Search NASA⌕ Search

SEARCH · Search NASA

Results for “elevation models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Stereocorrelation of Landsat TM images

A digital elevation model (DEM) developed from Landsat TM images of a rugged terrain area in north Georgia by automated stereocorrelation techniques yielded an rms error (z), RMSE(z), value of + or - 42 m. Based on the B/H ratio of 0.18 for the Landsat data, this Z-error corresponds to a planimetric correlation accuracy of about + or - 0.3 pixels, confirming that precise correlation can be achieved with operational satellite data. Contours at a 100-m interval interpolated from the DEM show a deviation of + or - 33 m from reference contours obtained from existing 1:24,000-scale maps. The 28.5-m pixel resolution and the weak B/H ratio impose limitations on the accuracy that can be achieved with Landsat TM data. However, it is anticipated that RMSE(z) values of + or - 10 m or less can be achieved with SPOT-1 panchromatic stereo images of 10-m resolution recorded at B/H ratios of 0.5 to 1.0. DEMs generated by stereocorrelation techniques can be used to create orthoimages, perspective views, and topographic map products.

Ehlers, Manfred↗
NASA NTRS1987

Image based SAR product simulation for analysis

SAR product simulation serves to predict SAR image gray values for various flight paths. Input typically consists of a digital elevation model and backscatter curves. A new method is described of product simulation that employs also a real SAR input image for image simulation. This can be denoted as 'image-based simulation'. Different methods to perform this SAR prediction are presented and advantages and disadvantages discussed. Ascending and descending orbit images from NASA's SIR-B experiment were used for verification of the concept: input images from ascending orbits were converted into images from a descending orbit; the results are compared to the available real imagery to verify that the prediction technique produces meaningful image data.

Domik, G.↗
NASA NTRS1988

Dependence of image grey values on topography in SIR-B images

This paper focuses on the use of a high resolution digital elevation model (DEM) to aid in rectifying and enhancing synthetic aperture radar images. Using a synthetic backscatter image, the SIR-B images are manually rectified and resampled to remove geometric distortions caused by topography. In a second step, an improved reflectance function of incidence angle is derived from the DEM and the rectified image and this function is used to reduce radiometric effects of topography yielding an albedo image which clearly shows the thematic, as opposed to topographic content of the image. The procedure is tested on four SIR-B images of a scene in Argentina (crossover point) that is imaged under different azimuth and incidence angles. The similarity of the resulting images indicates that the procedure effectively reduces artefacts from the images that are dependent on topography.

Domik, G.↗
NASA NTRS1987

Operational use of Landsat data for timber inventory

Landsat TM data, digital elevation model (DEM) data, and field observations were used to generate a timber type/structure and land-cover strata map of the Sequoia National Forest in California, U.S. and to create a classification data set. The spectral classes were identified as 32 information classes of land cover or timber type and structure. DEM data were used for the determination of major timber specie types by topographic regions of natural occurrence. The results suggest that, for inventories over large areas, traditional per-pixel classifiers are not appropriate for TM-resolution data sets over spatially complex regions such as forest lands; either resolution must be degraded, or more context-dependent classifiers, such as the ECHO classifier described by Landgrebe (1979), must be used.

Price, Curtis V.↗
NASA NTRS1989

Downward continuation of the free-air gravity anomalies to the ellipsoid using the gradient solution and terrain correction: An attempt of global numerical computations

The formulas for the determination of the coefficients of the spherical harmonic expansion of the disturbing potential of the earth are defined for data given on a sphere. In order to determine the spherical harmonic coefficients, the gravity anomalies have to be analytically downward continued from the earth's surface to a sphere-at least to the ellipsoid. The goal is to continue the gravity anomalies from the earth's surface downward to the ellipsoid using recent elevation models. The basic method for the downward continuation is the gradient solution (the g sub 1 term). The terrain correction was also computed because of the role it can play as a correction term when calculating harmonic coefficients from surface gravity data. The fast Fourier transformation was applied to the computations.

