Search NASA⌕ Search

SEARCH · Search NASA

Results for “ellipses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Rocket ultraviolet imagery of the Andromeda galaxy

Far-UV electrographic imagery of M31 is presented which was obtained during a sounding-rocket flight with an electrographic Schmidt camera sensitive in the wavelength range from 1230 to 2000 A. The resolution in the imagery is such that 50% of the energy from a point source is confined within a circle 40 arcsec in radius. Two conspicuous features are observed in the UV image of M31: one corresponding to a bright association (NGC 206) in the SW region of the disk and one centered on the galactic nucleus. Indications of the general spiral-arm structure are also evident. Absolute photometry and brightness distributions are obtained for the observed features, and both the central region and NGC 206 are shown to be diffuse sources. It is found that the brightness distribution of the central region is a flat ellipse with its major axis closely aligned with the major axis of the galaxy, which favors a source model consisting of young early-type stars close to the galactic plane and constitutes strong evidence against a nonthermal point source at the galactic center.

Carruthers, G. R.↗
NASA NTRS1978

The rings of Uranus - Results of the 10 April 1978 occultation

Observations of the April 10, 1978, stellar occultation by the rings of Uranus are presented. Nine rings were observed, and their radii and widths are calculated. Rings eta, gamma, and delta are found to be most likely circular and coplanar, in agreement with previous analyses; the remaining rings are either noncircular or slightly inclined. The width of the epsilon ring is a linear function of its radius from the center of Uranus, projected onto the satellites' orbital plane; this suggests that it forms one continuous noncircular ring. The optical-depth profile of the epsilon ring has not changed significantly since March 1977. A model of this ring which fits all available observations adequately is that of a uniformly precessing Keplerian ellipse coplanar with the satellites' orbits. This model permits predictions of the radius and width of the epsilon ring for future occultations. The precession rate is used to determine J2 for Uranus, on the assumption that precession is caused solely by the planetary oblateness and not by satellite-ring interactions.

Nicholson, P. D.↗
NASA NTRS1980

Simplified fatigue life analysis for traction drive contacts

A simplified fatigue life analysis for traction drive contacts of arbitrary geometry is presented. The analysis is based on the Lundberg-Palmgren theory used for rolling-element bearings. The effects of torque, element size, speed, contact ellipse ratio, and the influence of traction coefficient are shown. The analysis shows that within the limits of the available traction coefficient, traction contacts exhibit longest life at high speeds. Multiple, load-sharing roller arrangements have an advantageous effect on system life, torque capacity, power-to-weight ratio and size.

Rohn, D. A.↗
NASA NTRS1978

On orbital fitting with altimeter data

Using altimeter data from a single pass, orbital fiting of these data is investigated. The stability problems of this special kind of short are method as well as the problem in the case of a mean Keplerian ellipse are discussed in detail. It is shown that short periodic perturbations can influence the size of the eccentricity of the satellite orbit computed from these data. In this way the desired result, the corrections of d zeta to the geoidal undulations, may be falsified.

Lelgemann, D.↗
NASA NTRS1979

Precession of the epsilon ring of Uranus

It is noted that the outer and inner boundaries of the epsilon ring of Uranus can be fitted by aligned Keplerian ellipses. Four possible mechanisms for maintaining uniform precession in the epsilon ring are considered: the ring's self-gravity, precession due to a satellite, smooth pressure gradients, and shocklike phenomena. It is proposed that apse alignment is maintained by the self-gravity of the ring. In this case, a ring mass of approximately 5 x 10 to the 18th g and a mean surface density at quadrature of about 25 g/sq cm are estimated.

Goldreich, P.↗
NASA NTRS1980

Confidence regions of planar cardiac vectors

A method for plotting the confidence regions of vectorial data obtained in electrocardiology is presented. The 90%, 95% and 99% confidence regions of cardiac vectors represented in a plane are obtained in the form of an ellipse centered at coordinates corresponding to the means of a sample selected at random from a bivariate normal distribution. An example of such a plot for the frontal plane QRS mean electrical axis for 80 horses is also presented.

Dubin, S.↗
NASA NTRS1980

The fate of the downgoing slab - A study of the moment tensors from body waves of complex deep-focus earthquakes

Two large, complex deep-focus earthquakes are analyzed, using body waves, to determine the relative locations and equivalent forces of the component events. Details of the source mechanism determination are given, with special emphasis on the means of comparing results for double-couple and more general models. The formalism includes a description of a method for calculating the confidence ellipses around the principal axes of the moment tensor. An interpretation of the results suggests that the mechanism of deep-focus earthquakes is controlled by the buoyancy of the slab and the change in viscosity at the 650 km discontinuity.

