SEARCH · Search NASA
Results for “electron source”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Retrieving the energy-loss function from valence electron energy-loss spectrum: Separation of bulk-, surface-losses and Cherenkov radiation
With recent rapid advancement in electron microscopy instrumentation, in particular, bright electron sources and monochromators, valence electron energy-loss spectroscopy (VEELS) has become attractive for retrieving band structures, optical properties, dielectric functions and phonon information of materials. However, Cherenkov radiation and surface-loss contribution signi cantly alter ne structures of VEELS, even in simple semiconductors and insulators. This leads to the problem that dielectric function or bandgap structure of these materials cannot be determined correctly if these e ects are not removed. In this work we present a solution to this dilemma. We demonstrate that energy-loss function and real part of inverse complex dielectric function can be retrieved from raw data of VEELS. Based on the calculated example of Si, the limitation of our approach is discussed. We believe that our approach represents an improvement over previous procedures and has a broad prospect for applications.
Computational modeling of proton acceleration with multi-picosecond and high energy, kilojoule, lasers
Here, we use computational modeling to investigate proton beam generation from kilojoule, multi-picosecond laser pulses pertinent to several recently commissioned, large-scale laser facilities. The dependencies of proton acceleration on electron source parameters including pulse duration, temperature, and flux are independently and systematically evaluated. Proton acceleration is found to depend not only on the source size and peak temperature of the injected electrons but also on the rate of increase for a more physical time-varying temperature. Simulations of a 10 ps, sub-relativistic intensity (8 × 10 17 W/cm 2 ) at 1 μm wavelength laser pulse show that energetic electrons generated within the expanding under-dense laser-produced plasma sustain the proton acceleration for ~20 ps. This results in 15 MeV energy gain of the protons, well above what would be predicted based on conventional intensity scalings or what has been observed with shorter pulses. Using this prolonged acceleration, a scheme consisting of a 1 ps and 10 ps double pulse is shown to further boost proton maximum energy.
Active nonperturbative stabilization of the laser-plasma-accelerated electron beam source
Not Available
Quantum efficiency and lifetime study for negative electron affinity GaAs nanopillar array photocathode
Recent studies showed significant improvement in quantum efficiency (QE) by negative electron affinity (NEA) GaAs nanopillar array (NPA) photocathodes over their flat surface peers, particularly at 500 ─ 800 nm waveband. However, the underlying physics is yet to be well understood for further improvement in its performance. In this report, NEA GaAs NPA photocathodes with different dimensions were studied. The diameter of the nanopillars varied from 200 ─ 360 nm, the height varied from 230 ─ 1000 nm and the periodicity varied from 470 ─ 630 nm. The QE and photocathode lifetime were measured. Mie-resonance enhancement was observed at tunable resonance wavelengths. Simulations was also performed to understand the mechanism of photo-absorption and possible ways to further improve the photocathode performance to meet the stringent requirement of the electron sources in large scale electron accelerators. **Acknowledgement** Authored by Jefferson Science Associates, LLC under U.S. DOE contract no. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes. *mrahm008@odu.edu
Large Area Electron Beam Source on the Saturn Accelerator
Explore the source record for details and available documents.
RF Sources for Electron Accelerators With a focus on high-duty-factor, low-to-moderate energy architectures
A charged particle, such as an electron or a proton, is accelerated through its interaction with either a static (DC) or time-varying (RF) electric field. The magnitude of the accelerating field, or gradient, is typically given in units of volts per meter; in charged-particle accelerators, fields are usually expressed as kV/m or MV/m. The energy of the accelerated particle is usually expressed in terms of electron volts, or eV. An electron starting at rest at ground potential, and accelerated to an electrode with a potential of 1 kV, will have an energy of 1 keV.
Set-up and demonstration of a Low Energy Electron Magnetometer (LEEM)
Described are the design, construction and test results of a Low Energy Electron Magnetometer (LEEM). The electron source is a commercial electron gun capable of providing several microamperes of electron beam. These electrons, after acceleration through a selected potential difference of 100-300 volts, are sent through two 30 degree second-order focussing parallel plate electrostatic analyzers. The first analyzer acts as a monochromator located in the field-free space. It is capable of providing energy resolution of better than 10 to the -3 power. The second analyzer, located in the test field region, acts as the detector for electrons deflected by the test field. The entire magnetometer system is expected to have a resolution of 1 part in 1000 or better.
