Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Plasmas in Saturn's magnetosphere

The solar wind plasma analyzer on board Pioneer 2 provides first observations of low-energy positive ions in the magnetosphere of Saturn. Measurable intensities of ions within the energy-per-unit charge (E/Q) range 100 eV to 8 keV are present over the planetocentric radial distance range about 4 to 16 R sub S in the dayside magnetosphere. The plasmas are found to be rigidly corotating with the planet out to distances of at least 10 R sub S. At radial distances beyond 10 R sub S, the bulk flows appear to be in the corotation direction but with lesser speeds than those expected from rigid corotation. At radial distances beyond the orbit of Rhea at 8.8 R sub S, the dominant ions are most likely protons and the corresponding typical densities and temperatures are 0.5/cu cm and 1,000,000 K, respectively, with substantial fluctuations. It is concluded that the most likely source of these plasmas in the photodissociation of water frost on the surface of the ring material with subsequent ionization of the products and radially outward diffusion. The presence of this plasma torus is expected to have a large influence on the dynamics of Saturn's magnetosphere since the pressure ratio beta of these plasmas approaches unity at radial distances as close to the planet as 6.5 R sub S. On the basis of these observational evidences it is anticipated that quasi-periodic outward flows of plasma, accompanied with a reconfiguration of the magnetosphere beyond about 6.5 R sub S, will occur in the local night sector in order to relieve the plasma pressure from accretion of plasma from the rings.

Frank, L. A.↗

Plasmas in Saturn's magnetosphere

Passage of Pioneer 11 through Saturn's magnetosphere revealed a third magnetosphere with a high plasma abundance. The dominant ion species appears to be oxygen. The plasma is located in a large torus about Saturn, including the orbits of Dione and Tethys. The plasma are rigidly corotating with the planet to distances of at least 10 Saturn radii. Bulk flows appear to move in the corotation direction, but at speeds lower than those expected from rigid corotation. The ions appear to be the ionization products of water frost on the surface of the ring material.

Frank, L. A.↗

Relationship between energetic particles and plasmas in the distant plasma sheet

Measurements of ions from three different instruments on the IMP-7 and 8 spacecraft are combined to yield the differential energy spectra of ions over the entire energy range of 100 eV to 4 MeV in the earth's distant (30 to 40 earth radii) plasma sheet. These spectra, obtained during times of relatively small bulk flow velocities, span the intensity range from 10 to the -5th to 10 to the 5th per sq cm-sec-sr-keV, varying smoothly over the entire energy range both when the plasma is cold (about 1 keV) and hot (about 9 keV). Overall, the shape of the spectrum resembles a Maxwellian but with a high energy (not less than 50 keV) tail described well by a power law. The high energy tail is displaced in a parallel fashion to higher or lower intensities when the plasma is hot or cold, respectively. It is found that the energetic particle populations in the plasma sheet appear to be directly related to the mean thermal energies of the corresponding plasmas.

Sarris, E. T.↗

Damping seals for turbomachinery

A rotor seal is proposed that restricts leakage like a labyrinth seal, but extends the stabilizing speed range beyond twice the first critical speed. The dynamic parameters were derived from bulk flow equations without requiring a dominant axial flow. The flow is considered incompressible and turbulent. Damping seals are shown to be feasible for extending the speed range of high performance turbomachinery beyond the limit imposed by conventional seals.

Vonpragenau, G. L.↗

The Retarding Ion Mass Spectrometer on Dynamics Explorer-A

The thermal component of the magnetospheric plasma plays a key role in magnetosphere-ionosphere coupling processes, acting as a strong influence on ionospheric structure at low altitudes and as a source and modifier of the hotter plasma population at high altitudes. The Retarding Ion Mass Spectrometer (RIMS) instrument on Dynamics Explorer-A is designed to measure this important thermal plasma component. Using a combination of retarding potential analysis and magnetic ion mass spectrometer techniques, the RIMS instrument will measure the bulk plasma parameters of ion density (0.1 to 1,000,000 ions/cu cm), temperature (0-45 eV), and bulk flow (greater than 0.5 km/sec) in the inner plasmasphere and ionosphere, and the specific ion pitch angle and energy spectral characteristics in the outer plasmasphere and plasma trough for a mass range of 1-32 amu. The energy and mass spectral step sequences, as well as the multiplexing of the resultant data, can be tailored to accomplish a variety of thermal ion measurements throughout the inner magnetosphere.

