Large UV/Optical/Infrared Surveyor: Telling the Story of Life in the Universe. Exoplanet Transmission Spectroscopy with LUVOIR
Exoplanet Transmission Spectroscopy with LUVOIR
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Exoplanet Transmission Spectroscopy with LUVOIR
The proposed Habitable Exoplanet (HabEx) astrophysics facility is one of four large such facilities being proposed to the 2020 decadal. It is a large telescope that is sensitive to ultraviolet, optical, and near-infrared photons. The proposed design’s overall length is on the order of 17.2 m and its maximum cross section is on the order of 5.25 X 5.25 m. The primary mirror is 4 m in diameter. A transient dynamic analysis was performed to estimate the order of magnitude of ring down time after moving the telescope and pointing at a new target for science planning purposes. Without uncertainty factors, results from a simple re-pointing maneuver indicate that primary to secondary mirror LOS errors are on the order of 10-4 pico-m after 5 minutes. Also, a frequency response analysis was performed to predict the impact of planned micro-thruster vibrations on required stability. Based on provided noise level associated with the micro-thrusters and loading assumptions and without uncertainty factors, the assessed vibrations do not impact predicted performance requirements.
The Habitable Exoplanet Observatory (HabEx) is one of four mission concepts under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 115 to 2500 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving the HabEx science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is 4-meter off-axis unobscured, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. The technology readiness level (TRL) to manufacture and test the HabEx baseline primary mirror is assessed to be at TRL-6 for all but two TRL-4 technologies: 1) non-destructive process to quantify CTE homogeneity of a 4-m mirror substrate with a spatial sampling of at least 100 x 100 to better than +/- 1 ppb/K; and, 2) process to quantify self-weight gravity deflection to better than 4-nm rms over a 100 x 100 spatial sampling. This paper reviews the technology needs to manufacture the HabEx primary mirror, assesses their TRL and proposes a roadmap to mature the two remaining technologies to TRL-6.
The principal science goal of directly imaging exoplanets is spectroscopy. At Subaru, the SCExAO instrument uses the CHARIS integral field spectrograph (IFS) to take spectra of young, self-luminous companions and disks in the near-infrared. CHARIS provides both R70 and R20 spectral resolutions across the J, H, and K bands. Of the two, R20 is the primary observing mode, which provides both excellent spectral coverage of the companions and a larger bandpass for advanced speckle subtraction techniques. Looking to the future, the WFIRST CoronaGraph Instrument (CGI) is a technology demonstration for future missions whose spectroscopic techniques are rooted in what has been demonstrated at ground observatories. CGI will reach very high contrast in broadband light with advanced wavefront control and coronagraphy techniques, paving the way for characterizing Earth-like planets. The spectral resolution of CGI spectroscopic modes is R50 with 15% bandpasses from 600 to 970nm. The calibration, speckle subtraction, and spectral extraction methods for CGI spectroscopy has a strong heritage from techniques developed for SCExAO+CHARIS. We discuss such synergies between CHARIS and CGI characterization capabilities from both a science and engineering perspective, including the new Wollaston polarization upgrade to CHARIS.
The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions studied for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 115 to 1700 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving its science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the baseline optical telescope assembly, including a discussion of how we applied science driven systems engineering to derive the telescope’s engineering specifications from the mission’s science requirements, and presents analysis that the baseline telescope structure meets its specified tolerances.
Here we present optical constants covering a broad wavelength range, from the visible to the far infrared, for Titan aerosol analogs produced in the Titan Haze Simulation (THS) experiment at Ames COSmIC facility, as well as other exoplanet-relevant materials.
Robust atmospheric and radiative transfer modeling will be required to properly interpret reflected light and thermal emission spectra of terrestrial exoplanets. This will help break observational degeneracies between the numerous atmospheric, planetary, and stellar factors that drive planetary climate. Here we simulate the climates of Earth-like worlds around the Sun with increasingly slow rotation periods, from Earth-like to fully Sun-synchronous, using the ROCKE-3D general circulation model. We then provide these results as input to the Spectral Planet Model (SPM), which employs the SMART radiative transfer model to simulate the spectra of a planet as it would be observed from a future space-based telescope. We find that the primary observable effects of slowing planetary rotation rate are the altered cloud distributions, altitudes, and opacities which subsequently drive many changes to the spectra by altering the absorption band depths of biologically-relevant gas species (e.g., H2O, O2, and O3). We also identify a potentially diagnostic feature of synchronously rotating worlds in mid-infrared H2O absorption/emission lines.
