Search NASA⌕ Search

SEARCH · Search NASA

Results for “elliptical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Heat Transfer Coefficients of Additively Manufactured Tubes with Internal Pin Fins for Supercritical Carbon Dioxide Cycle Recuperators

This paper describes the measurement of convective heat transfer coefficients and friction factors for sCO 2 flowing in additively manufactured tubes with internal pin fins at the US DOE’s National Energy Technology Laboratory in Morgantown, WV. The measurement procedures were validated by conducting benchmark tests with smooth stainless-steel tube and comparing the results with published correlations for Nusselt number (Nu) and friction factor. Over Reynolds numbers (ReD) ranging from 5 × 10 4 to 2.5 × 10 5 , measured Nu was within 5% of the Dittus-Boelter correlation and measured friction factors were within 5% of the McAdams correlation for smooth tube flow. The candidate pin fin patterned pipes were additively manufactured (AM) at the Oak Ridge National Laboratory. The pins were circular or elliptical in cross-section and were printed at a 30⁰ angle relative to the inner wall (to meet AM constraints). The pin arrangement was helical to promote enhanced heat transfer due to swirl flow. Pin length to diameter aspect ratio was 1.33, 2, and 8, while the pin diameter to tube diameter ratio was 0.188, 0.125, and 0.063. Tests were performed for ReD varying from 6.9 × 10 4 to 2.2 × 10 5 and at conditions equivalent to the low pressure (LP) outlet (8.69 MPa, 361 K) and the high pressure (HP) inlet (20.7 MPa, 350 K) of the low temperature recuperator (LTR) in an indirect sCO 2 cycle. The Wilson plot technique was utilized to measure the bulk heat transfer coefficients. For the best performing design (tube A, pin length to tube diameter ratio: 1.33, pin diameter to tube diameter ratio: 0.19), the local heat transfer coefficient increased by 136% relative to the Dittus-Boelter correlation at the LTR low pressure outlet and 194% at the LTR high pressure inlet. These correspond to a 282% and a 271% increase in the product of the heat transfer coefficient and surface area (adjusted for fin efficiency) product, respectively. Large pressure drops across the test articles were observed. For Tube Design A, the average friction factor, across the range of ReD considered, was significantly larger than the McAdams correlation at both the LTR LP outlet and the LTR HP inlet. A thermal performance factor was utilized to express the ratio of material required to build a finned heat exchanger relative to a finless heat exchanger with the same heat duty and pumping power. Tube Design A was estimated to decrease the required heat exchanger material by 13%.

Searle, Matthew↗
DOE OSTI2022

Goal-oriented a-posteriori estimation of model error as an aid to parameter estimation

In this work, a Bayesian model calibration framework is presented that utilizes goal-oriented a-posterior error estimates in quantities of interest (QoIs) for classes of high-fidelity models characterized by PDEs. It is shown that for a large class of computational models, it is possible to develop a computationally inexpensive procedure for calibrating parameters of high-fidelity models of physical events when the parameters of low-fidelity (surrogate) models are known with acceptable accuracy. The main ingredients in the proposed model calibration scheme are goal-oriented a-posteriori estimates of error in QoIs computed using a so-called lower fidelity model compared to those of an uncalibrated higher fidelity model. The estimates of error in QoIs are used to define likelihood functions in Bayesian inversion analysis. A standard Bayesian approach is employed to compute the posterior distribution of model parameters of high-fidelity models. As applications, parameters in a quasi-linear second-order elliptic boundary-value problem (BVP) are calibrated using a second-order linear elliptic BVP. In a second application, parameters of a tumor growth model involving nonlinear time-dependent PDEs are calibrated using a lower fidelity linear tumor growth model with known parameter values.