Chappell, C. R.↗

Solar wind motion within 30 R solar masses - Spacecraft radio scintillation observations

New remote-sensing observations are reported of the solar wind motion within about 30 earth radii. Use is made of the interplanetary scintillation (IPS) spaced receiver technique with the radio source being a spacecraft signal (rather than a natural radio source as in previous spaced receiver studies). The spacecraft used are Helios A and B and the Viking orbiters. The purposes of the study are (1) to augment the scarce estimates of solar wind bulk flow speed near the sun and in the ecliptic with measurements made using spacecraft signals, and (2) to estimate random velocity components and identify the region where the random velocity is a significant fraction of the mean velocity. In addition, the radial evolution of speed and random velocity is compared with that of the plasma density fluctuation spectrum. Also reported are the first accurately normalized IPS scintillation index measurements using a monochromatic point source.

Armstrong, J. W.↗

On photochemical heating of cometary comae - The cases of H2O and CO-rich comets

It is found that the effect of energy addition due to photochemical processes in the cometary coma on the heating and accelerating of the expanding neutral gas is limited by the kinematic property of the energy transfer from the energetic fragments to the bulk flow. The effective scale length of the photochemical zone for an H2O comet is estimated to be only 10% of the dimension of the collision region due to the large mass ratio of H atom and H2O molecule. When this physical property is taken into consideration, the H2O gas is found to be expanding at a highly supersonic speed. In addition, it is shown that the addition of a mixture of CO and/or CO2 molecules in a medium-bright comet with total production rate of 10 to the 29th molecules/s would not change this conclusion since the photodissiation length scales of these molecules are a factor of 10-30 larger than that of the H2O molecules. Thus, most of the CO and CO2 molecules will be dissociated outside of the collision zone without depositing the excess kinetic energy to the neutral atmosphere. However, if the gas production rate is controlled by CO or CO2, the dimension of the collision zone of a CO comet at 1 AU will be increased by a factor of seven. The photochemical heating due to CO dissociation would thus be more effective, causing the atmospheric flow to be weakly supersonic. It is concluded that the neutral gas outflows from H2O comets and CO comets could be substantially different.

Ip, W.-H.↗

Fluid mechanics in crystal growth - The 1982 Freeman scholar lecture

An attempt is made to unify the current state of knowledge in crystal growth techniques and fluid mechanics. After identifying important fluid dynamic problems for such representative crystal growth processes as closed tube vapor transport, open reactor vapor deposition, and the Czochralski and floating zone melt growth techniques, research results obtained to date are presented. It is noted that the major effort to date has been directed to the description of the nature and extent of bulk transport under realistic conditions, where bulk flow determines the heat and solute transport which strongly influence the temperature and concentration fields in the vicinity of the growth interface. Proper treatment of near field, or interface, problems cannot be given until the far field, or global flow, involved in a given crystal growth technique has been adequately described.

Ostrach, S.↗

The NASA Space Environment Simulation Laboratory

The NASA Space Environment Simulation Laboratory (SESL) features a chamber for studying specific space plasma physics phenomena. The test chamber, an upright domed cylinder having a 17 m diam and a 27 m height for an inner working volume, is lined with magnetic field generator coils. The chamber pressure is nominally 1/1,000,000th torr. Equipment positioning is carried out by remote control from outside guided by a closed circuit television system. Plasma is generated in the chamber by means of a 30 cm Kaufman thruster which produces ion densities of 100,000-1,000,000/cu cm. The ion bulk flow energy is in the range of 20-50 eV and a charge exchange with the ambient gas produces a cold isotropic ion component. Langmuir probes provide measurements of the electron temperature and density, and the composition and pressure are monitored by mass spectrometry and ion gages. Experiments have been performed on electron beam-plasma interactions, VLF antenna impedance measurements, and high voltage plasma sheaths which may be encountered by spacecraft.

