Search NASA⌕ Search

SEARCH · Search NASA

Results for “data platform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Radar cross calibration investigation TAMU radar polarimeter calibration measurements

A short pulse, 20 MHz bandwidth, three frequency radar polarimeter system (RPS) operates at center frequencies of 10.003 GHz, 4.75 GHz, and 1.6 GHz and utilizes dual polarized transmit and receive antennas for each frequency. The basic lay-out of the RPS is different from other truck mounted systems in that it uses a pulse compression IF section common to all three RF heads. Separate transmit and receive antennas are used to improve the cross-polarization isolation at each particular frequency. The receive is a digitally controlled gain modulated subsystem and is interfaced directly with a microprocesser computer for control and data manipulation. Antenna focusing distance, focusing each antenna pair, rf head stability, and polarization characteristics of RPS antennas are discussed. Platform and data acquisition procedures are described.

Blanchard, A. J.↗

ERTS-1 data collection system: Status and performance

The Data Collection System flown on the first Earth Resources Technology Satellite (ERTS-1) relays earth resources data from remotely located in-situ sensors to Goddard Space Flight Center. Data is received at Goddard at least twice each day from every sensor installation and is distributed to users (who operate the sensors and transmitters) by mail and teletype. The system consists of a data formatting and transmitting unit, called the Data Collection Platform (DCP), a receiver and a retransmitter aboard ERTS-1; and receiving, demodulating and decoding equipment located at the Goldstone, California and Goddard data acquisition stations. Data is transmitted from the data acquisition stations to the ERTS Control Center at Goddard, then to the NASA (ERTS) Data Processing Facility (NDPF) where it is processed and distributed to users. Experience to date indicates that the design of the ERTS-1 Data Collection System is adequate for operational use for 50% of the users and, with minor modifications, could meet the requirements of 75%. Some users will have to augment the system by other data collection techniques to meet their operational requirements.

Painter, J. E.↗

A Preliminary Study of a Buoy System for Acquisition, Transmission, and Management of Hydrological Data Obtained from In-situ Measurements

The requirements for a system of remotely located, data collection buoys are considered first for a prototype system to be used in conjunction with the Earth Resources Technology Satellite (ERTS-A), and then for a more advanced system. The necessary sensor characteristics for compatibility with the ERTS-A data collection platforms are considered, as well as possible sites for location of the prototype buoys. The advanced system is considered from the standpoint of continuous data collection both through satellite data relay and ground telemetry systems. Management of the data from a buoy system is analyzed, especially with regard to the advanced system.

Elliott, J. M.↗

Umbilical Stiffness Matrix Characterization and Testing for Microgravity Science Payloads

This paper describes efforts of testing and analysis of various candidate cables and umbilicals for International Space Station microgravity science payloads. The effects of looping, large vs. small displacements, and umbilical mounting configurations were assessed. A 3-DOF stepper motor driven fixture was used to excite the umbilicals. Forces and moments were directly measured in all three axes with a 6-DOF load cell in order to derive suitable stiffness matrices for design and analysis of vibration isolation controllers. Data obtained from these tests were used to help determine the optimum type and configuration of umbilical cables for the International Space Station microgravity science glovebox (MSG) vibration isolation platform. The data and procedures can also be implemented into control algorithm simulations to assist in validation of actively controlled vibration isolation systems. The experimental results of this work are specific in support of the Glovebox Integrated Microgravity Isolation Technology (g-LIMIT) isolation platform, to be located in the microgravity science glovebox aboard the U.S. Destiny Laboratory Module.

Engberg, Robert C.↗

Serving Fisheries and Ocean Metadata to Communities Around the World

NASA's Global Change Master Directory (GCMD) assists the oceanographic community in the discovery, access, and sharing of scientific data by serving on-line fisheries and ocean metadata to users around the globe. As of January 2006, the directory holds more than 16,300 Earth Science data descriptions and over 1,300 services descriptions. Of these, nearly 4,000 unique ocean-related metadata records are available to the public, with many having direct links to the data. In 2005, the GCMD averaged over 5 million hits a month, with nearly a half million unique hosts for the year. Through the GCMD portal (http://qcrnd.nasa.qov/), users can search vast and growing quantities of data and services using controlled keywords, free-text searches or a combination of both. Users may now refine a search based on topic, location, instrument, platform, project, data center, spatial and temporal coverage. The directory also offers data holders a means to post and search their data through customized portals, i.e. online customized subset metadata directories. The discovery metadata standard used is the Directory Interchange Format (DIF), adopted in 1994. This format has evolved to accommodate other national and international standards such as FGDC and IS019115. Users can submit metadata through easy-to-use online and offline authoring tools. The directory, which also serves as a coordinating node of the International Directory Network (IDN), has been active at the international, regional and national level for many years through its involvement with the Committee on Earth Observation Satellites (CEOS), federal agencies (such as NASA, NOAA, and USGS), international agencies (such as IOC/IODE, UN, and JAXA) and partnerships (such as ESIP, IOOS/DMAC, GOSIC, GLOBEC, OBIS, and GoMODP), sharing experience, knowledge related to metadata and/or data management and interoperability.

