Search NASA⌕ Search

SEARCH · Search NASA

Results for “developable planes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A Revisit to the Notation of Martensitic Crystallography

As one of the most successful crystallographic theories for phase transformations, martensitic crystallography has been widely applied in understanding and predicting the microstructural features associated with structural phase transformations. In a narrow sense, it was initially developed based on the concepts of lattice correspondence and invariant plane strain condition, which is formulated in a continuum form through linear algebra. However, the scope of martensitic crystallography has since been extended; for example, group theory and graph theory have been introduced to capture the crystallographic phenomena originating from lattice discreteness. In order to establish a general and rigorous theoretical framework, we suggest a new notation system for martensitic crystallography. The new notation system combines the original formulation of martensitic crystallography and Dirac notation, which provides a concise and flexible way to understand the crystallographic nature of martensitic transformations with a potential extensionality. A number of key results in martensitic crystallography are reexamined and generalized through the new notation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

MAGNETIC DIAGNOSTICS OF THE SOLAR CHROMOSPHERE WITH THE Mg II h–k LINES

We investigated the formation of the Mg ii h–k doublet in a weakly magnetized atmosphere (20–100 G) using a newly developed numerical code for polarized radiative transfer in a plane-parallel geometry, which implements a recent formulation of partially coherent scattering by polarized multi-term atoms in arbitrary magnetic-field regimes. Our results confirm the importance of partial redistribution effects in the formation of the Mg ii h and k lines, as pointed out by previous work in the non-magnetic case. We show that the presence of a magnetic field can produce measurable modifications of the broadband linear polarization even for relatively small field strengths (∼10 G), while the circular polarization remains well represented by the classical magnetograph formula. Both these results open an important new window for the weak-field diagnostics of the upper solar atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The revised FLORIDyn model: implementation of heterogeneous flow and the Gaussian wake

In this paper, a new version of the FLOw Redirection and Induction Dynamics (FLORIDyn) model is presented. The new model uses the three-dimensional parametric Gaussian FLORIS model and can provide dynamic wind farm simulations at a low computational cost under heterogeneous and changing wind conditions. Both FLORIS and FLORIDyn are parametric models which can be used to simulate wind farms, evaluate controller performance and can serve as a control-oriented model. One central element in which they differ is in their representation of flow dynamics: FLORIS neglects these and provides a computationally very cheap approximation of the mean wind farm flow. FLORIDyn defines a framework which utilizes this low computational cost of FLORIS to simulate basic wake dynamics. This is achieved by creating so-called observation points (OPs) at each time step at the rotor plane which inherit the turbine state. In this work, we develop the initial FLORIDyn framework further considering multiple aspects. The underlying FLORIS wake model is replaced by a Gaussian wake model. The distribution and characteristics of the OPs are adapted to account for the new parametric model but also to take complex flow conditions into account. To achieve this, a mathematical approach is developed to combine the parametric model and the changing, heterogeneous world conditions and link them with each OP. We also present a computationally lightweight wind field model to allow for a simulation environment in which heterogeneous flow conditions are possible. FLORIDyn is compared to Simulator for Offshore Wind Farm Applications (SOWFA) simulations in three- and nine-turbine cases under static and changing environmental conditions. The results show a good agreement with the timing of the impact of upstream state changes on downstream turbines. They also show a good agreement in terms of how wakes are displaced by wind direction changes and when the resulting velocity deficit is experienced by downstream turbines. A good fit of the mean generated power is ensured by the underlying FLORIS model. In the three-turbine case, FLORIDyn simulates 4 s simulation time in 24.49 ms computational time. The resulting new FLORIDyn model proves to be a computationally attractive and capable tool for model-based dynamic wind farm control.

