Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

First Observation of D 0 – D ¯ 0 Oscillations in D 0 → K + π – π + π – Decays and Measurement of the Associated Coherence Parameters

Charm meson oscillations are observed in a time-dependent analysis of the ratio of D 0 → K + π – π + π – to D 0 → K – π + π – π + decay rates, using data corresponding to an integrated luminosity of 3.0 fb –1 recorded by the LHCb experiment. The measurements presented are sensitive to the phase-space averaged ratio of doubly Cabibbo-suppressed to Cabibbo-favored amplitudes r K3π D and the product of the coherence factor R K3π D and a charm mixing parameter y' K3π . The constraints measured are r K3π D = (5.67 ± 0.12) × 10 –2 , which is the most precise determination to date, and R K3π D y'K 3π = (0.3 ± 1.8) × 10 –3 , which provides useful input for determinations of the CP-violating phase γ in B ± → DK ± , D → K ∓ π ± π ∓ π ± decays. The analysis also gives the most precise measurement of the D 0 → K + π – π + π – branching fraction, and the first observation of D 0 – D ¯ 0 oscillations in this decay mode, with a significance of 8.2 standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of C P Violation in B 0 → D + D – Decays

The CP violation observables S and C in the decay channel B 0 →D + D – are determined from a sample of proton-proton collisions at center-of-mass energies of 7 and 8 TeV, collected by the LHCb experiment and corresponding to an integrated luminosity of 3 fb –1 . The observable S describes CP violation in the interference between mixing and the decay amplitude, and C parametrizes direct CP violation in the decay. The following values are obtained from a flavor-tagged, decay-time-dependent analysis: S = –0.54 +0.17 –0.16 (stat)±0.05(syst), C = 0.26 +0.18 –0.17 (stat)±0.02(syst). These values provide evidence for CP violation at a significance level of 4.0 standard deviations. The phase shift due to higher-order standard model corrections is constrained to a small value of ΔΦ = –0.16 +0.19 –0.21 rad.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Experimental Study of Photon Polarization in Radiative B s 0 Decays

The polarization of photons produced in radiative B 0 s decays is studied for the first time. The data are recorded by the LHCb experiment in pp collisions corresponding to an integrated luminosity of 3 fb –1 at center-of-mass energies of 7 and 8 TeV. A time-dependent analysis of the B 0 s →Φγ decay rate is conducted to determine the parameter A Δ , which is related to the ratio of right- over left-handed photon polarization amplitudes in b→sγ transitions. A value of A Δ = –0.98 +0.46 –0.52 +0.23 –0.20 is measured. This result is consistent with the standard model prediction within 2 standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Strong Evidence for Nucleon Resonances near 1900 MeV

Data on the reaction yp→K + A from the CLAS experiments are used to derive the leading multipoles, E 0+ , M 1- , E 1+ , and M 1+ , from the production threshold to 2180 MeV in 24 slices of the invariant mass. The four multipoles are determined without any constraints. The multipoles are fitted using a multichannel L+P model that allows us to search for singularities and to extract the positions of poles on the complex energy plane in an almost model-independent method. The multipoles are also used as additional constraints in an energy-dependent analysis of a large body of pion and photoinduced reactions within the Bonn-Gatchina partial wave analysis. The study confirms the existence of poles due to nucleon resonances with spin parity J P =1/2 - , 1/2 + , and 3/2 + in the region at about 1.9 GeV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interpretable machine learning-guided design of Fe-based soft magnetic alloys

Here, we present a machine learning (ML) guided approach to predict saturation magnetization (𝑀 S ) and coercivity (𝐻 C ) in Fe-rich soft magnetic alloys, particularly Fe-Si-B systems. ML models trained on experimental data reveal that increasing Si and B content reduces 𝑀 S from 1.81 T (DFT ≈ 2.04 T) to ≈1.54 T (DFT ≈ 1.56T) in Fe-Si-B, which is attributed to decreased magnetic density and structural modifications. Experimental validation of ML predicted magnetic saturation on Fe-1Si-1B (2.09 T), Fe-5Si-5B (2.01 T), and Fe-10Si-10B (1.54 T) alloy compositions further supports our findings. These trends are consistent with density functional theory predictions, which link increased electronic disorder and band broadening to lower 𝑀 S values. Experimental validation on selected alloys confirms the predictive accuracy of the ML model, with good agreement across compositions. Beyond predictive accuracy, detailed uncertainty quantification and model interpretability including through feature importance and partial dependence analysis reveal that 𝑀 S is governed by a nonlinear interplay between Fe content and early transition metal ratios, while 𝐻 C is more sensitive to processing conditions such as ribbon thickness and thermal treatment windows. The ML framework was further applied to Fe-Si-B/Cr/Cu/Zr/Nb alloys in a pseudoquaternary compositional space, which shows comparable magnetic properties to NANOMET (Fe 84.8 ⁢Si 0.5 ⁢B 9.4 ⁢Cu 0.8⁢ P 3.5 ⁢C 1 ), FINEMET (Fe 73.5 ⁢Si 13.5 ⁢B 9 Cu 1 ⁢Nb 3 ), NANOPERM (Fe 88 ⁢Zr 7⁢ B 4 ⁢Cu 1 ), and HITPERM (Fe 44 ⁢Co 44 ⁢Zr 7⁢ B 4 ⁢Cu 1 . Our findings demonstrate the potential of the ML framework for accelerated search of high-performance soft magnetic materials.

