Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The Aqua-planet Experiment (APE): Response to Changed Meridional SST Profile

This paper explores the sensitivity of Atmospheric General Circulation Model (AGCM) simulations to changes in the meridional distribution of sea surface temperature (SST). The simulations are for an aqua-planet, a water covered Earth with no land, orography or sea- ice and with specified zonally symmetric SST. Simulations from 14 AGCMs developed for Numerical Weather Prediction and climate applications are compared. Four experiments are performed to study the sensitivity to the meridional SST profile. These profiles range from one in which the SST gradient continues to the equator to one which is flat approaching the equator, all with the same maximum SST at the equator. The zonal mean circulation of all models shows strong sensitivity to latitudinal distribution of SST. The Hadley circulation weakens and shifts poleward as the SST profile flattens in the tropics. One question of interest is the formation of a double versus a single ITCZ. There is a large variation between models of the strength of the ITCZ and where in the SST experiment sequence they transition from a single to double ITCZ. The SST profiles are defined such that as the equatorial SST gradient flattens, the maximum gradient increases and moves poleward. This leads to a weakening of the mid-latitude jet accompanied by a poleward shift of the jet core. Also considered are tropical wave activity and tropical precipitation frequency distributions. The details of each vary greatly between models, both with a given SST and in the response to the change in SST. One additional experiment is included to examine the sensitivity to an off-equatorial SST maximum. The upward branch of the Hadley circulation follows the SST maximum off the equator. The models that form a single precipitation maximum when the maximum SST is on the equator shift the precipitation maximum off equator and keep it centered over the SST maximum. Those that form a double with minimum on the equatorial maximum SST shift the double structure off the equator, keeping the minimum over the maximum SST. In both situations only modest changes appear in the shifted profile of zonal average precipitation. When the upward branch of the Hadley circulation moves into the hemisphere with SST maximum, the zonal average zonal, meridional and vertical winds all indicate that the Hadley cell in the other hemisphere dominates.

AGCM↗

Towards a Marine Stratus Climatology on Drizzle Occurrence from CALIPSO

Marine stratus are a predominant feature of our planet with the annual mean coverage exceeding 20%. They strongly reflect sunlight, yet exert only a modest effect on outgoing infrared radiation, providing a significant net cooling to the Earth’s radiative balance. Their formation is coupled to boundary layer circulations that are driven, in part, by cloud top radiative cooling and evaporative cooling from precipitation in downdrafts. Understanding how these cloud systems evolve as the climate changes is a key question that requires additional information on their lifecycle and microphysical properties to accurately represent their behavior in global circulation models. From a large-scale perspective, insight into the microphysical properties of marine stratus at cloud top can be realized through estimates of the effective radius (Re) of the droplet size distributions derived from MODIS observations. Estimates on the occurrence of rain/drizzle are available from CloudSat. Together these observations indicate that precipitation frequently occurs in clouds with higher cloud top Re. This relationship is consistent with the well documented shift in cloud top droplet size distributions towards fewer, yet larger droplets prior the onset of precipitation. Here we report on a new and complementary set observations from the CALIPSO mission. The approach derives an extinction-to-backscatter ratio (Sc, also known as the cloud lidar ratio) using an established relationship that depends on observations of the lidar attenuated backscatter and volume depolarization ratio within the cloud. Because Sc is strongly and inversely related to Re, a change in the derived Sc from higher to lower values corresponds to a change in the droplet size distribution as seen by MODIS. This change in the lidar signals at cloud top clearly identifies clouds that are capable of precipitation. The presentation provides a brief overview of the approach for deriving Sc and compares CALIOP-derived Sc with observations from other techniques. CALIOP classifications of drizzling clouds, based on the retrieved values Sc, are compared to independent, collocated assessments of drizzle occurrence reported in the standard CloudSat data products. Regional and seasonal comparisons highlight the strengths and weaknesses of the two sensors. A machine learning approach that combines information from both CALIOP and CloudSat showcases possible improvements in the global identification of scenes likely to contain rain-bearing clouds.

