SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In 1979 significant concentrations of singly and multiply charged sulfur ions were observed in the Io torus. Attempts to model these observations revealed a need for new fundamental cross section data. In response, laboratory measurements of the cross-sections for single, double, triple and quadruple ionization of sulfur atoms by electron impact are presented for collision energies from threshold to 500 eV.
The diffuse aurora has recently been shown to be a major contributor of energy flux into the Earth's ionosphere. Therefore, a comprehensive theoretical analysis is required to understand its role in energy redistribution in the coupled ionosphere-magnetosphere system. In previous theoretical descriptions of precipitated magnetospheric electrons (E is approximately 1 keV), the major focus has been the ionization and excitation rates of the neutral atmosphere and the energy deposition rate to thermal ionospheric electrons. However, these precipitating electrons will also produce secondary electrons via impact ionization of the neutral atmosphere. This paper presents the solution of the Boltzman-Landau kinetic equation that uniformly describes the entire electron distribution function in the diffuse aurora, including the affiliated production of secondary electrons (E greater than 600 eV) and their ionosphere-magnetosphere coupling processes. In this article, we discuss for the first time how diffuse electron precipitation into the atmosphere and the associated secondary electron production participate in ionosphere-magnetosphere energy redistribution.
Analysis of thermally labile compounds such as bis(2,2-dinitropropyl) acetal/formal (BDNPA/F), an energetic plasticizer, is usually performed via liquid chromatography (LC) as opposed to gas chromatography (GC) due to thermal decomposition in the inlet or the analytical column. While LC is a powerful technique, the analysis of volatile and semivolatile compounds is best suited to GC. Herein, a method was developed for a gas chromatograph coupled to high-resolution mass spectrometer (GC-HRMS), utilizing a programmable temperature vaporizer (PTV) inlet. A subset of the native compounds and several produced by the thermal decomposition of BDNPA/F in the inlet were evaluated by using multiple PTV inlet parameters to determine the optimal ramp rate and final temperature of the inlet (60 °C/min from 60 to 325 °C). The optimized GC-HRMS method nearly reduced all thermal decomposition, allowing for an excellent separation to be obtained. Furthermore, multiple ionization methods, including electron impact (EI), negative chemical ionization (NCI), and positive chemical ionization (PCI), were used to explore the many chemical differences between the BDNPA/F samples. A preliminary investigation of the benefits of using GC-HRMS to evaluate the chemical differences between unaged and aged BDNPA/F samples for unique insight was evaluated.
The operation of a new AlSb/InAs heterojunction bipolar transistor is studied. The electrons are injected into a p-InAs base across the AlSb/InAs heterojunction. The conduction-band discontinuity at this heterojunction is sufficiently large so that energy of the electrons injected into InAs exceeds the threshold for generating electron-hole pairs by impact ionization. The observed incremental common base current at zero collector-base bias decreases and becomes negative as the emitter current is increased, thus providing direct evidence for impact ionization entirely by band-edge discontinuities.
The diffusion of ions in a satellite plasma torus is presently modeled in terms of a one-dimensional random walk in which the particle source is at 0, the particle sink is at an N value that is an integer greater than 2, and the scale size of the diffusion cell is unity. The probability distribution function of the number of steps to exit for an ion is obtained and used in a model which incorporates ionization by electron impact to derive steady state expressions for the ratio of doubly to singly ionized ions, as well as the total number of ions in the torus. The results thus obtained are applied to the torus of the Jovian satellite Io, in order to predict mean residence times for sulfur and oxygen ions.