A-posterior estimates↗
DOE OSTI2025

In-situ L-TEM observations of dynamics of nanometric skyrmions and antiskyrmions

Nanometer-scale magnetic skyrmions and antiskyrmions exhibit unique dynamical behaviors in response to external stimuli, which are critical for their applications in low-power-consumption spintronic devices. This review discusses recent advancements in in-situ Lorentz transmission electron microscopy (L-TEM) observations of skyrmion and antiskyrmion dynamics, and demonstrates the manipulation and evolution of these textures in various magnetic materials under electric, magnetic, and thermal stimuli. Specifically, the motion tracking of single skyrmions and their clusters, and the deformation and transformation of skyrmions has been demonstrated in chiral helimagnets FeGe, Co 9 Zn 9 Mn 2 , and Co 10 Zn 10 with precise application of electric currents. Skyrmions can undergo dynamic transitions in current-driven skyrmion motions, from pinned states to linear flows, and even exhibit deformation into elliptical shapes, underscoring their topological robustness and dynamic flexibility. In addition, the manipulation of single antiskyrmions and antiskyrmion-lattice phases in (Fe 0.63 Ni 0.3 Pd 0.07 ) 3 P with S 4 symmetry is discussed, highlighting their high mobility and unique sliding capabilities along stripe domains at room temperature, facilitated by nanosecond pulsed electric currents. Finally, the temperature gradient-driven motion and topological transformation of elliptical skyrmions and antiskyrmions in this same material are investigated. In conclusion, the comprehensive insights gained from the L-TEM imaging technique are pivotal in advancing the design and functionality of next-generation skyrmion/antiskyrmion-based spintronic devices.

(Anti)skyrmion↗
DOE OSTI2020

Ultracentral Collisions of Small and Deformed Systems at RHIC

We study a range of collision systems involving deformed ions and compare the elliptic and triangular flow harmonics produced in a hydrodynamics scenario versus a color glass condensate (CGC) scenario. For the hydrodynamics scenario, we generate initial conditions using TRENTO and work within a linear response approximation to obtain the final flow harmonics. For the CGC scenario, we use the explicit calculation of two-gluon correlations taken in the high-p T “(semi)dilute-(semi)dilute” regime to express the flow harmonics in terms of the density profile of the collision. Here, we consider ultracentral collisions of deformed ions as a testbed for these comparisons because the difference between tip-on-tip and side-on-side collisions modifies the multiplicity dependence in both scenarios, even at zero impact parameter. We find significant qualitative differences in the multiplicity dependence obtained in the initial conditions+hydrodynamics scenario and the CGC scenario, allowing these collisions of deformed ions to be used as a powerful discriminator between models. We also find that sub-nucleonic fluctuations have a systematic effect on the elliptic and triangular flow harmonics which are most discriminating in 0–1% ultracentral symmetric collisions of small deformed ions and in 0–10% d197Au collisions. The collision systems we consider are 238 U 238 U, d 197 Au, 9 Be 197 Au, 9 Be 9 Be, 3 He 3 He, and 3 He 197 Au.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Transverse-momentum and event-shape dependence of D-meson flow harmonics in Pb–Pb collisions at s NN = 5.02 TeV

The elliptic and triangular flow coefficients v 2 and v 3 of prompt D 0 , D + , and D * + mesons were measured at midrapidity ( | y | < 0.8 ) in Pb–Pb collisions at the centre-of-mass energy per nucleon pair of s NN = 5.02 TeV with the ALICE detector at the LHC. The D mesons were reconstructed via their hadronic decays in the transverse momentum interval 1 < p T < 36 GeV / c in central (0–10%) and semi-central (30–50%) collisions. Compared to pions, protons, and J / ψ mesons, the average D-meson v n harmonics are compatible within uncertainties with a mass hierarchy for p T ≲ 3 GeV / c , and are similar to those of charged pions for higher p T . The coupling of the charm quark to the light quarks in the underlying medium is further investigated with the application of the event-shape engineering (ESE) technique to the D-meson v 2 and p T -differential yields. The D-meson v 2 is correlated with average bulk elliptic flow in both central and semi-central collisions. Within the current precision, the ratios of per-event D-meson yields in the ESE-selected and unbiased samples are found to be compatible with unity. All the measurements are found to be reasonably well described by theoretical calculations including the effects of charm-quark transport and the recombination of charm quarks with light quarks in a hydrodynamically expanding medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Search for the chiral magnetic effect in Au+Au collisions at $\sqrt{s_{NN}}$ = 27 GeV with the STAR forward event plane detectors

