Cloud Computing at JPL Science Data Systems
Cloud computing is an approach and tool to support "Big Data".
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cloud computing is an approach and tool to support "Big Data".
Description of error correcting methods for use with digital data computers and apparatus for encoding and decoding digital data
The author has identified the following significant results. Land cover overlays and maps produced from LANDSAT are providing information on existing land use and resources throughout the 208 study area. The overlays are being used to delineate drainage areas of a predominant land cover type. Information on cover type is also being combined with other pertinent data to develop estimates of sediment and nutrients flows from the drainage area. The LANDSAT inventory of present land cover together with population projects is providing a basis for developing maps of anticipated land use patterns required to evaluate impact on water quality which may result from these patterns. Overlays of forest types were useful for defining wildlife habitat and vegetational resources in the region. LANDSAT data and computer assisted interpretation was found to be a rapid cost effective procedure for inventorying land cover on a regional basis. The entire 208 inventory which include acquisition of ground truth, LANDSAT tapes, computer processing, and production of overlays and coded tapes was completed within a period of 2 months at a cost of about 0.6 cents per acre, a significant improvement in time and cost over conventional photointerpretation and mapping techniques.
A method for modeling switching-converter power stages is developed, whose starting point is the unified state-space representation of the switched networks and whose end result is either a complete state-space description or its equivalent small-signal low-frequency linear circuit model. A new canonical circuit model is proposed, whose fixed topology contains all the essential input-output and control properties of any dc-to-dc switching converter, regardless of its detailed configuration, and by which different converters can be characterized in the form of a table conveniently stored in a computer data bank to provide a useful tool for computer aided design and optimization. The new canonical circuit model predicts that, in general, switching action introduces both zeros and poles into the duty ratio to output transfer function in addition to those from the effective filter network.
Aims, history and schedule of the Large Area Crop Inventory Experiment (LACIE) conducted by NASA, USDA and NOAA from 1974-1977 are described. The LACIE experiment designed to research, develop, apply and evaluate a technology to monitor wheat production in important regions throughout the world (U.S., Canada, USSR, Brasil) utilized quantitative multispectral data collected by Landsat in concert with current weather data and historical information. The experiment successfully exploited computer data and mathematical models to extract timely corp information. A follow-on activities for the early 1980's is planned focusing especially on the early warning of changes affecting production and quality of renewable resources and commodity production forecast.
Sophisticated telecommunications techniques are described that were used to acquire images of Uranus, its 14 moons and ten narrow rings darker than coal. The images, equal in quality to those transmitted from Saturn several years earlier despite the signal being weaker by 6 dB due to the increased distance, were received from Voyager 2 during its January 24, 1986 flyby of Uranus. Solutions to the problem of the weakening signal were found in modifications to Voyager's image processing system and NASA's ground tracking network. In April 1985, Voyager's prime flight data computer was reconfigured to accept only nonimaging science data, and its backup, only imaging data; the latter was reprogrammed to determine only arithmetic differences between adjacent pixel intensities rather than absolute intensities. By image compression, equivalent imaging information could be sent at lower bit rates. Instead of Golay coding, Reed-Solomon onboard encoding was used. These techniques gained the equivalent of 4-dB in imaging yield. Additional improvements were gained by using earth station antennas in pairs (the Parkes radio telescope and the Canberra ground station antenna). Moves under way to prepare for the Voyager encounter with Neptune in 1989 are described (using additional antennas and arrays, scaling up the Deep Space Network antennas from 64 m to 70 m, etc.) to assure almost Saturn-equivalent pictures despite a further 3.5-dB drop in signal strength.
Computer programming for digital data acquisition system - digital tape format, obtaining data in engineering units, and data analysis
IBM 7094 digital computer data loading routine for Fortran coded programs
The solution data computed from large scale simulations are sometimes too big for main memory, for local disks, and possibly even for a remote storage disk, creating tremendous processing time as well as technical difficulties in analyzing the data. The excessive storage demands a corresponding huge penalty in I/O time, rendering time and transmission time between different computer systems. In this paper, a multiresolution scheme is proposed to compress field simulation or experimental data without much loss of important information in the representation. Originally, the wavelet based multiresolution scheme was introduced in image processing, for the purposes of data compression and feature extraction. Unlike photographic image data which has rather simple settings, computational field simulation data needs more careful treatment in applying the multiresolution technique. While the image data sits on a regular spaced grid, the simulation data usually resides on a structured curvilinear grid or unstructured grid. In addition to the irregularity in grid spacing, the other difficulty is that the solutions consist of vectors instead of scalar values. The data characteristics demand more restrictive conditions. In general, the photographic images have very little inherent smoothness with discontinuities almost everywhere. On the other hand, the numerical solutions have smoothness almost everywhere and discontinuities in local areas (shock, vortices, and shear layers). The wavelet bases should be amenable to the solution of the problem at hand and applicable to constraints such as numerical accuracy and boundary conditions. In choosing a suitable wavelet basis for simulation data among a variety of wavelet families, the supercompact wavelets designed by Beam and Warming provide one of the most effective multiresolution schemes. Supercompact multi-wavelets retain the compactness of Haar wavelets, are piecewise polynomial and orthogonal, and can have arbitrary order of approximation. The advantages of the multiresolution algorithm are that no special treatment is required at the boundaries of the interval, and that the application to functions which are only piecewise continuous (internal boundaries) can be efficiently implemented. In this presentation, Beam's supercompact wavelets are generalized to higher dimensions using multidimensional scaling and wavelet functions rather than alternating the directions as in the 1D version. As a demonstration of actual 3D data compression, supercompact wavelet transforms are applied to a 3D data set for wing tip vortex flow solutions (2.5 million grid points). It is shown that high data compression ratio can be achieved (around 50:1 ratio) in both vector and scalar data set.