Strelitz, R. A.↗
NASA NTRS1980

Effects of atmospheric breakup on crater field formation

This paper investigates the physics of meteoroid breakup in the atmosphere and its implications for the observed features of strewn fields. There are several effects which cause dispersion of the meteoroid fragments: gravity, differential lift of the fragments, bow shock interaction just after breakup, centripetal separation by a rotating meteroid, and possibly a dynamical transverse separation resulting from the crushing deceleration in the atmosphere. Of these, it is shown that gravity alone can produce the common pattern in which the largest crater occurs at the downrange end of the scatter ellipse. The average lift-to-drag ratio of the tumbling fragments must be less than about 0.001, otherwise small fragments would produce small craters downrange of the main crater, and this is not generally observed. The cross-range dispersion is probably due to the combined effects of bow shock interaction, crushing deceleration, and possibly spinning of the meteoroid. A number of terrestrial strewn fields are discussed in the light of these ideas, which are formulated quantitatively for a range of meteoroid velocities, entry angles, and crushing strengths. It is found that when the crater size exceeds about 1 km, the separation between the fragments upon landing is a fraction of their own diameter, so that the crater formed by such a fragmented meteoroid is almost indistinguishable from that formed by a solid body of the same total mass and velocity.

Passey, Q. R.↗
NASA NTRS1980

Simplified fatigue life analysis for traction drive contacts

A simplified fatigue life analysis for traction drive contacts of arbitrary geometry is presented. The analysis is based on the Lundberg-Palmgren theory used for rolling-element bearings. The effects of torque, element size, speed, contact ellipse ratio, and the influence of traction coefficient are shown. The analysis shows that within the limits of the available traction coefficient, traction contacts exhibit longest life at high speeds. Multiple, load-sharing roller arrangements have an advantageous effect on system life, torque capacity, power-to-weight ratio and size.

Rohn, D. A.↗
NASA NTRS1980

Induced drag ideal efficiency factor of arbitrary lateral-vertical wing forms

A relatively simple equation is presented for estimating the induced drag ideal efficiency factor e for arbitrary cross sectional wing forms. This equation is based on eight basic but varied wing configurations which have exact solutions. The e function which relates the basic wings is developed statistically and is a continuous function of configuration geometry. The basic wing configurations include boxwings shaped as a rectangle, ellipse, and diamond; the V-wing; end-plate wing; 90 degree cruciform; circle dumbbell; and biplane. Example applications of the e equations are made to many wing forms such as wings with struts which form partial span rectangle dumbbell wings; bowtie, cruciform, winglet, and fan wings; and multiwings. Derivations are presented in the appendices of exact closed form solutions found of e for the V-wing and 90 degree cruciform wing and for an asymptotic solution for multiwings.

Deyoung, J.↗
NASA NTRS1981

Surface temperatures and glassy state investigations in tribology, part 4

Measurements were made of the limiting shear stress for two naphthenic oils of differing molecular weight and three blends of the lower molecular weight oil and polyalkylmethacrylate polymers of differing molecular weight. The two base oils reached the same limiting shear stress for the same temperature and pressure. This was also true for all the polymer solutions although the polymer reduced the limiting shear stress by about 15 percent. It is shown that limiting stress is more a function of material type than viscosity or molecular weight. A new falling body viscometer was constructed to operate to 230 C and 0.6 GPa. Another viscometer was constructed to extend the pressure range to 1.1 GPa. A concentrated contact simulator was developed which allows recording of the traction force while the slide-roll ratio is continuously varied and the rolling speed is maintained essentially constant by a single drive motor. The configuration is that of a crowned roller against a disk. Measurement of lubricant minimum film thickness of elliptical EHD contacts of various aspect ratios were made by optical interferometry. The data collected were used to evaluate the Hamrock and Dowson minimum film thickness model over a range of contract ellipticity ratio where the major axis of the contact ellipse was aligned both parallel and perpendicular to the direction of motion. A statistical analysis of the measured film thickness data showed that on the average the experimental data were 30 percent greater than the film thickness predicted by the model. Preliminary development of the application of a scanning infrared radiation system to a tribo-system was completed.

