Search NASA⌕ Search

SEARCH · Search NASA

Results for “fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

What is the best method to fit time-resolved data? A comparison of the residual minimization and the maximum likelihood techniques as applied to experimental time-correlated, single-photon counting data

The need for measuring fluorescence lifetimes of species in subdiffraction-limited volumes in, for example, stimulated emission depletion (STED) microscopy, entails the dual challenge of probing a small number of fluorophores and fitting the concomitant sparse data set to the appropriate excited-state decay function. This need has stimulated a further investigation into the relative merits of two fitting techniques commonly referred to as “residual minimization” (RM) and “maximum likelihood” (ML). Fluorescence decays of the well-characterized standard, rose bengal in methanol at room temperature (530 ± 10 ps), were acquired in a set of five experiments in which the total number of “photon counts” was approximately 20, 200, 1000, 3000, and 6000 and there were about 2–200 counts at the maxima of the respective decays. Each set of experiments was repeated 50 times to generate the appropriate statistics. Each of the 250 data sets was analyzed by ML and two different RM methods (differing in the weighting of residuals) using in-house routines and compared with a frequently used commercial RM routine. Convolution with a real instrument response function was always included in the fitting. While RM using Pearson’s weighting of residuals can recover the correct mean result with a total number of counts of 1000 or more, ML distinguishes itself by yielding, in all cases, the same mean lifetime within 2% of the accepted value. For 200 total counts and greater, ML always provides a standard deviation of <10% of the mean lifetime, and even at 20 total counts there is only 20% error in the mean lifetime. Here, the robustness of ML advocates its use for sparse data sets such as those acquired in some subdiffraction-limited microscopies, such as STED, and, more importantly, provides greater motivation for exploiting the time-resolved capacities of this technique to acquire and analyze fluorescence lifetime data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fitness Landscape-Guided Engineering of Locally Supercharged Virus-like Particles with Enhanced Cell Uptake Properties

Protein-based nanoparticles are useful models for the study of self-assembly and attractive candidates for drug delivery. Virus-like particles (VLPs) are especially promising platforms for expanding the repertoire of therapeutics that can be delivered effectively as they can deliver many copies of a molecule per particle for each delivery event. However, their use is often limited due to poor uptake of VLPs into mammalian cells. In this study, we use the fitness landscape of the bacteriophage MS2 VLP as a guide to engineer capsid variants with positively charged surface residues to enhance their uptake into mammalian cells. By combining mutations with positive fitness scores that were likely to produce assembled capsids, we identified two key double mutants with internalization efficiencies as much as 67-fold higher than that of wtMS2. Internalization of these variants with positively charged surface residues depends on interactions with cell surface sulfated proteoglycans, and yet, they are biophysically similar to wtMS2 with low cytotoxicity and an overall negative charge. Additionally, the best-performing engineered MS2 capsids can deliver a potent anticancer small-molecule therapeutic with efficacy levels similar to antibody-drug conjugates. Through this work, we were able to establish fitness landscape-based engineering as a successful method for designing VLPs with improved cell penetration. These findings suggest that VLPs with positive surface charge could be useful in improving the delivery of small-molecule- and nucleic acid-based therapeutics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SDSS-IV MaStar: Stellar parameter determination with continuum-supplemented full-spectrum fitting

