Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuity measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Quiet-time increases of low-energy electrons - The Jovian origin

With a detector on board the OGO-5 satellite, the flux and energy spectrum of electrons in the 10-200-MeV range has been continuously measured from 1968 to 1971. Sudden increases in intensity by factors of up to 300% have been observed during solar quiet times. It is shown that these increases are nearly independent of energy up to about 25 MeV and disappear rapidly above that energy. The frequency of the increases peaks every 13 months at a time following the crossing by earth of the interplanetary magnetic-field line which passes the vicinity of the planet Jupiter. Most of the increases occur in a period of 3 to 5 months following this crossing and often appear to be 27 days apart. A Jovian origin for these electrons and their mode of transport to the inner solar system are discussed.

Lheureux, J.↗

Study of igniter design and applications to low smoke solid rockets

A simple analysis of igniter design is described which is sufficiently general to be applicable to any 'basket'-type housing containing one or more charges. The gas equation of state is used in conjunction with the experimentally determined propellant burning-rate law to predict the pressure-time histories in the igniter housing and the rocket motor. Typical numerical results are presented for three cases which represent three experimental conditions tested in a project on low-smoke motors where the requirements on the exhaust were sufficiently stringent to preclude condensible matter from the igniter. Pressure was measured continuously in time at two locations in the igniter housing and at the head end of the motor case. The agreement between theoretical and experimental results is felt to be encouraging considering the complexity of the problem and the many simplifications in the analysis.

Ramohalli, K.↗

Compressor seal rub energetics study

The rub mechanics of compressor abradable blade tip seals at simulated engine conditions were investigated. Twelve statistically planned, instrumented rub tests were conducted with titanium blades and Feltmetal fibermetal rubstrips. The tests were conducted with single stationary blades rubbing against seal material bonded to rotating test disks. The instantaneous rub torque, speed, incursion rate and blade temperatures were continuously measured and recorded. Basic rub parameters (incursion rate, rub depth, abradable density, blade thickness and rub velocity) were varied to determine the effects on rub energy and heat split between the blade, rubstrip surface and rub debris. The test data was reduced, energies were determined and statistical analyses were completed to determine the primary and interactive effects. Wear surface morphology, profile measurements and metallographic analysis were used to determine wear, glazing, melting and material transfer. The rub energies for these tests were most significantly affected by the incursion rate while rub velocity and blade thickness were of secondary importance. The ratios of blade wear to seal wear were representative of those experienced in engine operation of these seal system materials.

Laverty, W. F.↗

Temporal variations in atmospheric water vapor and aerosol optical depth determined by remote sensing

By automatically tracking the sun, a four-channel solar radiometer was used to continuously measure optical depth and atmospheric water vapor. The design of this simple autotracking solar radiometer is presented. A technique for calculating the precipitable water from the ratio of a water band to a nearby nonabsorbing band is discussed. Studies of the temporal variability of precipitable water and atmospheric optical depth at 0.610, 0.8730 and 1.04 microns are presented. There was good correlation between the optical depth measured using the autotracker and visibility determined from National Weather Service Station data. However, much more temporal structure was evident in the autotracker data than in the visibility data. Cirrus clouds caused large changes in optical depth over short time periods. They appear to be the largest deleterious atmospheric effect over agricultural areas that are remote from urban pollution sources.

Pitts, D. E.↗

The effects of polar stratwarms on the winds at the mesopause level in mid latitudes

The continuous measurement of the wind profile over the 80 to 100 km region by means of radio reflections from meteor trails provides data which can be correlated with stratospheric temperature changes inferred from satellite radiance data. The very preliminary results presented show a tendency for stratospheric warming events to produce dramatic changes in the circulation in the neighborhood of the mesopause at 34 deg N. The mean zonal wind over the height range 80 to 100 km above Atlanta for the period November, 1974 through February, 1975 is presented in a graph.

Roper, R. G.↗

Effects of magnification and visual accommodation on aimpoint estimation in simulated landings with real and virtual image displays

Twenty professional pilots observed a computer-generated airport scene during simulated autopilot-coupled night landing approaches and at two points (20 sec and 10 sec before touchdown) judged whether the airplane would undershoot or overshoot the aimpoint. Visual accommodation was continuously measured using an automatic infrared optometer. Experimental variables included approach slope angle, display magnification, visual focus demand (using ophthalmic lenses), and presentation of the display as either a real (direct view) or a virtual (collimated) image. Aimpoint judgments shifted predictably with actual approach slope and display magnification. Both pilot judgments and measured accommodation interacted with focus demand with real-image displays but not with virtual-image displays. With either type of display, measured accommodation lagged far behind focus demand and was reliably less responsive to the virtual images. Pilot judgments shifted dramatically from an overwhelming perceived-overshoot bias 20 sec before touchdown to a reliable undershoot bias 10 sec later.