Bair, S. S.↗
NASA NTRS1980

Vertical slender jets

The shape of a vertical slender jet of fluid falling steadily under the force of gravity is studied. The problem is formulated as a nonlinear free boundary-value problem for the potential. Surface tension effects are neglected. The use of perturbation expansions results in a system of equations that can be solved by an efficient numerical procedure. Computations were made for jets issuing from orifices in various shapes including an ellipse, a rectangle, and an equilateral triangle. Computational results are presented illustrating the propagation of discontinuities and the formation of thin sheets of fluid.

Geer, J. F.↗
NASA NTRS1980

An experimental evaluation of the Hamrock and Dowson minimum film thickness equation for fully flooded EHD point contacts

Fifty-seven measurements of the minimum lubricant film separating the elastohydrodynamically lubricated point contact of a steel crowned roller and a flat sapphire disk were made by an optical interferometry technique. The data collected were used to evaluate the Hamrock and Dowson minimum EHD film thickness model over a practical range of contact ellipticity ratio where the major axis of the contact ellipse is aligned both parallel and perpendicular to the direction of motion. A statistical analysis of the measured film thickness data showed that on the average the experimental data averaged 30 percent greater film thickness than the Hamrock and Dowson model predicts.

Koye, K. A.↗
NASA NTRS1981

Orbits of the small satellites of Saturn

Orbital parameter values determined from Voyager 1 imaging data for the small Saturn satellites 1980S1, 1980S3, 1980S6, 1980S26, 1980S27, and 1980S28 are presented. The dynamic model used for all satellites is a Keplerian ellipse, whose apse and node precess under the influence of the central-body harmonics. In evaluating eccentricity and inclination, it was found that the largest source of error is the difficulty of making measurements when satellites are at, or approaching, transit.

Synnott, S. P.↗
NASA NTRS1981

Polarization characteristics of hydromagnetic waves at low geomagnetic latitudes

A field campaign, using three magnetometer stations spaced in latitude around the equatorial magnetic field distance L approximately 1.9, was conducted in early 1979 to investigate the polarization characteristics of hydromagnetic waves at low geomagnetic latitudes. The magnetic pulsations are observed to have periods in the range approximately 20-25 s and to occur primarily in the local morning hours. Statistically, the polarizations at all three stations were predominantly left handed in the local morning hours and right handed in the local afternoon. At the highest-latitude station (L approximately 2) the orientation of the major axis of the polarization ellipse changed from a predominantly NW-SE direction in the local morning to a mixed NW-SE/NE-SW direction in the afternoon. These two statistical results are consistent with the excitation of the waves by the Kelvin-Helmholtz instability at the magnetopause. However, frequent changes in phase are often observed in the magnetic variations, which result in polarization variations on the time scale of minutes, a situation not readily reconcilable with the Kelvin-Helmholtz instability. The existence of the waves at very low latitudes, furthermore, places constraints on the damping rate of externally excited surface waves inside the magnetosphere. We conclude that present theories for hydromagnetic waves in the geomagnetosphere cannot readily incorporate all of these low-latitude results.

Lanzerotti, L. J.↗
NASA NTRS1982

Design of supercritical cascades with high solidity

The method of complex characteristics of Garabedian and Korn was successfully used to design shockless cascades with solidities of up to one. A code was developed using this method and a new hodograph transformation of the flow onto an ellipse. This code allows the design of cascades with solidities of up to two and larger turning angles. The equations of potential flow are solved in a complex hodograph like domain by setting a characteristic initial value problem and integrating along suitable paths. The topology that the new mapping introduces permits a simpler construction of these paths of integration.

Sanz, J. M.↗
NASA NTRS1982

Acoustically induced oscillation and rotation of a large drop in space

A 2.5 cm diameter water drop was successfully deployed and manipulated in a triaxial acoustic resonance chamber during a 240 sec low-gravity SPAR rocket flight. Oscillation and rotation were induced by modulating and phase shifting the signals to the speakers. Portions of the film record were digitized and analyzed. Spectral analysis brought out the n = 2, 3, 4 free oscillation modes of the drop, its very low-frequency center-of-mass motion in the acoustic potential well, and the forced oscillation frequency. The drop boundaries were least-square fitted to general ellipses, providing eccentricities of the distorted drop. The normalized equatorial area of the rotating drop was plotted vs a rotational parameter, and was in excellent agreement with values derived from the theory of equilibrium shapes of rotating liquid drops.

Jacobi, N.↗