Meaux, Melanie↗

Serving Fisheries and Ocean Metadata to Communities Around the World

NASA's Global Change Master Directory (GCMD) assists the oceanographic community in the discovery, access, and sharing of scientific data by serving on-line fisheries and ocean metadata to users around the globe. As of January 2006, the directory holds more than 16,300 Earth Science data descriptions and over 1,300 services descriptions. Of these, nearly 4,000 unique ocean-related metadata records are available to the public, with many having direct links to the data. In 2005, the GCMD averaged over 5 million hits a month, with nearly a half million unique hosts for the year. Through the GCMD portal (http://gcmd.nasa.gov/), users can search vast and growing quantities of data and services using controlled keywords, free-text searches, or a combination of both. Users may now refine a search based on topic, location, instrument, platform, project, data center, spatial and temporal coverage, and data resolution for selected datasets. The directory also offers data holders a means to advertise and search their data through customized portals, which are subset views of the directory. The discovery metadata standard used is the Directory Interchange Format (DIF), adopted in 1988. This format has evolved to accommodate other national and international standards such as FGDC and IS019115. Users can submit metadata through easy-to-use online and offline authoring tools. The directory, which also serves as the International Directory Network (IDN), has been providing its services and sharing its experience and knowledge of metadata at the international, national, regional, and local level for many years. Active partners include the Committee on Earth Observation Satellites (CEOS), federal agencies (such as NASA, NOAA, and USGS), international agencies (such as IOC/IODE, UN, and JAXA) and organizations (such as ESIP, IOOS/DMAC, GOSIC, GLOBEC, OBIS, and GoMODP).

Meaux, Melanie F.↗

Telemetry Tracking & Control (TT&C) - First TDRSS, then Commercial GEO & Big LEO and Now Through LEO

The advent of low earth orbit (LEO) commercial communication satellites provides an opportunity to dramatically reduce Telemetry, Tracking and Control (TT&C) costs of launch vehicles, Unpiloted Aerial Vehicles (UAVs), Research Balloons and spacecraft by reducing or eliminating ground infrastructure. Personnel from the Goddard Space Flight Center's Wallops Flight Facility (GSFC\WFF) have successfully used commercial Geostationary Earth Orbit (GEO) and Big LEO communications satellites for Long Duration Balloon Flight TT&C. The Flight Modem is a GSFC\WFF Advanced Range Technology initiative (ARTI) designed to streamline TT&C capability in the user community of these scientific data gathering platforms at low cost. Making use of existing LEO satellites and adapting and ruggedized commercially available components; two-way, over the horizon communications may be established with these vehicles at great savings due to reduced infrastructure. Initially planned as a means for permitting GPS data for tracking and recovery of sounding rocket and balloon payloads, expectations are that the bandwidth can soon be expanded to allow more comprehensive data transfer. The system architecture which integrates antennas, GPS receiver, commercial satellite packet data modem and a single board computer with custom software is described and technical challenges are discussed along with the plan for their resolution. A three-phase testing and development plan is outlined and the current results are reported. Results and status of ongoing flight tests on aircraft and sounding rockets are reported. Future applications on these platforms and the potential for satellite support are discussed along with an analysis of cost effectiveness of this method vs. other tracking and data transmission schemes.

Morgan, Dwayne R.↗

EDX ClaiMM

EDX ClaiMM is a centralized data & analytical platform designed to revolutionize U.S. critical minerals and materials (CMM) activities. By providing a robust digital infrastructure, ClaiMM will accelerate the combination, leveraging, and rapid utilization of vital data, advanced tools, and cutting-edge research advancements in CMM. This adaptive digital research hub connects the CMM community to essential knowledge products and offers access to interoperable datasets, databases, models, software, and tools from the National Energy Technology’s (NETL’s) Energy Data eXchange (EDX) and other authoritative sources, serving both public and private sectors. EDX ClaiMM delivers AI-informed solutions to address fundamental knowledge gaps and fosters the innovation of new techniques for enhanced characterization and recovery of CMMs within the U.S. By leveraging cloud-hosted, scalable digital infrastructure, ClaiMM meets public–private applied energy needs. It equips the CMM community with priority digital resources that harness on-site and cloud compute capabilities, enabling big data storage, advanced processing, analytics, and visualization.

Critical Materials; Critical Minerals; Rare Earth ↗

ERTS-1 data collection systems used to predict wheat disease severities

The feasibility of using the data collection system on Earth Technology Satellite-1 to predict wheat leaf rust severity and resulting yield loss was tested. Ground-based data-collection platforms (DCPs), placed in two commercial wheat fields, transmitted to the satellite such meteorological information as maximum and minimum temperature, relative humidity, and hours of free moisture. Meteorological data received from the two DCPs from April 23 to 29 were used to estimate the disease progress curve. Values from the curve were used to predict the percentage decrease in wheat yields resulting from leaf rust. Actual decrease in yield obtained by applying a zinc and maneb spray to control leaf rust, and then comparing yields of the controlled (healthy) and the noncontrolled (rusted) areas. In each field, a 9% decrease in yield was predicted by the DCP-derived data; actual decreases were 12% and 9%.

Kanemasu, E. T.↗

Use of ERTS-1 DCS in the management and control of water resources systems

The ERTS-1 experimental hydrologic Data Collection Platform System that has been established at the New England Division (NED), the reasons for getting involved with the experiment, some of the initial problems associated with the data collection hardware, and a preliminary conclusion based on operating experiences are reviewed. The New England Region includes the states of Maine, New Hampshire, Vermont, Massachusetts, Rhode Island and Connecticut. The entire area consists of approximately 97,000 sq. km. (60,000 square miles), half of which is in the state of Maine. The limits of the NED are all of Maine, New Hampshire and Vermont to the western limits of the Connecticut River basin, Massachusetts, Connecticut to the western edge of the Housatonic River basin and Rhode Island. All reservoirs have flood control as a primary purpose. Other uses include water supply, recreation and low flow augmentation. However, none of the reservoirs are presently operated for hydroelectric power, navigation, or irrigation purposes. Basically then, flood control regulation is NED's primary concern.

Finegan, J. W., Jr.↗

Comparisons of Temporal and Spatial Trends in the Spatially Complete Global Spectral Surface Albedos Products

Five years of spatially complete snow-free land surface albedo data have been prepared using high quality white-sky and black-sky land surface albedo observations (MOD43B3) from the MODIS instrument aboard NASA's Terra satellite platform. The data were generated using an updated ecosystem-dependent temporal interpolation technique. In this paper, we describe the refinements in the technique and the creation of a spatially complete snow-free five-year aggregate climatology product. This paper also describes an error analysis of the interpolation technique. The filled albedo products are examined through comparisons of temporal and spatial trends for pixels that have been filled versus pixels that have been retained in the original MOD43B3 values. The variability in the trends showcase how the filling technique maintains the pixel-level spatial, spectral, and temporal integrity of the MOD43B3 data. These comparisons are made for both a single-year of filled data, year 2002, and for the five-year aggregate climatology product.

Moody, Eric G.↗

Accelerating Resilience of the Community through Holistic Engagement and use of Renewables (ARCHER) Planning Framework

The primary objective of the Accelerating Resilience of the Community through Holistic Engagement and Use of Renewables (ARCHER) initiative was to identify and incorporate the unique variations in energy burden, social vulnerability, living conditions, and access to essential services that differ across communities. By accounting for these localized factors—down to the neighborhood level—the project supports more targeted and effective investments in community resilience. The framework seeks to establish practical planning guidance, methods, and performance measures for community energy resilience, integrate community-level and electric utility system resilience planning, and assess its effectiveness through comparison with conventional and operational planning approaches. A key component of the project was its data exchange platform, which is used to evaluate and demonstrate the tools, methodologies, and planning approaches developed through ARCHER. This open-source platform enables developers and vendors of distribution and outage management systems to build upon the research by incorporating its concepts into their own tools and workflows. This capability is enabled by the transparent availability of data, functional requirements, and the underlying information model. The project yielded several important insights. First, meaningful engagement with communities is essential to achieving comprehensive resilience outcomes. Second, resilience planning is most effective when electric grid considerations and broader community needs are addressed in a coordinated manner. Third, the use of platforms that allow for real-time input from communities can enhance utility responsiveness during restoration activities. Fourth, a structured and systematic planning approach can successfully translate ARCHER concepts into practice. Fifth, the development of an integrated metric that reflects both grid performance and community impacts provides a more holistic basis for evaluating resilience. Finally, incorporating community engagement and equity considerations into grid operations is critical, particularly during severe weather events that result in extended outages.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Preliminary analysis of ERTS-relayed water resources data in the Delaware River Basin

