SEARCH · Search NASA

Results for “collaborative analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Space radiation studies for the reporting period, June 1983 - July 1984

Two Active Radiation Dosimeters (ARD's) flown on Spacelab 1, performed without fault and were returned to Space Science Laboratory, MSFC for recalibration. During the flight in December 1983, performance was monitored at the Huntsville Operations Center (HOSC). Despite some problems with the Shuttle data system handling the VFI, it could be established that the ARD's were operating normally. Postflight calibrations of both units determined that sensitivities were essentially unchanged from preflight values. Flight tapes were received for approximately 60% of the flight and it appears that this is the total available. The next phase of effort will involve close collaboration with Space Science Laboratory, MSFC, in the analysis of this data. The Nuclear Radiation Monitor (NRM) was under assembly and testing at MSFC. Support was rendered in the areas of materials control and parts were supplied for the supplementary heaters, dome gas-venting device and photomultiplier tube housing. Performance characteristics of some flight-space photomultipliers were measured.

Source record↗

NASA NTRS1994

A distributed analysis and visualization system for model and observational data

Software was developed with NASA support to aid in the analysis and display of the massive amounts of data generated from satellites, observational field programs, and from model simulations. This software was developed in the context of the PATHFINDER (Probing ATmospHeric Flows in an Interactive and Distributed EnviRonment) Project. The overall aim of this project is to create a flexible, modular, and distributed environment for data handling, modeling simulations, data analysis, and visualization of atmospheric and fluid flows. Software completed with NASA support includes GEMPAK analysis, data handling, and display modules for which collaborators at NASA had primary responsibility, and prototype software modules for three-dimensional interactive and distributed control and display as well as data handling, for which NSCA was responsible. Overall process control was handled through a scientific and visualization application builder from Silicon Graphics known as the Iris Explorer. In addition, the GEMPAK related work (GEMVIS) was also ported to the Advanced Visualization System (AVS) application builder. Many modules were developed to enhance those already available in Iris Explorer including HDF file support, improved visualization and display, simple lattice math, and the handling of metadata through development of a new grid datatype. Complete source and runtime binaries along with on-line documentation is available via the World Wide Web at: http://redrock.ncsa.uiuc.edu/ PATHFINDER/pathre12/top/top.html.

Wilhelmson, Robert B.↗

NASA NTRS1999

Software Development Processes Applied to Computational Icing Simulation

The development of computational icing simulation methods is making the transition form the research to common place use in design and certification efforts. As such, standards of code management, design validation, and documentation must be adjusted to accommodate the increased expectations of the user community with respect to accuracy, reliability, capability, and usability. This paper discusses these concepts with regard to current and future icing simulation code development efforts as implemented by the Icing Branch of the NASA Lewis Research Center in collaboration with the NASA Lewis Engineering Design and Analysis Division. With the application of the techniques outlined in this paper, the LEWICE ice accretion code has become a more stable and reliable software product.

Levinson, Laurie H.↗

NASA NTRS2001

International Research Workshop on Integrating GIS and Environmental Modeling: Problems, Prospects, and Research Needs

The 4th International Conference on Integrating GIS and Environmental Modeling (GIS/EM4) was convened in Banff, Canada, September 2-8, 2000 at The Banff Centre for Conferences. The meeting's purpose, like it's predecessors was to reformulate, each three to four years, the collaborative research agenda for integrating spatio-temporal analysis with environmental simulation modeling.

Parks, Bradley↗

NASA NTRS2001

International Research Workshop on Integrating GIS and Environmental Modeling: Problems, Prospects, and Research Needs

Parks, Bradley↗

NASA NTRS1994

Data Communications Requirements for CAS Applications

This paper discusses the long-haul data communications requirements needed to support visualization of Computational Aeroscience (CAS) simulations. A scientific computing model is presented, from which current communications requirements are derived. This model is then expanded to describe the CAS Collaborative Visualization Environment, in which scientists from multiple NASA centers will collaborate on multidisciplinary, time-accurate simulations. An analysis of this model, along with data from the TFCC Workload Model, shows that CAS data communications requirements will increase to 10-100 megabytes/second by 1996.

