Search NASA⌕ Search

SEARCH · Search NASA

Results for “financial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Impact of Aerosol and Cloud on the Solar Energy Potential over the Central Gangetic Himalayan Region

We examine the impact of atmospheric aerosols and clouds on the surface solar radiation and solar energy at Nainital, a high-altitude remote location in the central Gangetic Himalayan region (CGHR). For this purpose, we exploited the synergy of remote-sensed data in terms of ground-based AERONET Sun Photometer and satellite observations from the MODerate Resolution Imaging Spectroradiometer (MODIS) and the Meteosat Second Generation (MSG), with radiative transfer model (RTM) simulations and 1 day forecasts from the Copernicus Atmosphere Monitoring Service (CAMS). Clouds and aerosols are one of the most common sources of solar irradiance attenuation and hence causing performance issues in the photovoltaic (PV) and concentrated solar power (CSP) plant installations. The outputs of RTM results presented with high accuracy under clear, cloudy sky and dust conditions for global horizontal (GHI) and beam horizontal irradiance (BHI). On an annual basis the total aerosol attenuation was found to be up to 105 kWh m –2 for the GHI and 266 kWh m –2 for BHI, respectively, while the cloud effect is much stronger with an attenuation of 245 and 271 kWh m –2 on GHI and BHI. The results of this study will support the Indian solar energy producers and electricity handling entities in order to quantify the energy and financial losses due to cloud and aerosol presence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

System Advisor Model (SAM) [Slides]

The System Advisor Model (SAM) is a free software that enables detailed performance and financial analysis for energy systems. • Conducts technoeconomic analysis of energy technologies to facilitate planning and decision making.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Personal Resiliency Index

A plethora of information exists in literature focusing on different aspects of personal resilience. There are a number of questionnaires available to measure resilience in different aspects of an individual’s life, such as mental health. However, there is a lack of comprehensive information on the subject of personal resilience to natural and man-made disasters. A Personal Resiliency Index identifying four key areas of resilience related to natural and man-made disasters will help fill this gap by providing individuals an idea of where the stand comparatively to their peers on this topics. As an increasing amount of man-made disasters, natural disasters and pandemics occur, we realize that preparation is key.?“Crisis can be experienced at individual, group and mass levels and at local, regional, national or supra-national levels.” 1? Dr. Ron Fisher, the principal investigator has over 20 years’ critical infrastructure protection including developing vulnerability assessment methodology, risk and resiliency analyses and infrastructure interdependencies. Dr. Fisher and his team will research and develop a voluntary survey which evaluates the user’s personal resilience level to natural and man-made disasters. The research team is focusing on 4 main categories:? financial resilience, cyber security, physical and mental health, and emergency preparedness.?The web based application will?provide a resilience score for each of the categories and also a comprehensive personal resiliency score based on the voluntary survey. The application will also provide feedback to the user on actions to take to become more resilient to natural and man-made disasters. Through this effort, we will also be able to identify the areas where participants are excelling as well as opportunities for improvement in terms of resilience. This information will provide insight into areas of further investigation and identify potential areas of support needed for the general public to adopt strategies to become more resilient. 1 Lynott, William. “Surviving a Natural (or Man-Made) Disaster: How to Prepare for and Bounce Back? from a Crisis in Your Business | 2018-02-01 | NOLN.” Home Page, NOLN, 1 Feb. 2018, https://www.noln.net/articles/2683-surviving-a-natural-or-man-made-disaster-how-to-prepare-for-and-bounce-back-from-a-crisis-in-your-business.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Panel Session 133: Integrating Economic Redevelopment and Workforce Transition Into DOE Site Closure Planning (R1.18)

