Search NASA⌕ Search

SEARCH · Search NASA

Results for “final technical report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Microwave and rf Spectroscopy of 2D Carrier Systems and Bilayers (Final Technical Report)

We performed microwave spectroscopic studies of two dimensional electron systems (2DES) exhibiting the quantum Hall effect (QHE) in GaAs/Al${_x}$Ga$_{1-x}$As heterostructures. A common theme of the proposed work is electron solids, of which the simplest is the Wigner crystal, a triangular lattice of individual carriers. The solids are stabilized by carrier-carrier interaction and occur under conditions when the kinetic energy of the system is "frozen out" by high magnetic field, $B$. One of the main reasons for microwave spectroscopic study of 2DES is that the solid phases have striking microwave or rf spectra. In the low wave vector ($q$) limit these spectra exhibit a resonance that is understood as a pinning mode, a small collective oscillation of pieces of the solid within the disorder potential. Pinning modes can be very sharp, with quality factors up to around 30, and are valuable as signatures of the electron solids, and can reveal a solid even when standard dc transport shows an insulator, an integer QHE, or even a fractional QHE The pinning mode also is sensitive to the solid properties, and can reveal transitions between solids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

7th World Congress on Integrated Computational Materials Engineering (ICME 2023) (Final Technical Report)

Integrated Computational Materials Engineering (ICME) has received international attention due to its potential to shorten product development time, while lowering cost and improving design and manufacturing outcomes. ICME is an approach to designing materials solutions for specific applications that use computer modeling programs to predict the behavior of materials and integrate this information into the overall materials, processing, and manufacturing design cycle. The 7th World Congress on Integrated Computational Materials Engineering (ICME 2023) was held in Orlando, Florida from May 21–25, 2023 with the goal to convene stakeholders from across all areas of modeling and simulation, experimental specialization, and design, as well as from across academia, government, and industry, to address ICME tools and techniques and their integration, as well as to examine their application in engineering. This atmosphere facilitated rich interactions between the experimentalists, modelers, and computational and design, from academia, government, and industry, to discuss ICME tools and techniques and their application in engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Precision Computations in Strongly Coupled Conformal Field Theories (Final Technical Report)

Conformal Field Theories (CFTs) are quantum field theories that are invariant under the conformal symmetry group (which includes translations and rotations, but also local rescalings of spacetime). They are building blocks of general quantum field theories, and appear in many areas of physics, including statistical physics, condensed matter physics, particle physics, and quantum gravity. Because of their extra symmetries, the mathematical structure of CFTs is tightly constrained, and this leads to the idea of the ``conformal bootstrap," which is to use these mathematical structures to constrain, and in some cases determine, CFT observables. A new numerical implementation of the conformal bootstrap idea appeared in 2008 with the work of Rattazzi, Rychkov, Tonni, and Vichi. Their observation was that certain bootstrap constraints (conformal symmetry and unitarity) could be combined to yield a convex optimization problem that constraints CFT data. By solving this convex optimization problem on a computer, one could obtain bounds on observables like critical exponents and operator product expansion (OPE) coefficients. Over the course of this award, the PI has improved numerical bootstrap techniques by optimizing known algorithms and finding new ones for performing the required convex optimization computations. The PI has applied these techniques to compute high-precision observables in several important strongly-coupled systems. The PI has also explored both analytical and numerical bootstrap methods for constraining the space of low energy effective field theories of quantum gravity, and developed new analytical techniques for CFT and QFT more broadly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Concentrated solar thermal fuels production by electric field enhanced two step gas splitting (Final Technical Report)

Solar thermochemical CO 2 splitting (STCS) is plagued by high solar field costs due to the extraordinarily high temperatures (~1500 °C) required. In STCS, a reduction/oxidation active material, CeO 2 , is thermally reduced to CeO 2-δ generating O2 at ~1500 °C; then CeO 2-δ is re-oxidized by CO 2 to re-form CeO 2 and CO, a precursor to liquid fuels. Before this project, there were no known methods to decrease the reduction temperature while maintaining high conversion of the CO 2 to CO; thus, projected solar thermal CO costs had stagnated.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Metal Organic Frameworks for Noble Gas Isotope Harvesting at FRIB (Final Technical Report)

This project was a collaborative effort between Lawrence Livermore National Laboratory (LLNL) and Michigan State University (MSU) to investigate the use of promising metal organic frameworks (MOFs) for radioactive noble gas capture, with a focus on harvesting exotic radiokryptons from FRIB. After screening several candidate materials, two MOFs were selected for testing: SIFSIX-3Cu and SBMOF-1. Further evaluation showed that although SIFSIX-3Cu has a high selectivity for Kr, SBMOF-1 is less sensitive to the humidity that is present in the FRIB harvesting system and is more readily integrated into the harvesting infrastructure. SBMOF-1 was then evaluated for temperature-dependent Kr and Xe uptake in order to determine the sorption enthalpy. The SBMOF-1 data led to the design of a noble gas capture system that will be fabricated and put into service for isotope harvesting at FRIB as part of a separate project.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Direct Air Capture Recovery of Energy for CCUS Partnership (DAC RECO 2 UP) Final Technical Report

