Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Modeling the Diffuse Cloud-Top Optical Emissions from Ground and Cloud Flashes

A number of studies have indicated that the diffuse cloud-top optical emissions from intra-cloud (IC) lightning are brighter than that from normal negative cloud-to-ground (CG) lightning, and hence would be easier to detect from a space-based sensor. The primary reason provided to substantiate this claim has been that the IC is at a higher altitude within the cloud and therefore is less obscured by the cloud multiple scattering medium. CGs at lower altitudes embedded deep within the cloud are more obscured, so CG detection is thought to be more difficult. However, other authors claim that because the CG source current (and hence luminosity) is typically substantially larger than IC currents, the greater CG source luminosity is large enough to overcome the effects of multiple scattering. These investigators suggest that the diffuse cloud top emissions from CGs are brighter than from ICs, and hence are easier to detect from space. Still other investigators claim that the detection efficiency of CGs and ICs is about the same because modern detector sensitivity is good enough to "see" either flash type no matter which produces a brighter cloud top emission. To better assess which of these opinions should be accepted, we introduce an extension of a Boltzmann lightning radiative transfer model previously developed. It considers characteristics of the cloud (geometry, dimensions, scattering properties) and specific lightning channel properties (length, geometry, location, current, optical wave front propagation speed/direction). As such, it represents the most detailed modeling effort to date. At least in the few cases studied thus far, it was found that IC flashes appear brighter at cloud top than the lower altitude negative ground flashes, but additional model runs are to be examined before finalizing our general conclusions.

Solakiewicz, Richard↗
NASA NTRS1974

Mariner 6, 7, and 9 ultraviolet spectrometer experiment - Analysis of hydrogen Lyman alpha data

Four Lyman alpha airglow measurements of the limb and disk of Mars, made by ultraviolet spectrometers on Mariner 6 and 7 in 1969 and Mariner 9 in 1971, are analyzed to determine the amount and distribution of atomic hydrogen above 80 km. The variation of atomic hydrogen with altitude is calculated by using time-independent chemical diffusion models from 80 to 250 km, and an exospheric model is used above 250 km. By employing radiative transfer theory that includes effects of pure absorption and accounts for temperature variations in the atmosphere, a spherical model of the airglow Lyman alpha emission is used to produce theoretical intensities for comparison with the data. It is found that (1) the exospheric temperature and distribution in 1971 are consistent with those determined in 1969, (2) the vertical optical depth above 80 km was 2.2 in 1969 and 5 in 1971, and (3) the derived atomic hydrogen distribution from 80 to 250 km requires a source of atomic hydrogen above 80 km. Comparison of observed profiles with chemical diffusion models implies a large downward flow of atomic hydrogen at 80 km coupled with a large upward flow of molecular hydrogen.-

Anderson, D. E., Jr.↗
NASA NTRS1977

Radio-emitting electrons and cosmic ray confinement

Evidence from radio data obtained at frequencies of 10 to 8000 MHz for steepening of the observed background-radio-continuum spectra in the directions of the galactic Anticenter (A) and Halo Minimum (H) is used to deduce quantitative information on the variation of the magnetic field with distance from the galactic plane. The radio data are analyzed in the framework of the cosmic-ray diffusion model developed by Bulanov and Dogel (1975), and some inferences are drawn regarding the injection spectrum of cosmic-ray electrons as well as their propagation in the Galaxy. The results indicate that: (1) radio-spectrum steepening is centered around 200 MHz in the direction of H and around 330 MHz in the direction of A, implying a lower mean magnetic field toward H and supporting the existence of a radio halo; (2) an injection electron spectrum with a single power law up to the lowest energies cannot explain the radio observations satisfactorily in terms of the diffusion model; and (3) the observed spectral steepening can be satisfactorily understood as being due partly to the deviation from a power-law injection spectrum below a few GeV and partly to the first break arising from electron energy losses in approximately the same energy region.