Preliminary analysis of ERTS-DCS data from water-resources stations in the Delaware River Basin indicates that the Data-Collection System is performing well. Data-Collections Platforms have been successfully interfaced with five stream-gaging station and three ground-water observation wells and are being interfaced with 12 water-quality monitors in the basin. Data are being relayed during four or five ERTS orbital passes per day, which is within the design specifications of the ERTS-DCS.

Paulson, R. W.↗

Analytic Calculation of Noise Power Robbing, NPR, and Polarization Isolation Degradation

Three Geostationary Operational Environmental Satellite (GOES) R transponders (services) required analysis and measurements to develop an accurate link budget. These are a) Search and Rescue transponder which suffers from power robbing due to thermal uplink noise, b) the Data Collection Platform Report which suffers from degradation due to NPR (Noise Power Ratio), and c) GOES Rebroadcast transponder which uses a dual circular downlink L band for which there was no depolarization data. The first two services required development of extended link budget to analytically calculate the impact of these degradations which are shown to have a significant impact on the link budget. The third service required measurements of atmospheric L band CP depolarization as there were no known previous measurements and results are reported her

Peters, Robert↗

Nimbus 6 Random Access Measurement System applications experiments

The advantages of a technique in which data collection platforms randomly transmit signal to a polar orbiting satellite, thus eliminating satellite interrogation are demonstrated in investigations of the atmosphere; oceanographic parameters; Arctic regions and ice conditions; navigation and position location; and data buoy development.

Cote, C. E.↗

ERTS-1 data collection systems used to predict wheat disease severities

The author has identified the following significant results. The feasibility of using the data collection system on ERTS-1 to predict wheat leaf rust severity and resulting yield loss was tested. Ground-based data collection platforms (DCP'S), placed in two commercial wheat fields in Riley County, Kansas, transmitted to the satellite such meteorological information as maximum and minimum temperature, relative humidity, and hours of free moisture. Meteorological data received from the two DCP'S from April 23 to 29 were used to estimate the disease progress curve. Values from the curve were used to predict the percentage decrease in wheat yields resulting from leaf rust. Actual decrease in yield was obtained by applying a zinc and maneb spray (5.6 kg/ha) to control leaf rust, then comparing yields of the controlled (healthy) and the noncontrolled (rusted) areas. In each field a 9% decrease in yield was predicted by the DCP-derived data; actual decreases were 12% and 9%.

Kanemasu, E. T.↗

National Media Laboratory media testing results

The government faces a crisis in data storage, analysis, archive, and communication. The sheer quantity of data being poured into the government systems on a daily basis is overwhelming systems ability to capture, analyze, disseminate, and store critical information. Future systems requirements are even more formidable: with single government platforms having data rate of over 1 Gbit/sec, greater than Terabyte/day storage requirements, and with expected data archive lifetimes of over 10 years. The charter of the National Media Laboratory (NML) is to focus the resources of industry, government, and academia on government needs in the evaluation, development, and field support of advanced recording systems.

Mularie, William↗

Addressing Investment Barriers by Improving Documentation of Sustainable Biomass Resources (Workshop Report)

On May 8, 2025, Oak Ridge National Laboratory (ORNL), in collaboration with IEA Bioenergy Task 43 and the Biofuture Platform, convened an international workshop in Vancouver, Canada to improve the Global Biomass Resource Assessment. This effort addresses investment barriers in the global bioeconomy by improving the transparency, consistency, and usability of biomass supply data. The workshop gathered 38 participants from 11 countries, representing government agencies, academia, and industry. Participants reviewed the status of the biomass dataset, tested the data-sharing platform, and provided direct input on priorities for improvement.

09 BIOMASS FUELS↗