We report the discovery of TOI-172 b from the Transiting Exoplanet Survey Satellite (TESS) mission, a massive hot Jupiter transiting a slightly evolved G star with a 9.48-day orbital period. This is the first planet to be confirmed from analysis of only the TESS full frame images, because the host star was not chosen as a two-minute cadence target. From a global analysis of the TESS photometry and follow-up observations carried out by the TESS Follow-up Observing Program Working Group, TOI-172 (TIC 29857954) is a slightly evolved star with an effective temperature of T(eff) = 5645 ± 50 K, a mass of M(⋆) =1.128(sub -0.061, sup +0.065) M(☉), radius of R(⋆) =1.777(sub -0.044, sup +0.047) R(☉), a surface gravity of log g(⋆) =3.993(sub -0.028, sup +0.027), and an age of 7.4(sub -1.5, sup +1.6) Gyr. Its planetary companion (TOI-172 b) has a radius of R(P) =0.965(sub -0.029, sup +0.032) R(J), a mass of M(P) =5.42(sub -0.20, sup +0.22) M(J), and is on an eccentric orbit (e=0.3806(sub -0.0090, sup +0.0093)). TOI-172 b is one of the few known massive giant planets on a highly eccentric short-period orbit. Future study of the atmosphere of this planet and its system architecture offer opportunities to understand the formation and evolution of similar systems.
The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planets in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 115 to 1700 nm spectral range and 3x3 arc-minute FOV instruments. Critical to achieving its science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the HabEx baseline optical telescope assembly, including a discussion of how science requirements drive the telescope’s specifications, and presents analysis that the baseline telescope structure meets its specified tolerances.
The Cen AB system represents a particularly attractive target for missions to directly image exoplanets. A potentially habitable planet can in theory be imaged in the system with a telescope as small as 40cm, provided it has a powerful enough starlight suppression system. Technology to enable this is rapidly maturing, and there have been several mission concept studies. This technology is relevant to missions like WFIRST, LUVOIR, and HabEx because it enables them to image binary stars. Small coronagraph mission concepts described here would also complement and synergize with all the above missions. We suggest that a stronger ongoing program is needed, perhaps building on the recent Small Sat concept study initiative, to support mission concept and proposal development for Small Sats ($35M), Missions of Opportunity ($75M) and possibly up through Explorer missions.
The HabEx (Habitable Exoplanet) space telescope mission concept carries two complementary optical systems as part of its baseline design, a coronagraph and a starshade, that are designed to detect and characterize planetary systems around nearby stars. The starshade is an external occulter which would be 72 m in diameter and fly some 124,000 km ahead of the telescope. A starshade instrument on board the telescope enables formation flying to maintain the starshade within 1 m of the line of sight to the star. The starshade instrument has various modes, including imaging from the near UV through to the near infrared and integral field spectroscopy in the visible band. The coronagraph would provide imaging and integral field spectroscopy in the visible band and would reach out to 1800 nm for low resolution spectroscopy in the near infrared. To provide the necessary stability for the coronagraph, the telescope would be equipped with a laser metrology system allowing measurement and control of the relative positions of the principal mirrors. In addition, a fine guidance sensor is needed for precision attitude control. The requirements for telescope stability for coronagraphy are discussed. The design and requirements on the starshade will also be discussed.
M dwarf stars are excellent candidates around which to search for exoplanets, including temperate, Earth-sized planets. To evaluate the photochemistry of the planetary atmosphere, it is essential to characterize the UV spectral energy distribution of the planet's host star. This wavelength regime is important because molecules in the planetary atmosphere such as oxygen and ozone have highly wavelength-dependent absorption cross sections that peak in the UV (900–3200 Å). We seek to provide a broadly applicable method of estimating the UV emission of an M dwarf, without direct UV data, by identifying a relationship between noncontemporaneous optical and UV observations. Our work uses the largest sample of M dwarf star far- and near-UV observations yet assembled. We evaluate three commonly observed optical chromospheric activity indices—Hα equivalent widths and log(10) L(Hα)/L(bol), and the Mount Wilson Ca ii H&K S and R'(HK) indices—using optical spectra from the HARPS, UVES, and HIRES archives and new HIRES spectra. Archival and new Hubble Space Telescope COS and STIS spectra are used to measure line fluxes for the brightest chromospheric and transition region emission lines between 1200 and 2800 Å. Our results show a correlation between UV emission-line luminosity normalized to the stellar bolometric luminosity and Ca ii R'(HK) with standard deviations of 0.31–0.61 dex (factors of ∼2–4) about the best-fit lines. We also find correlations between normalized UV line luminosity and Hα log(10) L(Hα)/L(bol) and the S index. These relationships allow one to estimate the average UV emission from M0 to M9 dwarfs when UV data are not available.
We present the discovery and characterisation of two transiting planets observed by the Transiting Exoplanet Survey Satellite (TESS) orbiting the nearby (d⋆ ≈ 22 pc), bright (J ≈ 9 mag) M3.5 dwarf LTT 3780 (TOI–732). We confirm both planets and their association with LTT 3780 via ground-based photometry and determine their masses using precise radial velocities measured with the CARMENES spectrograph. Precise stellar parameters determined from CARMENES high-resolution spectra confirm that LTT 3780 is a mid-M dwarf with an effective temperature of T(eff) = 3360 ± 51 K, a surface gravity of log g⋆ = 4.81 ± 0.04 (cgs), and an iron abundance of [Fe/H] = 0.09 ± 0.16 dex, with an inferred mass of M⋆ = 0.379 ± 0.016M⊙ and a radius of R⋆ = 0.382 ± 0.012R⊙. The ultra-short-period planet LTT 3780 b (P(b) = 0.77 d) with a radius of 1.35(−0.06,+0.06) R⊕, a mass of 2.34(−0.23,+0.24) M⊕, and a bulk density of 5.24(−0.81,+0.94) g/cu.cm joins the population of Earth-size planets with rocky, terrestrial composition. The outer planet, LTT 3780 c, with an orbital period of 12.25 d, radius of 2.42(−0.10,+0.10) R⊕, mass of 6.29(−0.61,+0.63) M⊕, and mean density of 2.45(−0.37,+0.44) g/cu.cm belongs to the population of dense sub-Neptunes. With the two planets located on opposite sides of the radius gap, this planetary system is an excellent target for testing planetary formation, evolution, and atmospheric models. In particular, LTT 3780 c is an ideal object for atmospheric studies with the James Webb Space Telescope (JWST).