density functional theory↗

Snowflake: A Lightweight Portable Stencil DSL

Stencil computations are not well optimized by general-purpose production compilers and the increased use of multicore, manycore, and accelerator-based systems makes the optimization problem even more challenging. In this paper we present Snowflake, a Domain Specific Language (DSL) for stencils that uses a 'micro-compiler' approach, i.e., small, focused, domain-specific code generators. The approach is similar to that used in image processing stencils, but Snowflake handles the much more complex stencils that arise in scientific computing, including complex boundary conditions, higher-order operators (larger stencils), higher dimensions, variable coefficients, non-unit-stride iteration spaces, and multiple input or output meshes. Snowflake is embedded in the Python language, allowing it to interoperate with popular scientific tools like SciPy and iPython; it also takes advantage of built-in Python libraries for powerful dependence analysis as part of a just-in-time compiler. We demonstrate the power of the Snowflake language and the micro-compiler approach with a complex scientific benchmark, HPGMG, that exercises the generality of stencil support in Snowflake. By generating OpenMP comparable to, and OpenCL within a factor of 2x of hand-optimized HPGMG, Snowflake demonstrates that a micro-compiler can support diverse processor architectures and is performance-competitive whilst preserving a high-level Python implementation.

97 MATHEMATICS AND COMPUTING↗

Benchmarking Variables for Checkpointing in HPC Applications

Checkpoint/Restart (C/R) is a widely used fault tolerance mechanism in converged systems of cloud, edge, and HPC. However, users often rely on their experience to determine which variables to checkpoint, as there is currently no benchmark that can provide a reference. This can result in checkpointing redundant or even incorrect variables. To address this issue, we propose a benchmark suite that includes critical variables for checkpointing, which have been manually identified, and a method for identifying those critical variables, with 20 representative HPC applications. Our method involves analyzing data dependency between variables to identify critical variables analytically. We verify the identified variables' correctness with a widely used C/R library FTI by an ablation study. With our benchmark suite and data dependency analysis, HPC practitioners now have a reference for identifying checkpointing variables and better knowledge of what kind of variables to checkpoint.

Fu, Xiang↗

Ambipolar Transport in Polycrystalline GeSn Transistors for Complementary Metal-Oxide-Semiconductor Applications

Group-IV alloy GeSn is a promising material for electronic and optoelectronic applications due to its compatibility with both Si substrates and established Si fabrication processes. This study focuses on polycrystalline GeSn (10% Sn), which offers a cost-effective, large-area, and versatile alternative to epitaxial GeSn. We demonstrate ambipolar transport behavior in polycrystalline GeSn thin film transistors, achieving electron and hole field-effect mobilities reaching up to 0.05 cm 2 /Vs and 2.05 cm 2 /Vs, respectively. Through temperature-dependent analysis, we elucidate the underlying mechanism of this phenomenon, which we attribute to quantum tunneling between the Schottky barrier contact and the channel, as well as potential barriers between the grain boundaries of this polycrystalline film, thereby advancing the understanding of polycrystalline GeSn's electrical properties. Furthermore, this work highlights the potential of ambipolar transport as a technique to employ towards the development of GeSn complementary metal-oxide-semiconductor field-effect transistors, promising to simplify and reduce the cost of GeSn manufacturing processes for edge computing and sensing applications.

