On the design of optimal linear systems using only output-variable feedback.
Optimal control of linear systems with state variables generated by linear feedback from output variables, considering time variance
Athans, M.↗
SEARCH · Search NASA
Results for “feedback linearization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Convolution feedback systems.
Linear time-invariant feedback systems with multiple inputs and multiple outputs are examined. It is demonstrated that no loss of generality takes place considering the feedback to be unity. Necessary and sufficient conditions are derived for the closed-loop impulse response to be stable in a prescribed sense.
Desoer, C. A.↗
Computation of optimal output-feedback compensators for linear time-invariant systems
The control of linear time-invariant systems with respect to a quadratic performance criterion was considered, subject to the constraint that the control vector be a constant linear transformation of the output vector. The optimal feedback matrix, f*, was selected to optimize the expected performance, given the covariance of the initial state. It is first shown that the expected performance criterion can be expressed as the ratio of two multinomials in the element of f. This expression provides the basis for a feasible method of determining f* in the case of single-input single-output systems. A number of iterative algorithms are then proposed for the calculation of f* for multiple input-output systems. For two of these, monotone convergence is proved, but they involve the solution of nonlinear matrix equations at each iteration. Another is proposed involving the solution of Lyapunov equations at each iteration, and the gradual increase of the magnitude of a penalty function. Experience with this algorithm will be needed to determine whether or not it does, indeed, possess desirable convergence properties, and whether it can be used to determine the globally optimal f*.
Platzman, L. K.↗
Design of optimal partial state feedback controllers for linear systems in stochastic environments
The problem of obtaining an optimal control law, which is constrained to be a feedback of the available measurements, is considered for both continuous and discrete time linear systems subjected to additive white process noise and measurement noise. Necessary conditions are obtained for minimizing a quadratic performance function for both finite and infinite duration cases. The feedback gain matrices are constrained to be constant for the infinite duration cases. For all the cases considered, algorithms are derived for generating sequences of feedback gain matrices which successively improve the performance function. Computational aspects are discussed via application to two continuous time processes, including a helicopter/slung load system subjected to measurement noise and random wind gust input.
Joshi, S. M.↗
A graphical test for checking the stability of a linear time-invariant feedback system.
A continuous-time scalar linear time-invariant feedback system is considered for the purpose of checking Willems' (1969, 1970) graphical test for a scalar linear time-invariant feedback system with constant feedback. Heavy reliance is placed on the theory of almost periodic functions. Following definition of the problem and layout of notation, attention is given to solution of the problem, considering only the almost periodic part of the open-loop transfer function.
Callier, F. M.↗
RKH space approximations for the feedback operator in a linear hereditary control system
Computational implementation of feedback control laws for linear hereditary systems requires the approximation of infinite dimensional feedback operators with finite dimensional operators. The dense subspaces of K-polygonal functions in reproducing kernel Hilbert spaces, RKH spaces, suggest finite dimensional approximations of the matrix representations of the control operators. A convergence theorem is developed for the approximations and the numerical implementation of the approximations is discussed.
Reneke, J. A.↗
Equilibrium feedback control in linear games with quadratic costs
Equilibrium strategies for linear games with quadratic costs in Hilbert space, deriving nonlinear equation in allowed operator feedback spaces
Lukes, D. L.↗
Linear sawtooth voltage-wave generator employing transistor timing circuit having capacitor-zener diode combination feedback Patent
Linear sawtooth voltage wave generator with transistor timing circuit having capacitor and zener diode feedback loops
Green, E. D.↗
Output feedback non-linear decoupled control synthesis and observer design for manoeuvring aircraft
A study of the applicability of nonlinear decoupling theory to the design of control systems using output feedback for maneuvering aircraft is presented. The response variables chosen for decoupled control were angular velocity components along roll, pitch, and yaw axes, angle of attack (p), and angle of sideslip, using aileron, rudder, and elevator controls. An observer design for a class of nonlinear systems was presented and this method was used to estimate angle of attack and sideslip; an approximate observer was obtained by neglecting derivatives of p and aileron deflection angles and it was used in a simulation study. A simulation study showed that precise rapid combined lateral and longitudinal maneuvers can be performed; it was also demonstrated that a bank-angle-command outer loop could be designed for precise bank angles changes and simultaneous large lift maneuvers.
Singh, S. N.↗
Optimal limited state variable feedback controllers for linear systems.
