Search NASA⌕ Search

SEARCH · Search NASA

Results for “coordinates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

EUREICA: Efficient UltRa Endpoint IoT-enabled Coordinated Architecture

The electricity grid has evolved from a physical system to a cyber-physical system with digital devices that perform measurement, control, communication, computation, and actuation. The increased penetration of distributed energy resources (DERs) that include renewable generation, flexible loads, and storage provides extraordinary opportunities for improvements in efficiency and sustainability. However, they can introduce new vulnerabilities in the form of cyberattacks, which can cause significant challenges in ensuring grid resilience. The purpose of this project was to develop a framework ((Efficient, Ultra-REsilient, IoT-Coordinated Assets, or EUREICA)for achieving grid resilience through suitably coordinated assets including a network of Internet of Things (IoT) devices, and a local electricity market (LEM) to identify trustable assets and carry out this coordination. Situational Awareness (SA) of locally available DERs with the ability to inject power or reduce consumption is enabled by the market, together with a monitoring procedure for their trustability and commitment. Experiments conducted during this project demonstrated that, with this SA, a variety of cyberattacks can be mitigated using local trustable resources without stressing the bulk grid. The demonstrations were carried out using a variety of high-fidelity co-simulation platforms, real-time hardware-in-the-loop validation, and a utility-friendly simulator.

14 SOLAR ENERGY↗
DOE OSTI2026

Mitigating Data Center Impact on Grid Stability: A Coordinated Control Strategy Using Verrus StabiliGrid Architecture

Large data centers, which now represent a significant and growing share of the total U.S. grid load, can inadvertently destabilize the electrical grid when they disconnect simultaneously during brief voltage disturbances. The July 10, 2024, Eastern Interconnection incident, in which a sub-100-millisecond transmission fault triggered the cascading loss of approximately 1,500 MW of data center load, illustrates this vulnerability. While commercial battery energy storage systems (BESS) deployed in data centers provide device-level fault ride-through per IEEE 1547, they lack coordination with facility protection logic and uninterruptible power supplies (UPS), limiting their effectiveness as grid-stabilizing assets. This report presents the Verrus StabiliGrid architecture, a coordinated control framework that integrates BESS, UPS, and point-of-interconnection (POI) protection settings to enable data centers to ride through both undervoltage and overvoltage grid contingencies without disconnecting. The four-step strategy encompasses: (1) high-resolution power quality monitoring to detect the grid state during events such as undervoltage, overvoltage, underfrequency, and overfrequency; (2) POI protection settings that allow for extended ride-through and grid-connected operation during grid contingencies; (3) grid state-driven autonomous dispatch of assets to improve grid resilience by reducing power draw during undervoltage or absorbing more power during overvoltage events; and (4) coordinated post-recovery dispatch of data center assets to restore firm load to pre-contingency levels. Validated through controller-hardware-in-the-loop (C-HIL) simulations at the National Laboratory of the Rockies, results show grid import restoration to pre-fault levels within 100 milliseconds of voltage recovery. This work advances the ability of data centers to transition from passive, disturbance-sensitive loads to active participants in grid stability, a capability increasingly required by emerging NERC and ERCOT regulatory frameworks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1970

Empirical analytic transformations between geographic and corrected geomagnetic coordinates

Based upon a mathematical model of contours of constant corrected geomagnetic latitude in a polar projection of geographic coordinates, analytic equations are developed for converting geographic coordinates to corrected geomagnetic coordinates and vice versa. The equations were programmed for use on a small computer. This treatment is restricted to the Northern Hemisphere.

Comfort, R. H.↗
NASA NTRS1972

Coordinate perturbation and multiple scale in gasdynamics.

A simple way of applying the coordinate perturbation technique is developed which bypasses the usual transformations of the equations to perturbed coordinates, and which provides the appropriate coordinate stretching by simple algebraic manipulations on the nonuniformly valid expansion obtained by a straightforward expansion from the original equations. Interesting results are obtained by applying the procedure to two gasdynamical problems. In the first, the flowfield around a supersonic two-dimensional wing is determined up to third order, including a uniformly valid representation of the front shock shape. The second concerns the oscillations in a closed tube following an arbitrary initial disturbance, both when the two ends are closed, and when one of the two ends contains an oscillating piston.