CALIPSO↗

Fundamental Study of a Single Point Lean Direct Injector. Part I: Effect of Air Swirler Angle and Injector Tip Location on Spray Characteristics

Lean direct injection (LDI) is a combustion concept to reduce oxides of nitrogen (NOx) for next generation aircraft gas turbine engines. These newer engines have cycles that increase fuel efficiency through increased operating pressures, which increase combustor inlet temperatures. NOx formation rates increase with higher temperatures; the LDI strategy avoids high temperature by staying fuel lean and away from stoichiometric burning. Thus, LDI relies on rapid and uniform fuel/air mixing. To understand this mixing process, a series of fundamental experiments are underway in the Combustion and Dynamics Facility at NASA Glenn Research Center. This first set of experiments examines cold flow (non-combusting) mixing using air and water. Using laser diagnostics, the effects of air swirler angle and injector tip location on the spray distribution, recirculation zone, and droplet size distribution are examined. Of the three swirler angles examined, 60 degrees is determined to have the most even spray distribution. The injector tip location primarily shifts the flow without changing the structure, unless the flow includes a recirculation zone. When a recirculation zone is present, minimum axial velocity decreases as the injector tip moves downstream towards the venturi exit; also the droplets become more uniform in size and angular distribution.

vortex↗

Fundamental Study of a Single Point Lean Direct Injector. Part I: Effect of Air Swirler Angle and Injector Tip Location on Spray Characteristics

Lean direct injection (LDI) is a combustion concept to reduce oxides of nitrogen (NOx) for next generation aircraft gas turbine engines. These newer engines have cycles that increase fuel efficiency through increased operating pressures, which increase combustor inlet temperatures. NOx formation rates increase with higher temperatures; the LDI strategy avoids high temperature by staying fuel lean and away from stoichiometric burning. Thus, LDI relies on rapid and uniform fuel/air mixing. To understand this mixing process, a series of fundamental experiments are underway in the Combustion and Dynamics Facility at NASA Glenn Research Center. This first set of experiments examines cold flow (non-combusting) mixing using air and water. Using laser diagnostics, the effects of air swirler angle and injector tip location on the spray distribution, recirculation zone, and droplet size distribution are examined. Of the three swirler angles examined, 60 deg is determined to have the most even spray distribution. The injector tip location primarily shifts the flow without changing the structure, unless the flow includes a recirculation zone. When a recirculation zone is present, minimum axial velocity decreases as the injector tip moves downstream towards the venturi exit; also the droplets become more uniform in size and angular distribution.

Tedder, Sarah A.↗

Distribution of cultivated and uncultivated cyanobacteria and Chloroflexus-like bacteria in hot spring microbial mats

Oligodeoxynucleotide hybridization probes were developed to complement specific regions of the small subunit (SSU) rRNA sequences of cultivated and uncultivated cyanobacteria and Chloroflexus-like bacteria, which inhabit hot spring microbial mats. The probes were used to investigate the natural distribution of SSU rRNAs from these species in mats of Yellowstone hot springs of different temperatures and pHs as well as changes in SSU rRNA distribution resulting from 1-week in situ shifts in temperature, pH, and light intensity. Synechococcus lividus Y-7c-s SSU rRNA was detected only in the mat of a slightly acid spring, from which it may have been initially isolated, or when samples from a more alkaline spring were incubated in the more acid spring. Chloroflexus aurantiacus Y-400-fl SSU rRNA was detected only in a high-temperature mat sample from the alkaline Octopus Spring or when lower-temperature samples from this mat were incubated at the high-temperature site. SSU rRNAs of uncultivated species were more widely distributed. Temperature distributions and responses to in situ temperature shifts suggested that some of the uncultivated cyanobacteria might be adapted to high-, moderate-, and low-temperature ranges whereas an uncultivated Chloroflexus-like bacterium appears to have broad temperature tolerance. SSU rRNAs of all uncultivated species inhabiting a 48 to 51 degrees C Octopus Spring mat site were most abundant in the upper 1 mm and were not detected below a 2.5-to 3.5-mm depth, a finding consistent with their possible phototrophic nature. However, the effects of light intensity reduction on these SSU rRNAs were variable, indicating the difficulty of demonstrating a phototrophic phenotype in light reduction experiments.