A decisive experimental test of the Chiral Magnetic Effect (CME) is considered one of the major scientific goals at the Relativistic Heavy-Ion Collider (RHIC) towards understanding the nontrivial topological fluctuations of the Quantum Chromodynamics vacuum. In heavy-ion collisions, the CME is expected to result in a charge separation phenomenon across the reaction plane, whose strength could be strongly energy dependent. The previous CME searches have been focused on top RHIC energy collisions. In this Letter, we present a low energy search for the CME in Au+Au collisions at $\sqrt{s_{NN}}$ = 27 GeV. We measure elliptic flow scaled charge-dependent correlators relative to the event planes that are defined at both mid-rapidity |η| < 1.0 and at forward rapidity 2.1 < |η| < 5.1. We compare the results based on the directed flow plane ( $Ψ$ 1 ) at forward rapidity and the elliptic flow plane ( $Ψ$ 2 ) at both central and forward rapidity. The CME scenario is expected to result in a larger correlation relative to $Ψ$ 1 than to $Ψ$ 2 , while a flow driven background scenario would lead to a consistent result for both event planes. In 10-50% centrality, results using three different event planes are found to be consistent within experimental uncertainties, suggesting a flow driven background scenario dominating the measurement. We obtain an upper limit on the deviation from a flow driven background scenario at the 95% confidence level. This work opens up a possible road map towards future CME search with the high statistics data from the RHIC Beam Energy Scan Phase-II.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Whistler Waves Associated With Electron Beams in Magnetopause Reconnection Diffusion Regions

Abstract Whistler waves are often observed in magnetopause reconnection associated with electron beams. We analyze seven MMS crossings surrounding the electron diffusion region (EDR) to study the role of electron beams in whistler excitation. Waves have two major types: (a) Narrow‐band waves with high ellipticities and (b) broad‐band waves that are more electrostatic with significant variations in ellipticities and wave normal angles. While both types of waves are associated with electron beams, the key difference is the anisotropy of the background population, with perpendicular and parallel anisotropies, respectively. The linear instability analysis suggests that the first type of wave is mainly due to the background anisotropy, with the beam contributing additional cyclotron resonance to enhance the wave growth. The second type of broadband waves are excited via Landau resonance, and as seen in one event, the beam anisotropy induces an additional cyclotron mode. The results are supported by particle‐in‐cell simulations. We infer that the first type occurs downstream of the central EDR, where background electrons experience Betatron acceleration to form the perpendicular anisotropy; the second type occurs in the central EDR of guide field reconnection. A parametric study is conducted with linear instability analysis. A beam anisotropy alone of above ∼3 likely excites the cyclotron mode waves. Large beam drifts cause Doppler shifts and may lead to left‐hand polarizations in the ion frame. Future studies are needed to determine whether the observation covers a broader parameter regime and to understand the competition between whistler and other instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Engineering chirality at wafer scale with ordered carbon nanotube architectures

Creating artificial matter with controllable chirality in a simple and scalable manner brings new opportunities to diverse areas. Here we show two such methods based on controlled vacuum filtration - twist stacking and mechanical rotation - for fabricating wafer-scale chiral architectures of ordered carbon nanotubes (CNTs) with tunable and large circular dichroism (CD). By controlling the stacking angle and handedness in the twist-stacking approach, we maximize the CD response and achieve a high deep-ultraviolet ellipticity of 40 ± 1 mdeg nm -1 . Our theoretical simulations using the transfer matrix method reproduce the experimentally observed CD spectra and further predict that an optimized film of twist-stacked CNTs can exhibit an ellipticity as high as 150 mdeg nm -1 , corresponding to a g factor of 0.22. Furthermore, the mechanical rotation method not only accelerates the fabrication of twisted structures but also produces both chiralities simultaneously in a single sample, in a single run, and in a controllable manner. The created wafer-scale objects represent an alternative type of synthetic chiral matter consisting of ordered quantum wires whose macroscopic properties are governed by nanoscopic electronic signatures and can be used to explore chiral phenomena and develop chiral photonic and optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Probing topological phase transitions using high-harmonic generation