Crocco, L.↗
NASA NTRS1972

Coordinate transformation by minimizing correlations between parameters

This investigation was to determine the transformation parameters (three rotations, three translations and a scale factor) between two Cartesian coordinate systems from sets of coordinates given in both systems. The objective was the determination of well separated transformation parameters with reduced correlations between each other, a problem especially relevant when the sets of coordinates are not well distributed. The above objective is achieved by preliminarily determining the three rotational parameters and the scale factor from the respective direction cosines and chord distances (these being independent of the translation parameters) between the common points, and then computing all the seven parameters from a solution in which the rotations and the scale factor are entered as weighted constraints according to their variances and covariances obtained in the preliminary solutions. Numerical tests involving two geodetic reference systems were performed to evaluate the effectiveness of this approach.

Kumar, M.↗
NASA NTRS1973

Coordinated adaptive washout for motion simulators.

This paper introduces a new method of providing motion cues to a moving base six-degree-of-freedom flight simulator utilizing nonlinear filters. Coordinated adaptive filters, used to coordinate translational and rotational motion, are derived based on the method of continuous steepest descent, and the basic concept of the digital controllers used for the uncoordinated heave and yaw cues is also presented. The coordinated adaptive washout method is illustrated by an application in a six-degree-of-freedom fixed-base environment.

Parrish, R. V.↗
NASA NTRS1974

Coordinate transformations for studies of interactions between interplanetary and geomagnetic fields

A graphical procedure is provided for performing coordinate transformations between the geocentric-solar-equatorial, geocentric-solar-ecliptic and geocentric-solar-magnetospheric coordinate systems. The procedure is designed to facilitate intercomparison of previous studies of interactions between interplanetary and geomagnetic fields that made use of these coordinate systems. The interaction in the geocentric-solar-magnetosphere system has been shown to give the most consistent results.

Burch, J. L.↗
NASA NTRS1974

Determination of selenographic coordinates of lunar surface points from single pictures obtained from Zond 6

Pictures of the lunar surface with an image of practically the entire lunar limb were obtained from the Zond 6 spacecraft. During the time of exposure, the entire lunar surface covered by these photographs was illuminated by the sun. Such single pictures were used to find the external orientation elements and selenographic coordinates of the photographed lunar surface points. The selenographic coordinate system was specified by the Goloseyev catalog and was realized by points of this catalog identified on the pictures and termed reference points. Craters located on the invisible side of the moon and also other points of the Goloseyev catalog, which could be used as control points, were taken as the points being determined. The technique used to compute the selenographic coordinates of the points is outlined.

Ziman, Y. L.↗
NASA NTRS1975

Station coordinates in the standard earth 3 system and radiation-pressure perturbations from ISAGEX camera data

Simultaneous and individual camera observations of GEOS 1, GEOS 2, Pageos, and Midas 4 obtained during the International Satellite Geodesy Experiment are utilized to determine station coordinates. The Smithsonian Astrophysical Observatory Standard Earth III system of coordinates is used to tie the geometrical network to a geocentric system and as a reference for calculating satellite orbits. A solution for coordinates combining geometrical and dynamical methods is obtained, and a comparison between the solutions and terrestrial data is made. The radiation-pressure and earth-albedo perturbations for Pageos are very large, and Pageos' orbits are used to evaluate the analytical treatment of these perturbations. Residual effects, which are probably of interest to aeronomists, remain in the Pageos orbits.

Gaposchkin, E. M.↗
NASA NTRS1975

Reformulation of the relativistic conversion between coordinate time and atomic time

The relativistic conversion between coordinate time and atomic time is reformulated to allow simpler time calculations relating analysis in solar system barycentric coordinates (using coordinate time) with earth-fixed observations (measuring 'earth-bound' proper time or atomic time). After an interpretation in terms of relatively well-known concepts, this simplified formulation, which has a rate accuracy of about 10 to the minus 15th, is used to explain the conventions required in the synchronization of a worldwide clock network and to analyze two synchronization techniques - portable clocks and radio interferometry. Finally, pertinent experimental tests of relativity are briefly discussed in terms of the reformulated time conversion.