Non-NASA Center↗

Drop Axis Ratio Distributions in Stratiform and Convective Rain

A fully calibrated low profile 2D video disdrometer (2DVD) has been recording many different rainfall events in Northern Alabama (USA) since June 2007. An earlier publication reported drop shapes and axis ratio distributions determined for some of the events. For one of the cases examined, a noticeable shift in the 3.5 - 3.75 mm drop axis ratio distribution was noted. In this paper, we extend the earlier work by separating the 2DVD measurements into stratiform and convective rain. The separation is made possible by using the minute-by-minute drop size distribution (DSD) measured by the 2DVD. The 1-minute DSDs are fitted to a gamma distribution, and using a simple indexing technique which involves two of the fitted parameters, periods of convective and stratiform rain are separated for a given event. The output of the DSD indexing technique is qualitatively confirmed by comparing with simultaneous time series observations from a co-located UHF profiler which continuously records height profiles of reflectivity, Doppler mean and spectral width, all of which enable the identification of bright-band periods and, furthermore, periods of moderate and deep convection. Excellent consistency is found between the output of the DSD-based separation method and the profiler observations. Next, we utilize the output of DSD index-based separation method to flag the periods of severe convection for a given event. Drop axis ratios during the flagged periods are derived and compared with those during stratiform rain periods. Five cases have been considered. Axis ratio distributions do not show appreciable differences between stratiform and convective periods for four of the cases. The fifth case (the same case as reported earlier) shows a shift in the 3.5 - 3.75 mm drop axis ratios during a prolonged period of convection. The contoured shapes for these drops determined from the 2DVD camera data indicate the possibility of non-axisymmetric oscillations, compared with the contoured images for other events which fit well to our reference drop shapes. For all of above cases, observations from a C-band polarimetric radar - situated 15 km away are examined. The variations between the co-polar radar reflectivity and the differential reflectivity as well as the specific differential phase are compared with the 2DVD data based scattering calculations for the 5 events. The implications will be discussed.

Thurai, M.↗

Fluid Shifts: Otoacoustical Emission Changes in Response to Posture and Lower Body Negative Pressure

INTRODUCTION: The purpose of the NASA Fluid Shifts Study is to characterize fluid distribution and compartmentalization associated with long-duration spaceflight and to correlate these findings with vision changes and other elements of the visual impairment and intracranial pressure (VIIP) syndrome. VIIP signs and symptoms, as well as postflight lumbar puncture data, suggest that elevated intracranial pressure (ICP) may be associated with spaceflight-induced cephalad fluid shifts, but this hypothesis has not been tested. Due to the invasive nature of direct measures of ICP, a noninvasive technique of monitoring ICP is desired for use during spaceflight. The phase angle and amplitude of otoacoustic emissions (OAEs) have been shown to be sensitive to posture change and ICP (1, 2), therefore use of OAEs is an attractive option. OAEs are low-level sounds produced by the sensory cells of the cochlea in response to auditory stimulation. These sounds travel peripherally from the cochlea, through the oval window, to the ear canal where they can be recorded. OAE transmission is sensitive to changes in the stiffness of the oval window, occurring as a result of changes in cochlear pressure. Increased stiffness of the oval window largely affects the transmission of sound from the cochlea at frequencies between 800 Hz and 1600 Hz. OAEs can be self-recorded in the laboratory or on the ISS using a handheld device. Our primary objectives regarding OAE measures in this experiment were to 1) validate this method during preflight testing of each crewmember (while sitting, supine and in head-down tilt position), and 2) determine if OAE measures (and presumably ICP) are responsive to lower body negative pressure and to spaceflight. METHODS: Distortion-product otoacoustic emissions (DPOAEs) and transient evoked otoacoustic emissions (TEOAEs) were recorded preflight using the Otoport Advance OAE system (Otodynamics Ltd., Hatfield, UK). Data were collected in four conditions (seated, supine, 15 degrees head down tilt (HDT), and 15 degrees HDT with lower body negative pressure (LBNP)) to produce a range of ICP in each subject and test the susceptibility of OAEs to LBNP. LBNP was induced using the Russian Chibis suit to produce the same fit and pressures that would be experienced inflight during Chibis LBNP trials. Similar trials have occurred inflight on the ISS. A comparative analysis of preflight and inflight phase measurements and magnitudes was completed in both broad and narrow band frequency ranges. RESULTS: TEOAE data demonstrated notable phase shifts from 859-1640 Hz when the seated baseline condition is compared to supine, HDT, and HDT plus Chibis conditions. Changes were particularly pronounced at low frequencies and were consistent with the expected ICP changes. Preflight DPOAE magnitude data revealed changes consistent with increased ICP in two conditions at 1414 Hz, where a magnitude change (relative to the seated condition) was seen in the HDT position and in HDT plus Chibis. DISCUSSION: OAEs revealed systematic changes in phase and magnitude throughout all test conditions (including use of Chibis LBNP) that were consistent with ICP changes. Results indicate that OAEs may provide a rapid noninvasive means of monitoring ICP changes. The first two subjects are projected to complete inflight testing on the ISS in early 2016, with the full complement of 10 subjects scheduled to be complete in 2018.

