Search NASA⌕ Search

SEARCH · Search NASA

Results for “effective sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Non-Monotonic Response of the Climate System to Abrupt CO2 Forcing

We explore the climate system response to abrupt CO2 forcing, spanning the range 1 × to 8×CO2, with two state-of-the-art coupled atmosphere-ocean-sea-ice-land models: the NASA Goddard Institute for Space Studies Model E2.1-G (GISS-E2.1-G) and the Community Earth System Model (CESM-LE). We find that the effective climate sensitivity is a non-monotonic function of CO2 in both models, reaching a minimum at 3×CO2 for GISS-E2.1-G, and 4×CO2 for CESM-LE. A similar non-monotonic response is found in Northern Hemisphere surface temperature, sea-ice, precipitation, the latitude of zero precipitation minus-evaporation, and the strength of the Hadley cell. Interestingly, the Atlantic meridional overturning circulation collapses when non-monotonicity appears and does not recover for larger CO2 forcings. Analyzing the climate response over the same CO2 range with slab ocean versions of the same models, we demonstrate that the climate system's non-monotonic response is linked to ocean dynamics.

Non-monotonic response↗
NASA NTRS2020

GISS‐E2.1: Configurations and Climatology

This paper describes the GISS‐E2.1 contribution to the Coupled Model Intercomparison Project, Phase 6 (CMIP6). This model version differs from the predecessor model (GISS‐E2) chiefly due to parameterization improvements to the atmospheric and ocean model components, while keeping atmospheric resolution the same. Model skill when compared to modern era climatologies is significantly higher than in previous versions. Additionally, updates in forcings have a material impact on the results. In particular, there have been specific improvements in representations of modes of variability (such as the Madden‐Julian Oscillation and other modes in the Pacific) and significant improvements in the simulation of the climate of the Southern Oceans, including sea ice. The effective climate sensitivity to 2xCO2 is slightly higher than previously at 2.7‐‐3.1°C (depending on version), and is a result of lower CO2 radiative forcing and stronger positive feedbacks.

General Circulation Model↗
NASA NTRS2007

Visual end-effector position error compensation for planetary robotics

This paper describes a vision-guided manipulation algorithm that improves arm end-effector positioning to subpixel accuracy and meets the highly restrictive imaging and computational constraints of a planetary robotic flight system. Analytical, simulation-based, and experimental analyses of the algorithm's effectiveness and sensitivity to camera and arm model error is presented along with results on several prototype research systems and ground-in-the-loop technology experiments on the Mars Exploration Rover (MER) vehicles. A computationally efficient and robust subpixel end-effector fiducial detector that is instrumental to the algorithm's ability to achieve high accuracy is also described along with its validation results on MER data.

Nickels, Kevin↗
NASA NTRS2017

Precision Projector Laboratory: Detector Characterization with an Astronomical Emulation Testbed

As astronomical observations benefit from improved sensitivity, the effectiveness of scientific programs is becoming limited by systematics that often originate in poorly understood image sensor behavior. Traditional, bottom-up detector characterization methods provide one way to model underlying detector physics, and generate ever more faithful numerical simulations, but this approach is vulnerable to preconceptions and over-simplification. The alternative top-down approach is laboratory emulation, which enables observation, calibration, and analysis scenarios to be tested without relying on a complete understanding of the underlying physics. This complements detector characterization and simulation efforts by testing their validity. We describe a laboratory facility and experimental testbed that supports the emulation of a wide range of mission concepts such as gravitational weak lensing measurements by WFIRST and high precision spectrophotometry of transiting exoplanets by JWST. An Offner relay projects readily customizable "scenes" (e.g. stars, galaxies, spectra) with very low optical aberration over the full area of a typical optical or near infrared image sensor. f/8 and slower focal ratios may be selected, spanning those of most proposed space missions and approximating the point spread function (PSF) size of seeing limited ground based surveys. Diffraction limited PSFs are projected over a wide field of view and wavelength range to deliver highly predictable image patterns down to sub-pixel scales with stable intensity and fine motion control. The testbed enables realistic validation of detector performance on science-like images, which aids mission design and survey strategy, as well as targeted investigations of various detector effects.