This panel focused on post-closure impacts to the long-term site workforce and communities in DoE's approach to accelerated site cleanup and expedited reduction of long-term financial liabilities. At sites where Cold-War workers shifted from weapons production to the cleanup effort, a more holistic approach to the workforce transition Post-EM cleanup is needed. This holistic approach would include incentives for expedited closure, trade re-training, and a vision for future site commercial activities. The panel discussed the importance of the right workforce incentives that includes appropriate training for displaced workers so that they can be integrated into a next job. A key aspect of this discussion was to re-assess the current and future land use opportunities related to land re-use concepts. By re-arranging cleanup sequencing is it possible to divest land sooner than originally projected for productive commercial use hence reducing the DOE long-term liability and consequently increasing an economic soft landing for those Cold-War workers. Panelists with presentations: Integrating Economic Redevelopment and Workforce Transition Into DOE Site Closure Planning (Sean Todd); Sustaining, Growing and Re-Developing DOD/DOD Facilities and Assets (Jonathan Taylor)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Comparison of Quinone-Based Catholytes for Aqueous Redox Flow Batteries and Demonstration of Long-Term Stability with Tetrasubstituted Quinones

Quinones are appealing targets as organic electrolytes for aqueous redox flow batteries (RFBs), but their utility continues to be constrained by limited stability under operating conditions. The present study evaluates the stability of a series water-soluble quinones, with redox potentials ranging from 605–885 mV vs. NHE, under acidic aqueous conditions (1 M H2SO4). Four of the quinones are examined as cathodic electrolytes in an aqueous RFB, paired with anthraquinone-2,7-disulfonate (AQDS) as the anodic electrolyte. The RFB data complement the solution stability measures and show that the most stable electrolyte is a tetrasubstituted quinone containing four sulfonated thioether substituents. The results highlight the importance of substituting all C–H positions of the quinone in order to maximize the quinone stability and set the stage for design of improve organic electrolytes for aqueous RFBs. The authors thank Joseph Fourie for assisting in the synthesis of compound 8. Financial support for this work was provided by the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences (SSS, TWR, JBG, CWA, YP), with supplemental contributions by the Wisconsin Alumni Research Foundation (WARF) through the WARF Accelerator Program (YQ and partial support for JBG, CWA, YP). NMR spectroscopy facilities were partially supported by the NSF (CHE-0342998 and CHE-1048642), a UW Madison Instructional Laboratory Modernization Award, and a gift from Paul J. and Margaret M. Bender.

aqueous flow batteries, quinones, organic, redox m↗
DOE OSTI2022

Techno‐economic, environmental, and social measurement of clean energy technology supply chains

Abstract In addition to the criteria of reliability and cost, clean energy technologies, such as wind, solar, and batteries, need to strive to a higher standard of environmental and societal benefit along their entire supply chain. This means additional performance metrics for these technologies should be considered, such as embodied energy, embodied carbon, recycled content and recyclability, environmental impact of material sourcing, impact on land and ecosystems, materials recovery at end of life, and production through quality nonexploitive jobs with community benefit. Many commercial and emerging energy technologies have not yet been explicitly evaluated based on these environmental and social performance metrics, which presents multiple opportunities for researchers and analysts. In this paper, we review the importance and current limitations of techno‐economic and life‐cycle assessment models for research design and manufacturing decisions. We explore emerging manufacturing modeling options that could improve environmental and social performance and how they could be used to help guide research. Even with the deployment of low‐carbon energy‐generation technologies, the future of a successful clean energy transition requires collaboration between researchers, advanced manufacturers, independent standards and tracking organizations, local communities, and national governments, to ensure the financial, environmental, and social sustainability of the entire supply and manufacturing process of energy technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Adoption of biofuels for marine shipping decarbonization: A long‐term price and scalability assessment

Abstract This study assessed the long‐term annual biofuel production capacity potential and price in the United States and shed light on the prospect of biofuel adoption for marine propulsion. A linear programming model was developed to assist the projections and provide insightful analyses. The projected long‐term (2040) maximum annual capacity of biofuels in the United States is 245 million metric tons (Mt) or 65 billion gallons of heavy fuel oil gallon equivalent (HFOGE) when based on the median feedstock availability. Between 2022 (near‐term) and 2040, the potential biofuel capacity increases by over 40%, attributed to increased feedstock availability. At a price range up to $500/t, biodiesel is the main product, and the annual capacity (12 Mt) is limited to feedstock availability constraints. Biodiesel and corn ethanol are the main biofuels at a price range up to $750/t. At a higher price point (above $750/t), the biofuel types and annual capacities increase substantially (218 Mt per year). Biofuels above this price include gasoline‐, jet‐, and diesel‐range blendstocks, as well as bio‐methanol, bio‐propane, and biogas. This study concludes that the US domestic feedstock availability coupled with advanced conversion technologies can produce substantial amounts of biofuels to achieve a critical mass and be impactful as alternative marine fuels. There is also a need to improve the biofuel price for marine shipping adoption. Policies and economic incentives that provide temporary financial support would help facilitate maritime biofuel adoption. © 2022 Alliance for Sustainable Energy, LLC. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2020

