Search NASA⌕ Search

SEARCH · Search NASA

Results for “development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Implications of climate change impacts for emission and land use scenario development

Scenarios of future emissions and land use produced by integrated assessment models have traditionally been developed without accounting for how climate change impacts could affect the emissions and land use trajectories themselves. This omission risks skewing our assessments of the plausible range of future emission pathways and associated Earth system changes. Beyond the salience for emission scenario development, a better integrated representation of human and Earth system changes and feedbacks would enable better anticipation of the implications of alternative socio-economic development pathways. We use the Global Change Analysis Model to investigate whether endogenizing several impacts when generating its baseline emission scenario is warranted. We do so by comparing the emissions and land use change that result from the baseline scenario with and without impacts, where impacts are implemented as exogenous changes to water availability, crop and labor productivity, and energy demand and supply. Our results indicate that the effect on global emissions leads to less than 0.1 °C increase in warming by 2100 and therefore do not support endogenizing impacts. This conclusion is conditional on our modeling framework and the specific impact channels represented but is consistent with other studies that have addressed the magnitude of feedbacks by implementing a two-way coupling. However, we do find regional impacts indicating that local economies and well-being measures may be affected significantly.

climate impacts↗
DOE OSTI2024

Source apportionment of airborne volatile organic compounds near unconventional oil and gas development

Oil and natural gas (ONG) extraction emits volatile organic compounds (VOCs). Certain VOCs are identified as hazardous air pollutants (HAPS) while others contribute to ozone formation. This study examines the impact of ONG operations on VOC levels during the development of multi-well ONG pads in suburban Broomfield, Colorado. From October 2018 to December 2020, weekly VOC measurements were taken at 18 sites across the area. These included spots near well pads, in adjacent neighborhoods, and at a background site, covering various stages of well pad development including drilling, hydraulic fracturing, flowback, and production. Analysis using Positive Matrix Factorization (PMF) identified six factors, including combustion, background/biogenic sources, light and complex alkanes, drilling activities, and ONG acetylene. Factors linked to local ONG activities exhibited clear temporal and spatial correlations with Broomfield well development. Benzene source analysis revealed distinct contribution gradients, with ONG-related sources notably influencing areas near the well pads, particularly in pre-production. ONG-related weekly benzene contributions varied from 9% to 63% at a community background site and 18% to 89% in a neighborhood close to a well pad.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Challenges and Gaps in the Development of Pulsed Power for Fusion Applications: A Preroadmapping Perspective From Industry, Academia, and National Laboratory Experts

Fusion energy meets the twenty-first century World Grand Challenge of sustainable, ubiquitous, and safer energy sources. However, harnessing the promise of fusion energy has proven elusive. The competing approaches to fusion power plant design include inertial confinement fusion, National Ignition Facility (ICF-NIF, Z machine, etc.,) magnetic confinement fusion (MCF-Tokamak, stellarators, etc.), and other approaches that show promise in small- (flow stabilized Z pinches) or large-scale applications. These approaches are being accelerated with private and public funding and seek to demonstrate the feasibility of different approaches to fusion-based power plants. Yet, how can the necessary pulsed power technologies for these disruptive technology bases be accelerated with no clear “Dominant Design?” Roadmapping holds the promise to identify and develop common critical pulsed power components for laboratory, prototype, and commercial fusion, and can accelerate the commercialization of fusion reactor designs. A preroadmapping Workshop on Pulsed Power for Fusion was held at the IEEE International Pulsed Power Conference in San Antonio, TX, USA, in June 2023. The workshop had 177 attendees. Here, the common elements for many of the ICF technologies vying for dominant design were identified. The advancement of these technologies through roadmapping will enhance commercial expectations that require their rapid and innovative development in the next five years, as well as the next five to ten years. The key technologies identified that underpin and limit the advancement of fusion power include pulsed power technologies such as energy storage, high-voltage switching, additive manufacturing, and modular pulsed power circuit topologies. In conclusion, they are the focus of our effort in the following roadmap scenario, which will delineate potential paths to technology development.

