Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Ultralow nonalloyed Ohmic contact resistance to self aligned N-polar GaN high electron mobility transistors by In(Ga)N regrowth

Ultralow Ohmic contact resistance and a self-aligned device structure are necessary to reduce the effect of parasitic elements and obtain higher f{sub t} and f{sub max} in high electron mobility transistors (HEMTs). N-polar (0001) GaN HEMTs, offer a natural advantage over Ga-polar HEMTs, in terms of contact resistance since the contact is not made through a high band gap material [Al(Ga)N]. In this work, we extend the advantage by making use of polarization induced three-dimensional electron-gas through regrowth of graded InGaN and thin InN cap in the contact regions by plasma (molecular beam epitaxy), to obtain an ultralow Ohmic contact resistance of 27 OMEGA mum to a GaN 2DEG.

36 MATERIALS SCIENCE↗

Using in-process measurements of open-gate structures to evaluate threshold voltage of normally-off GaN-based high electron mobility transistors

The parameters of open-gate structures treated with different etching time were monitored during the gate recess process, and their impacts on the threshold voltage (V{sub th}) of final fabricated AlGaN/GaN high electron mobility transistors (HEMTs) based on open-gate structures were discussed in this paper. It is found that V{sub th} can exceed 0 V when channel resistance in the recessed region (R{sub on-open}) increases over ∼275 Ω mm, maximum current (I{sub Dmax}) decreases below ∼29 mA/mm, or recessed barrier thickness (t{sub RB}) is below ∼7.5 nm. In addition, t{sub RB} obtained by atomic force microscopy measurements and C-V measurements are also compared. Finally, theoretical common criteria based on the experimental results of this work for t{sub RB} and R{sub on-open} were established to evaluate the V{sub th} of a regular normally-off AlGaN/GaN HEMTs. The results indicate that these parameters of open-gate structure can be utilized to achieve normally-off HEMTs with controllable V{sub th}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improvement of Drain Breakdown Voltage with A Back-Side Gate on AlGaN/GaN High Electron Mobility Transistors

The effect of a back gate on the dc performance of AlGaN/GaN high electron mobility transistor was investigated. The back gate was fabricated directly under the device active area by etching off the Si substrate, AlN nucleation layer, and graded AlGaN transition layer and depositing Ni/Au-based gate metal on the exposed GaN buffer layer. The reverse bias gate leakage current decreased from 3.9 × 10 -5 to 1.2 × 10 -5 mA/mm by applying -10 V at the back gate. Because of the suppression of gate leakage current by the back gate, the drain on/off ratio improved from 1.8 × 10 5 to 1.2 × 10 6 and the subthreshold swing from 204 to 137 mV/dec. The drain breakdown voltage could be improved by 40% when the back gate was biased at -25 V.

42 ENGINEERING↗

The effects of proton irradiation on the reliability of InAlN/GaN high electron mobility transistors

We have investigated the effect of proton irradiation on reliability of InAlN/GaN high electron mobility transistors (HEMTs). Devices were subjected to 5-15 MeV proton irradiations with a fixed dose of 5 1015 cm-2, or to a different doses of 2 1011, 5 1013 or 2 1015 cm-2 of protons at a fixed energy of 5 MeV. During off-state electrical stressing, the typical critical voltage for un-irradiated devices was 45 to 55 V. By sharp contrast, no critical voltage was detected for proton irradiated HEMTs up to 100 V, which was instrument-limited. After electrical stressing, no degradation was observed for the drain or gate current-voltage characteristics of the proton-irradiated HEMTs. However, the drain current decreased ~12%, and the reverse bias gate leakage current increased more than two orders of magnitude for un-irradiated HEMTs as a result of electrical stressing.

Liu, L.↗

O{sub 3}-sourced atomic layer deposition of high quality Al{sub 2}O{sub 3} gate dielectric for normally-off GaN metal-insulator-semiconductor high-electron-mobility transistors

High quality Al{sub 2}O{sub 3} film grown by atomic layer deposition (ALD), with ozone (O{sub 3}) as oxygen source, is demonstrated for fabrication of normally-off AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs). Significant suppression of Al–O–H and Al–Al bonds in ALD-Al{sub 2}O{sub 3} has been realized by substituting conventional H{sub 2}O source with O{sub 3}. A high dielectric breakdown E-field of 8.5 MV/cm and good TDDB behavior are achieved in a gate dielectric stack consisting of 13-nm O{sub 3}-Al{sub 2}O{sub 3} and 2-nm H{sub 2}O-Al{sub 2}O{sub 3} interfacial layer on recessed GaN. By using this 15-nm gate dielectric and a high-temperature gate-recess technique, the density of positive bulk/interface charges in normally-off AlGaN/GaN MIS-HEMTs is remarkably suppressed to as low as 0.9 × 10{sup 12 }cm{sup −2}, contributing to the realization of normally-off operation with a high threshold voltage of +1.6 V and a low specific ON-resistance R{sub ON,sp} of 0.49 mΩ cm{sup 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defect-engineered GaN high electron mobility transistors for enhanced radiation tolerance

