Search NASA⌕ Search

SEARCH · Search NASA

Results for “dendrite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Resistivity and thickness effects in dendritic web silicon solar cells

The decrease of minority carrier lifetime as resistivity decreases in dendritic-web silicon solar cells is addressed. This variation is shown to be consistent with the presence of defect levels in the bandgap which arise from extended defects in the web material. The extended defects are oxide precipitates (SiOx) and the dislocation cores they decorate. Sensitivity to this background distribution of defect levels increases with doping because the Fermi level moves closer to the majority carrier band edge. For high-resistivity dendritic-web silicon, which has a low concentration of these extended defects, cell efficiencies as high as 16.6 percent (4 sq cm, 40 ohm-cm boron-doped base, AM1.5 global, 100 mW/sq cm, 25 C JPL LAPSS1 measurement) and a corresponding electron lifetime of 38 microsec have been obtained. Thickness effects occur in bifacial cell designs and in designs which use light trapping. In some cases, the dislocation/precipitate defect can be passivated through the full thickness of web cells by hydrogen ion implantation.

Meier, D. L.↗
NASA NTRS1988

On dendritic growth in undercooled melts

The role of gravity-dependent convection in the steady-state growth of dendrites in undercooled melts is investigated theoretically. The model described by Huang and Glicksman (1981) is extended and refined, using the concept of a thermal diffusion boundary layer (Burton et al., 1987) to characterize the dendritic interface. Theoretical predictions are presented in graphs and shown to be in good general agreement with published experimental data on succinonitrile. The need for careful space experiments to clarify the role of nongravity-dependent convection is indicated.

Ohsaka, K.↗
NASA NTRS1989

Interfacial wave theory for dendritic structure of a growing needle crystal. I - Local instability mechanism. II - Wave-emission mechanism at the turning point

The complicated dendritic structure of a growing needle crystal is studied on the basis of global interfacial wave theory. The local dispersion relation for normal modes is derived in a paraboloidal coordinate system using the multiple-variable-expansion method. It is shown that the global solution in a dendrite growth process incorporates the morphological instability factor and the traveling wave factor.

Xu, Jian-Jun↗
NASA NTRS1990

Stability of dendritic arrays

An approximate method for studying steady-state properties and linear stability of the dendritic arrays that are formed in directional solidification of alloys is proposed. This analysis is valid at high growth rates where the primary spacing between dendrites is larger than the velocity-dependent solutal diffusion length. A neutral stability boundary is computed and it is found that, in the situations where the results should be valid, the experimental data of Somboonsuk, et al. (1984) lie in the stable region, well away from the boundary.

Warren, James A.↗
NASA NTRS1992

The transition from columnar to equiaxed dendritic growth in proeutectic, low-volume fraction copper, Pb-Cu alloys

Lead, 17.1, 11.2, and 5 volume fraction copper (14, 9, and 4 wt pct Cu) alloys have been directionally solidified at constant growth velocities ranging from 1 to 100 microns/s. Serially increasing the growth velocity within this range results in a graded microstructural transition from fully columnar, albeit segregated, copper dendrites in a lead matrix to one consisting only of equiaxed grains. The imposed velocity necessary to effect fully equiaxed growth is found to drop rapidly as the volume fraction of copper is decreased. Factors which complicate the controlled, directional solidification of these alloys are discussed and the experimental results are interpreted in view of, and seen to be in qualitative agreement with, Hunt's theory on the transition from columnar to equiaxed growth of dendrites.

Kim, Shinwoo↗
NASA NTRS1992

Asteroid core crystallization by inward dendritic growth

The physics of the asteroid core crystallization process in metallic asteroids is investigated, with special attention given to the initial conditions for core crystallization, the manner of crystallization, the mechanisms acting in the stirring of the liquid, and the effects of elements such as sulfur on crystallization of Fe-Ni. On the basis of theoretical considerations and the published data on iron meteorites, it is suggested that the mode of crystallization in asteroid core was different from the apparent outward concentric crystallization of the earth core, in that the crystallization of asteroidal cores commenced at the base of the mantle and proceeded inward. The inward crystallization resulted in complex dendritic growth. These dendrites may have grown to lengths of hundreds of meters or perhaps even as large as the core radius, thereby dividing the core into separate magma chambers.

Haack, Henning↗
NASA NTRS1993

Numerical model for dendritic solidification of binary alloys

A finite element model capable of simulating solidification of binary alloys and the formation of freckles is presented. It uses a single system of equations to deal with the all-liquid region, the dendritic region, and the all-solid region. The dendritic region is treated as an anisotropic porous medium. The algorithm uses the bilinear isoparametric element, with a penalty function approximation and a Petrov-Galerkin formulation. Numerical simulations are shown in which an NH4Cl-H2O mixture and a Pb-Sn alloy melt are cooled. The solidification process is followed in time. Instabilities in the process can be clearly observed and the final compositions obtained.