Optimized static and dynamic linear system compensator designs with a priori fixed dimensions are discussed. Expressions are derived to determine the parameters of these designs, including the fixed-gain output feedback, the time-varying output feedback, and time-invariant compensation. A relevant deterministic off-line optimization problem is formulated, and the properties of a solution to the problem are analyzed. A unified design philosophy for limited state-variable control problems of essentially deterministic systems is developed. The philosophy incorporates design constraints, a careful selection of performance criteria, and interpretation of the results.
Levine, W. S.↗
On the design of linear systems with piecewise- constant feedback gains.
Computational algorithm for determining piecewise-constant feedback gains for linear system optimal control
Athans, M.↗
Feedback invariants for linear systems defined over rings
A coefficient-assignability theorem is presented for systems defined over a commutative ring with 1. The conditions examined include all the general results on coefficient-assignability available in the literature. It is concluded that the proposed techniques are not effective for the case of the weaker property of pole placement when it is assumed that the commutative ring is a PID. Morse's well-known theorem seems to be the best result available for this situation.
Byrnes, C. I.↗
Stabilization and robustness of non-linear unity-feedback system - Factorization approach
The paper is a self-contained discussion of a right factorization approach in the stability analysis of the nonlinear continuous-time or discrete-time, time-invariant or time-varying, well-posed unity-feedback system S1(P, C). It is shown that a well-posed stable feedback system S1(P, C) implies that P and C have right factorizations. In the case where C is stable, P has a normalized right-coprime factorization. The factorization approach is used in stabilization and simultaneous stabilization results.
Desoer, C. A.↗
Synthesis procedure for linear time-varying feedback systems with large parameter ignorance
The development of synthesis procedures for linear time-varying feedback systems is considered. It is assumed that the plant can be described by linear differential equations with time-varying coefficients; however, ignorance is associated with the plant in that only the range of the time-variations are known instead of exact functional relationships. As a result of this plant ignorance the use of time-varying compensation is ineffective so that only time-invariant compensation is employed. In addition, there is a noise source at the plant output which feeds noise through the feedback elements to the plant input. Because of this noise source the gain of the feedback elements must be as small as possible. No attempt is made to develop a stability criterion for time-varying systems in this work.
Mcdonald, T. E., Jr.↗
A comparative study of linear and nonlinear MIMO feedback configurations
In this paper, a comparison is conducted of several feedback configurations which have appeared in the literature (e.g. unity-feedback, model-reference, etc.). The linear time-invariant multi-input multi-output case is considered. For each configuration, the stability conditions are specified, the relation between achievable I/O maps and the achievable disturbance-to-output maps is examined, and the effect of various subsystem perturbations on the system performance is studied. In terms of these considerations, it is demonstrated that one of the configurations considered is better than all the others. The results are then extended to the nonlinear multi-input multi-output case.
Desoer, C. A.↗
An approach to sub-optimal feedback control of non-linear systems.
Nonlinear system suboptimal feedback control technique based on method for determining approximate solutions for Hamilton-Jacobi- Bellman equation
OPTIMAL CONTROL↗
Application of Design Methodologies for Feedback Compensation Associated with Linear Systems
The work that follows is concerned with the application of design methodologies for feedback compensation associated with linear systems. In general, the intent is to provide a well behaved closed loop system in terms of stability and robustness (internal signals remain bounded with a certain amount of uncertainty) and simultaneously achieve an acceptable level of performance. The approach here has been to convert the closed loop system and control synthesis problem into the interpolation setting. The interpolation formulation then serves as our mathematical representation of the design process. Lifting techniques have been used to solve the corresponding interpolation and control synthesis problems. Several applications using this multiobjective design methodology have been included to show the effectiveness of these techniques. In particular, the mixed H 2-H performance criteria with algorithm has been used on several examples including an F-18 HARV (High Angle of Attack Research Vehicle) for sensitivity performance.
Smith, Monty J.↗
Linear systems with structure group and their feedback invariants
A general method described by Hermann and Martin (1976) for the study of the feedback invariants of linear systems is considered. It is shown that this method, which makes use of ideas of topology and algebraic geometry, is very useful in the investigation of feedback problems for which the classical methods are not suitable. The transfer function as a curve in the Grassmanian is examined. The general concepts studied in the context of specific systems and applications are organized in terms of the theory of Lie groups and algebraic geometry. Attention is given to linear systems which have a structure group, linear mechanical systems, and feedback invariants. The investigation shows that Lie group techniques are powerful and useful tools for analysis of the feedback structure of linear systems.
Martin, C.↗