Results for “differences atmosphere.” — Page 11

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗

NASA NTRS2025

Describing Seasonal Mixtures of Cloud Regimes Via “Regimes of Regimes”

We propose a new type of cloud classification, relevant to monthly or longer time scales, but which inherently still encompasses cloud subgrid variability information at ~100 km scales. Our proposed classification partitions frequencies of occurrence over these scales of previously defined cloud regimes (CRs). We call the resulting distinct cloud entities regimes of regimes (RORs). While the CRs have been previously shown to successfully classify daily mesoscale subgrid variability via distributions of cloud fraction within distinct combinations of cloud top pressure and cloud optical thickness, the RORs essentially represent the prevalent seasonal mixtures of these CRs. RORs thus embody the seasonal cloudiness of a mesoscale region. We show that each ROR can still be associated with more traditional cloud classifications via composites of coincident active (lidar and cloud radar) cloud views. In a first application that gauges the potential utility of RORs, we pair them with CERES EBAF radiative fluxes to gain insight into recent trends of the cloud radiative effect. The ROR corresponding to an environment of shallow convection stands out in this analysis largely because of its declining population. Our study demonstrates the potential of RORs to categorize globally mesoscale cloudiness at monthly/seasonal scales and to serve as proxies of different atmospheric states at these scales.

Nayeong Cho↗

DOE OSTI2020

Light-Induced Metastabilities in Highly Efficient MZO/CdSeTe/CdTe Thin Film Solar Cells

Metastability effects have been investigated in high efficiency MZO/CdSeTe/CdTe solar cells. Two different preconditioning procedures have been studied to recover the performance of the devices. These preconditioning procedures include light soaking, annealing and cooling down the device under different atmospheric conditions. J-V curves before any preconditioning showed a `S` shaped behavior and disappears after 15 minutes of light soaking under 1000 Wm-2. Both Atmospheric and Vacuum preconditioning showed similar recovery of the device performance. However, this recovery only lasts for 3 days when the devices were kept under vacuum in the dark.

14 SOLAR ENERGY↗

DOE OSTI2023

In Situ Wind and Turbulence Measurements in a Field of Full-Size Parabolic Trough Solar Collectors

Concentrated Solar Power (CSP) is a promising method for using Solar power for electricity generation with thermal energy storage. One of the primary drivers of structural design costs of CSP collector structures is wind loading. To date, the design of these structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) powerplant that uses parabolic troughs as solar collectors. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights on structural dynamic response, and generating a first-of-a-kind, comprehensive, high-resolution wind-loading dataset available for validating simulations of wind loading on collector structures. The measurements at NSO consist of Sonic anemometers on masts at different heights to characterize the incoming flow and conditions within and above the trough field, in combination with a Doppler Lidar scanning the horizontal plane above the troughs. The wind measurements at NSO have been continuously operating since October 2021 and provide a year-long dataset characterizing wind and turbulence conditions. The structural load measurements start in November 2022 and will complement the wind measurements. In this poster, we present first results of the wind measurement campaign by highlighting days with different atmospheric flow conditions. We identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. The highest loads are expected when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest loads and block the subsequent rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales change. These affected conditions produce unique load cases on the structures that will be captured by the load measurements. If the wind blows along the trough rows, wind and turbulence conditions are less influenced by the troughs.

atmospheric turbulence↗

DOE OSTI2023

In Situ Wind and Turbulence Measurements in a Field of Full-Size Parabolic Trough Collectors

Concentrated Solar Power (CSP) is a promising method for using Solar power for electricity generation with thermal energy storage. One of the primary drivers of structural design costs of CSP collector structures is wind loading. To date, the design of these structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) powerplant that uses parabolic troughs as solar collectors. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights on structural dynamic response, and generating a first-of-a-kind, comprehensive, high-resolution wind-loading dataset available for validating simulations of wind loading on collector structures. The measurements at NSO consist of Sonic anemometers on masts at different heights to characterize the incoming flow and conditions within and above the trough field, in combination with a Doppler Lidar scanning the horizontal plane above the troughs. The wind measurements at NSO have been continuously operating since October 2021 and provide a year-long dataset characterizing wind and turbulence conditions. The structural load measurements start in November 2022 and will complement the wind measurements. In this poster, we present first results of the wind measurement campaign by highlighting days with different atmospheric flow conditions. We identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. The highest loads are expected when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest loads and block the subsequent rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales change. These affected conditions produce unique load cases on the structures that will be captured by the load measurements. If the wind blows along the trough rows, wind and turbulence conditions are less influenced by the troughs.