We report the prediction and realization of topological insulators have sparked great interest in experimental approaches to the classification of materials. The phase transition between non-trivial and trivial topological states is important, not only for basic materials science but also for next-generation technology, such as dissipation-free electronics. It is therefore crucial to develop advanced probes that are suitable for a wide range of samples and environments. Here we demonstrate that circularly polarized laser-field-driven high-harmonic generation is distinctly sensitive to the non-trivial and trivial topological phases in the prototypical three-dimensional topological insulator bismuth selenide. The phase transition is chemically initiated by reducing the spin–orbit interaction strength through the substitution of bismuth with indium atoms. We find strikingly different high-harmonic responses of trivial and non-trivial topological surface states that manifest themselves as a conversion efficiency and elliptical dichroism that depend both on the driving laser ellipticity and the crystal orientation. The origins of the anomalous high-harmonic response are corroborated by calculations using the semiconductor optical Bloch equations with pairs of surface and bulk bands. As a purely optical approach, this method offers sensitivity to the electronic structure of the material, including its nonlinear response, and is compatible with a wide range of samples and sample environments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

The edges of galaxies: Tracing the limits of star formation

The outskirts of galaxies have been studied from multiple perspectives for the past few decades. However, it is still unknown if all galaxies have clear-cut edges similar to everyday objects. We address this question by developing physically motivated criteria to define the edges of galaxies. Based on the gas density threshold required for star formation, we define the edge of a galaxy as the outermost radial location associated with a significant drop in either past or ongoing in situ star formation. We explore ~1000 low-inclination galaxies with a wide range in morphology (dwarfs to ellipticals) and stellar mass (10 7 M ⊙ < M * < 10 12 M ⊙ ). The location of the edges of these galaxies (R edge ) were visually identified as the outermost cutoff or truncation in their radial profiles using deep multi-band optical imaging from the IAC Stripe82 Legacy Project. We find this characteristic feature at the following mean stellar mass density, which varies with galaxy morphology: 2.9 ± 0.10 M ⊙ pc -2 for ellipticals, 1.1 ± 0.04 M ⊙ pc -2 for spirals, and 0.6 ± 0.03 M ⊙ pc -2 for present-day star-forming dwarfs. Additionally, we find that R edge depends on its age (colour) where bluer galaxies have larger R edge at a fixed stellar mass. The resulting stellar mass–size plane using R edge as a physically motivated galaxy size measure has a very narrow intrinsic scatter (≲0.06 dex). These results highlight the importance of new deep imaging surveys to explore the growth of galaxies and trace the limits of star formation in their outskirts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Faraday effect in collisional magnetized plasmas

Faraday rotation is a valuable diagnostic tool for investigating laboratory and astrophysical plasmas, but it has almost exclusively been treated in the collisionless limit (despite the non-negligible role of Coulomb collisions in many laboratory plasmas). Here, we show that Faraday rotation can occur in collisional plasmas and that the usual effect is curiously altered by collisions. Namely, an initially linearly polarized light wave—propagating parallel to a uniform magnetic field—becomes elliptically polarized in the collisional plasma, and collisional absorption of the wave also occurs. Moreover, the ellipticity and rotation angle are quantifiably sensitive to the fidelity of the collisional transport coefficients. As we will demonstrate with particle-in-cell EPOCH simulations, these effects offer a stringent diagnostic tool for benchmarking multi-scale plasma simulation codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Testing the optical components for the National Ignition Facility time-resolved soft x-ray opacity spectrometer (OpSpecTR)

Opacity measurements are being carried out at the Z-facility at Sandia National Laboratories and at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. The current soft x-ray Opacity Spectrometer (OpSpec) used on the NIF uses two elliptically bent crystals in time-integrated mode on either an image plate or a film. Plans are under way to expand these opacity measurements into a mode of time-resolved detection, called OpSpecTR. Previously, considerations for the available hCMOS detector size and photometrics led to a crystal geometry redesign and the use of a grazing angle x-ray mirror. The mirror acts as a low-pass x-ray energy filter, reducing the contribution of higher energy x rays. The first tests of the mirror and the crystal for OpSpecTR are presented here. The size of the mirror reflection and the reflectivity is tested using a Manson x-ray source. The mirror coupled with the new elliptical crystal shape demonstrates OpSpecTR’s spectral coverage. Finally, the results from the x-ray optics performance testing are shown along with the intended design.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Astigmatic electron beam propagation

