Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron energy distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Particle signatures of magnetic topology at the magnetopause: AMPTE/CCE observations

Electron distributions at energies above 50 eV have been found to be a sensitive indicator of magnetic topology for magnetopause crossings of the AMPTE/CCE spacecraft. Progressing from the magnetosheath to the magnetosphere two abrupt transitions occur. First, the magnetosheath electron population directed either parallel or antiparallel to the magnetic field is replaced by a streaming, heated magnetosheath electron population. The other half of the distribution is unchanged. The region with unidirectional, heated magnetosheath electrons is identified as the magnetosheath boundary layer (MSBL). Second, the unheated magnetosheath electron population is replaced by a heated population nearly identical to the population encountered in the MSBL, resulting in a symmetric counterstreaming distribution. The region populated by the bidirectional heated magnetosheath electrons is identified as the low-latitude boundary layer (LLBL). The MSBL and LLBL identified by the electron transitions are the same as the regions identified using ion composition measurements. The magnetosheath-MSBL transition reflects a change in magnetic topology from a solar wind field line to one that threads the magnetopause, and the existence of a magnetosheath-MSBL transition implies that the magnetopause is open. When the current layer is easily identified, the MSBL-LLBL transition coincides with the magnetopause current layer, indicating that the magnetosheath electrons are heated in the current layer. Both magnetosheath-MSBL and MSBL-LLBL transitions are observed for low as well as high magnetic shears. Moreover, the transitions are particularly clear for low shear implying that magnetic topology boundaries are sharp even when abrupt changes in the field and other plasma parameters are absent. Furthermore, for low magnetic shear, solar wind ions with low parallel drift speeds make up the majority of the LLBL population indicating that the magnetosheath plasma has convected directly across the magnetosheath plasma has converted directly across the magnetopause. These observations are consistent with quasi-steady, high-latitude reconnection and indicate that the signatures of this reconnection geometry are commonly present in the subpolar region.

Fuselier, S. A.↗
NASA NTRS1992

Hard x ray/microwave spectroscopy of solar flares

The joint study of hard x ray and microwave observations of solar flares is extremely important because the two complementary ways of viewing the accelerated electrons yield information that cannot be obtained using hard x rays or microwaves alone. The microwaves can provide spatial information lacking in the hard x rays, and the x ray data can give information on the energy distribution of electrons that remove ambiguities in the radio data. A prerequisite for combining the two data-sets, however, is to first understand which range of microwave frequencies correlate best with the hard x rays. This SMM Guest Investigator grant enabled us to combine multi-frequency OVRO data with calibrated hard x ray data to shed light on the relationship between the two emissions. In particular, the questions of which microwave frequencies correspond to which hard x ray energies, and what is the corresponding energy of the electrons that produce both types of emission are investigated.

Gary, Dale E.↗
NASA NTRS1972

Electron detachment of H- by e- collision.

An impact parameter method using Coulomb trajectories is applied to the calculation of cross sections for two electron detachment processes. The asymptotic behavior of the cross sections at high energies is investigated in detail. Energy distributions of ejected electrons at three different incident energies are also calculated. Some of the results obtained are compared with available experimental data.

Faisal, F. H. M.↗
NASA NTRS1997

Effective Collision Strengths for Electron Impact Excitation of Inelastic Transitions in S III

We have calculated electron collisional excitation strengths for all electric dipole forbidden, semi-forbidden, and allowed transitions among the lowest 17 LS states 3s(exp 2)3p(exp 2) P-3, D-1, S-1, 3s3p(exp 3)S-5(exp 0), D-3(exp 0), P-3(exp 0), P-1(exp 0), S-3(exp 0), D-1(exp 0), 3S(exp 2)3p3d D-1(exp 0), F-3(exp 0), P-3(exp 0), D-3(exp 0), F-3(exp 0), P-1(exp 0), and 3S(exp 2)3p4S P-3(exp 0), P-l(exp 0) of S III using the R-matrix method. These S m states are represented by fairly extensive configuration-interaction wave functions that yield excited state energies in close agreement with recent laboratory measurements. Rydberg series of resonances converging to the excited state thresholds are explicitly included in the scattering calculation. The effective collision strengths are determined assuming Maxwellian distribution of electron energies. These are listed over a wide temperature range ([0.5-10] x 10(exp 4) K) and compared, where possible, with other available calculations. Subject headings: atomic data - atomic processes

Tayal, S. S.↗
DOE OSTI2024

Tracking ultrafast non-adiabatic dissociation dynamics of the deuterated water dication molecule