The “Direct Air Capture Recovery of Energy for CCUS Partnership (DAC RECO 2 UP)” project employs a team approach and supports the U.S. Department of Energy Office of Fossil Energy and Carbon Management’s (DOE-FECM) goal to decrease the cost of capture through the testing of existing direct air capture (DAC) materials in integrated field units that produce a concentrated carbon dioxide (CO 2 ) stream of at least 95% purity. Solid-amine CO 2 adsorption-desorption contactor technology, proven in the laboratory, is undergoing high-fidelity design/validation. Recoverable energy is readily available from a large number of commercial locations where DAC can be deployed; therefore, advancing the fidelity of energy recovery to directly reduce the cost of DAC is a key project objective. In addition, many commercial facilities have low-concentration CO 2 vents that are uneconomical to treat alone but could provide more efficient mass and thermal transport to DAC systems with integrated energy recovery and flexible CO 2 treatment capabilities. Technology scale-up leverages past research and occurs in a commercially relevant environment at the National Carbon Capture Center. Prescreening techno-economic analysis, risk assessments, and life cycle analysis are being performed by experienced team members. Results of the project will address critical technical barriers that, when solved, will improve the capital and operating costs of DAC while validating commercial relevance of cost and product quality/need.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Harnessing photoautotroph-methanotroph interactions for biogas conversion to fuels and chemicals using binary consortia (Project Final Technical Report)

Industrial, municipal, and agricultural waste streams containing stranded organic carbon represent a significant and underutilized feedstock to produce fuels and chemicals. With anaerobic digestion deployed at large scales to capture organic waste streams, over 6 million tons of biogas are available today. However, the utilization of biogas represents a significant challenge due to its low pressure and presence of contaminants such as H 2 S, ammonia, and volatile organic carbon compounds. To tap into this immense potential, effective biotechnologies that co-utilize both CO 2 and CH 4 are needed. Recent studies demonstrated that, in nature, microbial communities have developed a highly efficient way to recover energy and capture carbon from both CH 4 and CO 2 through metabolic coupling of methane oxidation to oxygenic photosynthesis. Using two synthetic methanotroph – photoautotroph (M-P) co-cultures that exhibit stable growth under a broad range of cultivation conditions, in this project we proposed to harness the interspecies interactions within these cocultures for biogas conversion to fuels and chemicals. To facilitate this overarching objective, we aim to develop experimental and computational tools to gain qualitative and quantitative understandings on the interactions and dynamics of the coculture at both systems and molecular levels, and to validate our findings through experiments and mutant development. The fundamental understanding on the interactions and dynamics of the photoautotroph-methanotroph will lay the foundation for the design and optimization of synthetic binary consortia for production of fuels and chemicals from biogas. We expect the knowledge gained from this project may be generally applicable to other cross-feeding binary consortium, and the tools developed can be adapted to study the interactions and dynamics of other multi-organism platforms.

09 BIOMASS FUELS↗
DOE OSTI2024

SolarAPP+ Performance Review: Final Technical Report

The National Renewable Energy Laboratory (NREL) and its project partners have developed the novel Solar Automated Permit Processing plus (SolarAPP+) software platform that provides a flexible, web-based PV-permitting tool for residential systems that can be integrated with existing and complementary software platforms. The main objective of this research is to analyze the implementation of SolarAPP+. Analysis was conducted by identifying the benefits, tradeoffs, and overall performance of SolarAPP+, including achieving its goals of delivering automated, code compliant systems, influencing permitting cycle times, and improving application submittals and/or inspection performance. The NREL team published the results of this analysis in annual SolarAPP+ Performance Review technical reports.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Final Technical Report - Rapid Surface Microanalysis using a Low Temperature Plasma

