Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Carrot rhamnogalacturonan I structure and composition changed during 2017 in California

Detailed composition, fine structure, and function were determined for carrot pomace fiber remaining after commercial juice extraction from carrots harvested at four different times during 2017, in different California, USA locations. This pomace was treated with commercial enzymes and the changes in carbohydrate composition were analyzed. The enzyme-treated carrot pomace contained pectic oligosaccharides that were branched, unsaturated, partially acetylated and methylated rhamnogalacturonan I (RG-I) with arabinogalacto-oligosaccharide side chains as well as free galacto-oligosaccharides and galacturono-oligosaccharides detected by MALDI-TOF MS and NMR analysis. The molecular weight and degree of galacto-oligosaccharide polymerization decreased while water solubility increased following enzymatic treatment. While carrot soluble dietary fiber remained relatively constant, insoluble dietary fiber and total dietary fiber increased during the year. The carrot pomace fiber structure changed between the June and September harvests so that it was more susceptible to enzymatic degradation, and its shape became more linear. The diversity of carrot RG-I oligosaccharide structures was the greatest in the enzyme-treated pomace harvested in September and the RG-I became almost completely debranched by the enzyme treatment for the pomace harvested in December. The structural properties of these carrot pomace fiber fractions suggest that they can function as a low viscosity beverage food ingredient, and the rhamnogalacturonan I structure indicated the potential for anti-viral, immuno-modulatory and prebiotic properties. Furthermore, the rhamnogalacturonan structural composition changes during the growing season highlights the need for bioactivity monitoring of carrot pomace obtained from different sources, and harvested at different times during the year.

59 BASIC BIOLOGICAL SCIENCES↗

Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.

CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.

Wang, Wennie↗

Insights into Stress Corrosion Cracking Mechanisms from High-Resolution Measurements of Crack-Tip Structures and Compositions

The fundamental basis for mechanistic understanding and modeling of SCC remains in question for many systems. Specific mechanisms controlling SCC can vary with changes in alloy characteristics, applied/residual stress or environmental conditions. The local crack electrochemistry, crack-tip mechanics and material metallurgy are the main factors controlling crack growth. These localized properties are difficult or impossible to measure in active cracks. Nevertheless, it is essential to quantitatively interrogate these crack-tip conditions if mechanistic understanding is to be obtained. A major recent advance has been the ability to investigate SCC cracks and crack tips using high-resolution ATEM techniques. ATEM enables the characterization of SCC cracks including trapped tip solution chemistries, corrosion product/film compositions and structures, and elemental composition gradients and defect microstructures along the crack walls and at the crack tip. A wide variety of methods for imaging and analyses at resolutions down to the atomic level can be used to examine the crack and corrosion film characteristics. Surface films and reaction layers have been examined by cross-sectional TEM techniques, but little work had been conducted on environmentally induced internal cracks until that of Lewis and co-workers [1-3] and the current authors [4-17]. This capability combined with modern ATEM techniques has enabled exciting new insights into corrosion processes occurring at buried interfaces and is being used to identify mechanisms controlling IGSCC in boiling water reactor (BWR) and pressurized water reactor (PWR) components. The objective of this paper is to summarize certain results focused on IGSCC of Fe- base and Ni-base stainless alloys in high-temperature water environments. Representative crack-tip examples will be shown to illustrate specific aspects that are characteristic of SCC in the material/environment combinations. Differences and similarities in crack-tip structures- chemistries will be highlighted comparing Fe-base 316/304SS to Ni-base alloy 600/182 and for tests in oxidizing versus hydrogenated water environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advances in Computational Stability Analysis of Composite Aerospace Structures

European aircraft industry demands for reduced development and operating costs. Structural weight reduction by exploitation of structural reserves in composite aerospace structures contributes to this aim, however, it requires accurate and experimentally validated stability analysis of real structures under realistic loading conditions. This paper presents different advances from the area of computational stability analysis of composite aerospace structures which contribute to that field. For stringer stiffened panels main results of the finished EU project COCOMAT are given. It investigated the exploitation of reserves in primary fibre composite fuselage structures through an accurate and reliable simulation of postbuckling and collapse. For unstiffened cylindrical composite shells a proposal for a new design method is presented.