Wang, Y. M.↗
NASA NTRS1990

Geocoding and stereo display of tropical forest multisensor datasets

Concern about the future of tropical forests has led to a demand for geocoded multisensor databases that can be used to assess forest structure, deforestation, thermal response, evapotranspiration, and other parameters linked to climate change. In response to studies being conducted at the Braulino Carrillo National Park, Costa Rica, digital satellite and aircraft images recorded by Landsat TM, SPOT HRV, Thermal Infrared Multispectral Scanner, and Calibrated Airborne Multispectral Scanner sensors were placed in register using the Landsat TM image as the reference map. Despite problems caused by relief, multitemporal datasets, and geometric distortions in the aircraft images, registration was accomplished to within + or - 20 m (+ or - 1 data pixel). A digital elevation model constructed from a multisensor Landsat TM/SPOT stereopair proved useful for generating perspective views of the rugged, forested terrain.

Welch, R.↗
NASA NTRS1991

Three-dimensional perspective visualization

It was demonstrated that image processing computer graphic techniques can provide an effective means of physiographic analysis of remotely sensed regions through the use of three-dimensional perspective rendering. THe methods used to simulate and animate three-dimensional surfaces from two-dimensional imagery and digital elevation models are explained. A brief historic look at JPL's efforts in this field and several examples of animations, illustrating the evolution of these techniques from 1985, are shown. JPL's current research in this area is discussed along with examples of technology transfer and potential commercial application. The software is part of the VICAR (Video Image Communication and Retrieval) image processing system which was developed at the Multimission Image Processing Laboratory of JPL.

Hussey, Kevin↗
NASA NTRS1990

Revealing topographic lineaments through IHS enhancement of DEM data

Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

Murdock, Gary↗
NASA NTRS1991

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for Earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end to end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗
NASA NTRS1991

Geometric rectification and geocoding of JPL's AIRSAR data over hilly terrain

A post-processing system was developed to georeference and geocode airborne synthetic aperture radar (SAR) data collected by the JPL-Airborne SAR (AIRSAR) System over hilly terrain during the 1990 MAESTRO1 campaign. Georectification relates image coordinates and object coordinates while the geocoding involves resampling. The georectification method uses a hybrid method based upon a number of navigational parameters and minimal two ground-control points which are referenced in both image and map space. The calculation of the intersection of the SAR signal wavefront and a digital elevation model allowed, within certain error bounds, acquisition of the object-to-image and image-to-object relationships.

Degroof, H.↗
NASA NTRS1992

Topography of Apollinaris Patera and Ma'adim Vallis

Digital elevation models of the northern part of Ma'adim Vallis (603a41 607m/pix, 639a91 721m/pix), and Apollinaris Patera (603a42 612m/pix, 639a92 717m/pix), covering the area between 180 degrees to 190 degrees long and -2 degrees to -20 degrees lat. were obtained using a method described here. The results for the Ma'adim Vallis area show broad agreement with the United States Geological Survey (USGS) topographic map of the area with a channel depth of 1 to 2 km. A detailed study of the variations in the channel depth along its course and calculations of its discharge rate from channel cross section and slope are currently being undertaken. Results for Apollinaris Patera have been obtained, although the absolute heights relative to the Mars datum are not well constrained. However, the relative heights are sufficient for some analysis. Again, the topographic map is in reasonable agreement with the USGS map of the area, although there are significant differences.

Thornhill, G. D.↗
NASA NTRS1992

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end-to-end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three-dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗
NASA NTRS1992

New approaches in interferometric SAR data processing

It is well established that interferometric synthetic aperture radar (SAR) images can be inverted to perform surface elevation mapping. Among the factors critical to the mapping accuracy are registration of the interfering SAR images and phase unwrapping. A novel registration algorithm is presented that determines the registration parameters through optimization. A new figure of merit is proposed that evaluates the registration result during the optimization. The phase unwrapping problem is approached through a new method involving fringe line detection. The algorithms are tested with two SEASAT SAR images of terrain near Yellowstone National Park. These images were collected on Seasat orbits 1334 and 1420, which were very close together in space, i.e., less than 100 m. The resultant elevation map is compared with the USGS digital terrain elevation model.