The critical ionization velocity (CIV) mechanism in a finite size cloud is studied with a series of electrostatic particle-in-cell simulations. It is observed that an initial seed ionization, produced by non-CIV mechanisms, generates a cross-field ion beam which excites a modified beam-plasma instability (MBPI) with frequency in the range of the lower hybrid frequency. The excited waves accelerate electrons along the magnetic field up to the ion drift energy that exceeds the ionization energy of the neutral atoms. The heated electrons in turn enhance the ion beam by electron-neutral impact ionization, which establishes a positive feedback loop in maintaining the CIV process. It is also found that the efficiency of the CIV mechanism depends on the finite size of the gas cloud in the following ways: (1) Along the ambient magnetic field the finite size of the cloud, L (sub parallel), restricts the growth of the fastest growing mode, with a wavelength lambda (sub m parallel), of the MBPI. The parallel electron heating at wave saturation scales approximately as (L (sub parallel)/lambda (sub m parallel)) (exp 1/2); (2) Momentum coupling between the cloud and the ambient plasma via the Alfven waves occurs as a result of the finite size of the cloud in the direction perpendicular to both the ambient magnetic field and the neutral drift. This reduces exponentially with time the relative drift between the ambient plasma and the neutrals. The timescale is inversely proportional to the Alfven velocity. (3) The transvers e charge separation field across the cloud was found to result in the modulation of the beam velocity which reduces the parallel heating of electrons and increases the transverse acceleration of electrons. (4) Some energetic electrons are lost from the cloud along the magnetic field at a rate characterized by the acoustic velocity, instead of the electron thermal velocity. The loss of energetic electrons from the cloud seems to be larger in the direction of plasma drift relative to the neutrals, where the loss rate is characterized by the neutral drift velocity. It is also shown that a factor of 4 increase in the ambient plasma density, increases the CIV ionization yield by almost 2 orders of magnitude at the end of a typical run. It is concluded that a larger ambient plasma density can result in a larger CIV yield because of (1) larger seed ion production by non-CIV mechanisms, (2) smaller Alfven velocity and hence weak momentum coupling, and (3) smaller ratio of the ion beam density to the ambient ion density, and therefore a weaker modulation of the beam velocity. The simulation results are used to interpret various chemical release experiments in space.
An experimental study was undertaken to examine the feasibility of using ion-implanted filaments doped with either an alkali metal or noble gas for in situ recalibration of onboard mass spectrometers during extended space missions. Implants of rubidium and krypton in rhenium ribbon filaments were subsequently tested in a bakeable 60 deg sector mass spectrometer operating in the static mode. Surface ionization and electron impact ion sources were both used, each yielding satisfactory results. The metallic implant with subsequent ionization provided a means of mass scale calibration and determination of system operating parameters, whereas the noble gas thermally desorbed into the system was more suited for partial pressure and sensitivity determinations.
This first analysis of Pioneer Venus Orbiter (PVO) plasma analyzer electron measurements obtained in early 1992 during teh PVO entry phase of the mission indicates the presence downstream from the terminator of a depletion or 'bite out' of energetic ionosheath electrons similar to that observed on Mariner 10. There is more than one possible explanation for this energetic electron depletion. If it is due to atmospheric scattering, the electrons traveling along draped magnetic flux tubes that thread through the Venus neutral atmosphere would lose energy from impact ionization with oxygen. The cross-section for such electron impact ionization of oxygen has a peak near 100 eV, and it remains high above this energy, so atmospheric loss could provde a natural process for electrons at these energies to be selectively removed. In this case, our results are consistent with the Kar et al. (1994) study of PVO atmospheric entry ion mass spectrometer data, which indicates that electron impact plays a significant role in maintaining the nightside ionosphere. Although it is appealing to interpret the energetic electron depletion in terms of direct atmospheric scattering, alternatively it could result from strong draping which connects the depletion region magnetically to the weak downstream bow shock and thereby reduces the electron source strength.
This first analysis of Pioneer Venus Orbiter (PVO) plasma analyzer electron measurements obtained in early 1992 during the PVO entry phase of the mission indicates the presence downstream from the terminator of a depletion or "bite out" of energetic ionosheath electrons similar to that observed on Mariner 10. There is more than one possible explanation for this energetic electron depletion. If it is due to atmospheric scattering, the electrons traveling along draped magnetic flux tubes that thread through the Venus neutral atmosphere would lose energy from impact ionization with oxygen. The cross-section for such electron impact ionization of oxygen has a peak near 100 eV, and it remains high above this energy, so atmospheric loss could provide a natural process for electrons at these energies to be selectively removed. In this case, our results are consistent with the Kar et al. (1994) study of PVO atmospheric entry ion mass spectrometer data which indicates that electron impact plays a significant role in maintaining the nightside ionosphere. Although it is appealing to interpret the energetic electron depletion in terms of direct atmospheric scattering, alternatively it could result from strong draping which connects the depletion region magnetically to the weak downstream bow shock and thereby reduces the electron source strength.