Here, we applied reaction microscopy to elucidate fast non-adiabatic dissociation dynamics of deuterated water molecules after direct photo-double ionization at 61 eV with synchrotron radiation. For the very rare D + + O + + D breakup channel, the particle momenta, angular, and energy distributions of electrons and ions, measured in coincidence, reveal distinct electronic dication states and their dissociation pathways via spin–orbit coupling and charge transfer at crossings and seams on the potential energy surfaces. Notably, we could distinguish between direct and fast sequential dissociation scenarios. For the latter case, our measurements reveal the geometry and orientation of the deuterated water molecule with respect to the polarization vector that leads to this rare 3-body molecular breakup channel. Aided by multi-reference configuration-interaction calculations, the dissociation dynamics could be traced on the relevant potential energy surfaces and particularly their crossings and seams. This approach also unraveled the ultrafast time scales governing these processes.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1972

Low-energy electron transport with the method of discrete ordinates

The one-dimensional discrete ordinates code ANISN was adapted to transport low energy (a few MeV) electrons. Calculated results obtained with ANISN were compared with experimental data for transmitted electron energy and angular distribution data for electrons normally incident on aluminum slabs of various thicknesses. The calculated and experimental results are in good agreement for a thin slab (0.2 of the electron range), but not for the thicker slabs (0.6 of the electron range). Calculated results obtained with ANISN were also compared with results obtained using Monte Carlo methods.

Bartine, D. E.↗
DOE OSTI2022

Coarse-Grained Density Functional Theory Predictions via Deep Kernel Learning

Scalable electronic predictions are critical for soft materials design. Recently, the Electronic Coarse-Graining (ECG) method was introduced to renormalize all-atom quantum chemical (QC) predictions to coarse-grained (CG) resolutions using deep neural networks (DNNs). While DNNs can learn complex representations that prove challenging for kernel-based methods, they are susceptible to overfitting and the overconfidence of uncertainty estimations. Here, we develop ECG within a GPU-accelerated Deep Kernel Learning (DKL) framework to enable CG QC predictions using range-separated hybrid density functional theory (DFT), obtaining a 107 speedup relative to naive all-atom QC. By treating the predicted electronic properties as random Gaussian Processes, DKL incorporates CG mapping degeneracy by learning the distribution of electronic energies as a function of CG configuration. DKL-ECG accurately reproduces molecular orbital energies from range-separated DFT while facilitating efficient training via active learning using the uncertainties provided by DKL. Further, we show that while active learning algorithms enable efficient sampling of a more diverse configurational space relative to random sampling, all explored query methods exhibit comparable performance for the examined system. We attribute this result to the significant overlap of the feature space and output property distributions across multiple temperatures.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1975

Energy spreading and angular distribution of a beam of electrons in molecular hydrogen

A Monte Carlo approach is used to obtain the energy spreading and angular distribution of initially monoenergetic and monodirectional beams of electron incident on a gas of molecular hydrogen. Several beams of primary electrons and the resultant secondaries are degraded in a step-by-step procedure which utilizes a detailed set of cross sections, together with reasonable approximations for the creation of secondary electrons. Particular attention is paid to the initial angular distribution of secondary electrons. An analytic function which characterizes current experimental differential cross-section data is used to provide realistic inputs into our calculations. The results for energy distribution as a function of distance and angular distribution at selected energies and distances are illustrated.

Heaps, M. G.↗
NASA NTRS1978

Nonlinear pitch angle scattering of energetic electrons by coherent VLF waves in the magnetosphere

A study is made of nonlinear cyclotron resonance wave-particle interaction in the magnetosphere with attention to the pitch angle scattering of energetic electrons by coherent VLF whistler mode signals. A computer simulation of the full nonlinear equations of motions for energetic particles interacting with a longitudinal whistler mode wave in an inhomogeneous magnetosphere are used. The results are compared to those of a linear theory. Test electrons distributed in energy and pitch angle are used to simulate the full distribution of particles. The scattering of the test particles and their integration over energy and pitch angle yield the precipitated flux. The results suggest that coherent VLF waves significantly influence the dynamics and lifetimes of energetic electrons trapped in the magnetosphere and magnetic shells illuminated by the waves.

Inan, U. S.↗
NASA NTRS1976

Cyclotron side-band emissions from ring-current electrons

The paper examines temporal variations in electron energy spectra and pitch-angle distributions during a VLF-emission event observed by Explorer 45 in the main phase of a magnetic storm. It is noted that the observed event occurred outside the plasmasphere on the night side of the magnetosphere and that the dusk-side plasmapause had a double structure during the event. It is found that the VLF emissions consisted of two frequency bands, corresponding to the whistler and electrostatic modes, and that there was a sharp band of 'missing emissions' along frequencies equal to half the equatorial electron gyrofrequency. A peculiar pitch-angle distribution for high-energy electrons (50 to 350 keV) is noted. It is concluded that the VLF-producing particles were enhanced low-energy (about 5 keV) ring-current electrons which penetrated into the night side of the magnetosphere from the magnetotail plasma sheet and which drifted eastward after encountering the steep gradient of the geomagnetic field.