Jost, R. J.↗

A unified mathematical theory of electrophoretic processes

A mathematical theory is presented which shows that each of the four classical electrophoretic modes (zone electrophoresis, moving boundary electrophoresis, isotachophoresis, and isoelectric focusing) is based on the same general principles and can collectively be described in terms of a single set of equations. This model can predict the evolution of the four electrophoretic modes as a function of time. The model system is one-dimensional, neglecting the effects of electroosmosis, temperature gradients, and any bulk flows of liquid. The model is based on equations which express the components' dissociation equilibria, the mass transport due to electromigration and diffusion, electroneutrality, and the conservation of mass and charge. The model consists of a system of coupled partial differential and nonlinear algebraic equations which can be solved numerically by use of a computer. The versatility of this model was verified using an example of a three-component system containing cacodylate, tris hydroxylmethylaminomethane, and histidine. Results show that this model not only correctly predicts the characteristic features of each electrophoretic mode, but also gives details of the concentration, pH, and conductivity profiles not easily amenable to direct experimental measurement.

Bier, M.↗

The ISPM solar-wind plasma experiment

The ISPM solar wind plasma experiment accurately characterizes the bulk flow and internal state conditions of the interplanetary plasma in three dimensions at all heliographic distances and heliographic latitudes reached by the spacecraft. Solar wind electrons, protons, alpha particles, and heavier ions are measured. Oxygen, silicon, and iron ions at various charge levels are resolved. Electrons and ions are measured simultaneously with independent curved-plate electrostatic analysers equipped with multiple continuous channel electron multipliers arranged so that particle velocity distributions are suitably resolved without gaps in spacecraft polar-angle space. Electrons with energies between 1 and 900 eV are detected at 7 polar angles and various combinations of azimuth angle to cover the unit sphere comprehensively. Ions are detected between 257 eV/Q and 35 keV/Q. Data matrices are obtained every 4 min when the spacecraft is actively transmitting and every 8 min during storage periods. These matrices contain sufficient energy and angle resolution to permit detailed calculations of ion velocity distributions.

Bame, S. J.↗

Conductive damping of coronal motions

Time-dependent motions in the solar corona are subject to modification through conductive transport of thermal energy away from compression regions and into rarefaction regions. The evolution depends on how the energy is introduced - by an essentially thermal perturbation or by a density perturbation. The net effect of thermal conduction is to convert local kinetic energy in the transient into widely distributed thermal energy, which then may in turn be partially converted into kinetic energy of the bulk flow. Local motion in the transient is thereby damped. These effects are modeled here using a numerical solution of the time-dependent solar wind equations for single-fluid thermally conductive flow. The simulations of transient phenomena are made for ordinary collisional thermal conduction and compared with similar simulations done using polytropic flow. Between one and five solar radii, the gross character in the two cases is very similar. However, there are effects with thermal conduction that cannot be modeled with polytropic flow, illustrated here by temperature and velocity forerunners and a delayed and large-amplitude trailing velocity low. If thermal conduction is artificially inhibited by simple reduction of the thermal conduction coefficient, relative velocity amplitudes remain larger in approximate proportion to the amount the coefficient is reduced.

Suess, S. T.↗

The solar wind ionization state as a coronal temperature diagnostic

The 'frozen' solar wind ionization state within a few solar radii of the photosphere suggests that ion measurements at 1 AU may yield information on the electron temperature conditions at the base of the coronal expansion. The freezing-in process is examined in light of traditional assumptions as to coronal expansion, where electron temperature decreases monotonically with height, the bulk flow of all charge states of a given ion species are equal to the proton speed, and the ion outflow is spherically symmetric. The consequences of the relaxation of these assumptions include the underestimation of the magnitude of a temperature maximum occurring near the freezing-in radius. Because it is associated with high speed, low density flow, an areal divergence that is faster than that in a spherical outflow lowers the ionization state freezing-in level relative to that which is typical in spherically symmetric expansion.