Felicelli, S. D.↗
NASA NTRS1994

Program Computes Dendrite-Settling Velocities

DENDRIFT computer code calculates settling velocities of metal-alloy crystals of various shapes. Also calculates number of other parameters of interest such as volume and surface area of dendrite. Exploits concept of envelope around dendrite to enable calculation of effective sphericity. Program also used to estimate settling velocities of spheres and cylinders with hemispherical ends. Code useful as subprogram in comprehensive solidification/casting code. Concepts widely applicable in chemical-processing industry, helping describe settling or floating of precipitates and flocs. Written in FORTRAN 77.

De Groh, Henry, III↗
NASA NTRS1993

The influence of a microgravity environment on the dendritic morphology during directional solidification of hypoeutectic Al-Si alloys

NASA grant NAGW-2540 provided the opportunity to evaluate and extend ongoing studies of directionally solidified Al-Si alloys. Microstructural development was further characterized in terms of solidification processing parameters; novel relationships between processing and development of dendrite trunk diameters and tertiary dendrite arm spacings were found. This has resulted in three publications (one in print, one in press, and one in review). Microstructural development under conditions of controlled acceleration during directional solidification has been investigated; this has culminated in a Master's degree and will be submitted for publication. The above work not only contributes to our understanding of solidification phenomena but also defines the processing parameters for a successful microgravity experiment while providing a data base to which mu g samples can be unequivocally compared and evaluated.

Grugel, Richard N.↗
NASA NTRS2003

Dendritic Growth with Fluid Flow for Pure Materials

We have developed a three-dimensional, adaptive, parallel finite element code to examine solidification of pure materials under conditions of forced flow. We have examined the effect of undercooling, surface tension anisotropy and imposed flow velocity on the growth. The flow significantly alters the growth process, producing dendrites that grow faster, and with greater tip curvature, into the flow. The selection constant decreases slightly with flow velocity in our calculations. The results of the calculations agree well with the transport solution of Saville and Beaghton at high undercooling and high anisotropy. At low undercooling, significant deviations are found. We attribute this difference to the influence of other parts of the dendrite, removed from the tip, on the flow field.

Jeong, Jun-Ho↗
NASA NTRS1997

Isothermal Dendritic Growth Experiment (IDGE) Is the First United States Microgravity Experiment Controlled From the Principal Investigator's University

The scientific objective of the Isothermal Dendritic Growth Experiment (IDGE) is to test fundamental assumptions about dendritic solidification of molten materials. IDGE is a microgravity materials science experiment using apparatus that was designed, built, tested, and operated by people from the NASA Lewis Research Center. The IDGE experiment was conceived by the principal investigator, Professor Martin E. Glicksman from Rensselaer Polytechnic Institute in Troy, New York. This experiment was a team effort of civil servants from the NASA Lewis Research Center, contractors from Aerospace Design & Fabrication, Inc. (ADF), and personnel at Rensselaer.

Malarik, Diane C.↗
NASA NTRS2015

Primary Dendrite Arm Spacings in Al-7Si Alloy Directionally Solidified on the International Space Station

Samples from directionally solidified Al- 7 wt. % Si have been analyzed for primary dendrite arm spacing (lambda) and radial macrosegregation. The alloy was directionally solidified (DS) aboard the ISS to determine the effect of mitigating convection on lambda and macrosegregation. Samples from terrestrial DS-experiments thermal histories are discussed for comparison. In some experiments, lambda was measured in microstructures that developed during the transition from one speed to another. To represent DS in the presence of no convection, the Hunt-Lu model was used to represent diffusion controlled growth under steady-state conditions. By sectioning cross-sections throughout the entire length of a solidified sample, lambda was measured and calculated using the model. During steady-state, there was reasonable agreement between the measured and calculated lambda's in the space-grown samples. In terrestrial samples, the differences between measured and calculated lambda's indicated that the dendritic growth was influenced by convection.

Angart, Samuel↗
NASA NTRSDate not supplied

Characterization of Dendritic Spatially Extended 3D Patterns in Directional Solidification: Microgravity Experiments in DECLIC-DSI onboard ISS and 3D Phase-field Simulations

To clarify and characterize the fundamental physical mechanisms active in the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of series of experiments on transparent model alloy succinonitrile – 0.46 wt% camphor was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer the very unique opportunity to observe in situ and characterize the dynamics of the microstructure formation and evolution in extended 3D patterns under microgravity environment. The analyses of the dendritic patterns for a broad range of growth velocities displaying different levels of sidebranching will be presented. Especially, the time evolution of primary spacing, in case of solidifications at constant pulling rate as well as for experiments with pulling rate jump, will be compared to 3D phase-field simulations, and the results will be discussed in terms of stable spacing range.