Randle, R. J.↗

HCMM satellite follow-on investigation no. 25. Soil moisture and heat budget evalution in selected European zones of agricultural and environmental interest (TELLUS project)

A simple procedure to evaluate actual evaporation was derived by linearizing the surface energy balance equation, using Taylor's expansion. The original multidimensional hypersurface could be reduced to a linear relationship between evaporation and surface temperature or to a surface relationship involving evaporation, surface temperature and albedo. This procedure permits a rapid sensitivity analysis of the surface energy balance equation as well as a speedy mapping of evaporation from remotely sensed surface temperatures and albedo. Comparison with experimental data yielded promising results. The validity of evapotranspiration and soil moisture models in semiarid conditions was tested. Wheat was the crop chosen for a continuous measurement campaign made in the south of Italy. Radiometric, micrometeorologic, agronomic and soil data were collected for processing and interpretation.

Source record↗

Improved definition of crustal anomalies for Magsat data

Final editing and reduction of the equatorial ground observatory data set was completed. Plots of delineation, and the vertical and horizontal components of the time varying field were generated from these data. Appropriate baselines were derived and deviations from these levels can be used as a continuous measure of the external variations at ground level in the sub-auroral zones. They may also be useful as quantitative measures of the intensity of external field activity. Other data sets assembled for dissemination include (1) Kp and Ap - the planetary magnetic indexes; (2) the international magnetic character indexes-Cp; (3) compilations of magnetic storm sudden commencements; (4) time of interplanetary magnetic sector changes; and (5) Dst - the storm disturbance measure. Fine attitude component data with its increased pointing resolution is reducing residuals by an order of magnitude.

Source record↗

Remote control canard missile with a free-rolling tail brake torque system

An experimental wind-tunnel investigation has been conducted at supersonic Mach numbers to determine the static aerodynamic characteristics of a cruciform canard-controlled missile with fixed and free-rolling tail-fin afterbodies. Mechanical coupling effects of the free-rolling tail afterbody were investigated using an electronic/electromagnetic brake system that provides arbitrary tail-fin brake torques with continuous measurements of tail-to-mainframe torque and tail-roll rate. Results are summarized to show the effects of fixed and free-rolling tail-fin afterbodies that include simulated measured bearing friction torques on the longitudinal and lateral-directional aerodynamic characteristics.

Blair, A. B., Jr.↗

The role of near surface outflow in maintaining convective activity

Continuous measurements of horizontal velocity, temperature and humidity at the surface over a dense network of stations were used to examine the behavior, at the surface, of a large number of convective storms. Feedback between storm outflow at the surface and the generation of convective cells is demonstrated. The outflow is shown in the surface divergence fields once rain begins, with characteristics common to storms in distinctly different meteorological environments, such as summertime Florida and Illinois. This commencement precedes the occurence of rainfall and radar echo in the location of the cell by some tens of minutes up to more than 100 mins. Given surface measurements with a spacing of no more than 10 km, the direction of propagation, timing of the future occurence of rainfall and the intensity of the rainfall generated in the cell can be determined.

Garstang, M.↗

Using CAD/CAM to improve productivity - The IPAD approach

Progress in designing and implementing CAD/CAM systems as a result of the NASA Integrated Programs for Aerospace-Vehicle Design is discussed. Essential software packages have been identified as executive, data management, general user, and geometry and graphics software. Data communication, as a means to integrate data over a network of computers of different vendors, provides data management with the capability of meeting design and manufacturing requirements of the vendors. Geometry software is dependent on developmental success with solid geometry software, which is necessary for continual measurements of, for example, a block of metal while it is being machined. Applications in the aerospace industry, such as for design, analysis, tooling, testing, quality control, etc., are outlined.

Fulton, R. E.↗

Geostationary operational environmental satellite /GOES/ - A multifunctional satellite

The GOES satellites are multifunctional satellites whose primary function is to provide continuous measurements of the earth's surface and atmosphere from two geostationary orbit locations: 75 deg W and 135 deg W. This objective is accomplished with the visible infrared spin scan radiometer Atmospheric Sounder (VAS), and the Space Environment Monitor (SEM), which includes three instruments: a magnetometer, solar X-ray sensor, and an energetic particle sensor, which monitor the near earth space environment. The satellite's communication system provides several user oriented functions, including: (1) Transmission of VAS data; (2) Transmission of SEM data; (3) Transponder capabilities for stretched VAS (SVAS) data, weather facsimile (WEFAX) data, and trilateration signals; (4) transponder capabilities for data collection platform interrogation and data collection platform reply.

Mallette, L. A.↗

The use of the PUCOT for elastic modulus measurements on intermetallics at high temperatures

The piezoelectric ultrasonic composite oscillator technique (PUCOT) is being applied to measure the elastic constants of the aluminides in the temperature ranges 300 to 1700 K (CoAl and NiAl) and 300 to 1500 K (FeAl). The PUCOT consists of piezoelectric quartz drive and gauge crystals to excite longitudinal or torsional ultrasonic (80 kHz) resonant stress waves in the specimen and alumina spacer rod of appropriate resonant lengths. The resonant system is driven by a closed loop oscillator which maintains a constant gauge voltage and hence constant strain amplitude in the specimen. While the specimen is heated at 20 K/h the resonant period is measured continuously. The elastic moduli are calculated from these values of the resonant period and accurate determinations of specimen length. The technique is described and some results given.

Wolfenden, A.↗

Phytoplankton pigment concentrations in the Middle Atlantic Bight - Comparison of ship determinations and CZCS estimates

The processing algorithms used for relating the apparent color of the ocean observed with the Coastal-Zone Color Scanner on Nimbus-7 to the concentration of phytoplankton pigments (principally the pigment responsible for photosynthesis, chlorophyll-a) are developed and discussed in detail. These algorithms are applied to the shelf and slope waters of the Middle Atlantic Bight and also to Sargasso Sea waters. In all, four images are examined, and the resulting pigment concentrations are compared to continuous measurements made along ship tracks. The results suggest that over the 0.08-1.5 mg/cu m range, the error in the retrieved pigment concentration is of the order of 30-40% for a variety of atmospheric turbidities. In three direct comparisons between ship-measured and satellite-retrieved values of the water-leaving radiance, the atmospheric correction algorithm retrieved the water-leaving radiance with an average error of about 10%. This atmospheric correction algorithm does not require any surface measurements for its application.

Gordon, H. R.↗

The relative abundance of 3He(++) in the solar wind

Continuous measurements of solar wind 3He(++) and 4He(++) were made covering a full range of solar wind conditions. The average flux ratio derived from these data is 2310 + or - 50, in excellent agreement with the Apollo foil measurements. A probable correlation between average flux ratio and solar activity was found; however, an examination of the data during periods of 3He(++)-rich solar flares shows no detectable increase in 3He(++) in the solar wind.

Coplan, M. A.↗

Lightning mapping sensor study

A technology assessment to determine how a world-wide, continuous measurement of lightning could be achieved from a geostationary platform is provided. Various approaches to the detector sensors are presented. It was first determined that any existing detector chips would require some degree of modification in order to meet the lightning mapper sensor requirements. The elements of the system were then analyzed, categorized, and graded for study emphasis. The recommended approach for the lightning mapper sensor is to develop a monolithic array in which each detector cell has circuitry that implements a two-step photon-collecting method for a very high dynamic range with good measurement accuracy. The efficiency of the array is compatible with the use of a conventional refractive optics design having an aperture in the neighborhood of 7 to 10 cm.

Norwood, V.↗

Lightning mapper sensor design study

World-wide continuous measurement of lightning location, intensity, and time during both day and night is to be provided by the Lightning Mapper (LITMAP) instrument. A technology assessment to determine if the LITMAP requirements can be met using existing sensor and electronic technologies is presented. The baseline concept discussed in this report is a compromise among a number of opposing requirements (e.g., ground resolution versus array size; large field of view versus narrow bandpass filter). The concept provides coverage for more than 80 percent of the lightning events as based on recent above-cloud NASA/U2 lightning measurements.

Eaton, L. R.↗

Linear and circular polarization of the cosmic background radiation

New data which consist of continued measurements of the linear polarization of the cosmic background radiation as well as the first measurement of the circular polarization are examined. Eleven declinations have been surveyed for linear polarization and one declination for circular polarization, all at 9 mm wavelength. No evidence is found for either a significant linear or circular component with statistical errors on the linear component of 20-60 microK for various models. For linear polarization, a 95 percent confidence level limit of 0.1 mK (0.00003) for an axisymmetric anisotropic model is achieved, while for spherical harmonics through third order, a corresponding limit of 0.2 mK is achieved. For a declination of 37 deg, a limit of 12 mK is placed on the time-varying component and 20 mK on the dc component of the circular polarization at the 95 percent confidence level. At 37 percent declination, the sensitivity per beam patch (7 deg) is 0.2 mK.

Lubin, P.↗