Melgoza, R.↗

Passive Neutron Instrumentation and Applications

This chapter presents a description of most of the instruments that are currently in use for the measurement of plutonium and uranium using passive methods (without an external source). This includes the acquisition electronics as well as Singles counting methods, coincidence counting methods and multiplicity counting methods. The Singles counting applications include the measurement of waste and curium bearing materials. The coincidence counting applications include bulk plutonium, bulk uranium, waste and holdup measurements and fresh fuel assemblies. The multiplicity application description includes advantages and disadvantages and multiplicity detector design. There is also a description of some non-3He systems. The chapter concludes with a description of additional concepts: neutron imagers, list-mode data analysis, distributed source term analysis, unattended monitoring and MCNP modeling for detector design.

Coincidence shift register↗

Acceleration of convergence by shifting the spectrum of implicit finite difference operators associated with the equations of gas dynamics

Eigensystem analysis techniques are applied to finite difference formulations of the Navier-Stokes equations in one dimension. Spectra of the resulting implicit difference operators are computed. The largest eigenvalues are calculated by using a combination of the Frechet derivative of the operators and Arnoldi's method. The accuracy of Arnoldi's method is tested by comparing the rate of convergence of the iterative method with the dominant eigenvalue of the original iteration matrix. On the basis of the pattern of eigenvalue distributions for various flow configurations, a shifting of the implicit operators in question is devised. This procedure has improved the rates of convergence of CFD codes by 20 - 50 percent.

Cheer, A.↗

Examples of State and Utility Actions on Proactive Planning and Investments

As states across the U.S. confront rising electricity demand, clean energy deployment, grid modernization imperatives, and the integration of large new loads, some regulators and utilities are shifting away from reactive, “just-in-time” investment approaches toward more proactive planning and investment frameworks. This report compiles examples of jurisdictional and utility actions that reshape planning processes, cost recovery mechanisms, and performance oversight to anticipate—rather than simply respond to—future grid needs. Several themes emerge from state actions examined in this report. First, legislatures and commissions are increasingly directing utilities to proactively upgrade their distribution and transmission systems, reflecting a shift toward a forward-looking system that aligns planning with state policy goals. Second, states are establishing long-term, iterative planning frameworks that often feature multi-year horizons, biannual or annual compliance reporting, structured opportunities for stakeholder engagement, and emphasis on collaboration among utilities, regulators, and stakeholders. Third, states are actively investigating innovative cost recovery mechanisms designed to support accelerated electrification and grid modernization, while balancing consumer advocates’ concerns regarding the ratepayer financial risks of premature investments. Fourth, performance metrics and reporting requirements are being developed to ensure transparency and accountability for proactive investments. Fifth, methodological improvements in planning—such as aligning load forecasting assumptions, incorporating sensitivities, and considering load management potential across building, vehicles, storage, and demand response—are recurring areas of stakeholder focus across jurisdictions. Overall, these developments signify a growing recognition among state regulators, utilities, and stakeholders that proactive planning—supported by clear definitions, consistent and transparent methodologies, robust performance metrics, and innovative cost recovery mechanisms—is a tool that can be used to address the scale and urgency of contemporary grid needs.