Lin, Qian↗
NASA NTRS1990

Hierarchical approach to reconstruct surfaces by using iteratively rectified imagery

A new approach to reconstruct the 3D surface of the object space from digital images is described. All the object points obtained by an automatic orientation procedure lead to a first approximation of the surface. Edges are computed for one image and matched to the other image by grey level correlation or least-squares matching through the scale space. To every discrete step in the scale space there exists the digital stereopair (image pyramid), the corresponding surface digital elevation model (DEM), and the warped images. The warped images in this discrete scale space representation correspond to digital orthophotos obtained from the DEMs that result from matching the image pyramid. The warped images will be used on every successive level in the image pyramid in order to reduce the foreshortening problems associated with any area-based matching method.

Schenk, Toni↗
NASA NTRS1992

Decorrelation in interferometric radar echoes

A radar interferometric technique for topographic mapping of surfaces promises a high resolution, globally consistent approach to generation of digital elevation models. One implementation approach, that of utilizing a single SAR system in a nearly repeating orbit, is attractive not only for cost and complexity reasons but also in that it permits inference of changes in the surface over the orbit repeat cycle from the correlation properties of the radar echoes. The various sources contributing to the echo correlation statistics are characterized, and the term which most closely describes surficial change is isolated. There is decorrelation increasing with time, but digital terrain model generation remains feasible.

Zebker, Howard A.↗
NASA NTRS1992

Soil moisture variability within remote sensing pixels

The effects of topography and the level of soil moisture on the variability of soil moisture within remote sensing pixels were assessed during the First ISLSCP Field Experiment (FIFE) during 1987 and 1989. Soil moisture data from flat, sloped, and valley-shaped pixels were obtained over a wide range of moisture conditions. Relative elevation data were obtained for each study area to create digital elevation models with which to quantify topographic variability. Within-pixel soil moisture variability was shown to increase with increased topographic heterogeneity. The flat pixel had significantly lower standard deviations and fewer outlier points than the slope and valley pixels. Most pixel means had a positive skewness, indicating that most pixels will have areas of markedly higher than average soil moisture.

Charpentier, Michael A.↗
NASA NTRS1991

Integration of diverse remote sensing data sets for geologic mapping and resource exploration

The use of high-quality multispectral images in the visible, near-infrared, shortwave infrared, thermal infrared, and microwave regions of the spectrum for producing thematic maps showing details of the surface geology is reported. The airborne data sets used in the study include the Airborne Visible/Infrared Imaging Spectrometer, the Thermal Infrared Multispectral Scanner, and the airborne SAR. Ancillary data include a digital elevation model, National High Altitude Photography, Landsat Multispectral Scanner data, Landsat Thematic Mapper data, laboratory and field spectral measurements, and traditional geologic mapping. The integrated, multispectral images are shown to provide new geologic information that can be used in mineral deposit models to provide exploration targets.

Kruse, Fred A.↗
NASA NTRS1992

Radar interferometry studies of the earth's topography

Digital elevation models (DEMs) which have been acquired using the TOPSAR interferometric radar sensor are directly applicable to geological and geophysical studies. Attention is presently given to three illustrative examples of the use of DEMs: the correction of remote-sensing observations for local slope and topographic effects, topographic expressions of erosion and uplift in alluvial fans, and volcanology. The greatest advantages of TOPSAR over conventional photogrammetry include rapidity of data collection, high spatial and vertical resolution, and the ability to obtain contiguous data independent of cloud cover.

Evans, Diane L.↗