17 WIND ENERGY↗
DOE OSTI2022

In-plane and out-of-plane optical response of the nodal-line semimetals ZrGeS and ZrGeSe

Polarization-dependent reflectivity measurements were carried out over a broad frequency range on single-crystalline ZrGeSe and ZrGeS compounds, which are closely related to the prototype nodal-line semimetal ZrSiS. These measurements revealed the strongly anisotropic character of both ZrGeSe and ZrGeS, with a reduced plasma frequency for the out-of-plane direction E∥c as compared with the in-plane direction E ∥ ab. For E ∥ ab, the optical conductivity spectrum consists of two Drude terms followed by a shoulder or plateaulike behavior and a distinct U shape at higher energies, while for E ∥ c, one Drude term is followed by a peaklike behavior, and the U shape of the profile is less developed. Under external pressure, two prominent excitations appear in the out-of-plane optical conductivity spectrum of ZrGeSe, whose frequency position and oscillator strength show a weak anomaly at ~3 GPa. Overall, the pressure-induced changes in the profile of the E∥c conductivity spectrum are much enhanced >~3 GPa. We compare our results to those recently reported for ZrSiS in a quantitative manner.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Image-based pupil plane characterization via a space-domain basis

© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE). Aberration characterization plays a critical role in the development of any optical system. State-of-the-art lithography systems have the tightest aberration tolerances. We present an approach to image-based pupil plane amplitude and phase characterization using models built with a space-domain basis, in which aberration effects are separable. A polynomial model is constructed between the projections of the image intensity for chosen binary mask targets onto this basis and pupil amplitude or phase variation. This method separates model building and pupil characterization into two distinct steps, thus enabling rapid pupil characterization following data collection. The basis is related to both the transmission cross-coefficient function and the principal components of the image intensity. The pupil plane variation of a zone-plate lens from the Semiconductor High-NA Actinic Reticle Review Project (SHARP) at Lawrence Berkeley National Laboratory is examined using this method. Results are compared to pupil plane characterization using a previously proposed methodology where inverse solutions are obtained through an iterative process involving least-squares regression.

Levinson, Zac↗
DOE OSTI2016

Redshift-space distortions with wide angular separations

Redshift-space distortions are generally considered in the plane parallel limit, where the angular separation between the two sources can be neglected. Given that galaxy catalogues now cover large fractions of the sky, it becomes necessary to consider them in a formalism which takes into account the wide angle separations. In this article we derive an operational formula for the matter correlators in the Newtonian limit to be used in actual data sets. In order to describe the geometrical nature of the wide angle RSD effect on Fourier space, we extend the formalism developed in configuration space to Fourier space without relying on a plane-parallel approximation, but under the extra assumption of no bias evolution. We then recover the plane-parallel limit not only in configuration space where the geometry is simpler, but also in Fourier space, and we exhibit the first corrections that should be included in large surveys as a perturbative expansion over the plane-parallel results. We finally compare our results to existing literature, and show explicitly how they are related.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Three-Dimensional Modeling of Fracture Clusters in Geothermal Reservoirs

The objective of this is to develop a 3-D numerical model for simulating mode I, II, and III (tensile, shear, and out-of-plane) propagation of multiple fractures and fracture clusters to accurately predict geothermal reservoir stimulation using the virtual multi-dimensional internal bond (VMIB). Effective development of enhanced geothermal systems can significantly benefit from improved modeling of hydraulic fracturing. In geothermal reservoirs, where the temperature can reach or exceed 350oC, thermal and poro-mechanical processes play an important role in fracture initiation and propagation. In this project hydraulic fracturing of hot subsurface rock mass will be numerically modeled by extending the virtual multiple internal bond theory and implementing it in a finite element code, WARP3D, a three-dimensional finite element code for solid mechanics. The new constitutive model along with the poro-thermoelastic computational algorithms will allow modeling the initiation and propagation of clusters of fractures, and extension of pre-existing fractures. The work will enable the industry to realistically model stimulation of geothermal reservoirs. The project addresses the Geothermal Technologies Office objective of accurately predicting geothermal reservoir stimulation (GTO technology priority item). The project goal will be attained by: (i) development of the VMIB method for application to 3D analysis of fracture clusters; (ii) development of poro- and thermoelastic material sub-routines for use in 3D finite element code WARP3D; (iii) implementation of VMIB and the new material routines in WARP3D to enable simulation of clusters of fractures while accounting for the effects of the pore pressure, thermal stress and inelastic deformation; (iv) simulation of 3D fracture propagation and coalescence and formation of clusters, and comparison with laboratory compression tests; and (v) application of the model to interpretation of injection experiments (planned by our industrial partner) with reference to the impact of the variations in injection rate and temperature, rock properties, and in-situ stress.

