SEARCH · Search NASA
Results for “correlation selection”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Emerging exciton physics in transition metal dichalcogenide heterobilayers
Atomically thin transition metal dichalcogenides (TMDs) are 2D semiconductors with tightly bound excitons and correspondingly strong light–matter interactions. Owing to the weak van der Waals bonding between layers, TMDs can be isolated and stacked together to form synthetic heterostructures with emergent electronic and excitonic properties. In this Review, we focus on the emergent exciton physics in moiré superlattices and in TMD heterobilayers coupled to optical cavities, where exciton behaviour can be dramatically modified by the environment. Further, in moiré superlattices, a small twist angle or lattice mismatch between the layers introduces a periodic variation in the interlayer alignment that leads to exciton localization, modified optical selection rules and strong correlations. In cavity–heterostructure systems, light–matter interaction is enhanced and exciton states can couple to the cavity to form exciton-polaritons, whose properties depend on the specific TMD layers involved and their alignment. Here, we discuss recent theoretical and experimental progress towards realizing exotic exciton states in TMD heterobilayers and comment on future scientific and technological directions.
Measurement‐based correlation approach for power system dynamic response estimation
Understanding power system dynamics is essential for online stability assessment and control applications. Global positioning system‐synchronised phasor measurement units and frequency disturbance recorders (FDRs) make power system dynamics visible and deliver an accurate picture of the overall operation condition to system operators. However, in the actual field implementations, some measurement data can be inaccessible for various reasons, for example, most notably failure of communication. In this study, a measurement‐based approach is proposed to estimate the missing power system dynamics. Specifically, a correlation coefficient index is proposed to describe the correlation relationship between different measurements. Then, the auto‐regressive with exogenous input identification model is employed to estimate the missing system dynamic response. The US Eastern Interconnection is utilised in this study as a case study. The robustness of the correlation approach is verified by a wide variety of case studies as well. Finally, the proposed correlation approach is applied to the real FDR data for power system dynamic response estimation. The results indicate that the correlation approach could help select better input locations and thus improve the response estimation accuracy.
Flue gas adsorption by single-wall carbon nanotubes: A Monte Carlo study
Adsorption of flue gases by single-wall carbon nanotubes (SWCNT) has been studied by means of Monte Carlo simulations. The flue gas is modeled as a ternary mixture of N{sub 2}, CO{sub 2}, and O{sub 2}, emulating realistic compositions of the emissions from power plants. The adsorbed flue gas is in equilibrium with a bulk gas characterized by temperature T, pressure p, and mixture composition. We have considered different SWCNTs with different chiralities and diameters in a range between 7 and 20 Å. Our results show that the CO{sub 2} adsorption properties depend mainly on the bulk flue gas thermodynamic conditions and the SWCNT diameter. Narrow SWCNTs with diameter around 7 Å show high CO{sub 2} adsorption capacity and selectivity, but they decrease abruptly as the SWCNT diameter is increased. For wide SWCNT, CO{sub 2} adsorption capacity and selectivity, much smaller in value than for the narrow case, decrease mildly with the SWCNT diameter. In the intermediate range of SWCNT diameters, the CO{sub 2} adsorption properties may show a peculiar behavior, which depend strongly on the bulk flue gas conditions. Thus, for high bulk CO{sub 2} concentrations and low temperatures, the CO{sub 2} adsorption capacity remains high in a wide range of SWCNT diameters, although the corresponding selectivity is moderate. We correlate these findings with the microscopic structure of the adsorbed gas inside the SWCNTs.
Spectroscopic detection of nitrogen concentrations in sagebrush
The ability to estimate foliar nitrogen (N) in semi-arid landscapes can yield information on nutritional status and improve our limited understanding of controls on canopy photosynthesis. We examined two spectroscopic methods for estimating sagebrush dried leaf and live shrub N content: first derivative reflectance (FDR) and continuum removal. Both methods used partial least squares (PLS) regression to select wavebands most significantly correlated with N concentrations in the samples. Sagebrush dried leaf spectra produced PLS models (R2 = 0.76–0.86) that could predict N concentrations within the dataset more accurately than PLS models generated from live shrub spectra (R2 = 0.41–0.63). Inclusion of wavelengths associated with leaf water in the FDR transformations appeared to improve regression results. Findings are encouraging and warrant further exploration into sagebrush reflectance spectra to characterize N concentrations.