42 ENGINEERING↗

Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at $\sqrt{s} =$ 13 TeV

The rate for Higgs (${\mathrm{H}} $) bosons production in association with either one (${\mathrm{t}} {\mathrm{H}} $) or two (${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $) top quarks is measured in final states containing multiple electrons, muons, or tau leptons decaying to hadrons and a neutrino, using proton–proton collisions recorded at a center-of-mass energy of $13\,\text {Te}\text {V} $ by the CMS experiment. The analyzed data correspond to an integrated luminosity of 137$\,\text {fb}^{-1}$. The analysis is aimed at events that contain ${\mathrm{H}} \rightarrow {\mathrm{W}} {\mathrm{W}} $, ${\mathrm{H}} \rightarrow {\tau } {\tau } $, or ${\mathrm{H}} \rightarrow {\mathrm{Z}} {\mathrm{Z}} $ decays and each of the top quark(s) decays either to lepton+jets or all-jet channels. Sensitivity to signal is maximized by including ten signatures in the analysis, depending on the lepton multiplicity. The separation among ${\mathrm{t}} {\mathrm{H}} $, ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $, and the backgrounds is enhanced through machine-learning techniques and matrix-element methods. The measured production rates for the ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $ and ${\mathrm{t}} {\mathrm{H}} $ signals correspond to $0.92 \pm 0.19\,\text {(stat)} ^{+0.17}_{-0.13}\,\text {(syst)} $ and $5.7 \pm 2.7\,\text {(stat)} \pm 3.0\,\text {(syst)} $ of their respective standard model (SM) expectations. The corresponding observed (expected) significance amounts to 4.7 (5.2) standard deviations for ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $, and to 1.4 (0.3) for ${\mathrm{t}} {\mathrm{H}} $ production. Assuming that the Higgs boson coupling to the tau lepton is equal in strength to its expectation in the SM, the coupling $y_{{\mathrm{t}}}$ of the Higgs boson to the top quark divided by its SM expectation, $\kappa _{{\mathrm{t}}}=y_{{\mathrm{t}}}/y_{{\mathrm{t}}}^{\mathrm {SM}}$, is constrained to be within $-0.9< \kappa _{{\mathrm{t}}}< -0.7$ or $0.7< \kappa _{{\mathrm{t}}}< 1.1$, at 95% confidence level. This result is the most sensitive measurement of the ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $ production rate to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Continued Research for Improvement of PROTEUS-SN

Over the past several years, the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program of U.S. DOE has focused on developing a neutronics component as part of a larger dynamics product meant to analyze both existing and proposed nuclear reactor systems. The goal is to reduce the uncertainties and biases in reactor design activities by providing enhanced prediction capabilities. As part of the SHARP program, we have invested considerable effort into creating the PROTEUS-SN code. The PROTEUS-SN solver was intended to treat conventional homogenized assembly to explicit geometry schemes for time dependent analysis with coupled thermal-hydraulics and structural mechanics.

Smith, M. A.↗

An Assessment of Critical Dimension Small Angle X-ray Scattering Metrology for Advanced Semiconductor Manufacturing

Simultaneous migration of planar transistors to FinFET architectures, the introduction of a plurality of materials to ensure suitable electrical characteristics, and the establishment of reliable multiple patterning lithography schemes to pattern sub-10 nm feature sizes imposes formidable challenges to current in-line dimensional metrologies. Because the shape of a FinFET channel cross-section immediately influences the electrical characteristics, the evaluation of 3D device structures requires measurement of parameters beyond traditional critical dimension (CD), including their sidewall angles, top corner rounding and footing, roughness, recesses and undercuts at single nanometer dimensions; thus, metrologies require sub-nm and approaching atomic level measurement uncertainty. Synchrotron critical dimension small angle X-ray scattering (CD-SAXS) has unique capabilities to non-destructively monitor the cross-section shape of surface structures with single nanometer uncertainty and can perform overlay metrology to sub-nm uncertainty. In this dissertation, we perform a systematic experimental investigation using CD-SAXS metrology on a hierarchy of semiconductor 3D device architectures including, high-aspect-ratio contact holes, H2 annealed Si fins, and a series of grating type samples at multiple points along a FinFET fabrication process increasing in structural intricacy and ending with fully fabricated FinFET. Comparative studies between CD-SAXS metrology and other relevant semiconductor dimensional metrologies, particularly CDSEM, CD-AFM and TEM are used to determine physical limits of CD-SAXS approach for advanced semiconductor samples. CD-SAXS experimental tradeoffs, advice for model-dependent analysis and thoughts on the compatibility with a semiconductor manufacturing environment are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Laser Powder Bed Fusion Additive Manufacturing In-Process Monitoring and Optimization Using Thermionic Emission Detection