concentrated solar power↗

NASA NTRS1984

The reactions of cobalt, iron and nickel in SO-2 atmospheres: Similarities and differences

The reactions of cobalt, iron and nickel in SO2 atmospheres are reviewed and compared. A mixed oxide-sulfide product layer is observed in all cases. Cobalt and nickel exhibits similar behavior. The observed rates are near the sulfidation rates, and the reaction rate is strongly influenced by the outward diffusion of metal through an interconnected sulfide network. A continuous interconnected sulfide is not observed in the oxide-sulfide scales formed on iron, and the reaction rates are more difficult to summarize. The differences and similarities among the three metals are explained in terms of the absence of scale-gas equilibrium and the ratio of the metal diffusivity in the corresponding oxide and sulfide.

Jacobson, N. S.↗

NASA NTRS1985

The reactions of cobalt, iron and nickel in SO2 atmospheres Similarities and differences

The reactions of cobalt, iron and nickel in SO2 atmospheres are reviewed and compared. A mixed oxide-sulfide product layer is observed in all cases. Cobalt and nickel exhibit similar behavior. The observed rates are near the sulfidation rates, and the reaction rate is strongly influenced by the outward diffusion of metal through an interconnected sulfide network. A continuous interconnected sulfide is not observed in the oxide-sulfide scales formed on iron, and the reaction rates are more difficult to summarize. The differences and similarities among the three metals are explained in terms of the absence of scale-gas equilibrium and the ratio of the metal diffusivity in the corresponding oxide and sulfide.

Jacobson, N. S.↗

NASA NTRS1992

Relating SMMR 37 GHz polarization difference to precipitation and atmospheric carbon dioxide concentration - A reappraisal

The relations of Scanning Multi-channel Microwave Radiometer (SMMR) 37 GHz polarization difference to precipitation and atmospheric carbon dioxide (CO2) concentrations are reviewed. Annual precipitation data, a surrogate for green leaf vegetation density, are compared with the coincident SMMR 37 GHz polarization difference from arid and semi-arid West Africa for 1982-85. The SMMR 37 GHz polarization difference was found to be poorly correlated with precipitation in arid and semi-arid zones, contrary to previous reports. Coincident SMMR 37 GHz polarization difference and atmospheric CO2 concentration data from July 1981 to June 1983 are also reviewed. Previously suggested relations of the SMMR 37 GHz polarization difference to atmospheric CO2 concentrations were found to be heavily biased by winter conditions in the Northern Hemisphere. The use of the SMMR 37 GHz polarization difference for determining green leaf vegetation density, net primary production, atmospheric CO2 draw-down and related processes is questioned.

Tucker, C. J.↗

NASA NTRS2012

Middle Atmosphere Response to Different Descriptions of the 11-Year Solar Cycle in Spectral Irradiance in a Chemistry-Climate Model

The 11-year solar cycle in solar spectral irradiance (SSI) inferred from measurements by the SOlar Radiation & Climate Experiment (SORCE) suggests a much larger variation in the ultraviolet than previously accepted. We present middle atmosphere ozone and temperature responses to the solar cycles in SORCE SSI and the ubiquitous Naval Research Laboratory (NRL) SSI reconstruction using the Goddard Earth Observing System chemistry-climate model (GEOS CCM). The results are largely consistent with other recent modeling studies. The modeled ozone response is positive throughout the stratosphere and lower mesosphere using the NRL SSI, while the SORCE SSI produces a response that is larger in the lower stratosphere but out of phase with respect to total solar irradiance above 45 km. The modeled responses in total ozone are similar to those derived from satellite and ground-based measurements, 3-6 Dobson Units per 100 units of 10.7-cm radio flux (F10.7) in the tropics. The peak zonal mean tropical temperature response 50 using the SORCE SSI is nearly 2 K per 100 units 3 times larger than the simulation using the NRL SSI. The GEOS CCM and the Goddard Space Flight Center (GSFC) 2-D coupled model are used to examine how the SSI solar cycle affects the atmosphere through direct solar heating and photolysis processes individually. Middle atmosphere ozone is affected almost entirely through photolysis, whereas the solar cycle in temperature is caused both through direct heating and photolysis feedbacks, processes that are mostly linearly separable. Further, the net ozone response results from the balance of ozone production at wavelengths less than 242 nm and destruction at longer wavelengths, coincidentally corresponding to the wavelength regimes of the SOLar STellar Irradiance Comparison Experiment (SOLSTICE) and Spectral Irradiance Monitor (SIM) on SORCE, respectively. A higher wavelength-resolution analysis of the spectral response could allow for a better prediction of the atmospheric response to arbitrary SSI variations.