An astigmatic electron beam with an ellipticity ratio of approximately 2:1 was examined using the Enhanced Modified Faraday Cup (EMFC) diagnostic to measure its properties and show how the power density distribution varies near the beam waist. Results show that the beam has two power density peaks, one on either side of the beam crossover point, resulting from different focal distances of the major and minor axes of the elliptical beam shape. Quantification of the beam properties was used to establish a depth-of-field where the beam diameter and peak power densities are relatively constant. For the 1 kW beam studied here, the depth-of-field measured approximately ±5 mm from the beam crossover point, illustrating how electron beam diagnostics can be used to identify process control limits for repeatable and reliable welds under non-ideal electron beam power density distribution conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plasma breakdown in bubbles passing between two pin electrodes

The ignition of plasmas in liquids has applications from medical instrumentation to manipulation of liquid chemistry. Formation of plasmas directly in a liquid often requires prohibitively large voltages to initiate breakdown. Producing plasma streamers in bubbles submerged in a liquid with higher permittivity can significantly lower the voltage needed to initiate a discharge by reducing the electric field required to produce breakdown. The proximity of the bubble to the electrodes and the shape of the bubbles play critical roles in the manner in which the plasma is produced in, and propagates through, the bubble. In this paper, we discuss results from a three-dimensional direct numerical simulation (DNS) used to investigate the shapes of bubbles formed by injection of air into water. Comparisons are made to results from a companion experiment. A two-dimensional plasma hydrodynamics model was then used to capture the plasma streamer propagation in the bubble using a static bubble geometry generated by the DNS The simulations showed two different modes for streamer formation depending on the bubble shape. In an elliptical bubble, a short electron avalanche triggered a surface ionization wave (SIWs) resulting in plasma propagating along the surface of the bubble. In a circular bubble, an electron avalanche first traveled through the middle of the bubble before two SIWs began to propagate from the point closest to the grounded electrode where a volumetric streamer intersected the surface. In an elliptical bubble approaching a powered electrode in a pin-to-pin configuration, we experimentally observed streamer behavior that qualitatively corresponds with computational results. Optical emission captured over the lifetime of the streamer curve along the path of deformed bubbles, suggesting propagation of the streamer along the liquid/gas boundary interface. Plasma generation supported by the local field enhancement of the deformed bubble surface boundaries is a mechanism that is likely responsible for initiating streamer formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Heavy flavor quenching and flow: the roles of initial condition, pre-equilibrium evolution, and in-medium interaction

Within an advanced Langevin-hydrodynamics framework coupled to a hybrid fragmentation-coalescence hadronization model, we study heavy flavor quenching and flow in relativistic heavy-ion collisions. We investigate how the initial heavy quark spectrum, the in-medium energy loss and hadronization mechanisms of heavy quarks, the evolution profile of the pre-equilibrium stage, the medium flow, and the temperature dependence of heavy quark diffusion coefficients influence the suppression and elliptic flow of heavy mesons at the RHIC and the LHC. Our results show that the different modeling of initial conditions, pre-equilibrium evolution, and in-medium interactions can individually yield uncertainties of approximately 10-40% in D meson suppression and flow at a low transverse momentum. Furthermore, we also find that proper combinations of collisional versus radiative energy loss, coalescence versus fragmentation in hadronization, and the inclusion of medium flow are the most important factors for describing the suppression and elliptic flow of heavy mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Bayesian inference of nuclear incompressibility from collective flow in mid-central Au+Au collisions at 400–1500 MeV/nucleon

The incompressibility K of symmetric nuclear matter (SNM) is determined through a Bayesian analysis of collective flow data from Au + Au collisions at beam energies $E = 400 -1500$ MeV/nucleon. This analysis utilizes a Gaussian process (GP) emulator applied to the isospin-dependent quantum molecular dynamics (IQMD) model for heavy-ion collisions, both with and without incorporating the momentum dependence of the single-nucleon potentials. Specifically, at the 68% confidence level, using rapidity and transverse velocity dependence of proton elliptic flow data with and without consideration of the momentum dependence, the inferred incompressibility values are $K=188.9^{+2.9}_{-4.5}$ MeV and $256.1^{+8.2}_{-8.7}$ MeV at $E = 400$ MeV/nucleon, respectively. When the transverse momentum dependence of proton-like directed flow data is included, the inferred incompressibility values become $K=222.3^{+9.0}_{-9.9}$ MeV and $K=285.5^{+6.7}_{-7.3}$ MeV, respectively. Furthermore, we found that the value of K derived from observables of proton elliptic flow increases with beam energy. Finally, this indicates that the equation of state (EoS) of nuclear matter hardens at higher densities and temperatures in reactions with higher beam energies.