Seshadri, Suresh↗
NASA NTRS2022

Extratropical Shortwave Cloud Feedbacks in the Context of the Global Circulation and Hydrological Cycle

Shortwave (SW) cloud feedback (SW FB ) is the primary driver of uncertainty in the effective climate sensitivity (ECS) predicted by global climate models (GCMs). ECS for several GCMs in the Sixth Coupled Model Intercomparison Project (CMIP6) exceed 5K, above the fifth assessment report (AR5) ‘likely’ maximum (4.5K) due to extratropical SW FB ’s that are more positive than those simulated in previous generation CMIP5 GCMs. Here we show that across 57 GCMs Southern Ocean SW FB can be predicted from the sensitivity of column-integrated liquid water mass LWP) to moisture convergence and to surface temperature. The response of LWP to moisture convergence and the response of albedo to LWP anti-correlate across GCMs. This is because GCMs that simulate a larger response of LWP to moisture convergence tend to have higher mean-state LWPs, which reduces the impact of additional LWP on albedo. Observational constraints suggest a modestly negative Southern Ocean SW FB — inconsistent with extreme ECS.

extratropical cloud response↗
NASA NTRS2022

Asymmetric Warming/Cooling Response to CO2 Increase/Decrease Mainly Due to Non-Logarithmic Forcing, not Feedbacks

We explore the CO2 dependence of effective climate sensitivity (SG) with symmetric abrupt and transient CO2 forcing, spanning the range 1/8×, 1/4×, 1/2×, 2×, 4×, and 8×CO2, using two state-of-the-art fully coupled atmosphere-ocean-sea-ice-land models. In both models, under abrupt CO2 forcing, we find an asymmetric response in surface temperature and SG. The surface global warming at 8×CO2 is more than one third larger than the corresponding cooling at 1/8×CO2, and SG is CO2 dependent, increasing non-monotonically from 1/8×CO2 to 8×CO2. We find similar CO2 dependence in the transient runs, forced with -1%yr−1CO2 and +1%yr−1CO2 up to 1/8×CO2 and 8×CO2, respectively. The non-logarithmic radiative forcing – not the changing feedbacks – primarily explains the dependence of SG on CO2, particularly at low CO2 levels. The changing feedbacks, however, explain SG’s non-monotonic behavior.

climate sensitivity↗
NASA NTRS1998

Shear-Sensitive Liquid Crystal Coating Method: Surface-Inclination Effects on Shear Vector Measurements

The shear-sensitive liquid crystal coating (SSLCC) method is an image-based technique for both visualizing dynamic surface-flow phenomena, such as transition and separation, and for measuring the continuous shear-stress vector distribution acting on an aerodynamic surface. Under proper lighting and viewing conditions (discussed below), the coating changes color in response to an applied aerodynamic shear. This color-change response is continuous and reversible, with a response time of milliseconds, and is a function of both the shear magnitude and the shear vector orientation relative to the observer. The liquid crystal phase of matter is a weakly-ordered, viscous, non-Newtonian fluid state that exists between the nonuniform liquid phase and the ordered solid phase of certain organic compounds. Cholesteric liquid crystal compounds possess a helical molecular arrangement that selectively scatters white light, incident along the helical axis, as a three-dimensional spectrum. This property is linked to the helical pitch length, which is within the range of wavelengths in the visible spectrum. The pitch length, and hence the wavelength of the scattered light, is influenced by shear stress normal to the helical axis. This unique optical property produces a measurable color change in response to an applied shearing force. The full-surface shear stress vector measurement method, developed at NASA-Ames, is schematically illustrated. As with the visualization method, the coated test surface is illuminated from the normal direction with white light and the camera is positioned at an above-plane view angle of approximately 30 deg. Experiments have been initiated at NASA Ames to begin the process of quantifying surface-inclination (surface-curvature) effects on shear vector measurement accuracy. In preliminary experiments, surface-inclination angles theta(sub x), theta(sub y) of 0, +/-5, +/-10, and +/-15 deg were employed. In this arrangement, white-light illumination was positioned normal to the untilted test surface, and the camera above-plane view angle was set at 30 deg relative to the untilted test surface. As can be seen, vector-aligned lambda(sub d) values showed no dependence on theta(sub x) or theta(sub y) for absolute values of these tilt angles is less than or equal to 15 deg. Acquisition and analyses of full-surface color images are presently underway to definitively document the insensitivity limits of the shear vector measurement methodology to surface-slope variations.

Reda, Daniel C.↗
NASA NTRS1992

Increased response of the reversal electron attachment detector and modeling of ion space-charge effects

Design and sensitivity tests of a modified version of the so-called reversal electron attachment detector (READ) are presented. The new version uses a spherical cathode capable of emitting higher electron currents. As in the original READ (which used a planar emitter) electrons are focused into an electrostatic mirror which reverses their trajectories. In the reversal region electrons have essentially zero energy and attach to target molecules to form negative ions. The electron gun lens system has been modified using a field and trajectory code with space charge included. Electron trajectories have been calculated for 1-mA current focused into a reversal region of 3.5-mm diameter. The detection limit of the apparatus is approximately 25 times lower than for the original READ. Nonlinearity in the measured signal vs electron current is described by a model in which a spherical ball of ions expands outward with velocity determined by the space-charge force and the initial velocity of ion formation.

Boumsellek, S.↗
NASA NTRS1992

Effect of spatial resolution on apparent sensitivity to initial conditions of a decaying flow as it becomes turbulent

In order to check for spurious chaos and obtain superior solutions for decaying Navier-Stokes flows, an investigation is conducted of the effect of spatial resolution on numerical results. The fourth-order finite difference method results obtained with grids of 32-cubed and 64-cubed points, and those of a pseudospectral method for 128-cubed points, indicate that the sensitivity of initially neighboring solutions to small changes in initial conditions increases with improving spatial resolution.

Deissler, Robert G.↗
DOE OSTI2025

Influences of shock imprinting on mix in a 3D-printed porous media

Mixing of materials in porous media can cause a significant impact on fusion yield as previously demonstrated by the National Ignition Facility (NIF) MARBLE Campaign. Initially, the reactants are separated, with deuterium in the lattice struts and a tritium gas fill in the voids. Lattice parameters such as the strut thickness and relative pitch, provide a control for the mix parameters in the experiment. Los Alamos National Laboratory’s (LANL) BOSQUE project looks to better understand how the mix of the reactants and shell materials impact the fusion burn and resultant yield on various laser platforms. xRAGE’s Eulerian hydrodynamics and adaptive mesh refinement (AMR) provide the unique ability to study the impacts of multiscale features of complex lattice structures. This modeling provides the ability to measure shock front variations as the wave progress’ through a given media. Initial conditions of the lattice are essential to accurately model mix and burn measured by experiment. By varying the initial orientation and densities of these lattice regions the early time dynamics of how the shock is launched into the system is changed and advocates for the study of resulting effects. In this work, we will study the sensitivities of shock effects in varying 3D printed geometric systems and how these shocks alter the structure and mix in the lattice. We will discuss both preliminary experimental results and simulations to help plan and constrain future experiments where we will study the impact of different lattice geometries and lattice bulk densities. This work concludes with the relative impacts of lattice geometries on shock speeds at different bulk densities and the resultant mix widths due to those shock interactions. We see agreement with theory at the higher end of our bulk density study, however, as we approach lower bulk density systems the dynamics of these interactions begin to change.

2 Photon Polymerization↗
NASA NTRS2000

Test Cases for a Rectangular Supercritical Wing Undergoing Pitching Oscillations

Steady and unsteady measured pressures for a Rectangular Supercritical Wing (RSW) undergoing pitching oscillations have been presented. From the several hundred compiled data points, 27 static and 36 pitching oscillation cases have been proposed for computational Test Cases to illustrate the trends with Mach number, reduced frequency, and angle of attack. The wing was designed to be a simple configuration for Computational Fluid Dynamics (CFD) comparisons. The wing had an unswept rectangular planform plus a tip of revolution, a panel aspect ratio of 2.0, a twelve per cent thick supercritical airfoil section, and no twist. The model was tested over a wide range of Mach numbers, from 0.27 to 0.90, corresponding to low subsonic flows up to strong transonic flows. The higher Mach numbers are well beyond the design Mach number such as might be required for flutter verification beyond cruise conditions. The pitching oscillations covered a broad range of reduced frequencies. Some early calculations for this wing are given for lifting pressure as calculated from a linear lifting surface program and from a transonic small perturbation program. The unsteady results were given primarily for a mild transonic condition at M = 0.70. For these cases the agreement with the data was only fair, possibly resulting from the omission of viscous effects. Supercritical airfoil sections are known to be sensitive to viscous effects (for example, one case cited). Calculations using a higher level code with the full potential equations have been presented for one of the same cases, and with the Euler equations. The agreement around the leading edge was improved, but overall the agreement was not completely satisfactory. Typically for low-aspect-ratio rectangular wings, transonic shock waves on the wing tend to sweep forward from root to tip such that there are strong three-dimensional effects. It might also be noted that for most of the test, the model was tested with free transition, but a few points were taken with an added transition strip for comparison. Some unpublished results of a rigid wing of the same airfoil and planform that was tested on the pitch and plunge apparatus mount system (PAPA) showed effects of the lower surface transition Strip on flutter at the lower subsonic Mach numbers. Significant effects of a transition strip were also obtained on a wing with a thicker supercritical section on the PAPA mount system. Both of these flutter tests on the PAPA resulted in very low reduced frequencies that may be a factor in this influence of the transition strip. However, these results indicate that correlation studies for RSW may require some attention to the estimation of transition location to accurately treat viscous effects. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. An overview of the model and tests is given and the standard formulary for these data is listed. Sample data points are presented in both tabular and graphical form. A complete tabulation and plotting of all the Test Cases is given. Only the static pressures and the real and imaginary parts of the first harmonic of the unsteady pressures are available. All the data for the test are available in electronic file form. The Test Cases are also available as separate electronic files.