Maeda, K.↗
NASA NTRS1996

Collision Strengths for Electron Impact Excitation of Inelastic Transitions in Ar II

We have calculated collision strengths for electron impact excitation of inelastic transitions in Ar II using the R-matrix method in two independent nine- and 19-state close-coupling approximations. In the nine-state calculation the 3s(sup 2)3p(sup 5)2p(sup 0), 3S(sup 3)p(sup 6)S-2, 3p(sup 4)(P-3)4s(sup 2)P, 3p(sup 4)(P-3)3d(sup 2)P, 3p(sup 4)(D-1)4s(sup 2)D, 3p(sup 4)(P-3)3d(sup 2)D, 3p(sup 4)(S-1)4s(sup 2)S, 3p(sup 4)(D-1)3d(sup 2)S and 3p(sup 4)(D-1)4d(sup 2)S states are included, while in the 19-state calculation these states plus an additional ten states 3p(sup 4)(P-3)3d(sup 2)F, 3p(sup 4)(P-3)4p(sup 2)D(sup 0), 2p(sup 0), 2S(sup 0), 3p(sup 4)(D-1)4p(sup 2)P(sup 0), 2D(sup O), 2F(sup 0), 3p(sup 4)(D-1)3d(sup 2)D, p-2 and 3p(sup 4)(S-1)4p(sup 2)P(sup 0) are considered. These target states are represented by fairly extensive configuration-interaction wavefunctions which yield excitation energies and oscillator strengths that are generally in good agreement with the available most accurate calculations and the experimental values. Rydberg series of resonances converging to the excited state thresholds are included in the calculation. The effective collision strengths are obtained assuming a Maxwellian distribution of electron energies which are tabulated over the temperature range (0.5-20) x 10(exp 4) K.

Tayal, S. S.↗
DOE OSTI2021

A Remote Development Process and Platform for Power Electronic Systems

Like many areas in research and development, power electronic and distributed energy resource research and development slowed during the COVID pandemic. While the presence of the virus has reduced and workers are returning to shared offices, uncertainty of potential future challenges are still present. This work proposes a development and testing network that provides researchers the ability to operate remotely and coordinate control and debug activities for power electronic systems. This development and testing network has been demonstrated in both controller hardware-in-the-loop (C-HIL) and hardware testing.

Starke, Michael↗
NASA NTRS2000

Research Activities at Plasma Research Laboratory at NASA Ames Research Center

In order to meet NASA's requirements for the rapid development and validation of future generation electronic devices as well as associated materials and processes, enabling technologies are being developed at NASA-Ames Research Center using a multi-discipline approach. The first step is to understand the basic physics of the chemical reactions in the area of plasma reactors and processes. Low pressure glow discharges are indispensable in the fabrication of microelectronic circuits. These plasmas are used to deposit materials and also etch fine features in device fabrication. However, many plasma-based processes suffer from stability and reliability problems leading to a compromise in performance and a potentially increased cost for the semiconductor manufacturing industry. Although a great deal of laboratory-scale research has been performed on many of these processing plasmas, little is known about the gas-phase and surface chemical reactions that are critical in many etch and deposition processes, and how these reactions are influenced by the variation in operating conditions. Such a lack of understanding has hindered the development of process models that can aid in the scaling and improvement of plasma etch and deposition systems. Our present research involves the study of such plasmas. An inductively-coupled plasma (ICP) source in place of the standard upper electrode assembly of the Gaseous Electronics Conference (GEC) radio-frequency (RF) Reference Cell is used to investigate the discharge characteristics. This ICP source generates plasmas with higher electron densities and lower operating pressures than obtainable with the original parallel-plate version of the GEC Cell. This expanded operating regime is more relevant to new generations of industrial plasma systems being used by the microelectronics industry. The research goal is to develop an understanding of the physical phenomena involved in plasma processing and to measure much needed fundamental parameters, such as gas phase and surface reaction rates, species concentration, temperature, ion energy distribution, and electron number density.