Swartz, W. H.↗

NASA NTRS1971

Standard deviation of vertical two-point longitudinal velocity differences in the atmospheric boundary layer.

Statistical estimates of wind shear in the planetary boundary layer are important in the design of V/STOL aircraft, and for the design of the Space Shuttle. The data analyzed in this study consist of eleven sets of longitudinal turbulent velocity fluctuation time histories digitized at 0.2 sec intervals with approximately 18,000 data points per time history. The longitudinal velocity fluctuations were calculated with horizontal wind and direction data collected at the 18-, 30-, 60-, 90-, 120-, and 150-m levels. The data obtained confirm the result that Eulerian time spectra transformed to wave-number spectra with Taylor's frozen eddy hypothesis possess inertial-like behavior at wave-numbers well out of the inertial subrange.

Fichtl, G. H.↗

NASA NTRS1973

Influence of atmosphere pathlengths for different bands

The author has identified the following significant results. Comparison of ERTS-1 imagery in three bands (MSS-4, 5, and 7) acquired over southwestern Kansas on 1 Dec. 72 reveals that low solar altitude has a pronounced different effect on apparent scene illumination in different bands.

Haralick, R. M.↗

NASA NTRS2017

Investigation of Global Particulate Nitrate from the AeroCom Phase III Experiment

An assessment of global particulate nitrate and ammonium aerosol based on simulations from nine models participating in the Aerosol Comparisons between Observations and Models (AeroCom) phase III study is presented. A budget analysis was conducted to understand the typical magnitude, distribution, and diversity of the aerosols and their precursors among the models. To gain confidence regarding model performance, the model results were evaluated with various observations globally, including ground station measurements over North America, Europe, and east Asia for tracer concentrations and dry and wet depositions, as well as with aircraft measurements in the Northern Hemisphere mid-to-high latitudes for tracer vertical distributions. Given the unique chemical and physical features of the nitrate occurrence, we further investigated the similarity and differentiation among the models by examining (1) the pH-dependent NH3 wet deposition; (2) the nitrate formation via heterogeneous chemistry on the surface of dust and sea salt particles or thermodynamic equilibrium calculation including dust and sea salt ions; and (3) the nitrate coarse-mode fraction (i.e., coarse/total). It is found that HNO3, which is simulated explicitly based on full O3-HOx-NOx-aerosol chemistry by all models, differs by up to a factor of 9 among the models in its global tropospheric burden. This partially contributes to a large difference in NO3(-), whose atmospheric burden differs by up to a factor of 13. The atmospheric burdens of NH3 and NHC 4 differ by 17 and 4, respectively. Analyses at the process level show that the large diversity in atmospheric burdens of NO3(-), NH3, and NHC4(+) is also related to deposition processes. Wet deposition seems to be the dominant process in determining the diversity in NH3 and NHC 4 lifetimes. It is critical to correctly account for contributions of heterogeneous chemical production of nitrate on dust and sea salt, because this process overwhelmingly controls atmospheric nitrate production (typically greater than 80 %) and determines the coarse- and fine-mode distribution of nitrate aerosol.

Ammonium aerosol based on simulations↗

NASA NTRS1964

Calculation of the integral multiplicity of mu-meson production in the earth's atmosphere for observation under different thicknesses of absorber

Calculation of integral multiplicity of mu-meson production in atmosphere for observation under different thicknesses of absorber

PARTICLE PRODUCTION↗

NASA NTRS2013

Multi-wavelength Radio Continuum Emission Studies of Dust-free Red Giants

Multi-wavelength centimeter continuum observations of non-dusty, non-pulsating K spectral-type red giants directly sample their chromospheres and wind acceleration zones. Such stars are feeble emitters at these wavelengths, however, and previous observations have provided only a small number of modest signal-to-noise measurements slowly accumulated over three decades. We present multi-wavelength Karl G. Jansky Very Large Array thermal continuum observations of the wind acceleration zones of two dust-free red giants, Arcturus (alpha Boo: K2 III) and Aldebaran (alpha Tau: K5 III). Importantly, most of our observations of each star were carried out over just a few days, so that we obtained a snapshot of the different stellar atmospheric layers sampled at different wavelengths, independent of any long-term variability. We report the first detections at several wavelengths for each star including a detection at 10 cm (3.0 GHz: S band) for both stars and a 20 cm (1.5 GHz: L band) detection for alpha Boo. This is the first time single (non-binary) luminosity class III red giants have been detected at these continuum wavelengths. Our long-wavelength data sample the outer layers of alpha Boo's atmosphere where its wind velocity is approaching (or possibly has reached) its terminal value and the ionization balance is becoming frozen-in. For alpha Tau, however, our long-wavelength data are still sampling its inner atmosphere, where the wind is still accelerating probably due to its lower mass-loss rate. We compare our data with published semi-empirical models based on ultraviolet data, and the marked deviations highlight the need for new atmospheric models to be developed. Spectral indices are used to discuss the possible properties of the stellar atmospheres, and we find evidence for a rapidly cooling wind in the case of alpha Boo. Finally, we develop a simple analytical wind model for alpha Boo based on our new long-wavelength flux measurements.