We present the discovery of two new 10 day period giant planets from the Transiting Exoplanet Survey Satellite mission, whose masses were precisely determined using a wide diversity of ground-based facilities. TOI-481 b and TOI-892 b have similar radii (0.99 ± 0.01 R(J) and 1.07 ± 0.02 R(J), respectively), and orbital periods (10.3311 days and 10.6266 days, respectively), but significantly different masses (1.53 ± 0.03 M(J) versus 0.95 ± 0.07 M(J), respectively). Both planets orbit metal-rich stars ([Fe/HG] = +0.26 ± 0.05 dex and [Fe/H] = +0.24 ± 0.05 for TOI-481 and TOI-892, respectively) but at different evolutionary stages. TOI-481 is a M(*) = 1.14 ± 0.02 Mꙩ, R(*) = 1.66 ± 0.02 Rꙩ G-type star (T(eff) = 5735 ± 72 K), that with an age of 6.7 Gyr, is in the turn-off point of the main sequence. TOI-892 on the other hand, is a F-type dwarf star (T(eff) = 6261 ± 80 K), which has a mass of M(*) = 1.28 ± 0.03 Mꙩ and a radius of R(*) = 1.39 ± 0.02 Rꙩ. TOI-481 b and TOI-892 b join the scarcely populated region of transiting gas giants with orbital periods longer than 10 days, which is important to constrain theories of the formation and structure of hot Jupiters.
Super-Earths belong to a class of planet not found in the Solar system, but which appear common in the Galaxy. Given that some super-Earths are rocky, while others retain substantial atmospheres, their study can provide clues as to the formation of both rocky and gaseous planets, and – in particular – they can help to constrain the role of photoevaporation in sculpting the exoplanet population. GJ 9827 is a system already known to host three super-Earths with orbital periods of 1.2, 3.6, and 6.2 d. Here, we use new HARPS-N radial velocity measurements, together with previously published radial velocities, to better constrain the properties of the GJ 9827 planets. Our analysis cannot place a strong constraint on the mass of GJ 9827 c, but does indicate that GJ 9827 b is rocky with a composition that is probably similar to that of the Earth, while GJ 9827 d almost certainly retains a volatile envelope. Therefore, GJ 9827 hosts planets on either side of the radius gap that appears to divide super-Earths into pre-dominantly rocky ones that have radii below ∼1.5Rꚛ, and ones that still retain a substantial atmosphere and/or volatile components, and have radii above ∼2Rꚛ. That the less heavily irradiated of the three planets still retains an atmosphere, may indicate that photoevaporation has played a key role in the evolution of the planets in this system.
The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions which NASA is studying. Its goal is to directly image and spectroscopically characterize planets in the habitable zone around nearby sun-like stars. Additionally, HabEx would perform a broad range of general astrophysics science enabled by 115 to 1700 nm spectral range and 3x3 arc-minute FOV instruments. Critical to achieving its science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes how science driven systems engineering (using science requirements to derive engineering specifications) resulting in the opto-mechanical design of the HabEx baseline optical telescope assembly. And, how Structural Thermal Optical Performance (STOP) modeling predicts tolerance compliance.
HabEx is one of 4 possible NASA flagship mission concepts studied for a possible launch in the 2030s. It will be optimized for direct imaging and spectroscopy of habitable exoplanets, and will also enable a wide range of general astrophysics observations. HabEx shall characterize full planetary systems around nearby solar-type stars for the first time, including rocky planets, possible water worlds, gas giants, ice giants, and faint circumstellar debris disks. It will in particular explore our nearest neighbor planetary systems and search for signs of habitability and bio-signatures in the atmospheres of rocky planets. Such high spatial resolution high contrast observations require a large (~3.5 to 8m) stable diffraction- limited optical space telescope, which also opens new unique capabilities for studying the formation and evolution of stars and galaxies. We present here some preliminary science objectives identified for HabEx by our Science and Technology Definition Team (STDT), together with a first look at the key challenges and design trades ahead.
The Habitable Exoplanet Observatory (HabEx), was one of four candidate flagship missions studied in detail by NASA, which were submitted for consideration to the 2020 Decadal Survey in Astronomy and Astrophysics for possible launch in the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable spacebased telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx was designed to be the Great Observatory of the 2030s and beyond, with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR.