SEARCH · Search NASA

Results for “computational reflection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1990

An assessment of the potential of continuous-wave ranging for measuring the distance to a highly reflective, infinite sheet

The feasibility of a continuous-wave, distance-measuring technique for measuring the distance from a spacecraft antenna to a highly ionized plasma surface is examined. The reflection coefficient angle is computed for several aperture models. It is concluded that aperture size and the presence of a nonablating dielectric cover over the antenna are critical factors.

Hearn, C. P.↗

NASA NTRS1990

Effects of islands in the Geosat footprint

The presence of land within a radar altimeter's footprint may contaminate its tracking performance and perturb the nadir oceanographic signal. A study has been performed which examines the effects of small mid-ocean islands on the Geosat tracker. The surface return waveforms, as well as the altimeter measurements, have been analyzed. Open-ocean waveforms have been compared with waveforms containing land reflections; they differ perceptibly. Computations could be performed, based on a combination of waveform data, altimeter signal strength, and sea surface heights, to detect contaminated sea-surface height values for subsequent editing.

Brooks, Ronald L.↗

NASA NTRS1992

Numerical simulation of unsteady flow in a hypersonic shock tunnel facility

This paper describes the computational work performed on the simulation of a 16-in shock-tunnel facility. The numerical problems encountered during the computation of these flows are discussed along with the validity of some approximations used, notably concerning the reduction of the problem into problems of smaller dimensionality. Quasi-1D simulations can be used to help design experiments, or to better understanding the characteristics of the facility. An application to the design of a nonintrusive diagnostic is shown. The multidimensional flow transients computed include the shock reflection at the end of the driven tube, the shock propagation down the nozzle, and the breaking of the main diaphragm.

Cambier, Jean-Luc↗

NASA NTRS1994

Making Precise Antenna Reflectors For Millimeter Wavelengths

In improved method of fabrication of precise, lightweight antenna reflectors for millimeter wavelengths, required precise contours of reflecting surfaces obtained by computer numberically controlled machining of surface layers bonded to lightweight, rigid structures. Achievable precision greater than that of older, more-expensive fabrication method involving multiple steps of low- and high-temperature molding, in which some accuracy lost at each step.

Sharp, G. Richard↗

NASA NTRS1993

A general theory of two- and three-dimensional rotational flow in subsonic and transonic turbomachines

This report represents a general theory applicable to axial, radial, and mixed flow turbomachines operating at subsonic and supersonic speeds with a finite number of blades of finite thickness. References reflect the evolution of computational methods used, from the inception of the theory in the 50's to the high-speed computer era of the 90's. Two kinds of relative stream surfaces, S(sub 1) and S(sub 2), are introduced for the purpose of obtaining a three-dimensional flow solution through the combination of two-dimensional flow solutions. Nonorthogonal curvilinear coordinates are used for the governing equations. Methods of computing transonic flow along S(sub 1) and S(sub 2) stream surfaces are given for special cases as well as for fully three-dimensional transonic flows. Procedures pertaining to the direct solutions and inverse solutions are presented. Information on shock wave locations and shapes needed for computations are discussed. Experimental data from a Deutsche Forschungs- und Versuchsanstalt fur Luft- und Raumfahrt e.V. (DFVLR) rotor and from a Chinese Academy of Sciences (CAS) transonic compressor rotor are compared with the computed flow properties.

Wu, Chung-Hua↗

NASA NTRS1994

Measuring rainwater content by radar using propagation differential phase shift

While radars measure several quantities closely coupled to the rainfall rate, for frequencies less than 15 GHz, estimates of the rainwater content W are traditionally computed from the radar reflectivity factor Z or the rate of attenuation A--quantities only weakly related to W. Consequently, instantaneous point estimates of W using Z and A are often erroneous. A more natural, alternative parameter for estimating W at these frequencies is the specific polarization propagation differential phase shift phi(sub DP), which is a measure of the change in the difference between phases of vertically (V) and horizontally (H) polarized waves with increasing distance from a radar. It is now well known that W is nearly linearly related to phi(sub DP) divided by (1 - reversed R), where reversed R is the mass-weighted mean axis ratio of the raindrops. Unfortunately, such relations are not widely used in part because measurements of phi(sub DP) are scarce but also because one must determine reversed R. In this work it is shown that this parameter can be estimated using the differential reflectivity (Z(sub H)/Z(sub V) at 3 GHz. An alternative technique is suggested for higher frequencies when the differential reflectivity becomes degraded by attenuation. While theory indicates that it should be possible using phi(sub DP) to estimate W quite accurately, measurement errors increase the uncertainty to +/- 18%-35% depending on reversed R. While far from ideal, it appears that these estimates are likely to be considerably more accurate than those deduced using currently available methods.

Jameson, A. R.↗

NASA NTRS1996

Computing Radiation From Axisymmetric Waveguide Feed Horns

Hybrid finite-element method developed for computing radiation patterns and reflection coefficients of axisymmetric waveguide feed horns that include dielectric bodies like rods and radomes. Dielectric inhomogeneities introduced by such bodies and even anisotropies of some dielectric materials pose no special problem in method because requisite dielectric properties readily incorporated into finite elements used to model bodies.

Chinn, Gilbert C.↗

NASA NTRS1995

The power of pezonomics

This reflection of human-computer interface and its requirements as virtual technology is advanced, proposes a new term: 'Pezonomics'. The term replaces the term ergonomics ('the law of work') with a definition pointing to 'the law of play.' The necessity of this term, the author reasons, comes from the need to 'capture the essence of play and calibrate our computer systems to its cadences.' Pezonomics will ensure that artificial environments, in particular virtual reality, are user friendly.

Orr, Joel N.↗

NASA NTRS1990

Removing spurious reflections from CFD solutions by using the Complex Cepstrum

The Complex Cepstrum is shown to remove spurious reflections from artificial boundaries in computational fluid dynamic (CFD) solutions. First, the Complex Cepstrum theory is presented. A model time sequence consisting of a direct signal and reflections is analyzed theoretically with the Complex Cepstrum, and it is shown that the direct signal uncontaminated by reflections may be recovered in the time domain. Next, the Complex Cepstrum is applied to one- and three-dimensional CFD solutions, and spurious reflections from the boundary conditions are removed. By eliminating spurious reflections introduced by artificial boundary conditions, the applicability of CFD methods to aeroacoustic problems is greatly enhanced.

Meadows, Kristine R.↗

NASA NTRS2016

The Effects of High Density on the X-ray Spectrum Reflected from Accretion Discs Around Black Holes

Current models of the spectrum of X-rays reflected from accretion discs around black holes and other compact objects are commonly calculated assuming that the density of the disc atmosphere is constant within several Thomson depths from the irradiated surface. An important simplifying assumption of these models is that the ionization structure of the gas is completely specified by a single, fixed value of the ionization parameter (xi), which is the ratio of the incident flux to the gas density. The density is typically fixed at n(sub e) = 10(exp 15) per cu cm. Motivated by observations, we consider higher densities in the calculation of the reflected spectrum. We show by computing model spectra for n(sub e) approximately greater than 10(exp 17) per cu cm that high-density effects significantly modify reflection spectra. The main effect is to boost the thermal continuum at energies 2 approximately less than keV. We discuss the implications of these results for interpreting observations of both active galactic nuclei and black hole binaries. We also discuss the limitations of our models imposed by the quality of the atomic data currently available.

accretion↗

NASA NTRS1970

A rough earth scattering model for multipath prediction

The most important phenomena to be considered in a model of radio wave communication between earth satellites are scattering from the surface of the earth. A model is derived and implemented on a computer to predict the field received after reflection from a rough, spherical earth. The scattering integrals are computed numerically; the domain of integration is the appropriate region on the surface of the earth. Calculations have been performed at VHF frequencies and for terrain which could be described as marshy land. Rough surface scattering calculations must be performed over a spherical earth when satellites are involved. There is a definite dependence on the values of the roughness, and the correlation length.

Page, L. J.↗

NASA NTRS1988

Reflectances of glaciers as calculated using Landsat-5 Thematic Mapper data

Landsat-5 digital numbers have been used to compute the at-satellite planetary reflectance on spectrally similar zones on the Meares and Schwanda glaciers in Alaska and the Grossglockner glacier group in Austria. The patterns of TM-derived reflectances in the ablation areas of the Grossglockner glacier group and the Meares Glacier compare favorably with published reflectance curves measured on the surface of glacier ice, though the surface reflectance of snow-covered ice is higher than the Landsat-derived reflectance for the glaciers studied. The accuracy of the at-satellite planetary reflectances is shown to be affected by topographic and atmospheric effects and by the anisotropic nature of snow reflectance.

Hall, Dorothy K.↗

NASA NTRS1984

Stratocumulus cloud field reflected fluxes - The effect of cloud shape

The reflected fluxes of stratocumulus cloud fields are calculated as a function of sky cover aspect ratio and cloud shape. In order to obtain a better fit with general circulation models (GCMs), cloud liquid water volume values were kept invariant relative to cloud shape. On the basis of the required accuracy of the Earth Radiation Budget Experiment (ERBE), an order of magnitude value of 10 W per sq m was used to estimate the difference between plane-parallel and broken cloudiness reflected fluxes. An empirical relationship for effective cloud cover at a solar zenith angle of 60 deg is derived. The relationship allows for the accurate computation of broken cloud field reflected fluxes using plane-parallel calculations. It is predicted that more accurate estimates of broken cloud field radiative properties may be possible in the future.