chromospheres↗

NASA NTRS2014

Temporal Evolution of Solar Wind Ion Composition and Their Source Coronal Holes During the Declining Phase of Cycle 23. I. Low-Latitude Extension of Polar Coronal Holes

We analyzed 27 solar wind (SW) intervals during the declining phase of cycle 23, whose source coronal holes (CHs) can be unambiguously identified and are associated with one of the polar CHs. We found that the SW ions have a temporal trend of decreasing ionization state, and such a trend is different between the slow and fast SW. The photospheric magnetic field, both inside and at the outside boundary of the CH, also exhibits a trend of decrease with time. However, EUV line emissions from different layers of the atmosphere exhibit different temporal trends. The coronal emission inside the CH generally increases toward the CH boundary as the underlying field increases in strength and becomes less unipolar. In contrast, this relationship is not seen in the coronal emission averaged over the entire CH. For C and O SW ions that freeze-in at lower altitude, stronger correlation between their ionization states and field strength (both signed and unsigned) appears in the slow SW, while for Fe ions that freeze-in at higher altitude, stronger correlation appears in the fast SW. Such correlations are seen both inside the CH and at its boundary region. On the other hand, the coronal electron temperature correlates well with the SW ion composition only in the boundary region. Our analyses, although not able to determine the likely footpoint locations of the SW of different speeds, raise many outstanding questions for how the SW is heated and accelerated in response to the long-term evolution of the solar magnetic field.

MAGNETIC FIELDS↗

NASA NTRS1978

The origin of planetary atmospheres

Reasons for the difference in planetary atmospheres are reviewed. Atmospheric formation by outgassing from terrestrial planets is contrasted with the retention of the primary material by the outer planets. The differences in Venusian, earth, and Martian atmospheres are explained in terms of planet distance from the sun. Data on terrestrial planet pressures, temperatures, and gas compositions, as well as on rates and gas composition of outgassing material are presented. The significance of planet mass is considered.

Bauer, S. J.↗

DOE OSTI2026

Evaluating Atmospheric River Impacts on Energy and Moisture Transport in the Arctic Using Different Detection Algorithms

Atmospheric rivers (ARs) significantly impact the Arctic climate system by enhancing atmospheric heat and moisture transport and altering the local energy budget. Developing AR detection tools (ARDTs) is critical yet challenging. This study evaluates 12 ARDTs in the Arctic to assess their performance in representing atmospheric heat (represented by moist static energy) and moisture transport, as well as surface downward longwave radiation (LWD) and precipitation impacts, spanning 2000 to 2019 using ERA5 reanalysis. We find that AR occurrence frequency in the Arctic varies widely, from less than 1% to over 13%, depending on the ARDT. This variability leads to differences in contributions to poleward atmospheric heat (<1%–33%) and moisture (<1%–49%) transport. The highest AR frequency, and corresponding contributions to atmospheric heat and moisture transport, occurs over the Atlantic sector during non-summer seasons for most ARDTs. This region aligns with the primary poleward moisture pathway and the end of climatological mid-latitude storm tracks, highlighting strong connections between Arctic ARs and mid-latitude cyclones. ARs induce significant LWD anomalies, largest in winter, smallest in summer, and also substantially contribute to the seasonal precipitation. Global ARDTs detect fewer ARs with larger anomalies (>100 W m−2 in higher Arctic), but contribute <1% to seasonal climatological LWD and precipitation. In contrast, polar-specific ARDTs detect higher AR occurrences and account for up to 16% of seasonal LWD and 41% precipitation. This suggests that algorithms emphasizing extreme events with large anomalies do not necessarily indicate a large climate radiative and precipitation impact.

Zhang, Chen [University of Colorado, Boulder, CO (↗