36 MATERIALS SCIENCE↗

Structural and compositional investigations of Zr{sub 4}Pt{sub 2}O: A filled-cubic Ti{sub 2}Ni-type phase

Syntheses, structural and compositional analyses of the filled cubic Ti{sub 2}Ni-type phase in Zr-Pt-O system have been studied, largely for the platinum-richer compositions. Diffraction quality crystals were grown by annealing an arc-melted composition Zr{sub 4}Pt{sub 2}O{sub 0.66} at 1600 deg. C under Ar. The refined composition Zr{sub 4.0}Pt{sub 1.95(1)}O{sub 0.93(6)} (a=12.5063(6) A, Fd3-barm, Z=16) is close to the idealized composition Zr{sub 4}Pt{sub 2}O known in several other Zr-T-O systems (T=late 4d or 5d transition element). (This composition has been erroneously reported by ICDD for years as Zr{sub 6}Pt{sub 3}O (No. 00-017-0557) and referred to as epsilon-Zr{sub 6}Pt{sub 3}O.) The product is only marginally poor in platinum and oxygen, in contrast to the 1960 reports of metallographic studies ({approx}Zr{sub 4}Pt{sub 1.62}O{sub 0.44}). Under arc-melting conditions, high yields of the cubic phase are obtained from samples with lower platinum concentrations (Zr{sub 4}Pt{sub 1.74}O{sub 1.04}), whereas samples near the refined cubic composition contain hexagonal Zr{sub 5}Pt{sub 3}O{sub x} as well (Mn{sub 5}Si{sub 3}-type). The hexagonal structure of binary Zr{sub 5}Pt{sub 3} was also refined (Mn{sub 5}Si{sub 3} type, P6{sub 3}/mcm, a=8.210(1) A, c=5.385(2) A) and shown to be non-stoichiometric to at least Zr{sub 5}Pt{sub 2.5}. - Graphical abstract: The figure shows the environments of three atom types in the corrected structure, an oxygen-stuffed Ti{sub 2}Ni type.

36 MATERIALS SCIENCE↗

Tailoring characteristic thermal stability of Ni-Au binary nanocrystals via structure and composition engineering: theoretical insights into structural evolution and atomic inter-diffusion

We report on the structural evolution and atomic inter-diffusion characteristics of the bimetallic Ni-Au nanocrystals (NCs) by molecular dynamics simulations studies. Our results reveal that the thermal stability dynamics of Ni-Au NCs strongly depends on the atomic configurations. By engineering the structural construction with Ni:Au = 1:1 atomic composition, compared with core-shell Au@Ni and alloy NCs, the melting point of core-shell Ni@Au NCs is significantly enhanced up to 1215 K. Unexpectedly, with atomic ratio of Au:Ni= 1:9, the melting process initiates from the atoms in the shell of Ni@Au and alloy NCs, while starts from the core of Au@Ni NCs. The corresponding features and evolution process of structural motifs, mixing and segregation are illustrated via a series of dynamic simulations videos. Moreover, our results revealed that the face centered cubic phase Au{sub 0.75}Ni{sub 0.25} favorably stabilizes in NCs form but does not exist in the bulk counterpart, which elucidates the anomalies of previously reported experimental results on such bimetallic NCs.

36 MATERIALS SCIENCE↗

Formation of structure, phase composition and properties of electro explosion resistant coatings using electron-beam processing

For the first time, the high intensity electron beam modification of electroexplosion composite coatings of Mo Cu, Mo C Cu, W Cu, W C Cu and TiB{sub 2} Cu systems was done. The studies of phase and elemental composition, defective structure conditions of these coatings were carried out. The regimes of electron-beam processing making possible to form the dense, specular luster surface layers having a submicrocrystalline structure were revealed. It was established that electron-beam processing of elecroexplosion spraying of layer of elecroexplosion spraying carried out in the regime of melting results in the formation of structurally and contrationally homogeneous surface layer. Investigation of the effect of electron-beam processing of electroexplosion electroerosion resistant coatings on their tribological properties (wear resistanse and coefficient of friction) and electroerosion resistance was done. It was shown that all the examined costings demonstrate the increase of electroerosion resistance in spark erosion up to 10 times.