Badhwar, G. D.↗
DOE OSTI2025

LANL Meteorology Program Self-Assessment 2025 Update

The LANL Meteorological (Met) Program has been subject to several external reviews over the past 19 years. The DOE Meteorological Coordinating Council (DMCC) conducted an initial Met Program Site Assist Visit (SAV) in August 2006 (DMCC 2006). A follow-up SAV in August 2015 assessed progress (DMCC 2015), and in June 2023, the DOE Meteorological Subcommittee (DMSC), successor to the DMCC, conducted a second follow-up SAV (DMSC 2023), in which the Met Program was evaluated relative to the following 8 high-level questions: • What is the state of the meteorological services provided to its customers? • What is the quality of meteorological data provided to its customers and is it adequate and available to meet all customer needs? • What is the quality of atmospheric transport and diffusion modeling provided to its customers and is it applicable to complex wind flow patterns at LANL? • Are the current and future meteorological service customers being serviced appropriately? • Are there adequate human resources to meet present and future program customer needs and are they being appropriately leveraged? • Are existing instrumentation, facilities, and systems adequate to meet present and future customer needs? • Are LANL meteorological services conducted in an efficient, cost-effective manner? • Is meteorological data used to ensure safety & health of LANL personnel? More specific evaluations were performed relative to 23 performance objectives extracted from the ANSI/ANS-3.11- 2024 national standard and 14 separate performance objectives associated with consequence assessment and atmospheric transport and diffusion modeling in the consequence assessment element of DOE G 151.1-1B. In 2023, the DMSC SAV Team also reviewed the status of each of the 18 remaining recommendations from its 2015 SAV. Based on this review, DMSC stated in its Exit Briefing that the LANL meteorological program has gotten much stronger and more robust since 2015 and now represents one of the better managed programs within the DOE complex.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Ensemble‐Based, Large‐Eddy Reconstruction of Wind Turbine Inflow in a Near‐Stationary Atmospheric Boundary Layer Through Generative Artificial Intelligence

ABSTRACT To validate the second‐by‐second dynamics of turbines in field experiments, it is necessary to accurately reconstruct the winds going into the turbine. Current time‐resolved inflow reconstruction techniques estimate wind behavior in unobserved regions using relatively simple spectral‐based models of the atmosphere. Here, we develop a technique for time‐resolved inflow reconstruction that is rooted in a large‐eddy simulation model of the atmosphere. Our “large‐eddy reconstruction” technique blends observations and atmospheric model information through a diffusion model machine learning algorithm, allowing us to generate probabilistic ensembles of reconstructions for a single 10‐min observational period. Our generated inflows can be used directly by aeroelastic codes or as inflow boundary conditions in a large‐eddy simulation. We verify the second‐by‐second reconstruction capability of our technique in three synthetic field campaigns, finding positive Pearson correlation coefficient values () between ground‐truth and reconstructed streamwise velocity, as well as smaller positive correlation coefficient values for unobserved fields (spanwise velocity, vertical velocity, and temperature). We validate our technique in three real‐world case studies by driving large‐eddy simulations with reconstructed inflows and comparing to independent inflow measurements. The reconstructions are visually similar to measurements, follow desired power spectra properties, and track second‐by‐second behavior ().

17 WIND ENERGY↗
NASA NTRS1981

Numerical modeling of diffusive physical vapor transport in cylindrical ampoules

Diffusion limited physical vapor transport in closed cylindrical ampoules of aspect ratio (length/radius) between 0.5 and 10 was studied numerically. The transport of a crystal forming component A through an inert component B, which undergoes zero net transport, was considered. A case in which the partial pressure of B is comparable to that of A, as well as systems with very low partial pressures of B (impurity cases) were treated. Concentrations and velocity distributions were obtained from the coupled transport equations for momentum, mass and components. It was found that the interdiffusion of components in viscous interaction with the container walls leads to (1) recirculation of component B, even in the absence of gravity; (2) concentration gradients normal to the main transport direction in the vapor space; and (3) non-uniform interfacial concentration gradients and, hence, non-uniform crystal growth rates.

Greenwell, D. W.↗
NASA NTRS1981

On the nature of the cosmic ray positron spectrum

A calculation was made of the flux of secondary positrons above 100 MeV expected for various propagation models. The models investigated were the leaky box or homogeneous model, a disk halo diffusion model, a dynamical halo model, and the closed galaxy model. In each case the parameters of these models were adjusted for agreement with the observed secondary or primary ratios and Be 10 abundance. The positron flux predicted for these models was compared with the available data. The possibility of a primary positron component was considered.