Measuring success for a future vision: Defining impact in science gateways/virtual research environments

Scholars worldwide leverage science gateways/virtual research environments (VREs) for a wide variety of research and education endeavors spanning diverse scientific fields. Evaluating the value of a given science gateway/VRE to its constituent community is critical in obtaining the financial and human resources necessary to sustain operations and increase adoption in the user community. In this article, we feature a variety of exemplar science gateways/VREs and detail how they define impact in terms of, for example, their purpose, operation principles, and size of user base. Further, the exemplars recognize that their science gateways/VREs will continuously evolve with technological advancements and standards in cloud computing platforms, web service architectures, data management tools and cybersecurity. We also present a number of technology advances that could be incorporated in next-generation science gateways/VREs to enhance their scope and scale of their operations for greater success/impact. The exemplars are selected from owners of science gateways in the Science Gateways Community Institute (SGCI) clientele in the United States, and from the owners of VREs in the International Virtual Research Environment Interest Group (VRE-IG) of the Research Data Alliance. Thus, community-driven best practices and technology advances are compiled from diverse expert groups with an international perspective to envisage futuristic science gateway/VRE innovations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Raccoon densities across four land cover types in the southeastern United States

Raccoons (Procyon lotor) are the primary reservoir for rabies virus in eastern North America. Management of rabies in raccoons is achieved primarily with the use of oral rabies vaccination (ORV) and effective ORV bait densities are determined in part by the densities of raccoons. Decisions regarding ORV bait densities, however, are limited by an incomplete understanding of raccoon densities across the spectrum of landscapes they occupy. We carried out a mark-recapture study of raccoons on the Savannah River Site in South Carolina, USA, from 2017–2019, to develop sex- and landscape-specific raccoon density estimates across 4 rural land cover types in the southeastern United States: bottomland hardwood, riparian forest, isolated wetland, and upland pine (Pinus spp.). We captured 404 unique raccoons 773 times over the 3-year trapping period. Estimated densities were 5.44 ± 0.37 (SE) animals/km 2 in bottomland hardwood forest, 2.62 ± 0.32 animals/km 2 in riparian forest, 2.19 ± 0.29 animals/km 2 in isolated wetlands, and 2.14 ± 0.23 animals/km 2 in upland pine. Densities were significantly higher in bottomland hardwood than all other land cover types, whereas densities among the remaining cover types were similar. These patterns are likely the result of landscape fragmentation and configuration, with riparian forests typically embedded in a matrix of less suitable cover types, leading to low densities despite presumably high resource availability. There were higher densities of males than females in every cover type except upland pine, where the sex ratio was balanced. Densities on our site were low compared to other rural areas, which likely results from the lack of human influence in terms of agriculture or development. The financial cost of baiting for ORV distribution may be reduced by considering the comparatively low densities of raccoons in these rural landscapes in the southeastern United States.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Artificial ground reflector size and position effects on energy yield and economics of single‐axis‐tracked bifacial photovoltaics

Abstract Artificial ground reflectors improve bifacial energy yield by increasing both front and rear‐incident irradiance. Studies have demonstrated an increase in energy yield due to the addition of artificial reflectors; however, they have not addressed the effect of varying reflector dimensions and placement on system performance and the impact of these parameters on the reflectors' financial viability. We studied the effect of high albedo (70% reflective) artificial reflectors on single‐axis‐tracked bifacial photovoltaic systems through ray‐trace modeling and field measurements. In the field, we tested a range of reflector configurations by varying reflector size and placement and demonstrated that reflectors increased daily energy yield up to 6.2% relative to natural albedo for PERC modules. To confirm the accuracy of our model, we compared modeled and measured power and found a root mean square error (RMSE) of 5.4% on an hourly basis. We modeled a typical meteorological year in Golden, Colorado, to demonstrate the effects of artificial reflectors under a wide range of operating conditions. Seventy percent reflective material can increase total incident irradiance by 1.9%–8.6% and total energy yield by 0.9%–4.5% annually after clipping is considered with a DC–AC ratio of 1.2. Clipping has a significant effect on reflector impact and must be included when assessing reflector viability because it reduces reflector energy gain. We calculated a maximum viable cost for these improvements of up to $2.50–4.60/m 2 , including both material and installation, in Golden. We expanded our analysis to cover a latitude range of 32–48°N and demonstrated that higher‐latitude installations with lower energy yield and higher diffuse irradiance content can support higher reflector costs. In both modeling and field tests, and for all locations, the ideal placement of the reflectors was found to be directly underneath the module due to the optimized rear irradiance increase.