Future sensor systems will utilize massively parallel computing systems for rapid analysis of two-dimensional data. The Goddard Space Flight Center has an ongoing program to develop these systems. A single-instruction multiple data computer known as the Massively Parallel Processor (MPP) is being fabricated for NASA by the Goodyear Aerospace Corporation. This processor contains 16,384 processing elements arranged in a 128 x 128 array. The MPP will be capable of adding more than 6 billion 8-bit numbers per second. Multiplication of eight-bit numbers can occur at a rate of 2 billion per second. Delivery of the MPP to Goddard Space Flight Center is scheduled for 1983.
Circuit for checking two-line complementary-logic bits for single faults used as building block for self-checking memory interface for Hammingcoded data. Intended for such applications as fault-tolerant computing, data handling, and data transmission. Circuit performs exclusive-OR function. Many such circuits combined produce complete memory interface with both detection and correction abilities.
The principal challenges in providing effective deep space navigation, telecommunications, and information management architectures and designs for Mars exploration support are presented. The fundamental objectives are to provide the mission with the means to monitor and control mission elements, obtain science, navigation, and engineering data, compute state vectors and navigate, and to move these data efficiently and automatically between mission nodes for timely analysis and decision making. New requirements are summarized, and related issues and challenges including the robust connectivity for manned and robotic links, are identified. Enabling strategies are discussed, and candidate architectures and driving technologies are described.
This work focuses on evaluating machine learning methods and their applicability to the generation of an aerodynamic database, particularly for trajectory analysis of a capsule during entry, descent, and landing with a focus on uncertainty quantification. The source data to be used is the wind tunnel and computational data for the Integrated Design Assessment Team (IDAT) configuration of the Orion project, which has been publicly released. The methods used to generate the proposed databases are designed to naturally include a prediction interval, which will be evaluated both for their mean response as well as how well the prediction interval performs. These machine learning methods are compared to a traditionally generated database used by the Orion team as a baseline. It is found that while these machine learning methods perform well, the Orion database tends to still outperform them showing that engineering experience is still needed to make the best database possible. However, these methods still provide comparable results with significantly less effort.
This work focuses on evaluating machine learning methods and their applicability to the generation of an aerodynamic database, particularly for trajectory analysis of a capsule during entry, descent, and landing with a focus on uncertainty quantification. The source data to be used is the wind tunnel and computational data for the Integrated Design Assessment Team (IDAT) configuration of the Orion project, which has been publicly released. The methods used to generate the proposed databases are designed to naturally include a prediction interval, which will be evaluated both for their mean response as well as how well the prediction interval performs. These machine learning methods are compared to a traditionally generated database used by the Orion team as a baseline. It is found that while these machine learning methods perform well, the Orion database tends to still outperform them showing that engineering experience is still needed to make the best database possible. However, these methods still provide comparable results with significantly less effort.
The purpose of this paper is to validate an inviscid flow solution package based on a new unstructured grid methodology using experimental data on a wing/pylon/store configuration. The solution package consists of an advancing front unstructured grid generator, VGRID3D, and an efficient Euler equation solver, USM3D. Comparisons of computed data versus experimental data are made for two free-stream Mach numbers at five store locations relative to the wing. Both rigid body aerodynamics and mutual interference effects are explored. A very good agreement is observed between computed and wind tunnel data.
Digital computer-controlled data acquisition and recording system
This document describes the software designed to provide communication between control computers in the NASA Lewis Research Center Electrical Power System Testbed using MIL-STD-1553B. The software drivers are coded in the Ada programming language and were developed on a MSDOS-based computer workstation. The Electrical Power System (EPS) Testbed is a reduced-scale prototype space station electrical power system. The power system manages and distributes electrical power from the sources (batteries or photovoltaic arrays) to the end-user loads. The electrical system primary operates at 120 volts DC, and the secondary system operates at 28 volts DC. The devices which direct the flow of electrical power are controlled by a network of six control computers. Data and control messages are passed between the computers using the MIL-STD-1553B network. One of the computers, the Power Management Controller (PMC), controls the primary power distribution and another, the Load Management Controller (LMC), controls the secondary power distribution. Each of these computers communicates with two other computers which act as subsidiary controllers. These subsidiary controllers are, in turn, connected to the devices which directly control the flow of electrical power.
A computer technique for mapping mixed softwood and hardwood stands in multispectral satellite imagery of forest regions is described. The purpose of the technique is to obtain smoother resource maps useful in timber harvesting operations. The computer program relies on an algorithm which assesses the size and similarity of adjacent sections on satellite imagery (Landsat-1 data is used) and constructs, through an iteration of the basic algorithm, a more general map of timber mixtures, eliminating the mottled appearance of the raw imagery. Despite difficulties in the experimental analysis of a Texas forest, apparently due to relatively low resolution of the Landsat data, the computer classification approach outlined is suggested as a generally applicable method of creating serviceable maps from multispectral imagery.