McCabe, James D.↗

NASA NTRS2006

Supporting Energy-Related Societal Applications Using NASA's Satellite and Modeling Data

Improvements to NASA Surface Meteorology and Solar Energy (SSE) web site are now being made through the Prediction of Worldwide Energy Resource (POWER) project under NASA Science Mission Directorate Applied Science Energy Management Program. The purpose of this project is to tailor NASA Science Mission results for energy sector applications and decision support systems. The current status of SSE and research towards upgrading estimates of total, direct and diffuse solar irradiance from NASA satellite measurements and analysis are discussed. Part of this work involves collaborating with partners such as the National Renewable Energy Laboratory (NREL) and the Natural Resources Canada (NRCan). Energy Management and POWER plans including historic, near-term and forecast datasets are also overviewed.

Stackhouse, Paul W., Jr.↗

NASA NTRS2009

Communication Optimizations for a Wireless Distributed Prognostic Framework

Distributed architecture for prognostics is an essential step in prognostic research in order to enable feasible real-time system health management. Communication overhead is an important design problem for such systems. In this paper we focus on communication issues faced in the distributed implementation of an important class of algorithms for prognostics - particle filters. In spite of being computation and memory intensive, particle filters lend well to distributed implementation except for one significant step - resampling. We propose new resampling scheme called parameterized resampling that attempts to reduce communication between collaborating nodes in a distributed wireless sensor network. Analysis and comparison with relevant resampling schemes is also presented. A battery health management system is used as a target application. A new resampling scheme for distributed implementation of particle filters has been discussed in this paper. Analysis and comparison of this new scheme with existing resampling schemes in the context for minimizing communication overhead have also been discussed. Our proposed new resampling scheme performs significantly better compared to other schemes by attempting to reduce both the communication message length as well as number total communication messages exchanged while not compromising prediction accuracy and precision. Future work will explore the effects of the new resampling scheme in the overall computational performance of the whole system as well as full implementation of the new schemes on the Sun SPOT devices. Exploring different network architectures for efficient communication is an importance future research direction as well.

Saha, Sankalita↗

NASA NTRS2010

Potential Use of In Situ Material Composites such as Regolith/Polyethylene for Shielding Space Radiation

NASA has an extensive program for studying materials and methods for the shielding of astronauts to reduce the effects of space radiation when on the surfaces of the Moon and Mars, especially in the use of in situ materials native to the destination reducing the expense of materials transport. The most studied material from the Moon is Lunar regolith and has been shown to be as efficient as aluminum for shielding purposes (1). The addition of hydrogenous materials such as polyethylene should increase shielding effectiveness and provide mechanical properties necessary of structural materials (2). The neutron radiation shielding effectiveness of polyethylene/regolith stimulant (JSC-1A) composites were studied using confluent human fibroblast cell cultures exposed to a beam of high-energy spallation neutrons at the 30deg-left beam line (ICE house) at the Los Alamos Neutron Science Center. At this angle, the radiation spectrum mimics the energy spectrum of secondary neutrons generated in the upper atmosphere and encountered when aboard spacecraft and high-altitude aircraft. Cell samples were exposed in series either directly to the neutron beam, within a habitat created using regolith composite blocks, or behind 25 g/sq cm of loose regolith bulk material. In another experiment, cells were also exposed in series directly to the neutron beam in T-25 flasks completely filled with either media or water up to a depth of 20 cm to test shielding effectiveness versus depth and investigate the possible influence of secondary particle generation. All samples were sent directly back to JSC for sub-culturing and micronucleus analysis. This presentation is of work performed in collaboration with the NASA sponsored Center for Radiation Engineering and Science for Space Exploration (CRESSE) at Prairie View A&M.