14 SOLAR ENERGY↗
DOE OSTI2023

Photovoltaic Deployment Scenarios toward Global Decarbonization: Role of Disruptive Technologies

To totally decarbonize global electrical systems using photovoltaics (PVs) in the 2050–2060 decade, the world would need to install 63.4 TW of PV. This article models and explores how a PV manufacturing ramp‐up trajectory toward this goal can be achieved while assuming that investors continue to make financially rational decisions avoiding stranded production assets and therefore protecting their return on investment. The model effectively exploits experience curve benefits in both the scaling of the manufacturing process and continued progress in product design technologies. The scale‐up challenge is amplified because trajectories that achieve this goal require an unprecedented ramp‐up of production capacity over just two decades, followed by relatively modest demand to maintain the installed base and support continued population growth. It is demonstrated that sustainable ramp‐up of manufacturing is indeed possible and shown that the deployment of the requisite manufacturing capacity can be accelerated and accomplished at lower total capital cost by the introduction of disruptive technologies that have lower capital intensity, embedded energy, or higher efficiency.

14 SOLAR ENERGY↗
DOE OSTI2022

National-scale impacts on wind energy production under curtailment scenarios to reduce bat fatalities

Wind energy often plays a major role in meeting renewable energy policy objectives; however, increased deployment can raise concerns regarding the impacts of wind plants on certain wildlife. Particularly, estimates suggest hundreds of thousands of bat fatalities occur annually at wind plants across North America, with potential implications for the viability of several bat species. One approach to reducing bat fatalities is shutting down (or curtailing) turbines when bats are most at risk, such as at night during relatively low wind speed periods throughout summer and early autumn. While curtailment has consistently been shown to reduce bat fatalities, the lost power production reduces revenues for wind plants. This study conducted simulations with a range of curtailment scenarios across the contiguous United States to examine sensitivities of annual energy production (AEP) loss and potential impacts on economic metrics for future wind energy deployment. We found that AEP reduction can vary across the country from less than 1% to more than 10% for different curtailment scenarios. From an estimated 2891 gigawatts (GW) of simulated economically viable wind capacity (measured by a positive net present value), we found the mid curtailment scenario (6.0 m/s wind speed cut-in from July 1 through October 31) reduced the quantity of economic wind capacity by 274 GW or 9.5%. Our results indicate that high levels of curtailment could substantially reduce the future footprint of financially viable wind energy. In this context, future work that illuminates cost-effective strategies to minimize curtailment while reducing bat fatalities would be of value.

17 WIND ENERGY↗
DOE OSTI2025

Security Assessment of an LBP16-Protocol-Based Computer Numerical Control Machine

Subtractive manufacturing systems, specifically, computer numerical control machines, have revolutionized the manufacturing industry. Computer numerical control machining is the preferred method for producing finished parts due to its efficiency, speed and suitability for high-volume production. Securing computer numerical control machines is a priority. Compromises or disruptions of these machines can result in significant downtime, loss of productivity and financial loss. This study examines the vulnerabilities and risks associated with computer numerical control machines, in particular, systems utilizing the LBP16 protocol for controller-machine communications. The study reveals that an adversary can execute cyber-physical attacks such as sabotage and denial of service. The potential security threats emphasize the importance of implementing robust security measures to mitigate the cyber risks to computer numerical control machines.

