Search NASA⌕ Search

SEARCH · Search NASA

Results for “drag estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Economy of flight at supersonic speeds

Prandtl's theory is used to determine the airflow over bodies and wings adapted to supersonic flight. By making use of these results, and by incorporating in them an allowance for the probable skin friction, some estimates of expected lift-drag ratios are made for various flight speeds with the best configuration. At each speed a slender body and wings having the best angle of sweepback are considered. For the range of supersonic speeds shown an airplane of normal density and loading would be required to operate at an altitude of the order of 60,000 feet. The limiting value of 1-1/2 times the speed of sound corresponds to a flight speed of 1000 miles per hour. At this speed about 1.5 miles per gallon of fuel are expected. It is interesting to note that this value corresponds to a value of more than 15 miles per gallon when the weight is reduced to correspond to that of an ordinary automobile.

Jones, R. T.↗
NASA NTRS1977

Aircraft aerodynamics at high angles of attack

AEROX program estimates aircraft aerodynamics to high angles of attack (up to sixty degrees). It estimates coefficients of lift, induced drag, and pitching moment for wings and wing body combinations with or without aft horizontal tail. Both trimmed and untrimmed characters are calculated.

Axelson, J. A.↗
NASA NTRS1992

Variable-complexity aerodynamic optimization of an HSCT wing using structural wing-weight equations

A new approach for combining conceptual and preliminary design techniques for wing optimization is presented for the high-speed civil transport (HSCT). A wing-shape parametrization procedure is developed which allows the linking of planform and airfoil design variables. Variable-complexity design strategies are used to combine conceptual and preliminary-design approaches, both to preserve interdisciplinary design influences and to reduce computational expense. In the study, conceptual-design-level algebraic equations are used to estimate aircraft weight, supersonic wave drag, friction drag and drag due to lift. The drag due to lift and wave drag are also evaluated using more detailed, preliminary-design-level techniques. The methodology is applied to the minimization of the gross weight of an HSCT that flies at Mach 3.0 with a range of 6500 miles.

Hutchison, M. G.↗
NASA NTRS2017

Nonlinear Large Deflection Theory with Modified Aeroelastic Lifting Line Aerodynamics for a High Aspect Ratio Flexible Wing

This paper investigates the effect of nonlinear large deflection bending on the aerodynamic performance of a high aspect ratio flexible wing. A set of nonlinear static aeroelastic equations are derived for the large bending deflection of a high aspect ratio wing structure. An analysis is conducted to compare the nonlinear bending theory with the linear bending theory. The results show that the nonlinear bending theory is length-preserving whereas the linear bending theory causes a non-physical effect of lengthening the wing structure under the no axial load condition. A modified lifting line theory is developed to compute the lift and drag coefficients of a wing structure undergoing a large bending deflection. The lift and drag coefficients are more accurately estimated by the nonlinear bending theory due to its length-preserving property. The nonlinear bending theory yields lower lift and span efficiency than the linear bending theory. A coupled aerodynamic-nonlinear finite element model is developed to implement the nonlinear bending theory for a Common Research Model (CRM) flexible wing wind tunnel model to be tested in the University of Washington Aeronautical Laboratory (UWAL). The structural stiffness of the model is designed to give about 10% wing tip deflection which is large enough that could cause the nonlinear deflection effect to become significant. The computational results show that the nonlinear bending theory yields slightly less lift than the linear bending theory for this wind tunnel model. As a result, the linear bending theory is deemed adequate for the CRM wind tunnel model.

Aeroelasticity↗
NASA NTRS2016

Attitude Control System Design for CubeSats Configured with Exo-Brake Parachute

This paper develops a novel attitude control strategy for an Earth orbiting CubeSat spacecraft by utilizing the exo-brake parachute to modulate the atmospheric drag forces as a source of attitude control authority, enabling orbital exo-sail maneuvers. In particular, the spacecraft attitude controls can be realized through the two dimensional exo-sail maneuvers in pitch and yaw directions. The uncertain atmospheric drag induced disturbance torque is estimated through an adaptive parameter estimation process which makes use of the adaptive least-squares minimization techniques. The covariance updating law with a variable forgetting factor is adopted and it can be shown that the convergent rate for the estimation errors can be chosen at the same level as the forgetting factor, in order to meet the design needs. The proposed approach is best suited for Earth orbiting micronano-satellite applications, which are configured with exo-brake parachute. With integration of exo-sail actuation mechanism and disturbance estimation, we demonstrate through simulations that exo-sail induced control torque for CubeSat attitude maneuver is feasible.