electricity market↗

Phenomenology of bubble size distributions in a first-order phase transition

In a cosmological first-order phase transition (FOPT), the true and false vacuum bubble radius distributions are not expected to be monochromatic, as is usually assumed. Consequently, Fermi balls (FBs) and primordial black holes (PBHs) produced in a dark FOPT will have extended mass distributions. We show how gravitational wave (GW), microlensing and Hawking evaporation signals for extended bubble radius/mass distributions deviate from the case of monochromatic distributions. The peak of the GW spectrum is shifted to lower frequencies, and the spectrum is broadened at frequencies below the peak frequency. Thus, the radius distribution of true vacuum bubbles introduces another uncertainty in the evaluation of the GW spectrum from a FOPT. The extragalactic gamma-ray signal at AMEGO-X/e-ASTROGAM from PBH evaporation may evince a break in the power-law spectrum between 5 MeV and 10 MeV for an extended PBH mass distribution. Optical microlensing surveys may observe PBH mass distributions with average masses below 10 -10 M ⊙ , which is not possible for monochromatic mass distributions. This expands the FOPT parameter space that can be explored with microlensing.

Marfatia, Danny [Univ. of Hawaii at Manoa, Honolul↗

Intermediate energy physics, volume I

Conference on proton, pion, and muon interactions - phase shift analyses of pion-nucleon and nucleon-nucleon scattering, charge distributions and pion decay into gamma rays

SPECTROSCOPY↗

A near X-point charge exchange neutral spectroscopy (CENS) system for DIII-D

A 16 channel spectroscopy system has been installed on DIII-D to provide information about the energy distribution of the atomic neutrals using the Doppler shift and broadening of passive Balmer-α emission. Here, the lines of sight are dominantly in the toroidal direction, with tangencies near the lowest point on closed magnetic flux surfaces moving from the lower divertor upward into the confined plasma. This allows the system to provide details of the neutrals as they undergo various atomic physics processes while traveling upward from the lower divertor. The spectrally resolved measurements provide several advantages that complement typical optical filter based measurements of hydrogenic spectral lines. These include more direct measurements of the neutrals that fuel deeper in the plasma and capturing neutral velocity distribution information via the Doppler broadened and shifted line. In addition, the spectral separation of higher energy “thermal” neutrals and bright cold emission from the scrape-off layer allows for a more straightforward calculation of the underlying neutral densities based on the emission because of the dependence of the thermal emission on confined plasma properties that are approximately flux functions and well measured.

Atomic and molecular physics↗

Superstructure Optimization of Waste Plastic Pyrolysis, Integrating Thermal, Catalytic, and Plasma Technologies with Machine Learning

Global plastic waste generation exceeds 430 million tonnes per year, yet fewer than 9% are recycled in the United States. Pyrolysis offers a chemical recycling route at scale, but existing techno-economic and life cycle assessments fix product yields to single pure polymers, producing economic and environmental outputs that break down when the feed composition changes. Here, we present a superstructure optimization framework that addresses this by embedding a composition-aware random forest yield predictor, trained on 566 pyrolysis experiments, within a full-scale process simulation. Product distributions update automatically as feed allocation shifts across four reactor chemistries: conventional thermal, catalytic (HZSM-5), thermal oxo-degradation, and nonequilibrium CO2 plasma. The optimal superstructure achieves minimum selling prices of −0.56 to −0.76/kg feed and global warming potentials of −0.276 to −0.322 kg CO2-eq/kg feed across four commodity price scenarios, confirming profitable, carbon-negative operation without tipping fees. Carbon abatement costs of $\$$0.46 to $\$$1.25/kg CO2-eq are competitive with direct air capture. Sensitivity analysis shows that the catalytic-plasma split fraction is the single largest driver of both economic and climate performance, while hydrocracking allocation in the wax upgrading stage is emission-neutral across the full variable range. Mixed plastic waste streams, evaluated as composition-variable feedstocks rather than pure resins, are profitable and carbon-negative across realistic market conditions. These results give a quantitative basis for reactor selection, circular economy investment, and policy design targeting chemical recycling on a large scale.