Owocki, S. P.↗

Currents in the earth's magnetotail

Currents in the earth's magnetotail are detected with the plasma instrumentation on board the ISEE-1 spacecraft. Field-aligned currents directed into and out of the ionosphere are found in the boundary layer of the plasma sheet. Typical current densities are in the range of 5 x 10-9 to 5 x 10-8 A/m2. These currents are associated with the Region 1 current system that is observed previously at low altitudes. An intense current sheet is shown to exist at a discontinuity in convection electric fields during a period of great magnetic activity. Electron acceleration, similar to that for electron inverted-V precipitation regions at low altitudes, occurs in this current sheet. Examination of the plasma velocity distributions at a neutral-sheet crossing reveals that the neutral sheet current is carried by electrons and protons. The relative directions for the bulk flows of the proton and electron plasmas indicate that the first adiabatic invariant is not conserved for the protons, and quite possibly for the electrons also. These letter findings are in substantial agreement with a neutral sheet model for acceleration of charged particles in the presence of a weak electric field.

Frank, L. A.↗

Driven magnetic reconnection in three dimensions - Energy conversion and field-aligned current generation

The energy conversion processes occurring in three-dimensional driven reconnection is analyzed. In particular, the energy conversion processes during localized reconnection in a taillike magnetic configuration are studied. It is found that three-dimensional driven reconnection is a powerful energy converter which transforms magnetic energy into plasma bulk flow and thermal energy. Three-dimensional driven reconnection is an even more powerful energy converter than two-dimensional reconnection, because in the three-dimensional case, plasmas were drawn into the reconnection region from the sides as well as from the top and bottom. Field-aligned currents are generated by three-dimensional driven reconnection. The physical mechanism responsible for these currents which flow from the tail toward the ionosphere on the dawnside of the reconnection region and from the ionosphere toward the tail on the duskside is identified. The field-aligned currents form as the neutral sheet current is diverted through the slow shocks which form on the outer edge of the reconnected field lines (outer edge of the plasma sheet).

Sato, T.↗

Evolution of the earth's distant magnetotail - ISEE 3 electron plasma results

ISEE 3 data form the basis for a study of the evolution of the electron plasma in the magnetotail lobe and plasma sheet regions as a function of radial distance from the earth. The data were plasma electron and magnetometer measurements taken when the ISEE 3 was tailward of the earth during three different orbits. About 91,000 electron spectra were obtained in terms of the magnetosheath, lobe, plasma sheet and radial downstream distances. The lobe density peaked at 60 earth radii, while the sheet density tapered very slowly downstream. At large downstream distances (about 180 radii), the plasma bulk flow velocity increased significantly, surpassing the solar wind velocity. The bimodal electron flow angle near the earth became a single tailward flow at 180 radii.

Zwickl, R. D.↗

Theory and measurements of labyrinth seal coefficients for rotor stability of turbocompressors

The prediction of rotordynamic coefficients for gas seals is achieved with the aid of a two-volume bulk flow model based on turbulent rotationally symmetric 3D flow calculations including swirl flow. Comparison of cross-coupling and damping coefficients with measurements confirm this approach. In particular the theoretically predicted phenomenon that labyrinth damping is retained without inlet swirl is confirmed. This is important for the design of high pressure compressors, where labyrinth damping is a major contribution improving rotor stability. Discrepancies are found when comparing theory with measured direct stiffness and the cross-coupling damping coefficients. First measurements of labyrinth seals on a recently installed test rig operated with water are presented. Since forces are larger than on test stands operated with air and since individual chamber forces are obtained phenomena like inlet effects may be studied.

Syssmann, H. R.↗

Force and moment rotordynamic coefficients for pump-impeller shroud surfaces

Governing equations of motion are derived for a bulk-flow model of the leakage path between an impeller shroud and a pump housing. The governing equations consist of a path-momentum, a circumferential - momentum, and a continuity equation. The fluid annulus between the impeller shroud and pump housing is assumed to be circumferentially symmetric when the impeller is centered; i.e., the clearance can vary along the pump axis but does not vary in the circumferential direction. A perturbation expansion of the governing equations in the eccentricity ratio yields a set of zeroth and first-order governing equations. The zeroth-order equations define the leaking rate and the circumferential and path velocity distributions and pressure distributions for a centered impeller position. The first-order equations define the perturbations in the velocity and pressure distributions due to either a radial-displacement perturbation or a tilt perturbation of the impeller. Integration of the perturbed pressure and shear-stress distribution acting on the rotor yields the reaction forces and moments acting on the impeller face.

Childs, Dara W.↗