Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Fundamental Insights into Cathode Stability: Linking Compositional Tuning and Local Coordination in Complex Metal Oxides under Aqueous Transformations

Compositional tuning of complex metal oxides in Li-ion battery materials influences their performance as well as their end-of-life behavior, in particular, the tendency to release toxic metal cations in aqueous solution. We modeled ternary variants of a parent LiCoO 2 delafossite structure by varying the metal identity and relative amounts. This yielded ten model formulations of Li(A 4/6 B 1/6 C 1/6 )O 2 , where the material is enriched with the A metal and doped with B and C, with Ni, Mn, Co, Fe, Al, V, and Ti as constituent metals. To assess their stability in aqueous conditions, metal release energetics were calculated using a combination of Density Functional Theory calculations and thermodynamics. Metal release in ternary oxides is dictated by subtle variations in the coordination environment of the leaving group. To identify governing chemical features across diverse compositions with varying local coordination environments, we leverage random forest regression and descriptor importance analysis. A key result is that metal–oxygen orbital hybridization, quantified using a projected density-of-states-derived descriptor, H d/p , provides a physically grounded measure of interaction strength that governs metal release energetics. This refined perspective goes beyond conventional oxidation state considerations and offers more robust insights for materials science. Finally, we model defect surface-bound O 2 dimer formation as a proxy for reactive oxygen species (ROS) generation. The results show that Ni-rich compositions more readily stabilize spin-polarized O 2 dimers, corroborating experimental reports of an increased ROS-driven biological response. In conclusion, our results establish a compositional and electronic basis for metal release and surface oxygen reactivity that form a rationale for complex metal oxide design principles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evidence for Lignin–Carbohydrate Complexes from Studies of Transgenic Switchgrass and a Model Lignin–Pectin Composite

Lignin–carbohydrate complexes (LCCs) form through interactions of lignin with plant cell wall polysaccharides and are thought to be a significant source of biomass recalcitrance. In this work, we investigated LCCs formed between lignin and pectin homogalacturonan (HG). The structural changes in HG deficient transgenic switchgrass (GAUT4-knockdown, GAUT4-KD) after hot water pretreatment were compared to wild-type plants using small-angle neutron scattering (SANS), which showed that there were ~2.2-fold more lignin aggregates in GAUT4-KD biomass compared to the wild type. This demonstrated that decreased pectin resulted in more lignin redistribution and suggested that interactions between lignin and HG restrict lignin mobility in plant cell walls. To better understand the types of interactions between lignin and pectin, a model composite was prepared by polymerizing either protiated or partially deuterated coniferyl alcohol to form a dehydrogenation polymer (DHP) in the presence of HG. Small-angle X-ray scattering (SAXS) showed that the DHP and HG form a highly interconnected network structure that is not observed in a physical mixture of the individual polymers. Contrast matching SANS revealed the structure of DHP and HG in the composite and showed that the HG forms a swollen interconnected polymer network (power-law exponent, P = 1.5) interspersed with DHP particles (radius of gyration, Rg, 264 Å) that are composed of solvent-accessible DHP polymers (P = 2.3). Fourier transform infrared spectroscopy showed a unique ester absorption band in the DHP/HG composites. Solid-state nuclear magnetic resonance (NMR) analysis also supports interactions between DHP and HG. Overall, this study provides new insights into the relationship between primary and secondary cell wall polymers during cell wall synthesis and how LCCs formed between pectin and lignin could represent a previously unrecognized source of biomass recalcitrance. This knowledge may help develop new approaches to modulate cell wall properties to improve biofuel and bioproduct production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Non-additive microbial community responses to environmental complexity

Environmental composition is a major, though poorly understood, determinant of microbiome dynamics. Here we ask whether general principles govern how microbial community growth yield and diversity scale with an increasing number of environmental molecules. By assembling hundreds of synthetic consortia in vitro, we find that growth yield can remain constant or increase in a non-additive manner with environmental complexity. Conversely, taxonomic diversity is often much lower than expected. To better understand these deviations, we formulate metrics for epistatic interactions between environments and use them to compare our results to communities simulated with experimentally-parametrized consumer resource models. We find that key metabolic and ecological factors, including species similarity, degree of specialization, and metabolic interactions, modulate the observed non-additivity and govern the response of communities to combinations of resource pools. Our results demonstrate that environmental complexity alone is not sufficient for maintaining community diversity, and provide practical guidance for designing and controlling microbial ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