36 MATERIALS SCIENCE↗

Structure and composition of blueberry fiber pectin and xyloglucan that bind anthocyanins during fruit puree processing

Blueberry is a well-known source of antioxidants and prebiotic dietary fiber yet the fate of these health-beneficial ingredients during fruit processing it is not understood. Detailed composition and structure of blueberry pomace (PF) remaining after commercial blueberry fruit puree processing, as well as the water soluble and water insoluble fractions, were determined. The PF was comprised of dietary fiber (60.8%) that was largely insoluble (46.2% vs. 14.6% soluble dietary fiber) pectin, xyloglucan, arabinoxylan and mannan polysaccharides, fructose (11.22%) and glucose (10.37%) free sugars, protein (9%), fat (5%), and anthocyanins (6444.5 μg/g). The most abundant anthocyanins detected in PF were malvidin 3-arabinoside and peonidin 3-glucoside and the pectin was determined to be methyl-esterified and acetylated rhamnogalacturonan I with a 4,5-unsaturated function at the non-reducing end based on oligosaccharide structural analysis. Blueberry PF xyloglucan oligosaccharide side chain structures included xylose, arabinose and galactose consistent with arabino-xyloglucan structure. Additionally, microwave-assisted extraction of blueberry PF (pH 2 for 10 min at 80 °C) was performed to more clearly elucidate pectin structure, and revealed a pectin polymer with high molar mass (1072 kDa) and viscosity that was dependent upon the molar mass. A random coil shape was confirmed for both the blueberry PF and microwave extracted blueberry pectin, which agreed with previous reports that flexible blueberry pectin contributes to strong anthocyanin binding. In summary, the blueberry pomace anthocyanin content was slightly higher than that reported for fresh whole blueberry fruit, which suggests that most blueberry anthocyanins adhered to the pomace fiber, and most likely the insoluble pectin, during and after processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conduction of the three-dimensional model of a composite with structural anisotropy

The electric conduction of the model of a structurally anisotropic composite that represents an isotropic matrix with disk-shaped inclusions (oblate spheroids) is analytically studied. The disks have the same orientation and their centers are randomly distributed in the composite volume. The cases of dielectric and ideally conducting inclusions are considered. The conduction of the model in a broad concentration range is described by the approximate effective medium method. Conduction in the critical region (in the vicinity of the metal–dielectric phase transition point) is studied using the similarity hypothesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling the Structure and Composition of Li 4 Mn 2 O 4.5 (Li 2 O·Li 0.667 Mn 1.333 O 2 ) Electrodes for Lithium Batteries Using a High-Temperature Synthesis Approach

This paper addresses the debate about the composition and structure of a lithium-rich manganese oxide electrode with a fully disordered rock salt component, Li 4 Mn 2 O 5 (or Li 2 O·2LiMnO 2 ), first reported by Freire et al. in 2016; it is typically prepared by a high-energy ball milling procedure. It has now been demonstrated that, when prepared at 800°C, the formula of this compound is Li 4 Mn 2 O 4.5 , alternatively Li 2 O·Li 0.667 Mn 1.333 O 2 , or close thereto. The cubic, disordered Li 0.667 Mn 1.333 O 2 (or Li 0.333 Mn 0.667 O) rock salt component, in which the manganese ions adopt an average oxidation state of 2.5+, transforms to a clearly-defined spinel configuration during electrochemical cycling. The electrochemical activation process that occurs during the initial charge reaction includes the oxidation of the manganese ions by oxygen released by the Li 2 O component between 4.5 and 4.6 V. In complete contrast, nickel- and nickel-cobalt-substituted electrodes, such as Li 2 O·2LiMn 0.5 Ni 0.5 O 2 (Li 4 MnNiO 5 ) and Li 2 O·2LiMn 0.475 Ni 0.475 Co 0.050 O 2 (Li 4 Mn 0.95 Ni 0.95 Co 0.10 O 5 ), in which the manganese ions adopt a tetravalent state, have completely disordered rock salt components that are electrochemically inactive.

25 ENERGY STORAGE↗

Protein–Mineral Interactions: Molecular Dynamics Simulations Capture Importance of Variations in Mineral Surface Composition and Structure

Molecular dynamics simulations, conventional and metadynamics, were performed to determine the interaction of model protein Gb1 over kaolinite (001), Na+-montmorillonite (001), Ca2+-montmorillonite (001), goethite (100), and Na+-birnessite (001) mineral surfaces. Gb1, a small (56 residue) protein with a well-characterized solution-state nuclear magnetic resonance (NMR) structure and having α-helix, four-fold β-sheet, and hydrophobic core features, is used as a model protein to study protein soil mineral interactions and gain insights on structural changes and potential degradation of protein. From our simulations, we observe little change to the hydrated Gb1 structure over the kaolinite, montmorillonite, and goethite surfaces relative to its solvated structure without these mineral surfaces present. Over the Na+-birnessite basal surface, however, the Gb1 structure is highly disturbed as a result of interaction with this birnessite surface. Unraveling of the Gb1 β-sheet at specific turns and a partial unraveling of the α-helix is observed over birnessite, which suggests specific vulnerable residue sites for oxidation or hydrolysis possibly leading to fragmentation.