This project focused on improving our current understanding and scientific knowledge in the area of plasma-surface interactions and plasma assisted material synthesis related to advanced microelectronics and nanotechnology. Current challenges include: controlling the interaction of Low Temperature Plasma (LTP) with a single layer of atoms to manufacture integrated circuits, continued miniaturization of integrated circuits, LTP processing of material surfaces and thin films to enable industrial scale fabrication of advanced microelectronics, synthesis of new materials, nanomaterials, nanotubes, and complex materials, Technology developed in this subtopic is of value to either (i) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at high resolution (micron or sub-micron resolution) rapidly (hours or days rather than years to complete a high-resolution scan of such a large surface area), or (ii) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at relatively low resolution rapidly, then apply algorithms to select spots for micron-scale imaging. Sputtering occurs when particles of a solid material are ejected from its surface by energetic particles from a plasma. While the degradation of the solid material and the subsequent deposition of the ejected material onto vulnerable surfaces are the usual subjects of sputtering studies, plasma science has yet to be combined with sputtering to create new diagnostics devices and systems. Small changes in the design of the plasma discharge device make it possible to create broad plasma beams for rapid scanning or small plasma beams to obtain the distribution of ejected elements with micron resolution. In the high-resolution use, the ion flux is extracted from the gas-discharge plasma and focused by a spherical emission surface to micron sizes onto the target specimen, providing very local sputtering and local elemental analysis. We call this “self-focusing”. The radiation from the excited and ionized sputtered atoms is recorded by a spectrometer through a window and fiberglass cable and analyzed with standard software packages used for optical glow discharge spectroscopy. Computer simulations of beam formation were used to verify and optimize the designs to be tested. A prototype was designed, constructed, and used to start experiments of beam formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Final Technical Report

TOPOLOGY-DRIVEN QUANTUM AND THERMAL DYNAMICS OF LOW-DIMENSIONAL MAGNETIC AND SUPERCONDUCTING SYSTEMS

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unique optical excitations in topological insulators (Final Technical Report)

The overall objective of this research is to understand how light interacts with topological insulator (TI) films and layered structures. Unlike normal materials, the electrons in TI films are trapped at the top and bottom surfaces of the film. These electrons have unusual properties, including low mass and high velocity. Light shining on these trapped electrons will excite electron density waves, called plasmons, which inherit the unusual properties of the electrons. This project aims to understand how these plasmons interact with each other and how the plasmon properties change as the film dimensions change. By controlling the physical properties of the films, the optical response of the film can also be controlled. In addition to single TI films, the project will also investigate the properties of stacks of TI films layered with normal insulating films. Stacking these materials results in multiple layers of trapped electrons whose plasmons can interact in ever more complex ways. After these interactions are understood, we can begin to engineer complex TI structures to obtain designer optical phenomena in the far-infrared and THz, wavelength ranges of interest for environmental monitoring and chemical sensing. This research directly addresses DOE Grand Challenges, including understanding how properties of matter emerge from complex electronic correlations and learning how to control these properties as well as the mission of the Basic Energy Sciences program to understand and control matter at the electronic/atomic level.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Are Marine Low Cloud Droplet Concentrations Buffered by Entrained Aitken‐Mode Aerosol (Final Technical Report)

During the summertime, the high-latitude oceans come to life with green phytoplankton, which gain their energy from sunlight and are food for sea creatures small and large. When the phytoplankton are eaten or die, sulfur-rich gases are released under the ocean surface and mix into the air. Observations suggest that, over the Southern Ocean, frequent storms lift this air high into the atmosphere while raining out particulates like salt. As a result, the sulfur-rich air then spawns high concentrations of small ‘Aitken-mode’ aerosol particles. We hypothesize that these particles work their way down into the marine boundary layer, where they can replenish the supply of cloud-condensation nuclei scavenged by frequent precipitation. Further, this process maintains high concentrations of liquid cloud droplets in austral summer, promoting more sunlight to be reflected to space. We call this ‘Aitken buffering’. The primary objective of this project has been to document and test what role Aitken-mode aerosols play in clouds over the Southern Ocean and elsewhere. This effort has included three main components: 1) developing a computer model that realistically simulates the aerosol processes and the small-scale turbulent air motions that move aerosols around and create the clouds, 2) using that model to interpret and extend these observations for process understanding, by allowing different factors that contribute to the aerosol budget, such as surface wind speed, precipitation, surface gas exchange, etc. to be separated, and 3) studying Aitken-mode aerosol and its variability with a focus over the Southern Ocean and Antarctica, using data from Atmospheric Radiation Measurement (ARM) sites and other available observations. Initial computer studies in more idealized conditions found that elevated concentrations of Aitken-mode aerosols above the clouds could help prevent the breakup of those clouds by acting as cloud-condensation nuclei after they were entrained into the cloudy boundary layer. Simulations of a day during the ACE-ENA field campaign showed that Aitken-mode aerosols could also prevent cloud breakup under more realistic conditions. A new method that extracts information about Aitken-mode aerosols from measurements of aerosols onto which cloud droplets can form finds that Aitken-mode aerosols do vary seasonally over the Southern Ocean, with a peak in summertime, as described above. Other work during this project has focused on understanding how patterns of water vapor, clouds and precipitation are coupled within low-lying clouds over the oceans, and also on how cloud droplets cluster within clouds and how the distribution of cloud droplet sizes change as dry air is mixed into clouds, with the latter studies also using observations from ACE-ENA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Carbonate Management to Enable Energy- and Carbon-Efficient CO 2 Electrolysis (Final Technical Report)