Welch, R. M.↗

NASA NTRS1971

Automated geologic mapping using rock reflectances.

Investigation of the feasibility of preparing geologic maps automatically through computer processing of calibrated narrow-band visible and near IR reflectivity data collected with a 12-channel scanner. Five procedures were followed in the computer analysis of the radiances recorded as voltages on analog magnetic tape. Three recognition maps have been generated iteratively using a progressively more complex classification scheme. The overall accuracy of the first recognition map was 80%, but the discrimination of the limestone and dolomite was only 50-60%. All three maps are very accurate outcrop maps. The results demonstrate the feasibility of automated geologic mapping in this relatively simple setting.

Watson, R. D.↗

NASA NTRS1974

Electromagnetic diffraction efficiencies for plane reflection diffraction gratings

The theory and computer programs, based on electromagnetic theory, for the analysis and design of echelle gratings were developed. The gratings are designed for instruments that operate in the ultraviolet portion of the spectrum. The theory was developed so that the resulting computer programs will be able to analyze deep (up to 30 wavelengths) gratings by including as many as 100 real or homogeneous diffraction orders. The program calculates the complex amplitude coefficient for each of the diffracted orders. A check on the numerical method used to solve the integral equations is provided by a conservation of energy calculation.

Marathay, A. S.↗

NASA NTRS1997

Application of PML Absorbing Boundary Conditions to the Benchmark Problems of Computational Aeroacoustics

Accurate numerical non-reflecting boundary conditions are important in all the proposed benchmark problems of the Second Workshop. Recently, a new absorbing boundary condition has been developed using Perfectly Matched Layer (PML) equations for the Euler equations. In this approach, a region with a width of a few grid points is introduced adjacent to the non-reflecting boundaries. In the added region, Perfectly Matched Layer equations are constructed and applied so that the out-going waves are absorbed inside the layer with little reflection to the interior domain. It will be demonstrated in the present paper that the proposed absorbing boundary condition is quite general and versatile, applicable to radiation boundaries as well as inflow and outflow boundaries. It is also easy to implement. The emphasis of the paper will be on the application of the PML absorbing boundary condition to problems in Categories 1, 2, and 3. In Category 1, solutions of problems 1 and 2 are presented. Both problems are solved using a multi-domain polar grid system. Perfectly Matched Layer equations for a circular boundary are constructed and their effectiveness assessed. In Category 2, solutions of problem 2 are presented. Here, in addition to the radiation boundary conditions at the far field in the axisymmetric coordinate system, the inflow boundary condition at the duct inlet is also dealt with using the proposed Perfectly Match Layer equations. At the inlet, a PML domain is introduced in which the incident duct mode is simulated while the waves reflected from the open end of the duct are absorbed at the same time. In Category 3, solutions of all three problems are presented. Again, the PML absorbing boundary condition is used at the inflow boundary so that the incoming vorticity wave is simulated while the outgoing acoustic waves are absorbed with very little numerical reflection. All the problems are solved using central difference schemes for spatial discretizations and the optimized Low-Dissipation and Low-Dispersion Runge-Kutta scheme for the time integration. Issues of numerical accuracy and efficiency are also addressed.

Hu, Fang Q.↗

NASA NTRS1975

Optical and infrared transfer function of the GEOS 3 retroreflector array

The transfer function of the retroreflector array carried by the Geos 3 satellite was computed at three wavelength: 5300, 6943, and 10600 A. The range correction is given for extrapolating laser range measurements to the center of gravity of the satellite. The reflectivity of the array was computed for estimating laser-echo signal strengths.

Arnold, D. A.↗

NASA NTRS1979

Calculation of the three-dimensional flow field in supersonic inlets at angle of attack using a bicharacteristic method with discrete shock wave fitting

An analysis is presented for calculating the flow field in supersonic mixed-compression aircraft inlets operating at angle of attack. The flow field is computed by a steady three-dimensional bicharacteristic method. The bow shock wave and the reflected internal shock wave system are computed by a three-dimensional discrete shock wave fitting procedure. Viscous and thermal diffusion may be included as source terms in the bicharacteristic method. A production type computer program capable of determining the flow field in a variety of axisymmetric mixed-compression supersonic inlets is available. The results of the present analysis agree well with those produced by the two-dimensional method of characteristics when axisymmetric flow fields are computed. For three-dimensional flow fields, the results of the present analysis agree well with experimental data except in regions of high viscous interaction and boundary layer removal. The present analysis does not compute the boundary layer, nor does it account for boundary layer bleed.

Vadyak, J.↗