This study explores the radiation resilience of GaN high-electron-mobility transistors (HEMTs) under various preconditioning treatments—pristine, electro-pulsed, electrically overstressed, and 60 Co gamma-irradiated—with a focus on enhancing survivability in high-radiation environments. Key findings emphasize the gate region’s central role in radiation sensitivity, with increased defect concentrations leading to reduced sensitivity—as determined from reduced single-event transient intensities during pulsed-laser studies—and impacting charge-transport dynamics. Notably, the most sensitive region shifted as a function of bias state, with the drain side of the gate being most sensitive under negative gate bias and the source side under unbiased conditions due to two-dimensional electron gas disruptions. These insights clarify the mechanisms influencing radiation sensitivity in microelectronics and highlight the potential of defect and strain engineering to enhance the radiation hardness of GaN HEMTs across various operational states, providing valuable guidance for applications in space, defense, and other radiation-rich environments.

36 MATERIALS SCIENCE↗

Impact of barrier thickness on transistor performance in AlN/GaN high electron mobility transistors grown on free-standing GaN substrates

A series of six ultrathin AlN/GaN heterostructures with varied AlN thicknesses from 1.5–6 nm have been grown by molecular beam epitaxy on free-standing hydride vapor phase epitaxy GaN substrates. High electron mobility transistors (HEMTs) were fabricated from the set in order to assess the impact of barrier thickness and homo-epitaxial growth on transistor performance. Room temperature Hall characteristics revealed mobility of 1700 cm{sup 2}/V s and sheet resistance of 130 Ω/□ for a 3 nm thick barrier, ranking amongst the lowest room-temperature sheet resistance values reported for a polarization-doped single heterostructure in the III-Nitride family. DC and small signal HEMT electrical characteristics from submicron gate length HEMTs further elucidated the effect of the AlN barrier thickness on device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement-mode Al 0.85 Ga 0.15 N/Al 0.7 Ga 0.3 N high electron mobility transistor with fluorine treatment

Enhancement-mode Al 0.7 Ga 0.3 N-channel high electron mobility transistors (HEMTs) were achieved here through a combination of recessed etching and fluorine ion deposition to shift the threshold voltage (V TH ) relative to depletion-mode devices by +5.6 V to V TH = +0.5 V. Accounting for the threshold voltage shift (ΔV TH ), current densities of approximately 30 to 35 mA/mm and transconductance values of 13 mS/mm were achieved for both the control and enhancement mode devices at gate biases of 1 V and 6.6 V, respectively. Little hysteresis was observed for all devices, with voltage offsets of 20 mV at drain currents of 1.0 × 10 -3 mA/mm. Enhancement-mode devices exhibited slightly higher turn-on voltages (+0.38 V) for forward bias gate currents. Piecewise evaluation of a threshold voltage model indicated a ΔV TH of +3.3 V due to a gate recess etching of 12 nm and an additional +2.3 V shift due to fluorine ions near the AlGaN surface.

36 MATERIALS SCIENCE↗

Extreme Temperature Operation of Ultra-Wide Bandgap AlGaN High Electron Mobility Transistors

High Aluminum content channel (Al 0.85 Ga 0.15 N/Al -0.7 Ga 0.3 N) High Electron Mobility Transistors (HEMTs) were operated from room temperature to 500°C in ambient. The devices exhibited only moderate reduction, 58%, in on-state forward current. Gate lag measurements at 100 kHz and 10% duty only showed a slight reduction in pulsed current from DC at 500°C and high gate voltages. Interfacial trap densities were 2 × 10 11 over the range 25-300°C and 3 × 10 12 cm -2 from 300-500°C from the subthreshold swing. These low interfacial trap densities and the near ideal gate lag measurement indicate high-quality epi layers. The insulating properties of the barrier layer led to low gate induced drain leakage current of ~10 -12 A/mm and ~10 -8 A/mm at 25 and 500°C, respectively. Low leakage current was enabled by the high Schottky barrier of the Ni/Au gate, 1.1 eV and 3.3 eV at 25 and 500°C, respectively. These properties of the AlGaN channel HEMTs demonstrate their potential for high power and high temperature operation.