15 GEOTHERMAL ENERGY↗
DOE OSTI2019

Performance improvement of proton exchange membrane electrolyzer cells by introducing in-plane transport enhancement layers

Thin/tunable liquid/gas diffusion layers (TT-LGDLs) or porous transport layers (TT-PTLs), have exhibited superior multifunctional performance in proton exchange membrane electrolyzer cells (PEMECs), which can be attributed to their unique structures, such as planar surface, straight-through pores, thin thickness, etc. For achieving better PEMEC performance, TT-LGDLs with smaller pore size are desired. However, in this case, mass diffusion issues are brought in when some of the pores are covered by the flow field lands or shoulders. The coverage of the pores can lead to very high transport resistance, which may reduce the number of active oxygen evolution reaction sites, and therefore lower down the PEMEC performance. The in-plane transport enhancement layer for TT-LGDLs/PTLs are proposed to develop a dual-layer LGDL/PTL structure for improving the mass diffusion and the PEMEC performance. The results of this research reveal that the dual-layer LGDL/PTL structure exhibits smaller ohmic resistance and mass transport resistance, and therefore improve the PEMEC performance, without obvious changes in kinetic losses. The total ohmic resistance and mass transport resistance can be reduced by about 23% and 41%, respectively, with an ~830 um pore TT-LGDL/PTL stacking on a ~100 um pore TT-LGDL/PTL. The results indicate the feasibility of stacking the in-plane transport enhancement layer with large pore sizes onto a small pore TT-LGDLs/PTLs for high efficiency and low cost PEMEC practical applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Dissipative and fast-timescale phenomena in superconductors

This project explored new effects and regimes that unfold in superconductors as they are pushed to ex treme and unprecedented conditions of electric field, power densities, vortex velocities, etc. Besides their own novelty, these phenomena yield fundamental in formation about the superconducting state and its parameters, as well as its practical limits for techno logical applications. Furthermore some of these ef fects (such as formation of phase slip processes and the acceleration of superfluid) are time dependent on time scales such as quasiparticle-phonon energy re laxation and gap relaxation. This project used fast low-duty-cycle pulsed signals to first of all access these regimes without excessive heating and secondly to observe directly in the time domain the temporal unfolding of these phenomena on nanosecond time scales. This project led to the discovery of new effects in the transport behavior in superconductors, provided new information on fundamental parameters, and helped establish intrinsic strengths and limitations of different superconducting materials for ap plications. The primary tools developed for extending the range of measurable dissipation densities and observation of short time-scale phenomena were fast pulsed-current and pulsed-voltage sources, and fast high-CM-rejection detection circuitry. This allowed conducting measurements at power densities in the 10 10 W/cm 3 range, and at E ~ 1 kV/cm and v Φ ~10 km/s. Also developed was the ability to simultaneously track current I(t) and voltage V (t) and cross correlate them with sub-nanosecond temporal resolution. A recent angle of this project was the exploration of subtle phenomena at low current densities, especially for the magnetic field orientation parallel to the plane of the films. Through modifications of the pulsed tube closed cycle cryostat, we developed methods for attaining low-noise and high temperature-stability conditions. This led to the observation of novel dimensional effects related to the mixed state and vortex matter, and to a new type of magnetoresistance oscillation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Broadband anti-reflective coatings for cosmic microwave background experiments

The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to ~700 mm diameter) and lenslets (~5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetra uoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Predicting Fracture Network Development in Crystalline Rocks