Bayesian inference↗
DOE OSTI2024

Sparse Cholesky factorization for solving nonlinear PDEs via Gaussian processes

In recent years, there has been widespread adoption of machine learning-based approaches to automate the solving of partial differential equations (PDEs). Among these approaches, Gaussian processes (GPs) and kernel methods have garnered considerable interest due to their flexibility, robust theoretical guarantees, and close ties to traditional methods. They can transform the solving of general nonlinear PDEs into solving quadratic optimization problems with nonlinear, PDE-induced constraints. However, the complexity bottleneck lies in computing with dense kernel matrices obtained from pointwise evaluations of the covariance kernel, and its partial derivatives, a result of the PDE constraint and for which fast algorithms are scarce. The primary goal of this paper is to provide a near-linear complexity algorithm for working with such kernel matrices. We present a sparse Cholesky factorization algorithm for these matrices based on the near-sparsity of the Cholesky factor under a novel ordering of pointwise and derivative measurements. The near-sparsity is rigorously justified by directly connecting the factor to GP regression and exponential decay of basis functions in numerical homogenization. We then employ the Vecchia approximation of GPs, which is optimal in the Kullback-Leibler divergence, to compute the approximate factor. This enables us to compute ϵ-approximate inverse Cholesky factors of the kernel matrices with complexity O(N log d (N/ϵ)) in space and O(N log 2d (N/ϵ)) in time. We integrate sparse Cholesky factorizations into optimization algorithms to obtain fast solvers of the nonlinear PDE. We numerically illustrate our algorithm’s near-linear space/time complexity for a broad class of nonlinear PDEs such as the nonlinear elliptic, Burgers, and Monge-Ampère equations. In summary, we provide a fast, scalable, and accurate method for solving general PDEs with GPs and kernel methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Galaxy properties as revealed by MaNGA – III. Kinematic profiles and stellar population gradients in S0s

ABSTRACT This is the third paper of a series where we study the stellar population gradients (SP; ages, metallicities, α-element abundance ratios, and stellar initial mass functions) of early-type galaxies (ETGs) at $z$ ≤ 0.08 from the Mapping Nearby Galaxies at APO Data Release 15 (MaNGA-DR15) survey. In this work, we focus on the S0 population and quantify how the SP varies across the population as well as with galactocentric distance. We do this by measuring Lick indices and comparing them to SP synthesis models. This requires spectra with high signal-to-noise ratio which we achieve by stacking in bins of luminosity (Lr) and central velocity dispersion (σ0). We find that: (1) there is a bimodality in the S0 population: S0s more massive than $3\times 10^{10}\, \mathrm{M}_\odot$ show stronger velocity dispersion and age gradients (age and σr decrease outwards) but little or no metallicity gradient, while the less massive ones present relatively flat age and velocity dispersion profiles, but a significant metallicity gradient (i.e. [M/H] decreases outwards). Above $2\times 10^{11}\, \mathrm{M}_\odot$, the number of S0s drops sharply. These two mass scales are also where global scaling relations of ETGs change slope. (2) S0s have steeper velocity dispersion profiles than fast-rotating elliptical galaxies (E-FRs) of the same luminosity and velocity dispersion. The kinematic profiles and SP gradients of E-FRs are both more similar to those of slow-rotating ellipticals (E-SRs) than to S0s, suggesting that E-FRs are not simply S0s viewed face-on. (3) At fixed σ0, more luminous S0s and E-FRs are younger, more metal rich and less α-enhanced. Evidently for these galaxies, the usual statement that ‘massive galaxies are older’ is not true if σ0 is held fixed.

Domínguez Sánchez, H.↗