Positive ion desorption following electron impact dissociative ionization of ethane adsorbed on Ar, Kr, and Xe multilayers has been studied as a function of incident electron energy from threshold to 100 eV. Based on the dependence of ion yields on the identity of the rare gas, it is likely that the majority of ethane molecules undergo indirect ionization following hole transfer from the ionized underlying rare gas. Further, this has also been corroborated by density of states calculations showing the energetic alignment of the outer valence states of ethane and the condensed rare gas ionization energies. Due to the near-resonant nature of charge transfer for single-hole states, the ethane molecular ion is excited to different final ionic states on different rare gases, which leads to differences in ion desorption yields and branching ratios. The quantitative yields increase with increasing ionization energy gap between the rare gas and ethane, in the order Ar > Kr >Xe. The large increase in yields from 25 eV onwards for all rare gases is likely due to the formation and decay of two-hole states on neighboring rare gas and ethane molecules due to interatomic and intermolecular Coulomb decay (ICD) and not electron transfer mediated decay (ETMD). The ICD and ETMD pathways become accessible when the incoming electron has sufficient energy to excite the inner valence ns level of the rare gas to a Rydberg state or ionize it. The experimental findings are supported by calculations of thresholds, density of states for the final configurations of these processes, and coupling strengths for hole transfer between ethane and rare gases. The fragment ion branching ratios vary with energy from threshold to about 35 eV, showing the fragmentation pattern changes with the mode of hole transfer and availability of excess energy. Sigma C–C bonds are more likely to break than C–H bonds in the mid-20 eV range, and this effect is most pronounced for Xe, followed by Kr, and then Ar.
Herein, a 1D radial diffusion model is developed to study the observed rapid expulsion of argon from the runaway electron plateau in the DIII-D tokamak following secondary massive low-Z (D 2 or He) gas injection. The expulsion of argon is found to be caused by further cooling of the background plasma due to the added neutrals, accompanied by recombination of argon ions and greatly increased outward radial transport rate of argon (now dominantly in neutral form) out of the runaway electron beam. After argon expulsion, power loss out of the runaway electron plateau is found to be dominated by neutral transport to the wall (rather than by radiation); this result resolves the power balance discrepancy highlighted in previous work on argon expulsion out of the runaway electron plateau.
Molecular deuterium line emission is observed in both the visible and ultraviolet (UV) wavelength ranges after massive (> 100 Torr-L) injection of D 2 gas into post-disruption runaway electron (RE) dominated plasmas in the DIII-D tokamak. D 2 UV line emission is found to be the dominant source of radiated power, surpassing D Lyα. Interpretive modeling with a collisional-radiative model (CRM) indicates that D 2 radiation surpasses D radiation because Lyα is strongly trapped, while D 2 UV lines are mostly untrapped. The CRM also indicates that the D 2 line emission is completely dominated by RE impact (rather than thermal electron impact), so the D 2 line emission can serve as a good diagnostic for the spatial localization of REs. Analysis of D 2 visible lines indicates that the D 2 molecules in the plasma are thermally equilibrated with the background plasma, with vibrational, rotational, and kinetic temperatures all near 0.3 eV. D 2 spectroscopy therefore serves as a convenient diagnostic of background plasma temperature. As a result, measurement of D 2 radiated power also appears to serve as a useful diagnostic for constraining neutral transport modeling.
The Coulomb-dipole (CD) theory of the electron-atom impact-ionization threshold law is extended to include the full electronic repulsion. It is found that the threshold law is altered to a form in contrast to the previous angular-independent model. A second energy regime, is also identified wherein the 'threshold' law reverts to its angle-independent form. In the final part of the paper the dipole parameter is estimated to be about 28. This yields numerical estimates of E(a) = about 0.0003 and E(b) = about 0.25 eV.