Curry, Randy D. [I-Pulse Group, Albuquerque, NM (U↗
DOE OSTI2026

Development of male-sterile lines of Setaria viridis to accelerate C 4 model plant genetics

Setaria viridis is a diploid C 4 grass in the Poaceae family, notable for its rapid life cycle of 6–8 weeks from sowing to seed—much shorter than the 4–5 months required by crops such as Zea mays and Sorghum bicolor . This fast growth makes S. viridis a valuable model for C 4 crop research. Genetic crosses are essential for studying gene function, but manual crossing is labor-intensive and time-consuming. Here, to address this, we developed a male-sterile line by targeting the S. viridis ortholog of Setaria italica NO POLLEN 1 ( SiNP1 ), which encodes a glucose–methanol–choline oxidoreductase required for pollen exine formation. Using Cas9 and TREX2 -mediated genome editing, we generated SiNP1 knockouts in both the S. viridis ME034V and A10.1 backgrounds that were fully male-sterile. Backcrossing T 0 male-sterile plants to ME034V wild-type followed by selfing yielded a stable BC 1 F 2 line homozygous for a 59 bp deletion in the S. viridis NO POLLEN 1 gene, easily genotyped by PCR and maintained by heterozygous siblings. Using this line, we developed a simple and efficient crossing protocol that eliminates the need for emasculation. This method enables a single person to perform up to 100 crosses per day—compared to 15 using traditional methods—and yields 20–32 F 1 hybrid seeds per panicle with 100% genetic purity. We also quantified pollen flow and outcrossing frequencies under greenhouse conditions to develop optimal bagging strategies and prevent unintended pollination. This resource accelerates genetic research in S. viridis , enhancing its utility as a premier C 4 model for mapping and functional genomics.

C4 research↗
DOE OSTI2025

Development and transferability of neural-network models for plasma-surface interactions

Plasma-surface interactions are increasingly critical to modern technologies; yet, accurate molecular dynamics simulations remain limited by the capabilities of interatomic potentials. Deep Potentials (DPs) promise to revolutionize the field by providing a systematic method for producing accurate interatomic potentials. The primary challenge of DP development is selecting a dataset, which efficiently spans the set of atomic environments one expects to encounter in the subsequent molecular dynamics simulations. The computational cost of density functional theory calculations, which are the typical basis for DP development, makes it impossible to directly verify the quality of a given DP. To address this challenge, we explore the development of a deep-learned interatomic potential, “DeepREBO,” trained to reproduce the behavior of the REBO2 empirical potential, enabling direct validation of training methodology and transferability. Using an active learning framework, we begin with a minimal dataset and iteratively expand it to train a Deep Potential-Smooth Edition model that faithfully reproduces REBO2 results for 25 eV hydrogen bombardment of diamond (001), a particularly challenging case. We show that small, carefully curated datasets can outperform large, unguided ones, with effective models requiring fewer than 15 000 snapshots. Subsequent transferability tests demonstrate that while DeepREBO generalizes well to diamond (111) surfaces, performance degrades for amorphous carbon or higher-energy impacts, highlighting the need for use-case-specific training data. We also evaluate methods to improve short-range repulsion. This study outlines best practices for training robust deep potentials and underscores the importance of dataset design for predictive plasma simulations.