Sharma, S. P.↗
NASA NTRS1999

Diagnostic for Plasma Enhanced Chemical Vapor Deposition and Etch Systems

In order to meet NASA's requirements for the rapid development and validation of future generation electronic devices as well as associated materials and processes, enabling technologies ion the processing of semiconductor materials arising from understanding etch chemistries are being developed through a research collaboration between Stanford University and NASA-Ames Research Center, Although a great deal of laboratory-scale research has been performed on many of materials processing plasmas, little is known about the gas-phase and surface chemical reactions that are critical in many etch and deposition processes, and how these reactions are influenced by the variation in operating conditions. In addition, many plasma-based processes suffer from stability and reliability problems leading to a compromise in performance and a potentially increased cost for the semiconductor manufacturing industry. Such a lack of understanding has hindered the development of process models that can aid in the scaling and improvement of plasma etch and deposition systems. The research described involves the study of plasmas used in semiconductor processes. An inductively coupled plasma (ICP) source in place of the standard upper electrode assembly of the Gaseous Electronics Conference (GEC) radio-frequency (RF) Reference Cell is used to investigate the discharge characteristics and chemistries. This ICP source generates plasmas with higher electron densities (approximately 10(exp 12)/cu cm) and lower operating pressures (approximately 7 mTorr) than obtainable with the original parallel-plate version of the GEC Cell. This expanded operating regime is more relevant to new generations of industrial plasma systems being used by the microelectronics industry. The motivation for this study is to develop an understanding of the physical phenomena involved in plasma processing and to measure much needed fundamental parameters, such as gas-phase and surface reaction rates. species concentration, temperature, ion energy distribution, and electron number density. A wide variety of diagnostic techniques are under development through this consortium grant to measure these parameters. including molecular beam mass spectrometry (MBMS). Fourier transform infrared (FTIR) spectroscopy, broadband ultraviolet (UV) absorption spectroscopy, a compensated Langmuir probe. Additional diagnostics. Such as microwave interferometry and microwave absorption for measurements of plasma density and radical concentrations are also planned.

Cappelli, Mark A.↗
NASA NTRS1974

Photoelectron spectra of the decomposition of ethylene on /110/ tungsten

The experimental apparatus used in the investigation consisted of an ultrahigh-vacuum chamber, a triple-grid, a microwave-excited resonance lamp, and an electron energy analyzer. The chemical nature of the chemisorbed species was studied, taking into account the energy distribution of photoemitted electrons, work function determinations, and low-energy electron diffraction patterns.

Plummer, E. W.↗
NASA NTRS2018

Precipitating Electron Energy Flux and Characteristic Energies in Jupiter's Main Auroral Region as Measured by Juno/JEDI

The relationship between electron energy flux and the characteristic energy of electron distributions in the main auroral loss cone bridges the gap between predictions made by theory and measurements just recently available from Juno. For decades such relationships have been inferred from remote sensing observations of the Jovian aurora, primarily from the Hubble Space Telescope, and also more recently from Hisaki. However, to infer these quantities, remote sensing techniques had to assume properties of the Jovian atmospheric structure - leading to uncertainties in their profile. Juno's arrival and subsequent auroral passes have allowed us to obtain these relationships unambiguously for the first time, when the spacecraft passes through the auroral acceleration region. Using Juno /Jupiter Energetic particle Detector Instrument (JEDI), an energetic particle instrument, we present these relationships for the 30-kiloelectronvolts to 1-megaelectronvolts electron population. Observations presented here show that the electron energy flux in the loss cone is a nonlinear function of the characteristic or mean electron energy and supports both the predictions from Knight (1973, https://doi.org/10.1016/0032-0633(73)90093-7) and magnetohydrodynamic turbulence acceleration theories (e.g., Saur et al., 2003, https://doi.org/10.1029/2002GL015761). Finally, we compare the in situ analyses of Juno with remote Hisaki observations and use them to help constrain Jupiter's atmospheric profile. We find a possible solution that provides the best agreement between these data sets is an atmospheric profile that more efficiently transports the hydrocarbons to higher altitudes. If this is correct, it supports the previously published idea (e.g., Parkinson et al., 2006, https://doi.org/10.1029/2005JE002539) that precipitating electrons increase the hydrocarbon eddy diffusion coefficients in the auroral regions.

Auroral↗
NASA NTRS1984

Microwave signature of thick-target electron beams in solar flares

The steady-state behavior of a flux of nonthermal electrons injected into a fully ionized thick target is examined. Owing to the (inverse square) energy dependence of the Coulomb collisional cross section, it is found that injected electron distributions that are monotonically decreasing functions of electron energy develop at finite depths into distributions that have 'humps' in velocity space; the electron energy corresponding to the hump correlates with the overlying particle column density to the target. This results in a two-stream unstable situation. The distribution is constantly being relaxed by quasi-linear relaxation and re-created by collisions; in this way a steady nonthermal level of Langmuir plasma waves is created, and these waves in turn produce microwave plasma radiation with a typical flux of 3 x 10 to the -16th erg/sq cm-sec. This flux can be enhanced by a factor of up to 100 by a high level of low-frequency (such as ion-acoustic) turbulence, which prevents quasi-linear relaxation for a sufficient fraction of the path length.

Emslie, A. G.↗