Life cycle assessment↗

Weather and climate extremes in a changing Arctic

Weather and climate extremes are increasingly occurring in the Arctic. Here, in this Review, we evaluate historical and projected changes in rare Arctic extremes across the atmosphere, cryosphere and ocean and elucidate their driving mechanisms. Clear shifts occur in mean and extreme distributions after ~2000. For instance, pre-2000 to post-2000 observational probabilities of 1.5 standard deviation events increase by 20% for atmospheric heat waves, 76.7% for Atlantic layer warm events, 83.5% for Arctic sea ice loss and 62.9% for Greenland Ice Sheet melt extent — in many cases, low probability, rare extreme events in the early period become the norm in the latter period. These observed changes can be explained using a ‘pushing and triggering’ concept, representing interplay between external forcing and internal variability: long-term warming destabilizes the climate system and ‘pushes’ it to a new state, allowing subsequent variability associated with large-scale atmosphere–ocean–ice interactions and synoptic systems to ‘trigger’ extreme events over different timescales. Ongoing anthropogenic warming is expected to further increase the frequency and magnitude of extremes, such that simulated probabilities of 1.5 standard deviation events increase by 72.6% for atmospheric heat waves, 68.7% for Atlantic layer warm events and 93.3% for Greenland Ice Sheet melt rate between historic (1984–2014) and future (2069–2099) periods under a very high emission scenario. Future research should prioritize the development of physically based metrics, enhance high-resolution observation and modelling capabilities and improve understanding of multiscale Arctic climate drivers.

atmospheric dynamics↗

Cabibbo-Kobayashi-Maskawa unitarity deficit reduction via finite nuclear size

We revisit the extraction of the |𝑉 𝑢⁢𝑑 | Cabibbo-Kobayashi-Maskawa (CKM) matrix element from the superallowed transition decay rate of 26⁢𝑚 Al → 26 Mg, focusing on finite nuclear size effects. The decay rate dependence on the 26⁢𝑚 Al charge radius is found to be four times higher than previously believed, necessitating precise determination. However, for a short-lived isotope of an odd 𝑍 element such as 26⁢𝑚 Al , radius extraction relies on challenging many-body atomic calculations. We performed the needed calculations, finding an excellent agreement with previous ones, which used a different methodology. This sets a new standard for the reliability of isotope shift factor calculations in many-electron systems. The ℱ⁡𝑡 value obtained from our analysis is lower by 2.2𝜎 than the corresponding value in the previous critical survey, resulting in an increase in |𝑉 𝑢⁢𝑑 | 2 by 0.9𝜎. Adopting |𝑉 𝑢⁢𝑑 | from this decay alone reduces the CKM unitarity deficit by one standard deviation, irrespective of the choice of |𝑉 𝑢⁢𝑠 |.

beta-decay↗

Virtual Power Plant Architecture and Resilient Design

Virtual Power Plants (VPPs) represent a fundamental shift in electric grid operations, aggregating distributed energy resources (DERs) such as solar panels and battery storage to deliver utility-scale grid services traditionally provided by centralized power plants. This report examines the unique architectural, operational, and digital assurance considerations that distinguish VPPs from conventional utility infrastructure as they scale from pilot projects to mainstream deployment across the United States. While VPPs offer significant opportunities for grid modernization and enhanced flexibility, their distributed, multi-stakeholder architecture introduces distinct security challenges that differ fundamentally from traditional generation facilities. The analysis identifies risks in VPP operations, including device-level security gaps, platform vulnerabilities, and communication protocol weaknesses that create expanded attack surfaces compared to centralized power plants. Through examination of real-world incidents and emerging threat patterns, the report demonstrates how some VPPs' reliance on consumer-owned devices, public internet infrastructure, and complex vendor ecosystems require new approaches to digital assurance and operational security. The findings provide practical guidance for utilities, regulators, and aggregators to implement robust security frameworks and operational best practices essential for maintaining grid reliability as VPP deployment accelerates under the Federal Energy Regulatory Commission (FERC) Order 2222 and related regulatory initiatives.

24 - POWER TRANSMISSION AND DISTRIBUTION↗