SEARCH · Search NASA

Results for “catalyzers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Slip conditions with wall catalysis and radiation for multicomponent, nonequilibrium gas flow

The slip conditions for a multicomponent mixture with diffusion, wall-catalyzed atom recombination and thermal radiation are derived, and simplified expressions for engineering applications are presented. The gas mixture may be in chemical nonequilibrium with finite-rate catalytic recombination occurring on the wall. These boundary conditions, which are used for rarefied flow regime flow field calculations, are shown to be necessary for accurate predictions of skin friction and heat transfer coefficients in the rarefied portion of the space shuttle trajectory.

Hendricks, W. L.↗

NASA NTRS1975

A similarity solution of the Navier-Stokes equations with wall catalysis and slip for hypersonic, low Reynolds number flow over spheres

The slip conditions for a multicomponent mixture with diffusion, wall-catalyzed atom recombination and thermal radiation are derived. The more realistic multicomponent species slip conditions are shown to be necessary for accurate merged shock layer solutions on a sphere. These slip conditions are used in a first-order similarity solution of the Navier-Stokes equations with nonequilibrium chemistry for the merged shock layer. Results of this quick numerical solution are compared with a time dependent solution around the sphere and with measured arc jet results at low Reynolds numbers. The similarity solution, unlike the time dependent solution, shows smooth radial profiles of the pressure and smooth variations of velocity slip, skin friction, temperature slip and heat transfer around the body. The present first-order similarity solution is valid up to 25 deg from the stagnation point and takes less than 1% of the computer time to run a time dependent scheme. The smaller stand-off distance obtained from the similarity solution is supported by experimental data. The measured heat flux is closer to the similarity solution than the time dependent method at the stagnation point and shows the proper variation with circumferential angle up to at least 40 deg.

Hendricks, W. L.↗

NASA NTRS1975

Edible carbohydrates from formaldehyde in a spacecraft

The autocatalytic nature of the base catalyzed condensation of formaldehyde to formose sugars is eliminated by using as a cocatalyst, an aldose, or ketose having an alpha-hydrogen. This is more strongly complexed by base than is formaldehyde and the cocatalyst and sugar products accumulate as catalyst complexes instead of formaldehyde. Because of the presence of alpha-hydrogen atoms in cocatalysts and formose sugars, their removal by cross Cannizzaro reaction of complexed sugars does not occur, so the formose reaction behaves autocatalytically due to this accumulation. It is believed that a given catalytic formose complex is not a discrete complexed sugar, but rather, a scrambled dynamic mixture of sugars having weakened structures. The sugar complexes derive from a common salt-like formaldehyde complex, which, because of the absence of alpha-hydrogen, has a greater tendency to undergo Cannizzaro reaction, rather than formose condensation. Because of this, the Cannizzaro reaction can proceed without measurable formose condensation. The reverse is not possible.

Weiss, A. H.↗

NASA NTRS1976

Friction characteristics of 20 x 4.4, type 7, aircraft tires constructed with different tread rubber compounds

A test program was conducted at the Langley aircraft landing loads and traction facility to evaluate the friction characteristics of 20 x 4.4, type, aircraft tires constructed with experimental cut-resistant, tread rubber compounds. These compounds consisted of different blends of natural rubber (NR) and an alfin catalyzed styrene-butadiene copolymer rubber (SBR). One tire having a blend of 30 SBR and 70 NR and another having a blend of 60 SBR and 40 NR in the tread were tested together with a standard production tire with no SBR content in the tread rubber. The results of this investigation indicated that the test tires constructed with the special cut-resistant tread rubber compositions did not suffer any significant degradation in tire friction capability when compared with the standard tire. In general, tire friction capability decreased with increasing speed and surface wetness condition. As yaw angle increased, tire braking capability decreased while tire cornering capability increased. Tread-wear data based on number of brake cycles, however, suggested that the tires with alfin SBR blends experienced significantly greater wear than the standard production tire.

Dreher, R. C.↗

NASA NTRS1976

Electrochemical performance investigations on the hydrogen depolarized CO2 concentrator

An extensive investigation of anode and cathode polarization in complete cells and half cells was conducted to determine the factors affecting HDC electrode polarization and the nature of this polarization. Matrix-electrolyte-electrode interactions and cell electrolyte composition were also investigated. The electrodes were found to have normal performance capabilities. The HDC anode polarization characteristics were correlated with a theoretical kinetic analysis; and, except for some quantitative details, a rather complete understanding of the causes for HDC electrode polarization was formulated. One of the important finding resulting from the kinetic analysis was that platinum appears to catalyze the decomposition of carbonic acid to carbon dioxide and water. It was concluded that the abnormal voltage performance of the One Man ARS HDC cells was caused by insufficient cell electrolyte volume under normal operating conditions due to deficiencies in the reservoir to cell interfacing.