A possible SAR arc energization source - Precipitating electrons
Coincident measurements by ground-based photometers and satellite-borne electron sensors have shown the association of precipitating electrons and Stable Auroral Red Arcs at midlatitudes. Modeling of these events has suggested that, within the constraints imposed by uncertainties of the electron energy spectrum, the electron influx carries sufficient energy to establish ionospheric temperatures required to power the arcs.
Novel Low-Cost, Low-Power Miniature Thermionic Cathode Developed for Microwave/Millimeter Wave Tube and Cathode Ray Tube Applications
A low cost, small size and mass, low heater power, durable high-performance barium dispenser thermionic cathode has been developed that offers significant advancements in the design, manufacture, and performance of the electron sources used in vacuum electronic devices--such as microwave (and millimeter wave) traveling-wave tubes (TWT's)--and in display devices such as high-brightness, high-resolution cathode ray tubes (CRT's). The lower cathode heater power and the reduced size and mass of the new cathode are expected to be especially beneficial in TWT's for deep space communications, where future missions are requiring smaller spacecraft, higher data transfer rates (higher frequencies and radiofrequency output power), and greater electrical efficiency. Also expected to benefit are TWT's for commercial and government communication satellites, for both low and geosynchronous Earth orbit, with additional benefits offered by lower cost and potentially higher cathode current loading. A particularly important TWT application is in the microwave power module (MPM), which is a hybrid microwave (or millimeter wave) amplifier consisting of a low-noise solid state driver, a vacuum power booster (small TWT), and an electronic power conditioner integrated into a single compact package. The attributes of compactness and potentially high electrical efficiency make the MPM very attractive for many commercial and government (civilian and defense) applications in communication and radar systems. The MPM is already finding application in defense electronic systems and is under development by NASA for deep space communications. However, for the MPM to become competitive and commercially successful, a major reduction in cost must be achieved.
Modeling the Dynamics of Radiation Belt Electrons With Source and Loss Driven by the Solar Wind
Explore the source record for details and available documents.
A High Brightness, Electron-Based Source of Polarized Photons and Neutrons
Explore the source record for details and available documents.
Start-to-End Beam-Dynamics Simulations of a Compact C-Band Electron Beam Source for High Spectral Brilliance Applications
Explore the source record for details and available documents.
Possible source mechanism for low-energy galactic electrons
Possible source mechanism for low energy galactic electrons
Development of a low noise, cold-cathode traveling-wave tube Final report, 25 Jun. 1964 - 31 Aug. 1965
Traveling wave tube utilizing cold cathode electron source
Physically and chemically smooth cesium-antimonide photocathodes on single crystal strontium titanate substrates
The performance of x-ray free electron lasers and ultrafast electron diffraction experiments is largely dependent on the brightness of electron sources from photoinjectors. Here, the maximum brightness from photoinjectors at a particular accelerating gradient is limited by the mean transverse energy (MTE) of electrons emitted from photocathodes. For high quantum efficiency (QE) cathodes like alkali-antimonide thin films, which are essential to mitigate the effects of non-linear photoemission on MTE, the smallest possible MTE and, hence, the highest possible brightness are limited by the nanoscale surface roughness and chemical inhomogeneity. In this work, we show that high QE Cs 3 Sb films grown on lattice-matched strontium titanate (STO) substrates have a factor of 4 smoother, chemically uniform surfaces compared to those traditionally grown on disordered Si surfaces. We perform simulations to calculate roughness induced MTE based on measured topographical and surface-potential variations on the Cs 3 Sb films grown on STO and show that these variations are small enough to have no consequential impact on the MTE and, hence, the brightness.
Part 1: Detailed Electromagnetic Design of an Integrated and Compact 1.3 GHZ Superconducting Radio Frequency (SRF) Electron
There exists a need for compact, reliable, high-power electron sources for applications including those in water treatment, basic science, defense, and security. There also exists a need for compact electron-beam based light and power sources of various power levels and at different frequencies (mm-wave to gamma rays) for applications also in the fields of basic science, industry, and defense and security. Today’s examples of high-average-power electron sources are neither very compact nor highly efficient. The same may be said for many of the electron-beam based light sources operated worldwide for myriad of applications. Recent breakthroughs in superconducting (SC) materials technology, radio-frequency (RF) power systems, specialized cathodes, and RF cavity designs offer ways to overcome the above-mentioned shortcomings. In this report, all these new features are integrated in a comprehensive design into one promising concept for a compact superconducting RF (SRF) high-average power electron linear accelerator. This design is capable of 5-50 kW average electron beam power and continuous wave operation with the corresponding electron beam energy up to 10 MeV.