Disturbance estimation↗
NASA NTRS1984

Electrodynamic Tethers. 1: Power Generator in LEO. 2: Thrust for Propulsion and Power Storage

An electrodynamic tether consists of a long insulated wire in space whose orbital motion cuts across lines of magnetic flux to produce an induce voltage that in typical low orbits averages about 200 v/km. Such a system should be capable of generating substantial electrical power, at the expense of IXB drag acting on its orbital energy. If a reverse current is driven against the induced voltage, the system should act as a motor producing IXB thrust. A reference system was designed, capable of generating 20 KW of power into an electrical load located anywhere along the wire at the expense of 2.6N (20,000 J/sec) drag on the wire. In an ideal system, the conversion between mechanical and electrical energy would reach 100% efficiency. In the actual system part of the 20 KW is lost to internal resistance of the wire, plasma and ionosphere, while the drag force is increased by residual air drag. The 20 KW PMG system as designed is estimated to provide 18.7 KW net power to the load at total drag loss of 20.4 KJ/sec, or an overall efficiency of 92%. Similar systems using heavier wire appear capable of producing power levels in excess of 1 Megawatt at voltages of 2-4 KV, with conversion efficiency between mechanical and electrical power better than 95%. The hollow cathode based system should be readily reversible from generator to motor operation by driving a reverse current using onboard power.

Mccoy, J. E.↗
NASA NTRS1975

Nacelle drag reduction: An analytically-guided experimental program

Modifications are proposed to standard estimating procedures, as well as the BODY computer program, which predict that the drag of two nacelles will equal the drag of the fuselage. A preliminary computer analysis that considers increased dimensions for the nacelle forebody so that the noise is relatively less blunt indicates a reduction in form drag much greater than the increase in skin friction drag attributable to increased surface area.

Smetana, F. O.↗
NASA NTRSDate not supplied

The Effect of Drag Model on Heatshield Recession due to Particle Impacts for Martian Spacecraft

A spacecraft entering the Martian atmosphere during a dust storm may experience recession to the heatshield due to dust particle impacts. Aerodynamic drag is the primary force that determines the trajectory of the dust particles through the shock layer. This paper examines the effect of particle drag model on the heatshield recession. Three particle drag models are assessed including two that are intended to be applicable over a wide range of particle flow conditions. Particle trajectories are computed in conditions measured during the 2007 major global dust storm. It was found that accounting for Knudsen number and compressibility effects made a large difference in the estimated particle impact velocity. The two drag models that were valid for transitional, compressible particle flow environments predicted only slightly-different amounts of heatshield recession due to dust particle impacts. A brief description of the effects of non-spherical particles on drag coefficients is provided.

Heatshield↗
NASA NTRSDate not supplied

The Effect of Drag Model on Heatshield Recession due to Particle Impacts for Martian Spacecraft

A spacecraft entering the Martian atmosphere during a dust storm may experience recession to the heatshield due to dust particle impacts. Aerodynamic drag is the primary force that determines the trajectory of the dust particles through the shock layer. This paper examines the effect of particle drag model on the heatshield recession. Three particle drag models are assessed including two that are intended to be applicable over a wide range of particle flow conditions. Particle trajectories are computed in conditions measured during the 2007 major global dust storm. It was found that accounting for Knudsen number and compressibility effects made a large difference in the estimated particle impact velocity. The two drag models that were valid for transitional, compressible particle flow environments predicted only slightly-different amounts of heatshield recession due to dust particle impacts. A brief description of the effects of non-spherical particles on drag coefficients is provided.

Heatshield↗
NASA NTRS1947

Flight Tests of Rocket-Powered "Tin-Can" Models of AAF Project MX-800

Flight tests were made of six noninstrumented rocket-powered "Tin Can" models of AAF Project MX-800. Velocity and drag data were obtained by use of CU Doppler radar. The existence of stability and adequate structural strength for flight near zero lift was checked by visual and photographic observation. Drag data obtained during the tests agreed reasonably well with estimates based on experimental data from NACA RM-2 rocket-powered drag research models.

Purser, Paul E.↗
NASA NTRS1989

Sound power spectrum and wave drag of a propeller in flight

Theory is presented for the sound power and sound power spectrum of a single rotation propeller in forward flight. Calculations are based on the linear wave equation with sources distributed over helicoidal surfaces to represent effects of blade thickness and steady loading. Sound power is distributed continuously over frequecy, as would be expected from Doppler effects, rather than in discrete harmonics. The theory is applied to study effects of sweep and Mach number in propfans. An acoustic efficiency is defined as the ratio of radiated sound power to shaft input power. This value is the linear estimate of the effect of wave drag due to the supersonic blade section speeds. It is shown that the acoustic efficiency is somewhat less than 1 percent for a well designed propfan.

Hanson, D. B.↗
NASA NTRS1988

Wave drag and high-speed performance of supersonic STOVL fighter configurations

A supersonic STOVL fighter aircraft aerodynamic research program is being conducted at NASA Ames Research Center. The research focuses on technology development for this type of aircraft and includes generating an extensive aerodynamic database and resolving particular aerodynamic uncertainties for various twin- and single-engine aircraft concepts. Highlights of the results from this program are presented. The highlights include propulsion-induced effects on the aircraft drag, prediction capabilities, volume integration for minimizing drag, and wave drag and aerodynamic efficiency comparisons. Results indicate that estimated STOVL fighter performance is roughly comparable to the performance of modern conventional fighters in terms of wave drag and aerodynamic efficiency.