Bennett, Robert M.↗
NASA NTRS2001

Nonlinear Analysis and Scaling Laws for Noncircular Composite Structures Subjected to Combined Loads

Results from an analytical study of the response of a built-up, multi-cell noncircular composite structure subjected to combined internal pressure and mechanical loads are presented. Nondimensional parameters and scaling laws based on a first-order shear-deformation plate theory are derived for this noncircular composite structure. The scaling laws are used to design sub-scale structural models for predicting the structural response of a full-scale structure representative of a portion of a blended-wing-body transport aircraft. Because of the complexity of the full-scale structure, some of the similitude conditions are relaxed for the sub-scale structural models. Results from a systematic parametric study are used to determine the effects of relaxing selected similitude conditions on the sensitivity of the effectiveness of using the sub-scale structural model response characteristics for predicting the full-scale structure response characteristics.

Hilburger, Mark W.↗
NASA NTRS1995

Coronal magnetic field diagnostics via the Hanle effect of Lyman series lines

The magnetic field plays a major role in the physics of the solar corona. However, there are no direct measurements of this physical parameter. We describe a method that can provide the most direct determination of the vector magnetic field in the extended corona (i.e., at heliocentric heights between 1.2 R(solar radius) and 2.0 R(solar radius)). The method is based on polarimetric observations of UV lines of the Lyman series, that is, Lyman alpha (Ly-alpha), lambda 1216 A, Lyman beta (Ly-beta), lambda 1025 A, and Lyman gamma (Ly-gamma), lambda 972 A. These lines have a collisional and a resonantly scattered component. Linear polarization is induced in the resonant component by the anisotropy in the chromospheric radiation field that illuminates the corona. Magnetic fields can be suitably determined through the effects that they induce on this resonance polarization (Hanle effect). The Hanle effect of the Ly-alpha is sensitive to field strengths in the 10 - 100 gauss range. The resonance polarization of Ly-beta and Ly-gamma is sensitive, through the Hanle effect, to fields with strengths between 3 - 30 gauss, and 0.3 - 6 gauss, respectively. We describe a new method for separating the resonant from the collisional component of the Ly-beta and Ly-gamma; the method is based on the approximation, valid within 10%, that the collisional component of the Ly-alpha is negligible, in typical coronal conditions. From the intensity and the polarization of the resonant components of these Lyman lines, the strength and direction of coronal fields can be determined. We model the sensitivity of Hanle-effect diagnostics for different coronal structures (e.g., coronal holes and loops).

Fineschi, S.↗
NASA NTRS2014

The Effect of Experimental Variables on Industrial X-Ray Micro-Computed Sensitivity

A study was performed on the effect of experimental variables on radiographic sensitivity (image quality) in x-ray micro-computed tomography images for a high density thin wall metallic cylinder containing micro-EDM holes. Image quality was evaluated in terms of signal-to-noise ratio, flaw detectability, and feature sharpness. The variables included: day-to-day reproducibility, current, integration time, voltage, filtering, number of frame averages, number of projection views, beam width, effective object radius, binning, orientation of sample, acquisition angle range (180deg to 360deg), and directional versus transmission tube.

X-ray Computed Tomography↗