Theriot, Corey A.↗

NASA NTRS2012

Large Scale Experiments on Spacecraft Fire Safety

Full scale fire testing complemented by computer modelling has provided significant know how about the risk, prevention and suppression of fire in terrestrial systems (cars, ships, planes, buildings, mines, and tunnels). In comparison, no such testing has been carried out for manned spacecraft due to the complexity, cost and risk associated with operating a long duration fire safety experiment of a relevant size in microgravity. Therefore, there is currently a gap in knowledge of fire behaviour in spacecraft. The entire body of low-gravity fire research has either been conducted in short duration ground-based microgravity facilities or has been limited to very small fuel samples. Still, the work conducted to date has shown that fire behaviour in low-gravity is very different from that in normal-gravity, with differences observed for flammability limits, ignition delay, flame spread behaviour, flame colour and flame structure. As a result, the prediction of the behaviour of fires in reduced gravity is at present not validated. To address this gap in knowledge, a collaborative international project, Spacecraft Fire Safety, has been established with its cornerstone being the development of an experiment (Fire Safety 1) to be conducted on an ISS resupply vehicle, such as the Automated Transfer Vehicle (ATV) or Orbital Cygnus after it leaves the ISS and before it enters the atmosphere. A computer modelling effort will complement the experimental effort. Although the experiment will need to meet rigorous safety requirements to ensure the carrier vehicle does not sustain damage, the absence of a crew removes the need for strict containment of combustion products. This will facilitate the possibility of examining fire behaviour on a scale that is relevant to spacecraft fire safety and will provide unique data for fire model validation. This unprecedented opportunity will expand the understanding of the fundamentals of fire behaviour in spacecraft. The experiment is being developed by an international topical team that is collaboratively defining the experiment requirements and performing supporting analysis, experimentation and technology development. This paper presents the objectives, status and concept of this project.

Urban, David L.↗

NASA NTRS2012

Large Scale Experiments on Spacecraft Fire Safety

Full scale fire testing complemented by computer modelling has provided significant knowhow about the risk, prevention and suppression of fire in terrestrial systems (cars, ships, planes, buildings, mines, and tunnels). In comparison, no such testing has been carried out for manned spacecraft due to the complexity, cost and risk associated with operating a long duration fire safety experiment of a relevant size in microgravity. Therefore, there is currently a gap in knowledge of fire behaviour in spacecraft. The entire body of low-gravity fire research has either been conducted in short duration ground-based microgravity facilities or has been limited to very small fuel samples. Still, the work conducted to date has shown that fire behaviour in low-gravity is very different from that in normal gravity, with differences observed for flammability limits, ignition delay, flame spread behaviour, flame colour and flame structure. As a result, the prediction of the behaviour of fires in reduced gravity is at present not validated. To address this gap in knowledge, a collaborative international project, Spacecraft Fire Safety, has been established with its cornerstone being the development of an experiment (Fire Safety 1) to be conducted on an ISS resupply vehicle, such as the Automated Transfer Vehicle (ATV) or Orbital Cygnus after it leaves the ISS and before it enters the atmosphere. A computer modelling effort will complement the experimental effort. Although the experiment will need to meet rigorous safety requirements to ensure the carrier vehicle does not sustain damage, the absence of a crew removes the need for strict containment of combustion products. This will facilitate the possibility of examining fire behaviour on a scale that is relevant to spacecraft fire safety and will provide unique data for fire model validation. This unprecedented opportunity will expand the understanding of the fundamentals of fire behaviour in spacecraft. The experiment is being developed by an international topical team that is collaboratively defining the experiment requirements and performing supporting analysis, experimentation and technology development. This paper presents the objectives, status and concept of this project.

Urban, David↗

NASA NTRS2017

One Step Closer to Mars with Aquaponics: Cultivating Citizen Science in K12 Schools

The Microbial Ecology and Biogeochemistry Research Laboratory at NASA Ames Research Center focuses primarily on the nutrient cycling and diversity of complex microbial communities. NASA is interested in the composition and functioning of microbial mat communities as these processes fundamentally shape the form and function of these analogs for the earliest forms of life on Earth (3.6 billion years ago), and likely will on other planets as well. Aquaponics systems are supported by microbial communities who perform many complex ecosystem services, including cycling nitrogen. Microbes are integral to the stability and productivity of aquaponics systems, which are analogous to microbial communities in food production systems that are essential for building efficient life support systems for long-distance space travel. Students at Meadow Park Middle School created 10 parallel aquaponics systems and took temporal microbial samples to characterize whether any macro-ecology variables impacted or changed the microbial diversity of these systems. Students additionally created a website so that other classrooms can pursue similar projects in their own schools (https://go.nasa.gov/2uJhxmF). Our lab at NASA Ames has sequenced water samples from each of the 10 tanks at 3 timepoints using a MinION sequencer. MPMS students will be involved in the analysis of the bioinformatics data generated through this collaboration. Our ongoing collaboration aims to collect and analyze data in the classroom setting that has utility for research scientists, while involving students as collaborators in the research process.