THE STELLAR POPULATION AND STAR FORMATION PROPERTIES OF BLUE COMPACT DWARF GALAXIES
We study stellar populations, star formation histories (SFHs), and star formation properties for a sample of blue compact dwarf galaxies (BCDs) selected by cross-correlating the Gil de Paz et al. sample with the Sloan Digital Sky Survey Data Release 6. The sample includes 31 BCDs, which span a large range of galactic parameters. Using a stellar population synthesis method, we derive stellar populations and reconstruct SFHs for these BCDs. Our studies confirm that BCDs are not young systems experiencing their first star formation, but old systems undergoing a starburst activity. The stellar mass-weighted ages can be up to 10 Gyr, while the luminosity-weighted ages might be up to approximately three orders of magnitude younger ({approx}10 Myr) for most galaxies. Based on multiwavelength data, we also study the integrated star formation properties. The star formation rate (SFR) for our sample galaxies spans nearly three orders of magnitude, from a few 10{sup -3} to {approx}1 M{sub sun} yr{sup -1}, with a median value of {approx}0.1 M{sub sun} yr{sup -1}. We find that about 90% of BCDs in our sample have their birthrate parameter (the ratio of the current SFR to the averaged past SFR) b>2-3. We further discuss correlations of the current SFR with the integrated galactic stellar mass and explore the connection between SFR and metallicity.
OBSCURATION BY GAS AND DUST IN LUMINOUS QUASARS
We explore the connection between absorption by neutral gas and extinction by dust in mid-infrared (IR) selected luminous quasars. We use a sample of 33 quasars at redshifts 0.7 < z ≲ 3 in the 9 deg{sup 2} Boötes multiwavelength survey field that are selected using Spitzer Space Telescope Infrared Array Camera colors and are well-detected as luminous X-ray sources (with >150 counts) in Chandra observations. We divide the quasars into dust-obscured and unobscured samples based on their optical to mid-IR color, and measure the neutral hydrogen column density N {sub H} through fitting of the X-ray spectra. We find that all subsets of quasars have consistent power law photon indices Γ ≈ 1.9 that are uncorrelated with N {sub H}. We classify the quasars as gas-absorbed or gas-unabsorbed if N {sub H} > 10{sup 22} cm{sup –2} or N {sub H} < 10{sup 22} cm{sup –2}, respectively. Of 24 dust-unobscured quasars in the sample, only one shows clear evidence for significant intrinsic N {sub H}, while 22 have column densities consistent with N {sub H} < 10{sup 22} cm{sup –2}. In contrast, of the nine dust-obscured quasars, six show evidence for intrinsic gas absorption, and three are consistent with N {sub H} < 10{sup 22} cm{sup –2}. We conclude that dust extinction in IR-selected quasars is strongly correlated with significant gas absorption as determined through X-ray spectral fitting. These results suggest that obscuring gas and dust in quasars are generally co-spatial, and confirm the reliability of simple mid-IR and optical photometric techniques for separating quasars based on obscuration.
$\mathscr{PT}$ symmetry enforced twin exchange as the origin of chirality-induced spin selectivity
Chiral molecules, ubiquitous in chemistry and biology, can differentiate electrons by their spin, a phenomenon known as chirality-induced spin selectivity (CISS). Despite its robustness and technological relevance, CISS has resisted conventional explanation: Spin-orbit coupling (SOC) models cannot fully account for the observed magnitude, room-temperature persistence, or equilibrium signatures. Here, we argue that structural chirality enforces a twin-pair exchange mechanism via the indistinguishability principle, which intrinsically couples spin and spatial degrees of freedom such that wave functions cannot be factorized into spin and spatial components. We derive an effective Hamiltonian that describes both transport and equilibrium CISS phenomena and is non-Hermitian. However, the inherent pseudo-Hermiticity, with $\mathscr{PT}$ symmetry as a special case, ensures real eigenvalues and thermodynamic consistency. We demonstrate that our framework is a step toward resolving long-standing anomalies of CISS. It situates CISS alongside equilibrium symmetry-breaking phenomena such as ferromagnetism and superconductivity, with implications for spintronics, catalysis, and the origins of biological homochirality.