Aylward, J. R.↗

NASA NTRS1976

Closed system Fischer-Tropsch synthesis over meteoritic iron, iron ore and nickel-iron alloy

Experiments were performed in which meteoritic iron, iron ore and nickel-iron alloy were used to catalyze (in Fischer-Tropsch synthesis) the reaction of deuterium and carbon monoxide in a closed vessel. Normal alkanes and alkenes and their monomethyl substituted isomers and aromatic hydrocarbons were synthesized. Iron oxide and oxidized-reduced Canyon Diablo used as Fischer-Tropsch catalysts were found to produce aromatic hydrocarbons in distributions having many of the features of those observed in carbonaceous chondrites, but only at temperatures and reaction times well above 300 C and 6-8 h.

Nooner, D. W.↗

NASA NTRS1975

Cyanogen induced phosphorylation of D-fructose

It has been demonstrated that a phosphorylated sugar, identified as alpha-D-fructopyranose, can be formed as the result of cyanogen-induced phosphorylation of D-fructose at pH 8.8. The product was isolated from barium and cyclohexylammonium salts and identified on the basis of its chromatographic and electrophoretic properties, its lability to hydrolysis by alkaline phosphatase, the rate of its acid-catalyzed hydrolysis, and the results of periodate oxidation and optical rotatory measurements. These results support the suggestion that the cyanogen-induced phosphorylation of free sugars could be a possible process for formation of sugar phosphates under prebiotic conditions (Halman et al., 1969).

Degani, CH.↗

NASA NTRS1975

Aminoacyl transfer from an adenylate anhydride to polyribonucleotides

Imidazole catalysis of phenylalanyl transfer from phenylalanine adenylate to hydroxyl groups of homopolyribonucleotides is studied as a possible chemical model of biochemical aminoacylation of transfer RNA (tRNA). The effect of pH on imidazole-catalyzed transfer of phenylalanyl residues to poly(U) and poly(A) double helix strands, the number of peptide linkages and their lability to base and neutral hydroxylamine, and the nature of adenylate condensation products are investigated. The chemical model entertained exhibits a constraint by not acylating the hydroxyl groups of polyribonucleotides in a double helix. The constraint is consistent with selective biochemical aminoacylation at the tRNA terminus. Interest in imidazole as a model of histidine residue in protoenzymes participating in prebiotic aminoacyl transfer to polyribonucleotides, and in rendering the tRNA a more efficient adaptor, is indicated.

Weber, A. L.↗

NASA NTRS1975

Storage Stability and Improvement of Intermediate Moisture Foods, Phase 3

Methods were determined for the improvement of shelf-life stability of intermediate moisture foods (IMF). Microbial challenge studies showed that protection against molds and Staphylococcus aureus could be achieved by a combination of antimicrobial agents, humectants and food acids. Potassium sorbate and propylene glycol gave the best results. It was also confirmed that the maximum in heat resistance shown by vegetative pathogens at intermediate water activities also occurred in a solid food. Glycols and sorbitol both achieve browning inhibition because of their action as a medium for reaction and effect on viscosity of the adsorbed phase. Chemical availability results showed rapid lysine loss before visual discoloration occurred. This is being confirmed with a biological test using Tetrahymena pyriformis W. Accelerated temperature tests show that effectiveness of food antioxidants against rancidity development can be predicted; however, the protection factor changes with temperature. BHA was found to be the best antioxidant for iron catalyzed oxidation.

Labuza, T. P.↗

NASA NTRS1979

Improved imide polymerization catalyst

Catalyzation of imide polymers with metallic salts of 2-ethyl hexanoic acid allows reaction in production of flame resistant foams to proceed in one step without formation of undesirable heat-sensitive byproducts.

Estrella, C. A.↗

NASA NTRS1978

Calculated rate constants for the reaction ClO + O yields Cl + O2 between 220 and 1000 deg K

Classical trajectory calculations are presented for the reaction ClO + O yields Cl + O2, a reaction which is an important step in the chlorine-catalyzed destruction of ozone which is thought to occur in the 220 and 1000 K. The calculated rate constant is 4.36 x 10 to the minus 11th power exp (-191/T)cu cm molecule (-1)s(-1) and its value at 300 K is 2.3 plus or minus 10 to the 11th power cu cm molecule (-1)s(-1), about a factor of 2 lower than recent experimental data. The empirical potential energy surface used in the calculations was constructed to fit experimental data for ClO, O2 and ClOO molecules. Other important features of this potential surface, such as the barrier to reaction, were varied systematically and calculations were performed for a range of conditions to determine the best theoretical rate constants. Results demonstrate the utility of classical trajectory methods for determining activation energies and other kinetic data for important atmospheric reactions.

Jaffee, R. L.↗

NASA NTRS1979

Lean stability augmentation study

An analytical conceptual design study and an experimental test program were conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. The use of hot gas pilots, catalyzed flameholder elements, and heat recirculation to augment lean stability limits was considered in the conceptual design study. Tests of flameholders embodying selected concepts were conducted at a pressure of 10 arm and over a range of entrance temperatures simulating conditions to be encountered during stratospheric cruise. The tests were performed using an axisymmetric flametube test rig having a nominal diameter of 10.2 cm. A total of sixteen test configurations were examined in which lean blowout limits, pollutant emission characteristics, and combustor performance were evaluated. The use of a piloted perforated plate flameholder employing a pilot fuel flow rate equivalent to 4 percent of the total fuel flow at a simulated cruise condition resulted in a lean blowout equivalence ratio of less than 0.25 with a design point (T sub zero = 600k, Phi = 0.6) NOx emission index of less than 1.0 g/kg.

Mcvey, J. B.↗

NASA NTRS1978

Carbonaceous chondritic material in the solar system

Carbonaceous chondritic matrix material (CCMM) appears to be an important planet-forming unit in the mid-solar system, from the orbits of Mars to that of Uranus. The type specimen for CCMM is the low-temperature (400-500 K) assemblage of clay minerals, organic polymer, magnetite, and Ni-rich iron sulfides which constitutes the black, fine-grained matrix of primitive carbonaceous chondrites. Solar-system objects which appear to be partly or wholly made of CCMM are the satellites of Mars, most asteroids, interplanetary dust, and, perhaps, comets, satellites of the outer planets and the rings of Uranus. CCMM constituents probably formed by low-temperature reactions of higher-temperature condensates with the ambient solar composition gas, or in the case of the organic polymer, by reactions of gaseous species catalyzed by solids.

Wilkening, L. L.↗

NASA NTRS1978

Properties of the stratospheric aerosol layer studied with a one-dimensional computer model

Aerosol particle effects are often neglected in theoretical studies of stratospheric phenomena. In reality, the particulate matter normally found above the tropopause may influence the terrestrial radiation balance, catalyze heterogeneous chemical interactions, and serve as a tracer of atmospheric motions. The paper proposes a one-dimensional model of the stratospheric aerosol layer, and it is used to compare aerosol theory with observational data. The model considers gaseous sulfur photochemistry and the physical aerosol processes of nucleation, coagulation, sedimentation, and diffusion. Calculations of the effects on the aerosol layer of stratospheric injections of aluminum oxide particles by Space Shuttle engines and of sulfur dioxide molecules by volcanic activity are performed. The relation between measured aerosol variability and changes in stratospheric air temperatures and vertical transport rates are discussed.

Turco, R. P.↗

NASA NTRS1979

Review of composite propellant burn rate modeling

Steady-state combustion modeling of composite solid propellants is discussed with emphasis on the Beckstead-Derr-Price (BDP) model. The BDP model and some revisions are considered with respect to the analysis of monomodal ammonium perchlorate/inert binder propellants: topics examined include continuity relations, surface area relations, characteristic surface dimension, flame heights, and energy balance. Application of the BDP model to more complicated propellants containing multiple active ingredients is described. These propellants include multimodal, mixed oxidizer, active binder, aluminized, catalyzed, and nitramine propellants. Example cases of modeling (with comparison to experimental data) are presented, and strengths and weaknesses of current modeling approaches are evaluated.

Cohen, N. S.↗

NASA NTRS1979

Lean stability augmentation for premixing, prevaporizing combustors

An experimental program was conducted to investigate techniques for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Augmented flameholders employing recessed perforated plates, catalyzed tube bundles, and configurations in which pilot fuel was injected into the wakes of V-gutters or perforated plates were designed and tested. Stable operation of the piloted designs was achieved at equivalence ratios as low as 0.25; NOx emissions of less than 1.0 g/kg at simulated turbine engine cruise conditions were obtained. A piloted perforated plate employing four percent pilot fuel flow produced the best performance while meeting severe NOx constraints.

Mcvey, J. B.↗

NASA NTRS1979

Improved and lower cost sealing of aerospace structure

An improved sealing method has been developed for the exposed metal fastener surfaces of the Solid Rocket Booster vehicle for the Space Shuttle launch system. The method employs properly sized flexible plastic caps filled with catalyzed polysulfide sealant, frozen and stored. At the time of use, the caps and sealant are thawed and positioned on the fasteners. The sealant covers the exposed portion of the fastener and prevents salt water damage. The method is one of high reliability with low installation and inspection costs.

Angeloni, D. J.↗

NASA NTRS1979

Solar-driven chemical energy source for a Martian biota

Microorganisms deep in the Martian soil could derive energy indirectly from the sun via chemical reactions involving atmospheric photolysis products of the solar ultraviolet flux. The Viking discovery of a chemically uniform regolith which, though poor in organics, is rich in sulfur-containing compounds suggests reaction sequences in which sulfur is recycled through reduced and oxidized states by biologically catalyzed reactions with photochemically-produced atmospheric constituents. One candidate reaction, reduction of soil sulfate minerals by molecular hydrogen, is already exploited on earth by bacteria of the ubiquitous and tenacious Desulfovibrio genus.

Clark, B. C.↗