We present a stellar parameter catalog built to accompany the MaStar Stellar Library, which is a comprehensive collection of empirical, medium-resolution stellar spectra. We constructed this parameter catalog by using a multicomponent χ 2 fitting approach to match MaStar spectra to models generated by interpolating the ATLAS9-based BOSZ model spectra. The total χ 2 for a given model is defined as the sum of components constructed to characterize narrow-band features of observed spectra (e.g., absorption lines) and the broadband continuum shape separately. Extinction and systematics due to flux calibration were taken into account in the fitting. The χ 2 distribution for a given region of model space was sampled using a Markov chain Monte Carlo (MCMC) algorithm, the data from which were then used to extract atmospheric parameter estimates (T eff , log g, [Fe/H], and [α/Fe]), their corresponding uncertainties, and direct extinction measurements. Two methods were used to extract parameters and uncertainties: one that accepts the MCMC’s prescribed minimum-χ 2 result, and one that uses Bayesian inference to compute a likelihood-weighted mean from the χ 2 distribution sampled by the MCMC. Results were evaluated for internal consistency using repeat observations where available and by comparing them with external data sets (e.g., APOGEE-2 and Gaia DR2). Our spectral-fitting exercise reveals possible deficiencies in current theoretical model spectra, illustrating the potential power of MaStar spectra for helping to improve the models. This paper represents an update to the parameters that were originally presented with SDSS-IV DR17. The MaStar parameter catalog containing our BestFit results is available on the SDSS-IV DR17 website as part of version 2 of the MaStar stellar parameter value-added catalog.

79 ASTRONOMY AND ASTROPHYSICS↗

Density fitting for three-electron integrals in explicitly correlated electronic structure theory

The principal challenge in using explicitly correlated wavefunctions for molecules is the evaluation of nonfactorizable integrals over the coordinates of three or more electrons. Immense progress was made in tackling this problem through the introduction of a single-particle resolution of the identity. Decompositions of sufficient accuracy can be achieved, but only with large auxiliary basis sets. Density fitting is an alternative integral approximation scheme, which has proven to be very reliable for two-electron integrals. Here, we extend density fitting to the treatment of all three-electron integrals that appear at the MP2-F12/3*A level of theory. We demonstrate that the convergence of energies with respect to auxiliary basis size is much more rapid with density fitting than with the traditional resolution-of-the-identity approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetizability and rotational g tensors for density fitted local second-order Møller-Plesset perturbation theory using gauge-including atomic orbitals

In this paper, we present theory and implementation of an efficient program for calculating magnetizabilities and rotational g tensors of closed-shell molecules at the level of local second-order Møller-Plesset perturbation theory (MP2) using London orbitals. Density fitting is employed to factorize the electron repulsion integrals with ordinary Gaussians as fitting functions. The presented program for the calculation of magnetizabilities and rotational g tensors is based on a previous implementation of NMR shielding tensors reported by S. Loibl and M. Schütz [J. Chem. Phys. 137, 084107 (2012)]. Extensive test calculations show (i) that the errors introduced by density fitting are negligible, and (ii) that the errors of the local approximation are still rather small, although larger than for nuclear magnetic resonance (NMR) shielding tensors. Electron correlation effects for magnetizabilities are tiny for most of the molecules considered here. MP2 appears to overestimate the correlation contribution of magnetizabilities such that it does not constitute an improvement over Hartree-Fock (when comparing to higher-order methods like CCSD(T)). For rotational g tensors the situation is different and MP2 provides a significant improvement in accuracy over Hartree-Fock. The computational performance of the new program was tested for two extended systems, the larger comprising about 2200 basis functions. It turns out that a magnetizability (or rotational g tensor) calculation takes about 1.5 times longer than a corresponding NMR shielding tensor calculation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum chi-squared and goodness of fit testing

A quantum mechanical hypothesis test is presented for the hypothesis that a certain setup produces a given quantum state. Although the classical and the quantum problems are very much related to each other, the quantum problem is much richer due to the additional optimization over the measurement basis. A goodness of fit test for i.i.d quantum states is developed and a max-min characterization for the optimal measurement is introduced. We find the quantum measurement which leads both to the maximal Pitman and Bahadur efficiencies, and determine the associated divergence rates. We discuss the relationship of the quantum goodness of fit test to the problem of estimating multiple parameters from a density matrix. These problems are found to be closely related and we show that the largest error of an optimal strategy, determined by the smallest eigenvalue of the Fisher information matrix, is given by the divergence rate of the goodness of fit test.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Permutationally invariant fitting of intermolecular potential energy surfaces: A case study of the Ne-C 2 H 2 system