Changes in SSL Device Efficiency and Optical Performance Under Accelerated Aging Conditions
Lighting application efficiency (LAE) describes the efficient delivery of light from the light source to the lighted task and is viewed as a new frontier—increasing energy savings with solid-state lighting (SSL) technologies. The framework for LAE that is proposed by the U.S. Department of Energy (DOE) consists of four major elements: light source efficiency, optical delivery efficiency, spectral efficiency, and intensity effectiveness. This report focuses on a sampling of the available SSL products that can be broadly defined as having modified spectral output because the method of spectra modification has a significant impact on light source efficiency and long-term optical delivery and spectral efficiencies. This report focused on the changes in light source, optical delivery, and spectral efficiencies that occur during aging of SSL devices. An accelerated stress test (AST) regiment was developed for the devices under test (DUTs) examined in this report to provide insights into how the performance of SSL devices change with aging. The AST protocols demonstrate that the SSL products discussed in this report often reduce light source efficiency to achieve different spectral characteristics. In addition, aging of the optical components (e.g., lenses, solder masks) in SSL devices can produce increased light absorption, which negatively impacts optical delivery efficiency and light source efficiency. The modified spectral outputs of the selected SSL products discussed in this report come in a variety of form factors and achieve enhanced optical performance by using a variety of methods. All of the products examined in this study use mid-power light-emitting diodes (MP-LEDs), although the number, configuration, phosphor content, and light-emitting diode (LED) pump of the MP-LEDs differ. Product MS-1 is a 60-watt (W) replacement A19 lamp with a hermetically sealed glass globe, which contains an embedded optical filter to absorb green and yellow emissions, thereby creating a “sunlike” modified spectrum. Product MS-2 is a 60-W replacement A19 lamp with 30 MP-LEDs, and it uses a violet LED pump, along with green and red phosphor emissions, to produce a “healthy” spectrum. This spectrum omits blue emissions in an effort to reduce melanopic lux. Product MS-3 is an LED module consisting of 21 MP-LEDs that use a violet LED pump, along with blue, green, and red phosphors, to produce a “sunlike” spectrum. Products MS-4 and MS-5 are both 6-inch (in) downlights that use a manual switching mechanism so that users can select application-specific correlated color temperatures before installation. Products MS-4 and MS-5 both contain two LED primaries (2,700 Kelvin [K] and 5,000 K) for spectral tuning. Product MS-4 contains 12 MP-LEDs for each LED primary, and Product MS-5 contains 10 MP-LEDs for each LED primary. This report summarizes the overall findings from up to 8,000 hours (hrs) of AST on the lamp DUTs (Products MS-1 and MS-2); up to 5,000 hrs of AST on the LED light engine DUTs (Product MS-3); and up to 7,000 hrs of AST on the downlight DUTs (Products MS-4 and MS-5). The AST procedures used in this study included a room temperature operational life (RTOL) test, an operational life test conducted at 45 degrees Celsius (°C; 45OL) test, an operational life test conducted at 75°C (75OL), a wet high-temperature operational life test performed at 65°C and 90% relative humidity (6590), and a wet high-temperature operational life test performed at 75°C and 75% relative humidity (7575). The AST procedures used for Products MS-1 and MS-2 were RTOL, 45OL, and 6590. The AST procedures used for Products MS-3, MS-4, and MS-5 were RTOL, 75OL, and 7575. During the ASTs described herein, separate populations of each product (three DUTs in each population for Products MS-1, MS-2, MS-4, and MS-5; four DUTs in each population for Product MS-3) were subjected to power cycling of 1 hr on and 1 hr off. The key findings from this study include the following. Enhanced optical performance came at the cost of reduced light source efficiency for the lamps and light engines examined in this study. The optical filter used to produce a “sunlike” spectrum for Product MS-1 reduced light source efficiency by 26%, from 113 lumens per watt (lm/W) to 85 lm/W. Products MS-2 and MS-3 that used a violet-pumped LED to achieve “healthy” and “sunlike” enhanced optical performance, respectively, suffered the largest reduction in initial light source efficiency (49 lm/W for Product MS-2 and 68 lm/W for Products MS-3) perhaps because of the use of violet LED as the optical pump. Product MS-2 also had the poorest color fidelity because of undersaturation of blues and oversaturation of greens and yellows. Chromaticity maintenance of the products in this study was generally good, with parametric failure only occurring for one product at one AST condition (i.e., Product MS-3 at 7575). The chromaticity shift for Product MS-3 in 7575 test conditions resulted from reduced emissions of the broad green and red phosphors used to mimic sunlight in the 500–750 nanometer (nm) range. As a result of these phosphor emission losses, chromaticity shifted toward the more stable violet-pumped LED and blue phosphor. Although chromaticity maintenance was acceptable for most products tested, different chromaticity shift mechanisms were observed for temperature and humidity tests compared with temperature alone for Products MS-1, MS-2, and MS-3. For Product MS-1, a relative increase in green emissions was observed with humidity, which may indicate humidity-accelerated degradation of the optical filter at green wavelengths (optical delivery efficiency reduction) or degradation of the emitters in the red region (spectral efficiency reduction). The violet-pumped products (i.e., MS-2 and MS-3) exhibited different chromaticity shift behavior in the temperature-humidity environments, with Product MS-2 shifting generally yellow because of photo-induced oxidation of the plastic globe (i.e., a reduction of optical delivery efficiency) and Product MS-3 shifting toward violet and blue emitters because of faster loss of emission from green and red phosphors (i.e., a reduction in spectral efficiency). Because of an initial drop in power consumption, the light source efficiency of downlights (Products MS-4 and MS-5) increased at RTOL throughout the test duration. The light source efficiency initially increased during 75OL until a decay in luminous flux maintenance (LFM) dominated light source efficiency, whereas the light source efficiency decreased for the entire 7575 test duration. It was found that increasing the ambient environment of an SSL device from 25°C to 75°C decreases the LFM by 2.7 to 5.5, depending on design of the SSL device. Adding humidity to the system (75OL to 7575) was found to decrease LFM by another factor of approximately 3.0. A common location of failure was identified for the downlights (Products MS-4 and MS-5) operated in the 7575 environment. This failure abruptly occurred between 3,000 to 5,000 hrs of testing on the film capacitor of the electromagnetic interference (EMI) filter near the diode bridge for 11 of the 12 downlights. It is likely that this failure was caused by a combination of the high electrical voltage across the capacitor, the location of the capacitor near the heat sources (e.g., transformers, diode bridges, power resistors), and the high stress environment of 7575. Longer test times are needed to fully understand the LFM, luminous efficacy changes, and chromaticity shifts for some of the products. Because of the high reliability, light source efficiency, and spectral tuning capabilities of LEDs, the expectations of LAE for SSL products are greatly increased over traditional lighting products. The data gathered in this report begin to provide an understanding of the tradeoffs that current SSL products undergo when optimizing the different efficiency elements of LAE. As discussed in this report, the findings from the tests conducted show that the optimization of spectral efficiency can come at the cost of initial light source efficiency. Furthermore, the introduction of violet LEDs can promote long-term optical delivery efficiency degradation, and the introduction of optical filters or new phosphors can lead to unwanted spectral efficiency changes because the ratio of phosphor emitters changes with aging. The data presented in this report also identified a common failure location in 6-in downlights. The results regarding long-term behavior of the modified spectra devices studied provide valuable information about changes to the light source, spectral, and optical delivery efficiencies as the devices age. This information can be used to improve future SSL designs.
Preliminary Investigation of Supernova Neutrino Detection Backgrounds in MicroBooNE
MicroBooNE provides a testbed for studying MeV-scale activity relevant to supernova neutrino detection in LArTPCs. This work focuses on classifying isolated mm-scale energy depositions ( blips ), in contrast to longer track depositions with lengths of ~O(10cm), as possible νₑ CC or elastic scatter candidates from a supernova burst. Cosmogenic blip backgrounds are characterized using CRT-tagged muons and spatial correlations with decay products. Selection cuts are defined for rejecting Tl-208 decay radiogenic blip backgrounds and cosmogenic blip backgrounds; they are based on blip energy and distance from nearby cosmic muon tracks. Results affirm strategies for background rejection and signal efficiency in future low-energy searches, including DUNE.
Dark Energy Survey Year 1 Results: tomographic cross-correlations between DES galaxies and CMB lensing from SPT+Planck
We measure the cross-correlation between redMaGiC galaxies selected from the Dark Energy Survey (DES) Year-1 data and gravitational lensing of the cosmic microwave background (CMB) reconstructed from South Pole Telescope (SPT) and Planck data over 1289 sq. deg. When combining measurements across multiple galaxy redshift bins spanning the redshift range of $0.15
Examination Of IASCC In 304 Stainless Steel Core Shroud From A Commercial Boiling Water Reactor (BWR)
The 304 stainless steel core shroud and the accompanying weld material from a commercial boiling-water reactor (BWR) experienced an estimated dose of ~3.5 dpa neutron irradiation leading to irradiation-assisted stress corrosion cracking (IASCC). The resulting IASCC crack tips are examined with high-resolution analysis techniques, including scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and atom probe tomography (APT), with select examples of directly correlated STEM/APT observations. Analytical observations reveal the crack morphology, composition, microstructure, and any associated corrosion-induced or radiation-induced segregation in the local metal grain boundaries ahead of the propagating SCC cracks. The observed oxide composition and structure were in-line with expectations, consisting of a Cr-rich inner oxide and a Fe-rich outer oxide, with the leading crack tip oxide being Cr-rich. In addition, the leading grain boundary exhibited typical radiation-induced segregation signatures that were largely unperturbed by the accompanying corrosion. Finally, the quantitative capabilities and limitations of STEM and APT in the context of corrosion fronts and grain boundary chemistry from the directly correlated measurements are discussed.
A New Empirical Correlation for Condensation Heat Transfer Coefficient of Air-Steam Mixture on a Vertical Tube
The Passive Containment Cooling System (PCCS) provides passive means to remove the decay heat and protect the integrity of the containment during severe accidents. For thermal design and performance evaluation of the PCCS condensers, one needs experimental data and a heat transfer model for condensation heat transfer in the presence of a noncondensable gas on a vertical tube. The main objective of this study is to propose a new empirical correlation, based on the experimental data obtained in Jeju National University, expressed in terms of dimensionless numbers. Dimensionless numbers to account for vapor-gas condensation phenomena are found by non-dimensionalizing the governing boundary layer equations, and the predictions of the proposed correlation is validated with selected sets of experimental data. (authors)
Solid-State NMR Studies Reveal Native-like β-Sheet Structures in Transthyretin Amyloid
Structural characterization of amyloid rich in cross-β structures is crucial for unraveling the molecular basis of protein misfolding and amyloid formation associated with a wide range of human disorders. Elucidation of the β-sheet structure in noncrystalline amyloid has, however, remained an enormous challenge. Here we report structural analyses of the β-sheet structure in a full-length transthyretin amyloid using solid-state NMR spectroscopy. Magic-angle-spinning (MAS) solid-state NMR was employed to investigate native-like β-sheet structures in the amyloid state using selective labeling schemes for more efficient solid-state NMR studies. Analyses of extensive long-range 13 C- 13 C correlation MAS spectra obtained with selectively 13 CO- and 13 Cα-labeled TTR reveal that the two main β-structures in the native state, the CBEF and DAGH β-sheets, remain intact after amyloid formation. The tertiary structural information would be of great use for examining the quaternary structure of TTR amyloid.
Understanding of catalytic transformation of shale gas and development of catalysts with high activity and selectivity through experimental exploration and theoretical simulation
Catalysis on transition metal oxides is equivalently important in contrast to that on metal catalysts in chemical and energy transformations. Understanding of catalytic reactions on early transition metal oxide catalysts is fundamentally intriguing and of great practical interest in efficient production of chemical and fuel feedstocks. Fundamental understanding of catalysis on transition metal oxide-based catalysts has been lagged behind catalysis on metals due to the complexity of chemistry and structure of surface and bulk of oxide catalysts and their structural flexibility in reactive environment at high temperatures. The funded DOE project explored surface chemistry of a few reducible oxides including CeO 2 - based, Co 3 O 4 -based, and CoO-based which are significant for heterogeneous catalysis. Through in-situ studies using ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, we revealed phase transformation, the accompanying changes of surface chemistry and structure, and uncovered their correlations with catalytic activity and selectivity in catalytic reactions including reduction of NO with CO, water-gas shift, and chemical transformations of methane to methanol and acetic acid under mild conditions. Driven by the following two facts, we propose to pursue fundamental understanding of oxidative dehydrogenation of ethane and oxidative coupling of methane on oxide catalysts through both in-situ studies of catalyst surfaces during catalysis and computational studies in the renewal proposal. One driving force is the significance of oxidative dehydrogenation of ethane and oxidative coupling of methane for utilization of earth-abundant, relatively inexpensive energy resource and the urgent needs of efficient chemical processes to generate ethylene from shale gas. The other is that exploration of surface chemistry of oxide catalysts during catalysis has remained challenging though it is critical in deeply understanding catalysis on oxide catalysts and developing oxide-based catalysts toward high selectivity and activity. Therefore, the overall objective of the renewal proposal is to mechanistically understand the oxidative dehydrogenation of ethane and oxidative coupling of methane at a molecular level through building correlations between surface chemistry of catalysts during catalysis and the corresponding catalytic performances, and thus design catalysts with high selectivity and activity for production of ethylene with the guidance achieved from these fundamental studies. Experiments were designed to explore the influences of electronic states of cations supported on substrate oxides, cations of surface of the substrate oxides, and surface lattice oxygen atoms of the substrate oxides on their catalytic selectivity and activity. Surface chemistry, including oxidation state of the surface monomers and cations of substrate oxides and density of oxygen vacancies during catalysis, will be tracked with AP-XPS during catalysis. A correlation between surface chemistry of these catalysts at different temperatures and their corresponding catalytic selectivity for production of ethylene and activity will be built. Computational studies will calculate adsorption energies of reactant molecules and their dissociated species and intermediates on the catalyst surface, search transition states, and simulate reaction pathway close to experimental studies. By integrating the computational studies into these correlations to be built from experimental studies, fundamental understanding of the catalytic mechanisms of oxidative dehydrogenation of ethane and oxidative coupling of methane at a molecular level will be achieved. With these insights, new catalysts with high selectivity and activity will be developed.
The Optical Two- and Three-dimensional Fundamental Plane Correlations for Nearly 180 Gamma-Ray Burst Afterglows with Swift/UVOT, RATIR, and the Subaru Telescope
Gamma-ray bursts (GRBs) are fascinating events due to their panchromatic nature. We study optical plateaus in GRB afterglows via an extended search into archival data. We comprehensively analyze all published GRBs with known redshifts and optical plateaus observed by many ground-based telescopes (e.g., Subaru Telescope, RATIR) around the world and several space-based observatories such as the Neil Gehrels Swift Observatory. We fit 500 optical light curves, showing the existence of the plateau in 179 cases. This sample is 75% larger than the previous one, and it is the largest compilation so far of optical plateaus. We discover the 3D fundamental plane relation at optical wavelengths using this sample. This correlation is between the rest-frame time at the end of the plateau emission, ${T}_{\mathrm{opt}}^{* }$, its optical luminosity, L opt , and the peak in the optical prompt emission, L peak,opt , thus resembling the three-dimensional (3D) X-ray fundamental plane (the so-called 3D Dainotti relation). We correct our sample for redshift evolution and selection effects, discovering that this correlation is indeed intrinsic to GRB physics. We investigate the rest-frame end-time distributions in X-rays and optical (${T}_{\mathrm{opt}}^{* }$, ${T}_{{\rm{X}}}^{* }$), and conclude that the plateau is achromatic only when selection biases are not considered. We also investigate if the 3D optical correlation may be a new discriminant between optical GRB classes and find that there is no significant separation between the classes compared to the Gold sample plane after correcting for evolution.
Using Whisper-1.1 to Guide Improvements to Nuclear Data Evaluations [Slides]
This presentation covers the use of Whisper-1.1 to guide improvements to nuclear data evaluations. This presentation provides a brief overview on what Whisper-1.1 is. Additionally covered is the benchmark selection: using benchmark and application correlations (ck) computed using nuclear data sensitivity profiles and covariance data. Next the presentation touches on compute bias and bias uncertainty based on selected benchmarks using Extreme Value Theory Finally the presentation shows the additional margin for nuclear data uncertainty estimated by GLLS.
A correlation between the intrinsic brightness and average decay rate of gamma-ray burst X-ray afterglow light curves
We present a correlation between the average temporal decay (α{sub X,avg,>200s}) and early-time luminosity (L{sub X,200s}) of X-ray afterglows of gamma-ray bursts as observed by the Swift X-ray Telescope. Both quantities are measured relative to a rest-frame time of 200 s after the γ-ray trigger. The luminosity–average decay correlation does not depend on specific temporal behavior and contains one scale-independent quantity minimizing the role of selection effects. This is a complementary correlation to that discovered by Oates et al. in the optical light curves observed by the Swift Ultraviolet Optical Telescope. The correlation indicates that, on average, more luminous X-ray afterglows decay faster than less luminous ones, indicating some relative mechanism for energy dissipation. The X-ray and optical correlations are entirely consistent once corrections are applied and contamination is removed. We explore the possible biases introduced by different light-curve morphologies and observational selection effects, and how either geometrical effects or intrinsic properties of the central engine and jet could explain the observed correlation.