Kaihua Ji↗
NASA NTRSDate not supplied

Characterization of Dendritic Spatially Extended 3D Patterns in Directional Solidification: Microgravity Experiments in DECLIC-DSI Onboard ISS and 3D Phase-field Simulations

To clarify and characterize the fundamental physical mechanisms active in the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of series of experiments on transparent model alloy succinonitrile – 0.46 wt% camphor was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer the very unique opportunity to observe in situ and characterize the dynamics of the microstructure formation and evolution in extended 3D patterns under microgravity environment. The analyses of the dendritic patterns for a broad range of growth velocities displaying different levels of sidebranching will be presented. Especially, the time evolution of primary spacing, in case of solidifications at constant pulling rate as well as for experiments with pulling rate jump, will be compared to 3D phase-field simulations, and the results will be discussed in terms of stable spacing range.

Kaihua Ji↗
DOE OSTI2023

Non‐Linear Kinetics of The Lithium Metal Anode on Li 6 PS 5 Cl at High Current Density: Dendrite Growth and the Role of Lithium Microstructure on Creep

Abstract Interfacial instability, viz., pore formation in the lithium metal anode (LMA) during discharge leading to high impedance, current focusing induced solid–electrolyte (SE) fracture during charging, and formation/behaviour of the solid–electrolyte interphase (SEI), at the anode, is one of the major hurdles in the development of solid‐state batteries (SSBs). Also, understanding cell polarization behaviour at high current density is critical to achieving the goal of fast‐charging battery and electric vehicle. Herein, via in situ electrochemical scanning electron microscopy (SEM) measurements, performed with freshly deposited lithium microelectrodes on transgranularly fractured fresh Li6PS5Cl (LPSCl), the LiǀLPSCl interface kinetics are investigated beyond the linear regime. Even at relatively small overvoltages of a few mV, the LiǀLPSCl interface shows non‐linear kinetics. The interface kinetics possibly involve multiple rate‐limiting processes, i.e., ion transport across the SEI and SE|SEI interfaces, as well as charge transfer across the LiǀSEI interface. The total polarization resistance R P of the microelectrode interface is determined to be ≈ 0.8 Ω cm 2 . It is further shown that the nanocrystalline lithium microstructure can lead to a stable LiǀSE interface via Coble creep along with uniform stripping. Also, spatially resolved lithium deposition, i.e., at grain surface flaws, grain boundaries, and flaw‐free surfaces, indicates exceptionally high mechanical endurance of flaw‐free surfaces toward cathodic load (>150 mA cm −2 ). This highlights the prominent role of surface defects in dendrite growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influence of Potassium Metal-Support Interactions on Dendrite Growth

We report combined synchrotron X-ray nanotomography imaging, cryogenic electron microscopy (cryo-EM) and modeling elucidate how potassium (K) metal-support energetics influence electrodeposit microstructure. Three model supports are employed: O-functionalized carbon cloth (potassiophilic, fully-wetted), non-functionalized cloth and Cu foil (potassiophobic, nonwetted). Nanotomography and focused ion beam (cryo-FIB) cross-sections yield complementary three-dimensional (3D) maps of cycled electrodeposits. Electrodeposit on potassiophobic support is a triphasic sponge, with fibrous dendrites covered by solid electrolyte interphase (SEI) and interspersed with nanopores (sub-10 nm to 100 nm scale). Lage cracks and voids are also a key feature. On potassiophilic support, the deposit is dense and pore-free, with uniform surface and SEI morphology. Mesoscale modeling captures the critical role of substrate-metal interaction on K metal film nucleation and growth, as well as the associated stress state.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Lithium–Metal Batteries via Suppressing Li Dendrite Growth and Improving Coulombic Efficiency

Lithium–metal batteries (LMB) are recognized as one of the most promising candidates for the next generation of batteries due to their high energy density. Extensive studies have been refocused on the field in the past decade to make the technology commercially viable. Unfortunately, despite exciting progress that has been made, the practical application of LMBs is still hampered by the uncontrollable Li plating morphology and inferior Coulombic efficiency (CE) during cycling. Herein, first, the relevant research that has been carried out in the past decade (2010–2021) is briefly summarized and then the Li plating behaviors, mechanistic understanding of these behaviors, and strategies to suppress Li dendrite growth are discussed. Finally, the methods and techniques to improve Coulombic efficiency (CE) is discussed, especially the design of liquid electrolytes, and possible research directions for the future development of LMBs.

25 ENERGY STORAGE↗