We report the propagation of atmospheric pressure plasmas (APPs) on and through porous dielectric materials is being investigated for plasma-catalysis and functionalizing biomedical materials for tissue scaffolding and bone regeneration. Such plasma functionalization improves wettability and cell attachment, and so uniformity of the treatment of the pore surfaces is important. The method of propagation of APPs through porous media is not well characterized. In this paper, we discuss results from a computational investigation of humid air APPs propagating through short fully interconnected pore-chains in a dielectric substrate. The properties of the dielectric and pores (diameter 150 μm) were chosen to resemble bone scaffolding. We found that photoionization is an important feature in plasma propagation through pore-chains to seed electrons in the following pore in the chain. This seeding of electrons in regions of high electric field allows for the formation of micro-streamers and surface ionization waves. This is particularly important when the openings between pores are small. The orientation of the pore-chain with respect to the applied electric field has a significant impact on plasma generation, mode of propagation, and fluences of short-lived, reactive species to the surfaces of the pores. The uniformity of fluences of charged and short-lived neutral species to the pore surfaces decreases as the angle of the pore chain deviates from being aligned with the applied electric field. Diffusion within pores
It is assumed that nonthermal escape from Triton's atmosphere produces a co-orbiting torus of unionized gas (presumably nitrogen and hydrogen) that subsequently becomes ionized by electron impact to populate a partial Triton plasma torus analogous to the Io plasma torus in Jupiter's magnetosphere. Centrifugal and magnetic-mirror forces confine the ions to a plasma sheet located between the magnetic and centrifugal equators. The ionization rate, and hence the torus ion concentration, is strongly peaked at the two points (approximately 180 deg apart in longitude) at which Triton's orbit intersects the plasma equator. During the course of Neptune's rotation these intersection points trace out two arcs roughly 75 deg in longitudinal extent, which we take to be the configuration of the resulting (partial) plasma torus. The implied partial ring currents produce a quadrupolar (four-cell) convection system that provides rapid outward transport of plasma from the arcs. Ring-current shielding, however, prevents this convection system from penetrating very far inside the plasma-arc distance. It is suggested that this convection/shielding process accounts for the radial confinement of trapped particles (150 keV or greater) within L = 14.3 as observed by the Voyager LECP instrument.
Characterizing ionization wave propagation in low temperature plasma jets is critical to predicting production of reactive species and plasma–surface interactions for biomedical applications and surface functionalization. In this work, results from optical emission and laser induced fluorescence measurements of the ionization wave in a He plasma jet operating in a controlled gas environment are discussed and used for comparison with numerical modeling. Additionally, the ionization wave was observed using ICCD (Intensified Charge Coupled Device) imaging and characterized by time and spatially resolved electron density measurements using laser-collision-induced fluorescence. The plasma jet was initially characterized using pure He (nominally at 200 Torr), while varying pressure and voltage. When operating in pure He, the ionization wave broadly expands exiting the plasma tube. Increasing the operating pressure reduces the speed and isotropic expansion of the ionization wave. Furthermore, the jet operated with a humid He shroud was also studied. The humid He shroud results in the electron density increasing and having an annular profile due to the lower ionization potential of H2O compared to He and localized photoionization in the mixing region. Numerical modeling highlighted the importance of resonance radiation emitted by excited states of He, photoelectron emission from the quartz tube, and the kinetic behavior of the electrons produced by photoionization ahead of the ionization front.
Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [Samulyak et al., Nucl. Fusion, 61(4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single-fragment ablation quantifies the influence of various factors, in particular, the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of the ablation clouds and their large-scale dynamics in ITER. In conclusion, the penetration depth of the ablation clouds is found to be of the order of 50 cm.
The Particle-in-Cell (PIC) method, a cornerstone in plasma modeling, is widely employed for its ability to simulate kinetic phenomena in device-scale domains. Part of what makes this possible is that computational macroparticles represent many physical particles. It converges under certain constraints, including a grid spacing that resolves the Debye length and a time step small enough to respect the Courant–Friedrichs–Lewy condition and plasma frequency stability limit. Here, we introduce a new constraint necessary to avoid Artificial Correlation Heating (ACH). This requires that the macroparticle coupling strength be smaller than one, Γ ω < 1, where Γ ω ≡ Γω 2/3 , Γ = Z 2 e 2 /(4πε 0 ak B T) is the physical coupling strength, and w is the macroparticle weight. This is particularly relevant to 3D simulations of dense plasmas, which are becoming common with modern computing power. If this condition is violated, the finite macroparticle weight artificially enhances the coupling strength and causes the plasma to heat until the macroparticle coupling strength is near unity, depending on the grid resolution. A comprehensive model of ACH is developed that incorporates electron density, temperature, macroparticle weight, and grid resolution. It is then tested using PIC simulations, delineating the boundaries of the method's applicability and offering a predictive framework for ACH. Moreover, the research explores a runaway heating process induced by ACH in the presence of ionization, which can lead to numerical instability. A conclusion of this study is that the onset of ACH can impose a more stringent constraint on the macroparticle weight and average number of macroparticles per cell than what is typically expected, particularly in 3D simulations of dense plasmas.