In this project, the emission of electrons during laser powder bed fusion additive manufacturing was identified and investigated to resolve the underlying dynamics driven by laser-material interactions. Laser powder bed fusion involves the selective laser melting of metal powder particles layer by layer which fuse together forming a larger 3D structure. Laser-based additive manufacturing approaches such as laser powder bed fusion hold the potential to revolutionize manufacturing of complex metal components in the aerospace, medical, and automotive industries. However, the difficulty in producing defect-free components by metal 3D printing is a major hurdle for widespread commercial adoption. This project resolved important dynamics in laser powder bed fusion including the identification of plasma formation mechanisms, transitions between laser-induced melting modes and stochastic precursors to defect formation. These findings were realized through implementation of electronic sensing diagnostics into an existing testbed system and harnessing capabilities developed for the time dependent analysis of laser powder bed fusion datasets. Importantly, the results advance our understanding of laser-material interactions and reveal that detection of thermionic emission can also resolve information critical to optimization of the laser powder bed fusion fabrication process. The findings are critical for advancing our fundamental understanding of the laser powder bed fusion process and can help assure the requisite fidelity of fabricated components.

36 MATERIALS SCIENCE↗

Concerning the origin of novae and U Geminorum stars

The dynamical stability of the contact component in a semi-detached binary system is investigated by a linear time dependent analysis. The boundary condition imposed on the photosphere by the Roche lobe is assumed to be one of constant pressure over the whole surface of the lobe, which is treated as being spherically symmetric. The eigenvalues of the linear equation of motion are evaluated for sequences of stellar envelope models under the constraint of this boundary condition. An extensive region in the Hertzprung-Russell diagram is found to be dynamically unstable. This region coincides almost precisely with that predicted by a previous quasi-static study. Time scales for the growth of the instability are also evaluated. Color observations of several novae and U Geminorum stars are discussed in an attempt to provide semi-empirical tests of the proposed theoretical model of the outbursts. In particular the track in the H-R diagram of the U Geminorum star, EM Cygni, is shown to be consistent with an outburst which is purely a temperature change at constant radius, as is demanded by the theory.

Bath, G. T.↗

Time-dependent difference theory for noise propagation in a two-dimensional duct

A time dependent numerical formulation was derived for sound propagation in a two dimensional straight soft-walled duct in the absence of mean flow. The time dependent governing acoustic-difference equations and boundary conditions were developed along with the maximum stable time increment. Example calculations were presented for sound attenuation in hard and soft wall ducts. The time dependent analysis were found to be superior to the conventional steady numerical analysis because of much shorter solution times and the elimination of matrix storage requirements.

Baumeister, K. J.↗

Time-dependent difference theory for noise propagation in a two-dimensional duct

A time-dependent numerical formulation is derived for sound propagation in a two-dimensional straight soft-walled duct in the absence of mean flow. The time-dependent governing acoustic-difference equations and boundary conditions are developed along with the maximum stable time increment. Example calculations are presented for sound attenuation in hard- and soft-wall ducts. The time-dependent analysis has been found to be superior to the conventional steady numerical analysis because of much shorter solution times and the elimination of matrix storage requirements.

Baumeister, K. J.↗

A search for large-scale convection cells in the solar atmosphere

Mount Wilson magnetograph velocity observations are used to search for east-west motions resulting from hypothetical cellular patterns extending over one or two hemispheres in the latitude direction. No such solar patterns were found. Upper limits established by this analysis depend on the cell lifetime and the pattern stability, but in all cases they are no more than about 10 m/s.

Howard, R.↗

The life cycle of thunderstorm gust fronts as viewed with Doppler radar and rawinsonde data

This paper presents the time-dependent analysis of the thunderstorm gust front with the use of Project NIMROD data. RHI cross sections of reflectivity and Doppler velocity are constructed to determine the entire vertical structure. The life cycle of the gust front is divided into four stages: (1) the formative stage; (2) the early mature stage; (3) the late mature stage; and (4) the dissipation stage. A new finding is a horizontal roll detected in the reflectivity pattern resulting from airflow that is deflected upward by the ground, while carrying some of the smaller precipitation ahead of the main echo core of the squall line. This feature is called a 'precipitation roll'. As determined from rawinsonde data, the cold air behind the gust front accounts for the observed surface pressure rise. Calculations confirm that the collision of two fluids produce a nonhydrostatic pressure at the leading edge of the outflow. The equation governing the propagation speed of a density current accurately predicts the movement of the gust front.

Wakimoto, R. M.↗