36 MATERIALS SCIENCE↗

Study of the effects of GaN buffer layer quality on the dc characteristics of AlGaN/GaN high electron mobility transistors

Here we studied the effect of buffer layer quality on dc characteristics of AlGaN/GaN high electron mobility (HEMTs). AlGaN/GaN HEMT structures with 2 and 5 μm GaN buffer layers on sapphire substrates from two different vendors with the same Al concentration of AlGaN were used. The defect densities of HEMT structures with 2 and 5 μm GaN buffer layer were 7 × 10 9 and 5 × 10 8 cm ₋2 , respectively, as measured by transmission electron microscopy. There was little difference in drain saturation current or in transfer characteristics in HEMTs on these two types of buffer. However, there was no dispersion observed on the nonpassivated HEMTs with 5 μm GaN buffer layer for gate-lag pulsed measurement at 100 kHz, which was in sharp contrast to the 71% drain current reduction for the HEMT with 2 μm GaN buffer layer.

36 MATERIALS SCIENCE↗

High electron mobility thin-film transistors based on Ga{sub 2}O{sub 3} grown by atmospheric ultrasonic spray pyrolysis at low temperatures

We report on thin-film transistors based on Ga{sub 2}O{sub 3} films grown by ultrasonic spray pyrolysis in ambient atmosphere at 400–450 °C. The elemental, electronic, optical, morphological, structural, and electrical properties of the films and devices were investigated using a range of complementary characterisation techniques, whilst the effects of post deposition annealing at higher temperature (700 °C) were also investigated. Both as-grown and post-deposition annealed Ga{sub 2}O{sub 3} films are found to be slightly oxygen deficient, exceptionally smooth and exhibit a wide energy bandgap of ∼4.9 eV. Transistors based on as-deposited Ga{sub 2}O{sub 3} films show n-type conductivity with the maximum electron mobility of ∼2 cm{sup 2}/V s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fixed interface charges between AlGaN barrier and gate stack composed of in situ grown SiN and Al{sub 2}O{sub 3} in AlGaN/GaN high electron mobility transistors with normally off capability

Using a generalized extraction method, the fixed charge density N{sub int} at the interface between in situ deposited SiN and 5 nm thick AlGaN barrier is evaluated by measurements of threshold voltage V{sub th} of an AlGaN/GaN metal insulator semiconductor high electron mobility transistor as a function of SiN thickness. The thickness of the originally deposited 50 nm thick SiN layer is reduced by dry etching. The extracted N{sub int} is in the order of the AlGaN polarization charge density. The total removal of the in situ SiN cap leads to a complete depletion of the channel region resulting in V{sub th} = +1 V. Fabrication of a gate stack with Al{sub 2}O{sub 3} as a second cap layer, deposited on top of the in situ SiN, is not introducing additional fixed charges at the SiN/Al{sub 2}O{sub 3} interface.

36 MATERIALS SCIENCE↗

Extraction of net interfacial polarization charge from Al{sub 0.54}In{sub 0.12}Ga{sub 0.34}N/GaN high electron mobility transistors grown by metalorganic chemical vapor deposition

Al{sub x}In{sub y}Ga{sub (1-x-y)}N materials show promise for use in GaN-based heterojunction devices. The growth of these materials has developed to the point where they are beginning to see implementation in high electron mobility transistors (HEMTs) and light emitting diodes. However, the electrical properties of these materials are still poorly understood, especially as related to the net polarization charge at the AlInGaN/GaN interface (Q{sub π}(net)). All theoretical calculations of Q{sub π}(net) share the same weakness: dependence upon polarization bowing parameters, which describe the deviation in Q{sub π}(net) from Vegard's law. In this study, direct analysis of Q{sub π}(net) for Al{sub 0.54}In{sub 0.12}Ga{sub 0.34}N/GaN HEMTs is reported as extracted from C-V, I-V, and Hall measurements performed on samples grown by metalorganic chemical vapor deposition. An average value for Q{sub π}(net) is calculated to be 2.015 × 10{sup −6} C/cm{sup 2}, with just 6.5% variation between measurement techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cryogenic, low-noise high electron mobility transistor amplifiers for the Deep Space Network

The rapid advances recently achieved by cryogenically cooled high electron mobility transistor (HEMT) low-noise amplifiers (LNA's) in the 1- to 10-GHz range are making them extremely competitive with maser amplifiers. In order to address future spacecraft navigation, telemetry, radar, and radio science needs, the Deep Space Network is investing both maser and HEMT amplifiers for its Ka-band (32-GHz) downlink capability. This article describes the current state cryogenic HEMT LNA development at Ka-band for the DSN. Noise performance results at S-band (2.3 GHz) and X-band (8.5 GHz) for HEMT's and masers are included for completeness.