Ab-initio molecular dynamics↗
DOE OSTI2026

Development of a deep potential model for F and CF 2 etching of Si and SiO 2

An understanding of plasma-surface interactions at increasingly smaller scales is invaluable for the development of novel technologies and processing techniques. Molecular dynamics (MD) simulations can provide insights into atomic-scale interactions, though they are restricted by the availability of interatomic potentials. Machine learning methods, such as Deep Potential Molecular Dynamics (DeepMD), provide a systematic framework for the development of accurate and flexible ab initio-based models. In this work, we develop DeepMD models for the ion-enhanced etching of Si and SiO 2 by F and CF 2 radicals. We employ an active learning process to expand the data set on which the model is trained and demonstrate its effect on the model accuracy. The DeepMD results are compared to data from classical MD simulations and experiments. Physical sputtering yields of SiO 2 by Ar + ions show good agreement with previous simulation results using conventional interatomic potentials, though the predicted depth profiles are different. Etching yields are calculated as a function of ion energy and neutral to ion flux ratio for the Ar + ion-enhanced etching of SiO 2 and Si by F atoms, as well as for etching of SiO 2 by CF 2 radicals, showing reasonable agreement with experimental data. Finally, an ion-enhanced surface kinetic model is fitted to the DeepMD etch yields, and the fitted parameters are compared to quantities computed directly from DeepMD simulations. This study illustrates how molecular dynamics simulations using machine learning potentials can provide an accurate model of etching processes relevant to device manufacturing.

Kounis-Melas, Andreas [Princeton Univ., NJ (United↗
DOE OSTI2026

TCAD-Machine Learning Enabled TID Compact Model Development for Commercial SiC MOSFET

We propose a TCAD (Technology Computer Aided Design)-machine learning coupled approach that combines a TCAD tool (Charon), optimization/uncertainty quantification tool (Dakota), surrogate models, and Bayesian learning capabilities. The coupling approach is used for accurate modeling and calibration of total ionizing dose (TID) induced threshold voltage (V th ) shifts in Commercial-Off-The-Shelf (COTS) semiconductor devices and to develop physics-informed TID compact models. This versatile approach is applied to model the TID effect in an exemplar COTS 3.3 kV SiC power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). With the Charon-Dakota coupling, we can determine key device geometry and doping values based on device physics, which are difficult to obtain or not available for COTS devices but important for TCAD simulation; additionally, we can efficiently generate thousands of simulation results in a large parameter space, which makes it possible to develop data-driven surrogate models and perform Bayesian calibration. Utilizing the full tool-coupling approach, we achieve calibrated TCAD simulation models that accurately capture the average TID-induced V th shifts behavior with total doses and V th shifts saturation at high doses as observed in experimental data. More importantly, the calibrated TCAD simulations are obtained with determined TID model parameters (e.g., hole trap density and capture cross section) values that contain well quantified uncertainties. Furthermore, we can isolate and quantify the noises that are not captured by the TCAD models but exist in the measured data due to measurements and devices variabilities. Lastly, the calibrated surrogate models are used to develop physics-informed TID compact models. The method is generalizable to other devices and/or radiation conditions with few modifications and can provide well-determined uncertainties.

COTS↗
DOE OSTI2024

Miniaturize the Redox Flow Battery for Accelerated Materials Discovery and Development

Redox flow batteries are a promising technology for grid-scale energy storage. The aqueous organic redox flow battery is of particular interest for its potentially low material cost and sustainability. Developing novel organic active material for flow battery electrolytes typically entails molecular engineering toward desired properties, necessitating organic synthesis. In a research laboratory setting, the synthesis of specifically designed organic molecules featuring targeted functional groups is time and resources intensive. In the past, synthesizing materials required for battery testing has often required gram-scale production, presenting considerable constraints on the pace of novel organic material discovery. In this report, we introduce a miniaturized cell design that mandates only milligram-scale material synthesis while yielding testing outcomes equivalent or superior to those reported with other commercially available or homemade flow cells in the literature. The test results under various pH conditions validate the scale-down strategy to accelerate the flow battery material discovery and development using the newly designed mini cell. This approach offers researchers an efficient means to notably reduce the time and resources required to develop novel materials for flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Development of a two-zone zero-dimensional mixing model for actively fueled prechamber engines