The geometric properties of fractures influence whether they propagate, arrest, or coalesce with other fractures. Thus, quantifying the relationship between fracture network characteristics may help predict fracture network development, and perhaps precursors to catastrophic failure. To constrain the relationship and predictability of fracture characteristics, we deform eight one centimeter tall rock cores under triaxial compression while acquiring in situ X-ray tomograms. The tomograms reveal precise measurements of the fracture network characteristics above the spatial resolution of 6.5 µm. We develop machine learning models to predict the value of each characteristic using the other characteristics, and excluding the macroscopic stress or strain imposed on the rock. The models predict fracture development more accurately in the experiments performed on granite and monzonite, than the experiments on marble. Fracture network development may be more predictable in these igneous rocks because their microstructure is more mechanically homogeneous than the marble, producing more systematic fracture development that is not strongly impeded by grain contacts and cleavage planes. The varying performance of the models suggest that fracture volume, length, and aperture are the most predictable of the characteristics, while fracture orientation is the least predictable. Orientation does not correlate with length, as suggested by the idea that the orientation evolves with increasing differential stress and thus fracture length. This difference between the observed and expected relationship between orientation and length highlights the influence of mechanical heterogeneities and local stress perturbations on fracture growth as fractures propagate, link, and coalesce.

58 GEOSCIENCES↗
DOE OSTI2021

Effect of neighboring grain orientation on strain localization in slip bands in HCP materials

Particularly in plastically anisotropic crystals, such as hexagonal close packed (HCP) materials, plastic deformation is realized by slip acting in the small volumes within individual crystals. Here we extend a full field fast Fourier transform (FFT)-based elasto-viscoplastic formulation to simulate the development of a single slip band on either prismatic or basal planes spanning a crystal. Calculations of the strain and stress fields induced locally within the band and parent crystal, and ahead of the band/grain boundary junction in the neighboring crystal are analyzed as the slip band intensifies under increasing applied strain. We report a substantial influence of the crystallographic orientation of the nearest neighboring grain on the rate of slip band localization. Performing the analysis on two materials, CP-Ti and Mg, indicates that the strength of the material affects the rate of localization, with stronger materials tending to localize more easily. A slip band tip stress-based criterion is proposed for identifying the nearest neighbor orientations in which slip band transmission is possible and the likely slip system for which it occurs. This indicator is validated against experimental studies on commercially pure Ti, an Mg–Y alloy, and Ti–6Al–4V. Finally, we show that for low GB misorientations, the slip band is likely to transmit into another slip band of the same type in the neighbor grain, while for high GB misorientations, it is likely to transmit into one of a different type or to not transmit at all.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Free surface effects on the recrystallization of compressed, stable, Al-Mn single crystals

Highlights: • The free surface provokes high frequency nucleation. • The free surface and surface ‘quality’ do not modify the orientations of the recrystallized grains. • The misorientation relations across recrystallization front are similar for all sections of both orientations. The free surface effect on the grain crystallography and morphology during recrystallization has been studied in stable Goss {110}001 and brass {110}112 - oriented single crystals of Al-1%wt.Mn alloy. The samples were plane strain compressed up to a strain of about 0.5 to develop a homogeneous structure comprising two sets of symmetrical microbands and then lightly annealed. The variation of recrystallization after annealing was then analysed by optical microscopy and SEM/EBSD on different cross-sections. The results are discussed in terms of the misorientation angle and axis distributions. The free surface provokes high frequency nucleation leading to a small grain size compared to internal sections of the bulk sample. However, the free surface and surface ‘quality’ do not modify the orientations of the recrystallized grains, i.e. similar groups of recrystallized grain orientations were observed for all sections. This leads to a strong misorientation relation between deformed/recovered area orientations and the limited number of groups of recrystallized grain orientations, basically the same as those observed during bulk recrystallization of similar crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Fast Algorithm for Scanning Transmission Electron Microscopy Imaging and 4D-STEM Diffraction Simulations