Forihat, Yahya [Virginia Commonwealth University, ↗
DOE OSTI2021

Explaining and predicting human behavior and social dynamics in simulated virtual worlds: reproducibility, generalizability, and robustness of causal discovery methods

Ground Truth program was designed to evaluate social science modeling approaches using simulation test beds with ground truth intentionally and systematically embedded to understand and model complex Human Domain systems and their dynamics Lazer et al. (Science 369:1060–1062, 2020). Our multidisciplinary team of data scientists, statisticians, experts in Artificial Intelligence (AI) and visual analytics had a unique role on the program to investigate accuracy, reproducibility, generalizability, and robustness of the state-of-the-art (SOTA) causal structure learning approaches applied to fully observed and sampled simulated data across virtual worlds. In addition, we analyzed the feasibility of using machine learning models to predict future social behavior with and without causal knowledge explicitly embedded. In this paper, we first present our causal modeling approach to discover the causal structure of four virtual worlds produced by the simulation teams—Urban Life, Financial Governance, Disaster and Geopolitical Conflict. Our approach adapts the state-of-the-art causal discovery (including ensemble models), machine learning, data analytics, and visualization techniques to allow a human-machine team to reverse-engineer the true causal relations from sampled and fully observed data. We next present our reproducibility analysis of two research methods team’s performance using a range of causal discovery models applied to both sampled and fully observed data, and analyze their effectiveness and limitations. We further investigate the generalizability and robustness to sampling of the SOTA causal discovery approaches on additional simulated datasets with known ground truth. Our results reveal the limitations of existing causal modeling approaches when applied to large-scale, noisy, high-dimensional data with unobserved variables and unknown relationships between them. We show that the SOTA causal models explored in our experiments are not designed to take advantage from vasts amounts of data and have difficulty recovering ground truth when latent confounders are present; they do not generalize well across simulation scenarios and are not robust to sampling; they are vulnerable to data and modeling assumptions, and therefore, the results are hard to reproduce. Finally, when we outline lessons learned and provide recommendations to improve models for causal discovery and prediction of human social behavior from observational data, we highlight the importance of learning data to knowledge representations or transformations to improve causal discovery and describe the benefit of causal feature selection for predictive and prescriptive modeling.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Advancing Fusion with Machine Learning Research Needs Workshop Report

Abstract Machine learning and artificial intelligence (ML/AI) methods have been used successfully in recent years to solve problems in many areas, including image recognition, unsupervised and supervised classification, game-playing, system identification and prediction, and autonomous vehicle control. Data-driven machine learning methods have also been applied to fusion energy research for over 2 decades, including significant advances in the areas of disruption prediction, surrogate model generation, and experimental planning. The advent of powerful and dedicated computers specialized for large-scale parallel computation, as well as advances in statistical inference algorithms, have greatly enhanced the capabilities of these computational approaches to extract scientific knowledge and bridge gaps between theoretical models and practical implementations. Large-scale commercial success of various ML/AI applications in recent years, including robotics, industrial processes, online image recognition, financial system prediction, and autonomous vehicles, have further demonstrated the potential for data-driven methods to produce dramatic transformations in many fields. These advances, along with the urgency of need to bridge key gaps in knowledge for design and operation of reactors such as ITER, have driven planned expansion of efforts in ML/AI within the US government and around the world. The Department of Energy (DOE) Office of Science programs in Fusion Energy Sciences (FES) and Advanced Scientific Computing Research (ASCR) have organized several activities to identify best strategies and approaches for applying ML/AI methods to fusion energy research. This paper describes the results of a joint FES/ASCR DOE-sponsored Research Needs Workshop on Advancing Fusion with Machine Learning, held April 30–May 2, 2019, in Gaithersburg, MD (full report available at https://science.osti.gov/-/media/fes/pdf/workshop-reports/FES_ASCR_Machine_Learning_Report.pdf ). The workshop drew on broad representation from both FES and ASCR scientific communities, and identified seven Priority Research Opportunities (PRO’s) with high potential for advancing fusion energy. In addition to the PRO topics themselves, the workshop identified research guidelines to maximize the effectiveness of ML/AI methods in fusion energy science, which include focusing on uncertainty quantification, methods for quantifying regions of validity of models and algorithms, and applying highly integrated teams of ML/AI mathematicians, computer scientists, and fusion energy scientists with domain expertise in the relevant areas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Deployment of plug-in electric vehicles in China and the USA: issues and opportunities, foreword