In this numerical work, a zero-dimensional, two-zone mixing model was developed and validated to capture the mixture preparation process of an actively fueled prechamber engine. The model was developed for ethanol-gasoline fuel blends but is applicable to various fuels of interest relevant to prechamber applications. The model was exercised to demonstrate the effects of boundary conditions, fuel composition, and residual content on the mixture stoichiometry predictions. The 0D model showed reasonable agreement in prechamber equivalence ratio predictions with higher fidelity computational fluid dynamics modeling, but the accuracy of model was constrained to the governing assumptions of the injection process. The modeling assumptions surrounding the non-dimensional injection of mass into the prechamber were scrutinized to identify key areas of model improvement. The results indicate heat transfer effects play a crucial role in the evaporation of the fuel within the confined auxiliary chamber, especially when considering fuels with high latent heat of vaporization. Additionally, the presence of fuel films that collect on the prechamber surfaces complicated the modeled evaporative cooling loses as the modeling suggests the films evaporate primarily by means of conduction from the boundary. Furthermore, the developed model serves as a simplified framework to generate calibration maps of prechamber fueling or run real time as an open loop control strategy such that desired prechamber mixture proportions are effectively targeted.

Zero-dimensional↗
DOE OSTI2025

Development of the Contamination Distribution Centered Toxics Mobility Vulnerability Index in the Beaumont–Port Arthur Region of Texas

This study advances the Toxics Mobility Inventory (TMI) and the Toxics Mobility Vulnerability Index (TMVI) to develop a new tool to assess the movement of hazardous substances and their implications for vulnerable communities. It emphasizes the need to include contamination distribution variables in such indices to address disproportionate impacts and more accurately reflect vulnerability. The study uses the TMI framework and TMVI methodology in the Beaumont–Port Arthur region of Texas, also integrating contamination distribution considerations into the analysis to develop a new framework and process. The new Contamination Distribution Centered Toxics Mobility Vulnerability Index (CDC-TMVI) consolidates climate change and topography variables into a broader built environment vulnerability category while introducing a contamination sources category. Using ArcGIS Pro and ToxPi tools, the study evaluates 27 geospatial variables across four categories: built environment vulnerability, social vulnerability, health outcomes, and contamination sources. The results indicate significant contributions from contamination and social vulnerability variables, highlighting areas with higher risks of flooding and air pollution. This article advocates for future research and policy efforts to enhance the integration of contamination sources and their spatial distributions into toxics mobility assessments to better protect vulnerable populations. Furthermore, the unique methodology and findings serve as a basis for developing targeted measures and strategic planning to improve environmental health.

contamination↗
DOE OSTI2025

Dataset for "A Microfluidic Spore Chamber for Long-Term Imaging of Single-Spore Hyphal Development"

Understanding the life cycle of fungal spores is essential for elucidating their roles in pathogenesis, dispersal, and survival. However, studying spore development under controlled, spatially defined conditions remains challenging. Here, we present the Spore Chamber, a custom-built microfluidic platform engineered for parallel trapping and long-term imaging of individual spores under defined media conditions, enabling real-time visualization of hyphal development. Using Aspergillus fumigatus as a model organism, we demonstrate that sparse trapping of individual spores within size-matched trap geometries enables long-term time-lapse imaging of key developmental stages, including germination, polarized hyphal elongation, branching, and conidiophore formation. To assess the device’s capacity to resolve morphogenetic responses to exogenous signals, we introduced lipochitooligosaccharides (LCOs) and short-chain chitooligosaccharides (COs). Rhizobium-derived, non-sulfated LCO (nsLCO) mixtures induced enhanced secondary branching (hyperbranching), a response not previously reported in A. fumigatus under these signal conditions, to our knowledge, whereas sulfated LCOs and CO4 did not significantly alter branching patterns. In addition, long-term confinement and imaging revealed rare developmental morphologies previously described primarily in mutant strains, including split conidiophore formation, elongated phialides, microcyclic conidiation, and chlamydospore development. Together, these results establish the Spore Chamber as a targeted microfluidic platform for single-spore phenotyping and long-term developmental analysis, with applications in fungal biology, chemical signaling studies, and host–microbe interaction research. Videos of the observed phenomena are included in this data set.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Development and test of a large-aperture Nb3Sn cos-theta dipole coil with stress management

The stress-managed cos-theta (SMCT) coil is a new concept which was proposed and is being developed at Fermilab in the framework of US Magnet Development Program (US-MDP) for high-field and/or large-aperture accelerator magnets based on low-temperature and high-temperature superconductors. A 120-mm aperture two-layer Nb3Sn SMCT dipole coil has been developed at Fermilab to demonstrate and test the SMCT concept including coil design, fabrication technology and performance. The first SMCT demo coil was fabricated and assembled with 60-mm aperture Nb3Sn coil inside a dipole mirror configuration and tested separately and in series with the insert coil. This paper summarizes the design, parameters, and quench performance of the 120-mm aperture SMCT coil in a dipole mirror configuration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Inkjet Printing to Scale Perovskite and Silicon Tandem Solar Cell: Cooperative Research and Development Final Report, CRADA Number CRD-17-00690

The proposed project seeks to develop a method for inkjet printing of the active layer in perovskite solar cells for application in stand-alone products or added to conventional silicon solar cells in a mechanically-stacked tandem configuration. This technology presents significant advanced manufacturing challenges and opportunities in getting to scale, including development of novel uses for printing technologies and development of predictive quality control techniques.

14 SOLAR ENERGY↗
DOE OSTI2024

Center for Tokamak Transient Simulations (RPI Unstructured Mesh Developments for FES SciDAC4 Partnerships) (Final Report)

The goal of this project was the development of unstructured mesh technologies for fusion simulation codes” for FES SciDAC partnerships and to integrate those technologies into the simulation workflows of those partnerships. Specific developments were executed in support of the following FES SciDAC4 partnerships: Partnership Center for High‐fidelity Boundary Plasma Simulation (HBPS), Center for Integrated Simulation of Fusion Relevant RF (RF‐SciDAC), Center for Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces (PSI2), and Center for Tokamak Transient Simulations (CTTS). The key unstructured mesh development areas addressed in this project include (i) methods to most effectively perform PIC calculations on unstructured meshes; (ii) creating meshes for fusion systems accounting for any desired level of geometric complexity and providing physics aware mesh configurations, (iii) adapting unstructured meshes to control the discretization errors, (iv) executing unstructured mesh calculations on GPU accelerated systems, (v) supporting physics/application‐specific PIC operations including surface/wall interactions of particles, (vi) providing infrastructure tools to support the interactions of solvers with unstructured meshes, and (vii) providing advanced methods for coupling plasma physics codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

20A44-121: Modeling and characterization of α-U to accelerate metallic fuels development [Slides]

This presentation contains a high-level description of the Idaho National Laboratory Laboratory Directed Research and Development (LDRD) project, 20A44-121: Modeling and characterization of α-U to accelerate metallic fuels development. It frames the problem, describes a motivation, outlines the research plan involving multiscale modeling and experiments, discusses impact and details research developments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Late-Stage Research Development and Demonstration Sub-activities Updates – FY24 Q3

Oak Ridge National Laboratory (ORNL), in collaboration with the Pacific Northwest National Laboratory (PNNL), the National Renewable Energy Laboratory (NREL), the Lawrence Berkeley National Laboratory (LBNL), and the Hummingbird Firm (a specialized consulting firm focused on promoting diversity, equity, and inclusion considerations), has initiated a national initiative known as the Heat Pump (HP) and Heat Pump Water Heater (HPWH) Field Validation Partnership. This effort involves active participation from numerous critical entities involved in research and market transformation within the field. The ORNL team is responsible for leading Late-Stage Research Development and Demonstration (LSRDD) among the four different topics. The overall outcomes of this project will be: (1) A structured Field Validation Partnership between DOE, the national labs, research, implementation, and market transformation organizations. This will result in unique way to coordinate field validation plans and collect relevant data from around the country into the HP and HPWH Field Validation Database. (2) The Field Validation Partnership will result in a continuous stream of information between DOE and the major industry players in the space of HPs and HPWHs. If desired, DOE could use this information to inform roadmaps related to HP and HPWH market adoption and research going forward. (3) The structure of this Partnership provides a mechanism for sharing lessons learned directly between Late-Stage RD&D, Building Integration Barriers, Regional Market and Policy and Workforce Development efforts. The result will be training content that is well-reviewed by the Partnership which will lead to a workforce that meets the industry’s quality and workforce supply demands. (4) The structure of this Partnership also provides an opportunity for regions to share lessons learned on policy and market transformation with each other through the Market and Policy core Committee. This report includes an update in Late-Stage Research Development and Demonstration.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Development of Graphite Thermal and Mechanical Modeling Capabilities in Grizzly

Nuclear-grade graphites are used extensively in the core designs of multiple types of advanced nuclear reactors. In the reactor environment, graphite is exposed over long durations to extreme conditions, including high temperatures, radiation and potentially molten salt and oxygen. Exposure to these conditions can cause several degradation mechanisms in graphite, including nonuniform volumetric strains induced by irradiation and thermal expansion, which lead to stresses that can compromise the performance of graphite components. Evaluating component integrity, predicting component performance over the reactor lifetime, and developing design standards all require robust tools for predicting fracture initiation and propagation in graphite structural components in nuclear reactors. This report documents progress in an ongoing effort to develop modeling and simulation tools in the Grizzly code for predicting the performance of graphite exposed to reactor conditions. Recent developments include a set of thermal and mechanical models that now include the IG-110, NBG-18, and H-451 graphite grades. Improvements have also been made to a nonlinear damaged plasticity model applicable to predicting damage under tension and compression to quasibrittle materials, including graphite. In addition, enhancements have been made to the extended finite element method implementation targeted at simulating graphite fracture. These include new capabilities for crack nucleation in the interior of a solid body, improved treatment of crack nucleation on free surfaces, and more robust modeling approaches for crack growth approaching free surfaces or other cracks.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of Additive Manufacturing for Ceramic Matrix Composite Vanes

This report discusses the development of additive manufacturing for polymer-derived ceramic materials to create novel cooled gas turbine airfoils made from ceramics. Gas turbine engines have extremely high temperatures in the hot section of the engine that exceed the melting point of nickel superalloy materials that the engine is made from. Advanced cooling technologies have been developed over decades for metallic parts. Ceramic materials have higher temperature capabilities than superalloys, but are difficult to shape in the complex designs used in modern turbines. Several thrusts were investigated during the project, including development of higher material strength resins, improvement of ultraviolet (UV) photopolymerization and post-processing techniques to increase survivability of ceramic parts, thermomechanical modeling of novel ceramic airfoil designs for higher cooling effectiveness, and experimental validation of the modeling and manufacturing in a turbine vane test facility at nondimensional conditions that are relevant to modern gas turbines. Some major findings of the work include a significant increase in ceramic survivability during pyrolysis (a high temperature process that converts the organic material to a ceramic) by adjusting the composition ratios of the resins, as well as a tolulene soak after printing to remove unreacted polymer material. Thermomechanical optimization of the internal cooling structure indicated that a high density pin fin array would enable an 80% increase in overall cooling effectiveness relative to a baseline geometry, which was later verified during experimental testing in a high speed linear cascade. Ceramic vanes were tested at Mach numbers of up to 0.9 which is relevant to modern gas turbines. High temperature capability of the ceramic vanes was not tested in this work.

36 MATERIALS SCIENCE↗