Scanning transmission electron microscopy (STEM) is an extremely versatile method for studying materials on the atomic scale. Many STEM experiments are supported or validated with electron scattering simulations. However, using the conventional multislice algorithm to perform these simulations can require extremely large calculation times, particularly for experiments with millions of probe positions as each probe position must be simulated independently. Recently, the plane-wave reciprocal-space interpolated scattering matrix (PRISM) algorithm was developed to reduce calculation times for large STEM simulations. Here, we introduce a new method for STEM simulation: partitioning of the STEM probe into “beamlets,” given by a natural neighbor interpolation of the parent beams. This idea is compatible with PRISM simulations and can lead to even larger improvements in simulation time, as well requiring significantly less computer random access memory (RAM). We have performed various simulations to demonstrate the advantages and disadvantages of partitioned PRISM STEM simulations. We find that this new algorithm is particularly useful for 4D-STEM simulations of large fields of view. We also provide a reference implementation of the multislice, PRISM, and partitioned PRISM algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Crystallographic analysis of the solid-state dewetting of polycrystalline gold film using automated indexing in a transmission electron microscope

We analyzed the effect of crystallographic anisotropy on the morphological evolution of a 12-nm-thick gold film during solid-state dewetting at high temperatures using automated indexing tool in a transmission electron microscopy. Dewetting initiated at grain-boundary triple junctions adjacent to large grains resulting from abnormal grain growth driven by (111) texture development. Voids at the junctions developed shapes with faceted edges bounded by low-index crystal planes. The kinetic mobility of the edges varied with the crystal orientation normal to the edges, with a predominance of specific edges with the slowest retraction rates as the annealing time was increased.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Strain profiles in ion implanted ceramic polycrystals: An approach based on reciprocal-space crystal selection

The determination of the state of strain in implanted materials is a key issue in the study of their mechanical stability. Whereas this question is nowadays relatively easily solved in the case of single crystals, it remains a challenging task in the case of polycrystalline materials. In this paper, we take benefit of the intense and parallel beams provided by third generation synchrotron sources combined with a two-dimensional detection system to analyze individual grains in polycrystals, hence obtaining “single crystal-like” data. The feasibility of the approach is demonstrated with implanted UO{sub 2} polycrystals where the in-depth strain profile is extracted for individual grains using numerical simulations of the diffracted signal. The influence of the implantation dose is precisely analyzed for several diffracting planes and grains. This work suggests that, at low fluences, the development of strain is mainly due to ballistic effects with little effect from He ions, independently from the crystallographic orientation. At higher fluences, the evolution of the strain profiles suggests a partial and anisotropic plastic relaxation. With the present approach, robust and reliable structural information can be obtained, even from complex polycrystalline ceramic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

(110)-Oriented GaAs Devices and Spalling as a Platform for Low-Cost III-V Photovoltaics

Here, we demonstrate the growth of GaAs solar cells by hydride vapor phase epitaxy (HVPE) on epi-ready and previously spalled (110) GaAs wafers as an advance towards a potentially low-cost (110)-based device platform. Controlled spalling offers a fracture-based path to substrate cost amortization, enabling device exfoliation and substrate reuse, but the faceted surface generated during the spalling of (100)-oriented GaAs presents hurdles to direct regrowth of subsequent devices. Spalling of (110) substrates instead eliminates faceting by aligning the substrate surface with the predominant crystal cleavage plane. III-V epitaxy of solar cells is significantly less developed on (110)-oriented substrates, however. Here, we develop (110)-based GaAs solar cells grown by HVPE on epi-ready substrates, demonstrating equal performance to devices grown on the more standard (100) orientation. We also characterize the surface of spalled, (110)-oriented substrates, revealing flat terraces separated by steps with sub-micron-scale height on average. Finally, we present an initial device grown on a previously spalled surface without additional surface re-preparation with nearly 16% efficiency under a simulated AM1.5G spectrum. Together, these results provide preliminary evidence of a potentially low-cost path to enable terrestrial III-V photovoltaics via the (110) substrate orientation.

14 SOLAR ENERGY↗