Protheroe, R. J.↗
NASA NTRS1991

Diffusion mechanisms in Ir-coated Re for high-temperature, radiation-cooled rocket thrusters

Materials used for radiation-cooled rocket thrusters must be capable of surviving under extreme conditions of high temperatures and oxidizing environments. Thruster chambers were developed using chemical-vapor-deposited (CVD) Re coated with CVD Ir on the inside surface which is exposed to hot combustion gases. Ir serves as an oxidation barrier protecting the Re which maintains structural integrity at high temperatures. In order to predict and extend the performance limits of these Ir-coated Re thrusters, the diffusion kinetics of CVD materials at temperature are studied. Thruster end ring sections were examined using electron microprobe analysis both before and after exposure to high temperature vacuum environments. The resulting elemental maps for Re, Ir, and Mo in the near-surface region allow identification of diffusion mechanisms operating at these temperatures. Line scans for Ir and Re were fit using a diffusion model to extract relevant diffusion constants. The fastest diffusion process is seen to be grain boundary diffusion with Re diffusing down grain boundaries in the Ir overlayer. The measured dependence of the diffusion rate on temperature will allow prediction of operating lifetimes for these thrusters.

Hamilton, J. C.↗
NASA NTRS1993

Supersonic flow calculation using a Reynolds-stress and an eddy thermal diffusivity turbulence model

A second-order model for the velocity field and a two-equation model for the temperature field are used to calculate supersonic boundary layers assuming negligible real gas effects. The modeled equations are formulated on the basis of an incompressible assumption and then extended to supersonic flows by invoking Morkovin's hypothesis, which proposes that compressibility effects are completely accounted for by mean density variations alone. In order to calculate the near-wall flow accurately, correction functions are proposed to render the modeled equations asymptotically consistent with the behavior of the exact equations near a wall and, at the same time, display the proper dependence on the molecular Prandtl number. Thus formulated, the near-wall second order turbulence model for heat transfer is applicable to supersonic flows with different Prandtl numbers. The model is validated against flows with different Prandtl numbers and supersonic flows with free-stream Mach numbers as high as 10 and wall temperature ratios as low as 0.3. Among the flow cases considered, the momentum thickness Reynolds number varies from approximately 4,000 to approximately 21,000. Good correlation with measurements of mean velocity, temperature, and its variance is obtained. Discernible improvements in the law-of-the-wall are observed, especially in the range where the big-law applies.

Sommer, T. P.↗
NASA NTRS1993

Equatorial ground ice on Mars: Steady-state stability

Current Martian equatorial surface temperatures are too warm for water ice to exist at the surface for any appreciable length of time before subliming into the atmosphere. Subsurface temperatures are generally warmer still and, despite the presence of a diffusive barrier of porous regolith material, it has been shown by Smoluchowski, Clifford and Hillel, and Fanale et al. that buried ground ice will also sublime and be lost to the atmosphere in a relatively short time. We investigate the behavior of this subliming subsurface ice and show that it is possible for ice to maintain at a steady-state depth, where sublimation and diffusive loss to the atmosphere is balanced by resupply from beneath by diffusion and recondensation of either a deeper buried ice deposits or ground water. We examine the behavior of equatorial ground ice with a numercial time-marching molecular diffusion model. In our model we allow for diffusion of water vapor through a porous regolith, variations in diffusivity and porosity with ice content, and recondensation of sublimed water vapor. A regolith containing considerable amounts of ice can still be very porous, allowing water vapor to diffuse up from deeper within the ice layer where temperatures are warmer due to the geothermal gradient. This vapor can then recondense nearer to the surface where ice had previously sublimed and been lost to the atmosphere. As a result we find that ice deposits migrate to find a steady-state depth, which represents a balance between diffusive loss to the atmosphere through the overlying porous regolith and diffusive resupply through a porous icy regolith below. This depth depends primarily on the long-term mean surface temperature and the nature of the geothermal gradient, and is independent of the ice-free porosity and the regolith diffusivity. Only the rate of loss of ground ice depends on diffusive properties.