Plug-in electric vehicles (PEVs), including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), have been promoted globally for their emission reductions and energy conservation. In addition to financial incentives for PEVs in many countries (Stephens et al. 2018), emission and energy regulatory systems provide additional incentives for PEVs in the USA, Europe, and China (European Union 2014; Innovation Center for Energy and Transportation 2019; U.S. EPA and NHTSA 2012). These incentives, together with PEV technology advances and cost reductions, have caused PEV sales to grow exponentially in many countries and global regions; PEV stocks totaled more than 5 million by the end of 2018 (Fig. 1). The International Energy Agency (2019) projects that PEV sales will grow even more quickly through 2030 to reach a total global PEV stock of 130 million to 250 million.

China↗
DOE OSTI2022

Improving sustainable tropical forest management with voluntary carbon markets

Due to a rapidly changing climate, voluntary carbon markets are gaining momentum and should be leveraged to improve and expand tropical sustainable forest management plans, limiting carbon emissions and enhancing critical carbon sinks. By sequestering more carbon than any other terrestrial ecosystem — ~1 Pg C yr –1 — tropical forests provide crucial natural climate solutions and opportunities in the evolving voluntary carbon market. Here, we argue that some issues with the current sustainable management of tropical forests can be addressed using carbon-focused sustainable forest management (SFM + C) to leverage financial resources for tropical forest carbon storage and sequestration. We suggest an extended harvest cycle in SFM + C and calculate an associated potential increase in aboveground carbon stocks of commercial timber of 1.26 Mg C ha –1 after each cycle in the Brazilian Amazon. The additional carbon storage due to a longer harvest cycle can generate carbon credits worth 152.6 (SD 9.2) US dollars per hectare in 40 years. Considering an average cost of 180 BRL per m3 of commercial timber delivered to the sawmill, an SFM + C plan with a 40-year cycle could generate 28.7% (SD 2.5) more profit than 35-year cycles by combining timber and carbon revenues. A robust carbon price could incentivize the further extension of harvest cycles, providing a monetary return that offsets the opportunity cost intrinsic to harvesting under longer cycles. Lastly, we highlight research needs to support tropical SFM + C, which can be part of a global collective effort to limit global warming to below 2 °C above pre-industrial levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluation of dried blood spot sampling for verification of exposure to chemical threat agents

Abstract Purpose Exposure to chemical threat agents (CTAs), including nerve agents, the vesicating agent sulfur mustard, and opioids, remains a significant threat to warfighter and civilian populations. Definitive analytical methods to verify exposure to CTAs require shipping refrigerated or frozen biomedical samples to reference laboratories for analysis. Logistical and financial burdens arise as the transport of biomedical samples is subject to strict restrictions and complex packaging, which, if done incorrectly, can lead to sample deterioration. The use of dried blood spot (DBS) sampling could provide operational improvements for collecting, storing, and shipping important forensic samples. Therefore, this effort focuses on developing DBS techniques with Mitra® 30-µL volumetric absorptive microsampling (VAMS®) devices for use in CTA exposure verification. Methods VAMS® devices were loaded and dried with human whole blood that was exposed to the metabolites pinacolyl methylphosphonic acid (PMPA), ethyl methylphosphonic acid (EMPA), 1,1’sulfonylbis[2-(methylsulfinyl)ethane] (SBMSE), norfentanyl, norcarfentanil, norsufentanil, and norlofentanil. Following extraction from the VAMS® devices, metabolites were detected using liquid chromatography-tandem mass spectrometry (LC–MS/MS). The methods were validated for performance by assessing sensitivity, precision, accuracy, and recovery. Results These methods were sensitive to 1 ng/mL for SBMSE, 0.5 ng/mL for PMPA, EMPA, and norfentanyl; 0.1 ng/mL for norlofentanil, and 0.05 ng/mL for norsufentanil and norcarfentanil. All methods met acceptable precision and accuracy criteria with favorable recovery. Conclusions These results demonstrated the utility of VAMS® in stabilizing human whole blood and show promise as an improved collection method for verification of exposure to various CTAs.

Toxicology↗