Kolattukudy, Maria↗

NASA NTRS2024

Satellite NO 2 Trends and Hotspots Over Offshore Oil and Gas Operations in the Gulf of Mexico

The Outer Continental Shelf of the Gulf of Mexico (GOM) is populated with numerous oil and natural gas (ONG) platforms which produce NO x (NO x = NO + NO 2 ), a major component of air pollution. The Bureau of Ocean Energy Management (BOEM) is mandated to ensure that the air quality of coastal states is not degraded by these emissions. As part of a NASA-BOEM collaboration, we conducted a satellite data-based analysis of nitrogen dioxide (NO 2 ) patterns and trends in the GOM. Data from the OMI and TROPOMI sensors were used to obtain 18+ year records of tropospheric column (TrC) NO 2 in three GOM regions: (a) Houston urban area, (b) near shore area off the Louisiana coast, and a (c) deepwater area off the Louisiana coast. The 2004–2022 time series show a decreasing trend for the urban (−0.027 DU/decade) and near shore (−0.0022 DU/decade) areas, and an increasing trend (0.0019 DU/decade) for the deepwater area. MERRA-2 wind and TROPOMI NO 2 data were used to reveal several NO2 hotspots (up to 25% above background values) under calm wind conditions near individual platforms. The NO 2 signals from these deepwater platforms and the high density of shallow water platforms closer to shore were confirmed by TrC NO 2 anomalies of up to 10%, taking into account the monthly TrC NO 2 climatology over the GOM. The results presented in this study establish a baseline for future estimates of emissions from the ONG hotspots and provide a methodology for analyzing NO 2 measurements from the new geostationary TEMPO instrument.

NO2↗

NASA NTRSDate not supplied

Thermal Protection Systems and Materials

Thermal protection systems protect space vehicles from aerodynamic heating during entry into planetary atmospheres. The Thermal Protection Materials Branch combines experiment, fabrication, characterization, evaluation, analysis and modeling to support NASA missions and collaborates externally to technology transfer thermal protection materials and tools to commercial or other agency partners.

Modeling↗

NASA NTRS2018

Sensitivity Analysis for Multidisciplinary Systems (SAMS)

This report describes the research conducted under an interagency collaboration agreement between the Aerospace Systems Directorate of the Air Force Research Laboratory (AFRL/RQ) and the Computational AeroSciences Branch of NASA Langley (NASA LaRC). Both organizations have a long-term goal of developing a modular computational system for coupling fluids and structures to enable both analysis and optimization of aerospace vehicles. Ultimately, the system should support multiple solvers within the fluid and structure domains to allow the best combination for the task at hand, as well as to allow for institutional preferences of specific software components. Towards this goal, the current research was focused on enhancing the existing modal aeroelastic analysis in the NASA FUN3D (Fully-UNstructured three-dimensional CFD (Computational Fluid Dynamics) code) software (Biedron et al. 2018), as well as developing new aeroelastic analysis and optimization capabilities based on a non-linear finite-element method. The methods and enhancements described in this document pertain to FUN3D Version 13.4.

Biedron, Robert T.↗

NASA NTRS1999

Aerospace Systems Design in NASA's Collaborative Engineering Environment

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across the Agency.

Monell, Donald W.↗

NASA NTRS2000

Aerospace Systems Design in NASA's Collaborative Engineering Environment

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operation). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographical distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across Agency.

Monell, Donald W.↗

NASA NTRS2019

Quantifying the Impact of Systems Interdependencies in Space Systems Architectures

Due to the high number of systems in a space mission architecture and to their complex interactions, identifying risk and critical operational dependencies is not obvious. Traditional systems engineering methodology and risk assessment does not capture the impact of interactions between systems nor the cascading effects of disruptions. Based on these considerations, the Systems Operational Dependency Analysis methodology was developed for use by systems analysts and decision makers. This methodology utilizes a parametric model of interdependencies between systems to quantify the direct and indirect impact of system disruptions on other systems, as well as identify root causes. The results are effective at providing decision support for prioritizing technology investment based on risk reduction associated with potential system disruptions. Expanding on research presented at IAC 2018 and based on a collaboration with NASA Marshall Space Flight Center, this paper applies the Systems Operational Dependency Analysis methodology to NASA Lunar Gateway in collaboration with NASA’s lunar exploration plans. The paper presents a hierarchical representation of the interdependencies between a Gateway habitat’s systems and subsystems, demonstrates quantification of the impact of disruption, and assesses the criticality of the constituent systems and subsystems.

Guariniello, Cesare↗