Thomas, J. B.↗
NASA NTRS1975

Numerical solutions of the unsteady Navier-Stokes equations for arbitrary bodies using boundary-fitted curvilinear coordinates

A method of automatic body-fitted curvilinear coordinate generation is described and used to construct a finite-difference solution of the full incompressible time-dependent Navier-Stokes equations for the unsteady laminar viscous flow arbitrary two-dimensional airfoils or any other two-dimensional body. A method of controlling the spacing of the coordinate lines encircling the body is developed in order to treat high Reynolds number flows, since the coordinate lines must concentrate near the surface to a greater degree as the Reynolds number increases. Multiple airfoils and submerged hydrofoils are treated as illustrative examples. The solution shows good agreement with the Blasius boundary layer solution for the flow past a semi-infinite flat plate.

Thompson, J. F.↗
NASA NTRS1975

Nature of the requirements for reference coordinate systems /Review paper/

The current need for more precisely defined reference coordinate systems arises for geodynamics because the earth can certainly not be treated as a rigid body when measurement uncertainties reach the few-centimeter scale or its angular equivalent. At least two coordinate systems seem to be required. The first is a system defined in space relative to appropriate astronomical objects, suitable for ultimately expressing the dynamical equations of motion for the earth. The second coordinate system must be associated with the nonrigid earth in some well defined way so that the rotational motions of the whole earth are represented by the transformation parameters relating the earth system to the space-inertial system. The earth system should be defined so that the dynamical equations for relative motions of the various internal mechanical components of the earth and accurate measurements of these motions are conveniently expressed in this system.

Lundquist, C. A.↗
NASA NTRS1975

Coordinate systems in lunar ranging

Three distinct coordinate systems are required in the interpretation of the lunar range observations: a celestial frame and two-body-fixed frames. However, there is no coordinate system that is uniquely, or even preferentially, related to the observations themselves. Effectively, one specifies the coordinate systems by the procedures used in data reduction and parameter improvement. Each of the three systems affects the others in some way, and internal inconsistencies are quite possible. The discussion examines some of the more important aspects of this problem.

Mulholland, J. D.↗
NASA NTRS1975

On the periodic coordination of linear stochastic systems

The decentralized stochastic control of a linear dynamic system consisting of several subsystems is considered. A two-level approach is used by the introduction of a coordinator who collects measurements from the local controllers periodically and in return transmits coordinating parameters. Two types of coordination are considered: open-loop feedback and closed loop. The resulting control laws are found to be intuitively attractive.

Chong, C.-Y.↗
NASA NTRS1976

Improved gravity field and station-coordinate estimates from laser tracking data

Knowledge of the long-wavelength features of the geopotential and the geocentric coordinates of satellite-tracking stations is significantly improved by the use of precision satellite tracking with lasers. Tracking data on nine satellites are combined with terrestrial gravimetry to obtain a spherical-harmonics representation of the geopotential complete through degree and order 24. Laser tracking data are used to determine the coordinates of tracking stations. This coordinate system is referred to an inertial reference frame by use of camera observations and observations of deep-space probes. Resulting geodetic parameters provide better satellite ephemerides and a reference for analyzing satellite-to-sea-surface altimetry.

Gaposchkin, E. M.↗
NASA NTRS1977

A generalized orthogonal coordinate system for describing families of axisymmetric and two-dimensional bodies

A generalized curvilinear orthogonal coordinate system is presented which can be used for approximating various axisymmetric and two-dimensional body shapes of interest to aerodynamicists. Such body shapes include spheres, ellipses, spherically capped cones, flat-faced cylinders with rounded corners, circular disks, and planetary probe vehicles. A set of transformation equations is also developed whereby a uniform velocity field approaching a body at any angle of attack can be resolved in the transformed coordinate system. The Navier-Stokes equations are written in terms of a generalized orthogonal coordinate system to show the resultant complexity of the governing equations.

Gnoffo, P. A.↗
NASA NTRS1979

Application of a numerical orthogonal coordinate generator to axisymmetric blunt bodies

An application of a simple numerical technique which allows for the rapid construction of orthogonal coordinate systems about axisymmetric blunt bodies is presented. This technique can generate orthogonal meshes which have unequally spaced points in two directions. Relations are given for the numerical generation of the metric coefficients. Body shapes ranging from simple analytical bodies to complex reverse curvature bodies are presented together with their orthogonal coordinate systems. The relatively good accuracy of the technique is shown in tabular data describing coordinate line slopes and metric coefficients. The predictor-corrector numerical method used to generate these results is both simple in concept and easy to program, so that the application of the technique should be broader than the results presented.

Graves, R. A., Jr.↗