Bautista, J. J.↗

Plasmonic terahertz detectors based on a high-electron mobility GaAs/AlGaAs heterostructure

In order to characterize magnetic field (B) tunable THz plasmonic detectors, spectroscopy experiments were carried out at liquid helium temperatures and high magnetic fields on devices fabricated on a high electron mobility GaAs/AlGaAs heterostructure. The samples were either gated (the gate of a meander shape) or ungated. Spectra of a photovoltage generated by THz radiation were obtained as a function of B at a fixed THz excitation from a THz laser or as a function of THz photon frequency at a fixed B with a Fourier spectrometer. In the first type of measurements, the wave vector of magnetoplasmons excited was defined by geometrical features of samples. It was also found that the magnetoplasmon spectrum depended on the gate geometry which gives an additional parameter to control plasma excitations in THz detectors. Fourier spectra showed a strong dependence of the magnetoplasmon resonance amplitude on the conduction-band electron filling factor which was explained within a model of the electron gas heating with THz radiation. The study allows to define both the advantages and limitations of plasmonic devices based on high-mobility GaAs/AlGaAs heterostructures for THz detection at low temperatures and high magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the electrical behavior of AlGaN/GaN high electron mobility transistors grown with underlying GaN:Mg layer

In the current study, the electrical behavior of the AlGaN/GaN high electron mobility transistors (HEMTs) grown with an underlying GaN:Mg layer is detailed. It is shown that the activation of the buried p-GaN layer is achieved without hydrogen diffusion out of the layer. Reversal in the electrical behavior of the two-dimensional electron gas (2DEG) is also observed in the as-grown structure based on the p-GaN activation sequence. This behavior is attributed to the complex role played by hydrogen in the overgrown HEMT layers. The results of this study provide new insights into the development of metal organic chemical vapor deposition grown HEMTs with activated buried p-GaN films.

Mahaboob, Isra (ORCID:0000000171558130)↗

Saturation Velocity Measurement of Al 0.7 Ga 0.3 N-Channel High Electron Mobility Transistors

Gate length dependent (80 nm–5000 mm) radio frequency measurements to extract saturation velocity are reported for Al 0.85 Ga 0.15 N/Al 0.7 Ga 0.3 N high electron mobility transistors fabricated into radio frequency devices using electron beam lithography. Direct current characterization revealed the threshold voltage shifting positively with increasing gate length, with devices changing from depletion mode to enhancement mode when the gate length was greater than or equal to 450 nm. Transconductance varied from 10 mS/mm to 25 mS/mm, with the 450 nm device having the highest values. Maximum drain current density was 268 mA/mm at 10 V gate bias. Scattering-parameter characterization revealed a maximum unity gain bandwidth ($f_T$) of 28 GHz, achieved by the 80 nm gate length device. A saturation velocity value of 3.8 × 10 6 cm/s, or 35% of the maximum saturation velocity reported for GaN, was extracted from the $f_T$ measurements

36 MATERIALS SCIENCE↗

Correlation of interface states/border traps and threshold voltage shift on AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors

In this paper, three electrical techniques (frequency dependent conductance analysis, AC transconductance (AC-g{sub m}), and positive gate bias stress) were used to evaluate three different gate dielectrics (Plasma-Enhanced Atomic Layer Deposition Si{sub 3}N{sub 4}, Rapid Thermal Chemical Vapor Deposition Si{sub 3}N{sub 4}, and Atomic Layer Deposition (ALD) Al{sub 2}O{sub 3}) for AlGaN/GaN Metal-Insulator-Semiconductor High-Electron-Mobility Transistors. From these measurements, the interface state density (D{sub it}), the amount of border traps, and the threshold voltage (V{sub TH}) shift during a positive gate bias stress can be obtained. The results show that the V{sub TH} shift during a positive gate bias stress is highly correlated to not only interface states but also border traps in the dielectric. A physical model is proposed describing that electrons can be trapped by both interface states and border traps. Therefore, in order to minimize the V{sub TH} shift during a positive gate bias stress, the gate dielectric needs to have a lower interface state density and less border traps. However, the results also show that the commonly used frequency dependent conductance analysis technique to extract D{sub it} needs to be cautiously used since the resulting value might be influenced by the border traps and, vice versa, i.e., the g{sub m} dispersion commonly attributed to border traps might be influenced by interface states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