High‐Throughput Computational Guided Development of Refractory Complex Concentrated Alloys‐based Composite

ULTIMATE is a leading-edge DOE program to develop ultrahigh temperature materials for gas turbine use in the aviation and power generation industries. This team, headquartered at West Virginia University and including collaborators from the National Energy Technology Laboratory and Advanced Manufacturing LLC, has developed a new class of ultra-high temperature Refractory Complex Concentrated Alloys-based Composites (RCCC) for high temperature applications such as combustion turbines used in the aerospace and energy industries. The RCCC consist of Refractory Complex Concentrated Alloys (RCCA) mixed with particles of Refractory High Entropy Carbides, to increase RCCA strength to withstand extreme conditions. These new materials optimize the balance among strength, creep (deformation), density, and stability at 1300 °C (2372 °F), while maintaining ductility once the alloy cools to room temperature. The research team has developed advanced manufacturing processes using the pulsed electric current and laser 3D printing to produce test coupons of these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Symmetry in Seeded Metal Nanocrystal Growth

Symmetry underpins the structure and function of the world around us and is also captured in modern nanomaterials, where changing the symmetry of a nanocrystal or the interparticle spacing and orientation of nanocrystal building blocks in a superlattice can give new function. However, the synthesis and assembly of nanocrystals have been limited largely to simple compositions and structures. It remains a grand challenge to achieve nanocrystals with compositional and structural complexity while maintaining the monodispersity required for their use. This Account will illustrate through recent examples that seeded methods enable the synthesis of compositionally and structurally complex multimetallic crystals with defined and predictable symmetries for applications in plasmonics and catalysis. This outcome arises because the barrier for heterogeneous nucleation (i.e., seeded) is lower than that of homogeneous nucleation, where seeds can serve as preferential sites for the growth of complex structures and crystal phases. Our analysis begins by considering metal overgrowth from single-crystalline seeds of different shapes and symmetries, where the kinetics of adatom addition to seeds relative to their diffusion across seeds accounts for the expressed nanocrystal shapes. These results are then compared to overgrowth from seeds with different internal structures (i.e., planar defects), where the relationships between nanocrystal size and volumetric strain energy and surface energy are discussed. A major finding from this analysis is that often the underlying symmetry of seeds can be predictably transferred to the final crystals during overgrowth processes. Consequences of this finding are the predictable syntheses of crystals with different hierarchies akin to snowcrystals as well as nanocrystals with complex compositions (e.g., quaternary nanoparticles). Yet, there are subtle aspects to seeded growth that pave a path toward examples where nanocrystal symmetry has been reduced compared to the original seeds in a controlled manner. As we found, both the concentrations of metal precursors and capping agents can impact whether symmetry is transferred or reduced during overgrowth. Examples from our laboratory will be placed in context to other reported strategies for symmetry breaking. As will be argued, understanding what conditions favor symmetry preservation versus symmetry reduction during seeded crystal growth is central to accessing next-generation crystal forms. The Account concludes by outlining synthetic challenges associated with forming nanoscale heterostructures with precise 3-D placement of different materials within a given nanocrystal as well as facet control within different material domain and interface engineering. Furthermore, we envision meeting these challenges through regioselective and chemoselective seeded syntheses for which a foundation is outlined herein.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Physically constrained 3D diffusion for inverse design of fiber-reinforced polymer composite materials

Designing fiber-reinforced polymer composites (FRPCs) with a tailored nonlinear stress-strain response is crucial for applications such as energy absorption in crash structures, flexible robotics, and impact-resistant protective gear. However, the inherent complexities of composite materials and the multitude of parameters involved, render traditional design and optimization methods inadequate for achieving effective inverse design of composites. In this paper, we present an AI-based inverse design framework that effectively and efficiently generates FRPCs with targeted nonlinear stress-strain responses. We introduce a physically constrained diffusion model (PC3D_Diffusion) capable of managing the complexities of composite materials and producing detailed, high-quality designs. We propose a loss-guided, learning-free approach to generate physically feasible microstructure designs by explicitly enforcing physical constraints during the generation process. For training purposes, 1.35 million FRPC samples were created, and their corresponding stress-strain curves were computed using established physics-based computational models. The results show that PC3D_Diffusion consistently generates high-quality designs with tailored mechanical behaviors, while guaranteeing compliance with the physical constraints. PC3D_Diffusion advances FRPC inverse design and may facilitate the inverse design of other 3D materials, offering potential applications in industries reliant on materials with custom mechanical properties.