Environmental Molecular Sciences Laboratory↗

Atomic layer deposition of 2D and 3D standards for synchrotron-based quantitative composition and structure analysis methods

Atomic layer deposition (ALD) is a scalable deposition technique known for producing uniform, conformal films of a wide range of compounds on nearly any substrate material. These traits make it an ideal deposition method for producing films to replace the National Institute of Standards and Technology (NIST) standards and create Standard Reference Materials (SRMs) on a wide range of relevant two-dimensional and three-dimensional substrates. The use of SRM from NIST for quantitative analysis of chemical composition using synchrotron based x-ray fluorescence (SR-XRF) and scanning transmission x-ray microscopy (STXM) is common. Such standards, however, can suffer from inhomogeneity in chemical composition and thickness and often require further calculations, based on sample mounting and detector geometry, to obtain quantitative results. These inhomogeneities negatively impact the reproducibility of the measurements and the quantitative measure itself. Utilizing Rutherford backscattering, x-ray reflectivity, quartz crystal microbalance, STXM, and SR-XRF, the authors show that ALD is capable of producing high quality standards that are homogenous over scales ranging from nanometers to 100s of micrometers.

Becker, Nicholas G.↗

Effect of oxidation and annealing on tunnel barrier structure and composition in IrMn/CoFe/TiO{sub x}/CoFe magnetic tunnel junctions

The effects of oxidation time and annealing conditions on sputter-deposited magnetic tunnel junctions with a TiO{sub x} barrier have been investigated. High resolution electron microscopy showed that longer oxidation times led to a significant increase in barrier layer width and to the formation of large volumes of oxides of Co and Fe. Annealing promoted extensive diffusion of Mn to the barrier region and the oxidation of Mn to MnO{sub x} concurrent with the reduction in oxides of Co and Fe. Annealing also increased the peak oxygen content of the barrier region and resulted in a distinct asymmetry in the barrier oxide structure.

36 MATERIALS SCIENCE↗

The local structure and composition of Ba{sub 4}Nb{sub 2}O{sub 9}-based oxycarbonates

X-ray powder-diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), infrared spectroscopy (IR), thermogravimetry (TG) and mass spectroscopy (MS) were performed to investigate the composition and the crystal structure of tetra-barium di-niobate (V) Ba{sub 4}Nb{sub 2}O{sub 9}. The TG, MS and IR studies revealed that the compound is a hydrated oxycarbonate. Assuming that the carbonate stoichiometrically replaces oxygen, the composition of the low-temperature {alpha}-modification, obtained by slow cooling from 1100 {sup o}C, corresponds to Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1H{sub 2}O, while the quenched high-temperature {gamma}-modification has the Ba{sub 4}Nb{sub 2}O{sub 8.42}(CO{sub 3}){sub 0.58}.0.38H{sub 2}O composition. The {alpha}-phase has a composite incommensurately modulated structure consisting of two mutually interacting [Ba]{sub {infinity}} and the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystems. The composite modulated crystal structure of the {alpha}-phase can be described with the lattice parameters a=10.2688(1) A, c=2.82426(8) A, q=0.66774(2)c* and a superspace group R3{sup -bar }m(00{gamma})0s. The HRTEM analysis demonstrates the nanoscale twinning of the trigonal domains parallel to the {l_brace}1 0 0{r_brace} crystallographic planes. The twinning introduces a one-dimensional disorder into the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystem, which results in an average P6{sup -bar }2c crystal structure of the {alpha}-phase. Possible places for the carbonate group in the structure are discussed using a comparison with other hexagonal perovskite-based oxycarbonates. - Graphical abstract: The composition and the local crystal structure of generally known {alpha}-Ba{sub 4}Nb{sub 2}O{sub 9} was studied. The compound is hydrated oxycarbonate with the composition of Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1 H{sub 2}O. It has a composite incommensurately modulated structure consisting of two mutually interacting subsystems, i.e., [Ba]{infinity} and the [(Nb,)O{sub 3}]{infinity} subsystem.

36 MATERIALS SCIENCE↗