Mellon, Michael T.↗
NASA NTRS2000

Cyclic Oxidation Testing and Modelling: A NASA Lewis Perspective

The Materials Division of the NASA Lewis Research Center has been heavily involved in the cyclic oxidation of high temperature materials for 30 years. Cyclic furnace and burner rig apparati have been developed, refined, and replicated to provide a large scale facility capable of evaluating many materials by a standard technique. Material behavior is characterized by weight change data obtained throughout the test, which has been modelled in a step-wise process of scale growth and spallation. This model and a coupled diffusion model have successfully described cyclic behavior for a number of systems and have provided insights regarding life prediction and variations in the spalling process. Performance ranking and mechanistic studies are discussed primarily for superalloys and coating alloys. Similar cyclic oxidation studies have been performed on steels, intermetallic compounds, thermal barrier coatings, ceramics, and ceramic composites. The most common oxidation test was performed in air at temperatures ranging from 800 deg. to 1600 C, for times up to 10000 h, and for cycle durations of 0.1 to 1000 h. Less controlled, but important, test parameters are the cooling temperature and humidity level. Heating and cooling rates are not likely to affect scale spallation. Broad experience has usually allowed for considerable focus and simplification of these test parameters, while still revealing the principal aspects of material behavior and performance. Extensive testing has been performed to statistically model the compositional effects of experimental alloys and to construct a comprehensive database of complex commercial alloys.

Smialek, J. L.↗
NASA NTRS2011

Employing a Modified Diffuser Momentum Model to Simulate Ventilation of the Orion CEV (DRAFT)

Computational Fluid Dynamics (CFD) is used to model the flow field in the Orion CEV cabin. The CFD model employs a momentum model used to account for the effect of supply grilles on the supply flow. The momentum model is modified to account for non-uniform velocity profiles at the approach of the supply grille. The modified momentum model is validated against a detailed vane-resolved model before inclusion into the Orion CEV cabin model. Results for this comparison, as well as that of a single ventilation configuration are presented.

Straus, John↗
DOE OSTI2025

Sequential Infiltration Synthesis of Multinary Metal Oxides: The Role of Precursor Diffusion and Reactivity

Understanding volatile metal–organic precursor transport in polymer matrices during sequential infiltration synthesis (SIS) is critical to the design of hybrid materials of tailored composition and uniform structure. Here, we investigate the diffusion and reaction behavior of diethylzinc (DEZ) in poly(methyl methacrylate) (PMMA) matrices with variable indium and zinc incorporation. Unlike conventional SIS where precursors adduct or react directly with the polymer backbone, DEZ shows minimal interaction with PMMA. However, DEZ may interact strongly with In–OH or Zn–OH moieties that are previously incorporated into a PMMA thick film. Using spectroscopic ellipsometry, X-ray photoelectron spectroscopy depth profiling, and EDX line scans, we quantify Zn incorporation as a function of exposure time, polymer thickness, and previous infiltration steps. The Zn distribution evolves from surface-localized to deep within the ∼1 μm thick film with increasing DEZ exposures up to 30 min. A reaction-diffusion model incorporating a hindering factor to capture diffusivity decay due to product accumulation reproduces the Zn depth profile and yields physically meaningful parameters to guide future growth. Furthermore, this study provides a framework for interpreting metal–organic precursor infiltration behavior and highlights the utility of model-guided SIS process design.

diethylzinc↗
NASA NTRS2002

Deep Throttle Turbopump Technology Design Concepts

The objective of this project is to increase the throttling range of turbopumps from 30 to 120% of the design value, while maintaining high performance levels. Details are given on wide flow range issues, H-Q characteristics, stall characteristics, energy levels, pressure fluctuations at impeller exit, WFR impeller characteristics, commercial diffuser pumps, slotted or tandem vanes, leading edge characteristics, leading edge models, throat models, diffusion passage models, computational fluid dynamics (CFD) methodologies, and CFD flow cases.

Guinzburg, Adiel↗
DOE OSTI2026

Flow matching meets biology and life science: a survey

Over the past decade, advances in generative modeling, such as generative adversarial networks, masked autoencoders, and diffusion models, have significantly transformed biological research and discovery, enabling breakthroughs in molecule design, protein generation, catalysis discovery, drug discovery, and beyond. At the same time, biological applications have served as valuable testbeds for evaluating the capabilities of generative models. Recently, flow matching has emerged as a powerful and efficient alternative to diffusion-based generative modeling, with growing interest in its application to problems in biology and life sciences. This paper presents the first comprehensive survey of recent developments in flow matching and its applications in biological domains. We begin by systematically reviewing the foundations and variants of flow matching, and then categorize its applications into three major areas: biological sequence modeling, molecule generation and design, and peptide and protein generation. For each, we provide an in-depth review of recent progress. We also summarize commonly used datasets and software tools, and conclude with a discussion of potential future directions.

59 BASIC BIOLOGICAL SCIENCES↗