of JLab experiments, since the energy deposition in a target is almost independent of beam energy. An in-beam dilution refrigerator equipped with superconducting solenoids has been used to maintain solid HD samples at ?0.1 K and ?1 tesla, and internal NMR coils have been used to monitor hydrogen polarization. Spin-relaxation in two frozen-spin targets, with initial H-polarizations of 40% and 34%, have been tracked while exposed to beams under varying conditions of current, dose, beam duty factor and temperature. At a fixed accumulated dose, the spin-relaxation rates drop with current, suggesting depolarization by the charge cloud of the beam. Imposing a duty factor on the otherwise continuous UITF beam, with forced millisecond scale gaps, has shown no obvious correlation to polarization loss rates. After an accumulated dose of ?2 ?C/cm2, beam-off spin-relaxation rates drop from their immeasurably long pre-irradiation values to the order of weeks (with beam-on T1 values typically an order of magnitude shorter), reflecting a buildup of paramagnetic charge centers within the HD lattice. The accumulated polarization loss was approximately proportional to dose in both targets, dropping to 1/e of their initial values after ?6 ?C/cm2. Thermal equilibrium polarizations of targets not in the frozen-spin state (with intentionally short T1) have been used to deduce the in situ temperature of solid HD while under electron bombardment. A model for depolarization by beam-associated paramagnetic impurities largely accounts for the data, and suggests that improvements in heat removal could lead to significant increases in the in-beam T1.

O'Connell, Thomas↗
DOE OSTI2024

On the Life Expectance of High-power CW Magnetrons for SRF Accelerators

Modern CW or pulse Superconducting RF (SRF) accelerators require efficient RF sources controllable in phase and power with a reduced cost. Therefore, utilization of the high-power CW magnetrons as RF sources in SRF accelerator projects was proposed in a number of works, e.g., [1, 2]. But typically, the CW magnetrons are designed as RF sources for industrial heating, and the lifetime of the tubes is not the first priority as it is required for high-energy accelerators. The high-power industrial CW magnetrons use the cathodes made of pure tungsten. The emission properties of the tungsten cathodes are not deteriorated much by electron and ion bombardments, but the latter causes sputtering of the cathode in the magnetron crossed fields. The sputtered cathode material covers the magnetron interior. This leads to sparks and discharges that limit the life of the magnetrons. We considered an analysis of magnetron failure modes vs. output power [3]. We developed a model of ionization of the residual gas in the magnetrons interaction space and simulated the spattering of the cathode in 100 kW CW magnetrons to estimate the life expectancy. Basing on results we proposed ways to increase the CW magnetrons longevity for SRF accelerators.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Overview of H- radio frequency ion sources for particle accelerators

Particle accelerators are among the most important scientific tools of the modern era. Large accelerator complexes have supported scientific user facilities which have had an enormous societal impact spanning many decades and enabling the work of thousands of scientific users worldwide contributing to many Nobel prizes in physics, biology and chemistry [1]. Many of the large hadron facilities employ accelerator complexes which include cyclotrons, synchrotrons, storage rings, linear or tandem accelerators and deliver ion beams of very high-intensity and/or very high-energy to their user facilities. These accelerator complexes require the injection of high-intensity beams of ions which are produced within an ion source and formed within a plasma or by bombardment of a surface [2]. Increasingly, RF systems are being utilized, to generate these ion-rich plasmas due to their high reliability and minimal use of consumable components. This report will first discuss the basic mechanisms of ion formation and plasma generation as well as some specifics of RF/microwave generators, matching circuits and plasma coupling structures typically employed. A detailed discussion will then be given of the RF-driven negative ion source systems employed by US Spallation Neutron Source as well as those used in similar facilities located around the globe. REFERENCES [1]Vladimir Shiltsev, “Particle beams behind physics discoveries”, Physics Today 73, Issue 4, 32 (2020) [2]Robert Welton et al, “Negative hydrogen ion sources for particle accelerators: Sustainability issues and recent improvements in long-term operations”, Journal of Physics Conf Series, 2244 012045

Welton, Robert F.↗