The rapid growth and plummeting cost of solar energy have created great interest in using CO 2 electrolysis to produce chemical feedstocks and fuels such as carbon monoxide, ethylene, ethanol, and propanol. While research in CO 2 electrolysis has yielded substantial progress in both fundamental understanding of the requisite electrocatalytic reactions and design of prototype devices, the energy efficiency (electrical energy to-product) and carbon efficiency (CO 2 -to-product) of CO 2 electrolysis remain far too low for large-scale deployment. A preponderance of evidence indicates that the principal reason for these low efficiencies is the rapid and thermodynamically favorable reaction of CO 2 with hydroxide (OH–) to form carbonate , which forces CO 2 electrolysis cells to operate under conditions that result in large voltage and CO 2 losses. This “CO 3 2 – problem” presents a fundamental scientific barrier to creating a viable electrochemical option for converting solar energy into chemicals and fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Resilient Energy Delivery and Control Systems (REDCS) (Final Technical Report)

US critical infrastructure is increasingly the target of cyberattacks, where disturbances could cause considerable damage and disruption. To help provide a new layer of cyber-physical protection for one key energy delivery system, natural gas pipelines, GE Vernova Advanced Research along with partners Florida State University and Intel Corporation created an innovative technology called "Resilient Energy Delivery and Control Systems" (REDCS). This cybersecurity package helps detect anomalies caused by cyberattacks, isolate the subsystem being impacted by the attack, and provide functions that can allow for resiliency – giving better situational awareness to the operators and cybersecurity specialists or in the future perform closed loop control for continued operation while compromised.

03 NATURAL GAS↗
DOE OSTI2024

Manufacturing and Additive Design of Electric Machines by 3D Printing (MADE3D) (Final Technical Report)

As the U.S clean energy transition hinges on the growth of offshore wind, this is expected to be a major driver for innovations in manufacturing, material and design advancements to enable robust and cost-competitive wind turbines. The race to build larger and taller turbines rated 10 megawatts (MW) and beyond, has intensified pressure on OEMs in terms of logistics of handling and transporting large wind components, securing critical raw material as well as scaling up necessary domestic production infrastructure to meet the demand. There is increased interest in building lightweight, more efficient, and high-power dense drivetrains that will ease the burden on installation, minimize the raw material demand, increasing domestic sourceability. Despite good efficiency and reliability, existing drivetrain technologies such as direct-drive permanent magnet generators are heavy (> 300 tons), expensive, and often rely on large quantities of rare-earth permanent magnets (PMs), steel and copper.

17 WIND ENERGY↗
DOE OSTI2024

Orienting Strained Interfaces designed to Direct Energy Flow (Final Technical Report)

This proposal aims to establish a transformative paradigm for oxide heterostructures with an exceptionally large number of interfaces designed to direct energy flow through controlled interface orientation, enabling fast ion transport. A primary focus is on unveiling the key role of interfacial strain in oxygen ion migration at low temperatures. The central challenge is to create, understand, utilize self-assembled vertical heteroepitaxial nanostructures with the goal of obtaining and understanding fast ion transport properties by modulating interfacial strain. The specific objectives are: (1) to synthesize multilayer thin films and vertical heteroepitaxial nanostructures with fluorite Gd-doped CeO 2 (GDC) and bixbyite RE 2 O 3 (RE = Y and Sm), (2) to evaluate the interfacial strain states under various temperatures and ambient conditions, (3) to understand the effect of interfacial strain on ionic conductivity of the proposed nanostructures, (4) to understand the three-dimensional (3D) atomic structure of the proposed material design and interface phenomena at the atomic scale.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Freezing Processes in Southern Ocean Mixed Phase Clouds (Final Technical Report)

Southern Ocean (SO) low-level clouds remain a challenge for Earth system models to represent accurately. This project utilized DOE ARM observations and the Community Atmosphere Model (CAM) to improve process-level understanding of aerosol-cloud interactions and cloud microphysics for SO mixed-phase clouds. Specifically, our efforts include two main topics: 1) investigate the SO aerosol, cloud condensation nuclei (CCN), and ice nucleating particle (INP) population based on observations and determine predictive skill of simulating SO INPs, and 2) assess the ice formation pathways, including ice nucleation and secondary ice production, in SO mixed phase clouds utilizing a combination of observations and modeling tools. Studies focused on SO aerosol and INP resulted four manuscripts. Ice formation pathways in SO mixed phase clouds were investigated, revealing observed evidence of SIP active across all mixed phase temperatures. However, a key finding of this project is that despite significant progress in predicting SO INPs, the role of INP variability in SO cloud phase, precipitation, and radiative properties remain unknown due to challenges in microphysics parameterizations.

54 ENVIRONMENTAL SCIENCES↗