Xu, Pei [Clemson Univ., SC (United States)]↗
DOE OSTI2021

Repository scale classification and decomposition of tandem mass spectral data

Various studies have shown associations between molecular features and phenotypes of biological samples. These studies, however, focus on a single phenotype per study and are not applicable to repository scale metabolomics data. Here we report MetSummarizer, a method for predicting (i) the biological phenotypes of environmental and host-oriented samples, and (ii) the raw ingredient composition of complex mixtures. We show that the aggregation of various metabolomic datasets can improve the accuracy of predictions. Since these datasets have been collected using different standards at various laboratories, in order to get unbiased results it is crucial to detect and discard standard-specific features during the classification step. We further report high accuracy in prediction of the raw ingredient composition of complex foods from the Global Foodomics Project.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Development of Additively Manufactured Complex Tools for Autoclave Cure Composites

IACMI Project 4.9, Tooling for Composites with Washout Features Produced by Additive Manufacturing, assembled a team including the industry lead, Ability Composites, NREL and Colorado State University (CSU). Ability Composites had originally expressed interest in alternate methods of producing tooling for composite parts. In follow-up discussions, it became clear that one of the bigger tooling challenges revolved around small production volume composite parts that were tooled on washout material due to the complex geometry. To build an understanding of the potential, both from a technology and a cost perspective, for replacing conventional washout tooling with 3D printed thermoplastic tooling, a number of commercially available dissolvable FDM printing materials were evaluated, leading to tooling representative of commercial articles of interest to Ability Composites. Ultimately, Ability Composites was able to directly compare autoclave processed prepreg composite parts produced on conventional washout tooling to composite parts molded on 3D printed dissolvable tooling produced at CSU. Small, laboratory test specimens were developed to investigate the structural performance of the candidate materials under autoclave processing conditions, which were nominally 121 °C (250 °F) and 345 kPa (50 psi). In addition, several internal structural configurations (infills) were evaluated under autoclave conditions using model materials. The results of these tests indicated that two materials, Stratasys ST 130 and Infinite Materials Solutions Aquasys 180 (AQ 180), were the best candidates, given the specified autoclave processing conditions. ST-130 was slightly more robust than AQ-180; however, the AQ-180 was carried forward as it was dissolvable in water, not requiring the basic solution needed to dissolve ST-130. Based on the preliminary material and 3D printed structures evaluations, larger tools with a truncated square pyramid geometry were created to produce prepreg composite test articles for 3D printed dissolvable tool evaluation under standard autoclave fabrication conditions. Two tools were manufactured using ST-130 and one tool using traditional ceramic washout tooling media. The tools were evaluated for geometric fidelity and surface roughness changes before and after carbon fiber/epoxy prepreg composites were manufactured on the tooling. The autoclave processing did not impact the geometry significantly and was completed at 121 °C and 345 kPa, indicating satisfactory tool performance. The results from surface roughness testing of both the resulting composite and the associated tooling indicated that an adequate surface resulted without the need for a surface sealing step, as was required for the conventional washout tooling. Based on results of the truncated pyramid tests as a basis, ST-130, AQ-120 and AQ-180 materials were carried forward to the tool geometry of interest to Ability Composites. These hollow rectangular bent ducts, which were complex in nature and not extractable after cure, were used to understand the impacts of tool material and thickness. One ST-130 tool was produced as a partially solid part, with an enclosed 40% dense infill region to reduce weight and material use. This was the same approach evaluated in the truncated pyramid portion of the study. This tool was to be envelope vacuum bagged and directly compared to a monolithic tool of conventional washout material. The traditional monolithic ceramic tool was manufactured by Ability composites using CNC-based subtractive methods. An additional five dissolvable polymer tools, manufactured from ST-130, AQ-120, and AQ-180, using a hollow design were 3D printed and used to produce carbon fiber/epoxy composite evaluation articles. These hollow dissolvable tools were expected to be less influenced by the autoclave conditions as the wall was solid and vacuum bagging was inside and outside the tool. This alternative geometry was also evaluated as an option in techno-economic modeling. Print times were reduced from in excess of 3 days to under 30 hours, while surface quality and and tool integrity were substantially improved in the transition from the partially solid tool to the hollow tooling concept. Ability Composites produced autoclave-cured prepreg ducts on each of these tools. The autoclave conditions utilized were more severe than those of the initial trials, reaching temperatures of 160 °C and a pressure of 414 kPa. Under these conditions, the partially solid 3D printed tool with skin and 40% dense infill crushed significantly; however, the thicker ST-130 hollow tool showed good promise, deforming only slightly. The thinner hollow tool walls were unsuccessful as were the other materials. Overall, the hollow tool manufacturing process saved significant amounts of time and material in manufacturing as compared to the solid ducts and produced composite surface quality improvements compared to the traditional washout tooling. The TEM was developed to allow direct comparisons between conventional washout tool manufacturing processes and those developed at CSU. It also allowed for two separate 3D printed tool geometries to be analyzed and compared. In this case, the square bent duct tool geometry was determined to be representative of common washout tools. This geometry was compared with a scaled-up version of it to assess differences in the two manufacturing processes based on tool size. The model was developed to make use of user input in the form of geometry details, process steps, manufacturing parameters, bulk material costs, capital equipment costs, and general costs to calculate overall labor, material, capital equipment, and energy costs per manufactured tool for the conventional and additive manufacturing processes for the two representative geometries. It was also able to estimate step-by-step process times for the manufacturing process and geometries. Based on significant input from Ability Composites and CSU from their knowledge gained from hands-on manufacturing of the 3D printed bent duct tool geometry, costs and process times were calculated for the two manufacturing processes. Results showed that the additive manufacturing techniques developed at CSU can substantially reduce the costs of tool manufacturing by reducing labor times and material usage. This is because additive manufacturing is a relatively hands-off process and allows for the tool design to be optimized to reduce material usage. The disadvantage, however, is that process times for additive manufacturing are significantly longer. The three-dimensional (3D) printing process is slow if tight tolerances are required, but the analysis did show that print times could be reduced with the hollow tool geometry. Also, further advances in additive manufacturing could expedite the process. Costs and process times for the tool washout process were calculated separately. They showed that costs are relatively insignificant when compared to the overall tool manufacturing processes, but with increases in tool size, costs for the conventional manufacturing approach are larger than for additive manufacturing. Again, the washout process for conventional tools is very hands-on, whereas for additively manufactured tools the print medium is dissolved in an automated detergent bath at the sacrifice of process time. The analysis showed that optimizing the additively manufactured tools may also reduce washout times. Overall, Project 4.9 demonstrated that commercially available dissolvable 3D printing materials exist that can be used to produce dissolvable tooling capable of surviving prepreg composites fabrication under autoclave conditions of 121 °C (250 °F) and 345 kPa (50 psi). An alternative hollow dissolvable tool design was developed which was structurally superior to the initial concept and was cost and time effective versus conventional washout tooling. The 3D printed sacrificial tool required no added surface sealing steps prior to composite part layup and cure, offering a significant advantage over the porous conventional washout tooling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural basis for dimerization quality control

Most quality control pathways target misfolded proteins to prevent toxic aggregation and neurodegeneration 1 . Dimerization quality control further improves proteostasis by eliminating complexes of aberrant composition 2 , but how it detects incorrect subunits remains unknown. Here we provide structural insight into target selection by SCF-FBXL17, a dimerization-quality-control E3 ligase that ubiquitylates and helps to degrade inactive heterodimers of BTB proteins while sparing functional homodimers. We find that SCF-FBXL17 disrupts aberrant BTB dimers that fail to stabilize an intermolecular β-sheet around a highly divergent β-strand of the BTB domain. Furthermore, complex dissociation allows SCF-FBXL17 to wrap around a single BTB domain, resulting in robust ubiquitylation. SCF-FBXL17 therefore probes both shape and complementarity of BTB domains, a mechanism that is well suited to establish quality control of complex composition for recurrent interaction modules.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Pseudo-Polymorphism in Layered FeS Intercalates: A Competition between Charged and Neutral Guest Species

Systematic synthesis studies of the formation of tetrahedral FeS-ethylenediamine intercalates resulted in the synthesis of a new compound, [Fe 9.4(2) S 10 ][Fe(en) 3 ] 0.6(1) ·en 0.9 ( 3 ). The composition and complex crystal structure were determined based on a synergistic combination of elemental composition, decomposition behavior, high-resolution synchrotron X-ray diffraction and total scattering, 57 Fe Mössbauer spectroscopy, and electron diffraction. The structural model was derived based on a systematic comparison to the previously reported structures [Fe 8 S 10 ][Fe(en) 3 ] 1 ·en 0.5 and tetragonal FeS. The new compound has flat Fe 9.4 S 10 layers, analogous to those in superconducting binary FeS. In the crystal structure of [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 , the interlayer space is occupied by [Fe(en) 3 ] 2+ complexes and neutral ethylenediamine molecules in a ~2:3 ratio. Interlayer species are not randomly oriented but ordered as evidenced by superstructural diffraction peaks in both high-resolution X-ray diffraction and electron diffraction patterns. Magnetic studies reveal no superconducting transition down to 2 K, indicating that the presence of minute amounts (~6%) of iron vacancies at the Fe-S layer in [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 is still sufficient to shift the position of the Fermi level resulting in an adjustment of the properties. Here, our work shows the importance of detailed characterization of the crystal structure of intercalated compounds to understand the origin of the observed properties and develop proper structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Emerging investigator series: influence of marine emissions and atmospheric processing on individual particle composition of summertime Arctic aerosol over the Bering Strait and Chukchi Sea

The Arctic is rapidly transforming due to sea ice loss, increasing shipping activity, and oil and gas development. Associated marine and combustion emissions influence atmospheric aerosol composition, impacting complex aerosol–cloud–climate feedbacks. To improve understanding of the sources and processes determining Arctic aerosol composition, atmospheric particles were collected aboard the Korean icebreaker R/V Araon cruising within the Bering Strait and Chukchi Sea during August 2016. Offline analyses of individual particles by microspectroscopic techniques, including scanning electron microscopy with energy dispersive X-ray spectroscopy and atomic force microscopy with infrared spectroscopy, provided information on particle size, morphology, and chemical composition. The most commonly observed particle types were sea spray aerosol (SSA), comprising ~60–90%, by number, of supermicron particles, and organic aerosol (OA), comprising ~50–90%, by number, of submicron particles. Sulfate and nitrate were internally mixed within both SSA and OA particles, consistent with particle multiphase reactions during atmospheric transport. Within the Bering Strait, SSA and OA particles were more aged, with greater number fractions of particles containing sulfate and/or nitrate, compared to particles collected over the Chukchi Sea. This is indicative of greater pollution influence within the Bering Strait from coastal and inland sources, while the Chukchi Sea is primarily influenced by marine sources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of micro-sandwich structures via direct ink writing epoxy based cores

Sandwich structured (SS) composites demonstrate considerable flexural stiffness and high strength-to-weight ratios and can be tailored as functional materials. Historically they have been constrained to specific material types and geometry due to limitations in manufacturing methods. However, employing additive manufacturing (AM), specifically direct ink writing (DIW), can provide an alternative method for making SS composites with complex and controllable micro and mesostructures with multifunctionality targeted at desired mechanical, thermal, and electrical properties. DIW, an extrusion-based AM technique, uses a viscous and thixotropic ink with desired components that, once printed, is cured to obtain the final complex net shape parts. In this paper, a novel hybrid AM technique is employed to manufacture SS composite materials containing bisphenol A-based epoxy core and carbon fiber reinforced polymer (CFRP) face sheets that are fabricated via DIW and vacuum infusion process (VIP), respectfully. We demonstrate that the fabrication of these SS composites can be tailored from a thermosetting material, from which additives and/or various lattice structures can be manufactured to achieve enhanced and desirable mechanical integrity with functional properties. Surface topology and mechanical testing techniques are used to characterize the fabricated hybrid SS composites to study and assess mechanical stability. A rheo-kinetic cure model was developed for the core material to allow for additive manufacturing process requirements while ensuring complete cross-linking for the thermoset-based core material. Because of the ability to obtain relatively small core-thickness and controlled architecture, this method now allows for fabricating layered micro-sandwich structures for realizing further light-weighting in relevant applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Upcycling Real‐World Post‐Consumer Polyolefins Plastics Into Light Olefins Via Microwave‐Assisted Processing

The rapid accumulation of plastic waste, particularly post-consumer polyolefins (POs) pose severe environmental and economic challenges worldwide. Recycling of post-consumer POs remains inefficient due to difficulties in separating mixed plastics, complex additives compositions, and high processing costs, resulting in recycling rates of less than 9%. To address these critical issues, this study utilized an innovative microwave-assisted catalytic upcycling approach for the efficient upcycling of complex post-consumer POs mixtures into valuable light olefins. Using the microwave-assisted catalytic upcycling approach, gas yields reached up to 80 wt.% from post-consumer POs mixtures, accompanied by a high selectivity (>70 wt.%) toward valuable light olefins. The upcycling of POs under microwave conditions is fully invested, including additives in real-word plastics, mixtures of different POs, reusability of catalyst, and more. The microwave-assisted catalytic upcycling approach offers an efficient, scalable, and cost-effective solution for upcycling post-consumer plastic mixtures, thereby advancing the principles of a circular economy.

42 ENGINEERING↗
DOE OSTI2025

The effect of composition on helium bubble nucleation in complex concentrated alloys

Molecular dynamics simulations of helium implantation have been performed in the MoNbTaTi complex concentrated alloy (CCA) to determine the impact of composition on helium clustering and bubble nucleation. It was found that compositions with lower interstitial atomic volume resulted in smaller cluster sizes, higher helium-to-vacancy ratios, and larger migration barriers. As the atomic volume decreases, it is harder to accommodate additional helium in the lattice and for helium to diffuse between interstitial sites, resulting in smaller cluster sizes. In particular, increasing molybdenum directly correlated with a decreased interstitial atomic volume and increased migration barrier. Niobium exhibited the opposite trend, where more niobium in the material resulted in larger interstitial atomic volumes and cluster sizes but lower migration barriers. The atomic volume was determined to be an indicator of the susceptibility of the material to helium bubble growth and could potentially be used as a metric to screen compositions for resistance to helium damage. In this way, properties such as available interstitial volumes could be used to screen materials more rapidly given the vast compositional space of CCAs.

McCarthy, Megan Jeanne [Sandia National Laboratori↗
DOE OSTI2021

Framework for predicting the fractionation of complex liquid feeds via polymer membranes

The separation of complex liquid hydrocarbon mixtures was recently demonstrated using the glassy polymer SBAD-1, showing that small molecule fractionation is possible by such organic membrane materials. Here, in this work, we develop a framework that will enable workable predictions of permeate flux and composition in complex hydrocarbon liquids through intrinsically porous glassy polymers. The predictions are made by incorporating experimentally-derived unary sorption and diffusion parameters in a Maxwell-Stefan framework coupled with multicomponent sorption models and various distinct diffusion phenomena. Across the range of sorption and diffusion phenomena considered, both the conventional Flory-Huggins model and the proposed Langmuir + Flory-Huggins sorption model combined with a simple average guest diffusivity or a more complex free-volume theory-based transport resulted in the lowest prediction error for three chosen multicomponent separations. The proposed Maxwell-Stefan framework simply requires pure component transport parameters to allow a fast approximation of the separation of multicomponent liquid hydrocarbon feeds that can potentially be extended to more complex feeds such as crude oil fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Europa modifies Jupiter’s 1 plasma sheet

Jupiter's plasma sheet has been understood to be primarily composed of Io-genic sulfur and oxygen, along with protons at lower mass density. These ions move radially away from Jupiter, filling its magnetosphere. The material in the plasma sheet interacts with Europa, which is also a source of magnetospheric pickup ions, primarily hydrogen and oxygen. Juno's thermal plasma instrument JADE, the Jovian Auroral Distributions Experiment, has provided comprehensive in situ observations of the composition of Jupiter's plasma sheet ions with its Time-of-Flight mass-spectrometry capabilities. Here, we present observations of the magnetospheric composition in the Europa-Ganymede region of Jupiter's magnetosphere. We find material from Europa is intermittently present at comparable densities to Io-genic plasma. The intermittency of Europa-genic signatures suggests Europa's neutral oxygen toroidal cloud is more localized to Europa's vicinity than its hydrogen cloud. These observations reveal a more complex and compositionally diverse magnetosphere than previously thought.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Europa Modifies Jupiter's Plasma Sheet

Jupiter's plasma sheet has been understood to be primarily composed of Io-genic sulfur and oxygen, along with protons at lower mass density. These ions move radially away from Jupiter, filling its magnetosphere. The material in the plasma sheet interacts with Europa, which is also a source of magnetospheric pickup ions, primarily hydrogen and oxygen. Juno's thermal plasma instrument JADE, the Jovian Auroral Distributions Experiment, has provided comprehensive in situ observations of the composition of Jupiter's plasma sheet ions with its Time-of-Flight mass-spectrometry capabilities. Here, we present observations of the magnetospheric composition in the Europa-Ganymede region of Jupiter's magnetosphere. We find material from Europa is intermittently present at comparable densities to Io-genic plasma. The intermittency of Europa-genic signatures suggests Europa's neutral oxygen toroidal cloud is more localized to Europa's vicinity than its hydrogen cloud. These observations reveal a more complex and compositionally diverse magnetosphere than previously thought.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