Durston, Donald A.↗
NASA NTRS1988

Wave Drag and High-speed Performance of Supersonic STOVL Fighter Configuration

A supersonic STOVL fighter aircraft aerodynamic research program is under way at NASA Ames Research Center. The research focuses on technology development for this type of aircraft and includes generating an extensive aerodynamic database and resolving particular aerodynamic uncertainties for various twin- and single-engine aircraft concepts. Highlights of the results from this program are presented. The highlights include propulsion-induced effects on the aircraft drag, prediction capabilities, volume integration for minimizing drag, and wave drag and aerodynamic efficiency comparisons. Results indicate that estimated STOVL fighter performance is roughly comparable to the performance of modern conventional fighters in terms of wave drag and aerodynamic efficiency.

Durston, Donald A.↗
NASA NTRS1996

Development of a real-time transport performance optimization methodology

The practical application of real-time performance optimization is addressed (using a wide-body transport simulation) based on real-time measurements and calculation of incremental drag from forced response maneuvers. Various controller combinations can be envisioned although this study used symmetric outboard aileron and stabilizer. The approach is based on navigation instrumentation and other measurements found on state-of-the-art transports. This information is used to calculate winds and angle of attack. Thrust is estimated from a representative engine model as a function of measured variables. The lift and drag equations are then used to calculate lift and drag coefficients. An expression for drag coefficient, which is a function of parasite drag, induced drag, and aileron drag, is solved from forced excitation response data. Estimates of the parasite drag, curvature of the aileron drag variation, and minimum drag aileron position are produced. Minimum drag is then obtained by repositioning the symmetric aileron. Simulation results are also presented which evaluate the affects of measurement bias and resolution.

Gilyard, Glenn↗
NASA NTRS1988

Meteorites on Mars

Four types of meteoritic material should be found on Mars: (1) micrometeorites, many of which will survive atmospheric entry unmelted, which should fall relatively uniformly over the planet's surface, (2) ablation products from larger meteorites which ablate, break up and burn up in the Mars atmosphere, (3) debris from large, crater forming objects, which, by analogy to terrestrial and lunar impact events, will be concentrated in the crater ejecta blankets (except for rare, large events, such as the proposed C-T event on earth, which can distribute debris on a planetary scale), and (4) debris from the early, intense bombardment, which, in many areas of the planet, may now be incorporated into rocks by geologic processes subsequent to the intense bombardment era. To estimate the extent of meteoritic addition to indigenous Martian material, the meteoritic flux on Mars must be known. It is estimated that the overall flux is twice that for the Moon and 1.33 that for Earth. For small particles, whose orbital evolution is dominated by Poynting Robertson drag, the flux at Mars can be estimated from the Earth flux. The smaller Martian gravitational enhancement as well as the decrease in the spatial density of interplanetary dust with increasing heliocentric distance should reduce the flux of small particles at Mars to about 0.33 times the flux at Earth. Because of the smaller planetary cross-section the total infalling mass at Mars is then estimated to be 0.09 time the infalling mass in the micrometeorite size range at Earth.

Flynn, G. J.↗
NASA NTRS1993

Identification of integrated airframe-propulsion effects on an F-15 aircraft for application to drag minimization

The application of an adaptive real-time measurement-based performance optimization technique is being explored for a future flight research program. The key technical challenge of the approach is parameter identification, which uses a perturbation-search technique to identify changes in performance caused by forced oscillations of the controls. The controls on the NASA F-15 highly integrated digital electronic control (HIDEC) aircraft were perturbed using inlet cowl rotation steps at various subsonic and supersonic flight conditions to determine the effect on aircraft performance. The feasibility of the perturbation-search technique for identifying integrated airframe-propulsion system performance effects was successfully shown through flight experiments and postflight data analysis. Aircraft response and control data were analyzed postflight to identify gradients and to determine the minimum drag point. Changes in longitudinal acceleration as small as 0.004 g were measured, and absolute resolution was estimated to be 0.002 g or approximately 50 lbf of drag. Two techniques for identifying performance gradients were compared: a least-squares estimation algorithm and a modified maximum likelihood estimator algorithm. A complementary filter algorithm was used with the least squares estimator.

Schkolnik, Gerald S.↗
NASA NTRS1993

Identification of integrated airframe: Propulsion effects on an F-15 aircraft for application to drag minimization

The application of an adaptive real-time measurement-based performance optimization technique is being explored for a future flight research program. The key technical challenge of the approach is parameter identification, which uses a perturbation-search technique to identify changes in performance caused by forced oscillations of the controls. The controls on the NASA F-15 highly integrated digital electronic control (HIDEC) aircraft were perturbed using inlet cowl rotation steps at various subsonic and supersonic flight conditions to determine the effect on aircraft performance. The feasibility of the perturbation-search technique for identifying integrated airframe-propulsion system performance effects was successfully shown through flight experiments and postflight data analysis. Aircraft response and control data were analyzed postflight to identify gradients and to determine the minimum drag point. Changes in longitudinal acceleration as small as 0.004 g were measured, and absolute resolution was estimated to be 0.002 g or approximately 50 lbf of drag. Two techniques for identifying performance gradients were compared: a least-squares estimation algorithm and a modified maximum likelihood estimator algorithm. A complementary filter algorithm was used with the least squares estimator.

Schkolnik, Gerard S.↗