Here, the permutation invariant polynomial-neural network (PIP-NN) approach is extended to fit intermolecular potential energy surfaces (PESs). Specifically, three PESs were constructed for the Ne-C 2 H 2 system. PES1 is a full nine-dimensional PIP-NN PES directly fitted to ~42 000 ab initio points calculated at the level of CCSD(T)-F12a/cc-pCVTZ-F12, while the other two consist of the six-dimensional PES for C 2 H 2 [H. Han, A. Li, and H. Guo, J. Chem. Phys. 141, 244312 (2014)] and an intermolecular PES represented in either the PIP (PES2) or PIP-NN (PES3) form. The comparison of fitting errors and their distributions, one-dimensional cuts and two-dimensional contour plots of the PESs, as well as classical trajectory collisional energy transfer dynamics calculations shows that the three PESs are very similar. We conclude that full-dimensional PESs for non-covalent interacting molecular systems can be constructed efficiently and accurately by the PIP-NN approach for both the constituent molecules and intermolecular parts.

74 ATOMIC AND MOLECULAR PHYSICS↗

MB-Fit: Software infrastructure for data-driven many-body potential energy functions

Many-body potential energy functions (MB-PEFs), which integrate data-driven representations of many-body short-range quantum mechanical interactions with physics-based representations of many-body polarization and long-range interactions, have recently been shown to provide high accuracy in the description of molecular interactions from the gas to the condensed phase. Here, we present MB-Fit, a software infrastructure for the automated development of MB-PEFs for generic molecules within the TTM-nrg (Thole-type model energy) and MB-nrg (many-body energy) theoretical frameworks. Besides providing all the necessary computational tools for generating TTM-nrg and MB-nrg PEFs, MB-Fit provides a seamless interface with the MBX software, a many-body energy and force calculator for computer simulations. Given the demonstrated accuracy of the MB-PEFs, particularly within the MB-nrg framework, we believe that MB-Fit will enable routine predictive computer simulations of generic (small) molecules in the gas, liquid, and solid phases, including, but not limited to, the modeling of quantum isomeric equilibria in molecular clusters, solvation processes, molecular crystals, and phase diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative assessment of fitting errors associated with streak camera noise in Thomson scattering data analysis

Thomson scattering measurements in high energy density experiments are often recorded using optical streak cameras. In the low-signal regime, noise introduced by the streak camera can become an important and sometimes the dominant source of measurement uncertainty. In this paper, we present a formal method of accounting for the presence of streak camera noise in our measurements. We present a phenomenological description of the noise generation mechanisms and present a statistical model that may be used to construct the covariance matrix associated with a given measurement. This model is benchmarked against simulations of streak camera images. We demonstrate how this covariance may then be used to weight fitting of the data and provide quantitative assessments of the uncertainty in the fitting parameters determined by the best fit to the data and build confidence in the ability to make statistically significant measurements in the low-signal regime, where spatial correlations in the noise become apparent. These methods will have general applicability to other measurements made using optical streak cameras.

47 OTHER INSTRUMENTATION↗

Fit-free optical determination of electronic thermalization time in nematic iron-based superconductors

We present a nematic response function model (NRFM) for fit-free direct extraction of the characteristic time of ultrafast electronic thermalization in iron-based superconductors, materials with electronic nematicity. By combining the NRFM for polarization-dependent pump–probe measurements of electronic nematic response with the two-temperature model (TTM) for sub-picosecond quasiparticle relaxation, we quantify the electronic thermalization timescales and their anisotropy. The nematic response function is modeled as the difference in normalized reflectivity signals, revealing a pronounced sub-picosecond extremum in signal evolution that directly yields the characteristic electronic thermalization time. This method demonstrates that the NRFM is consistent with TTM fits of transient optical response, yielding electronic thermalization time constants on the order of 110–230 fs for the FeSe 1−x Te x and Ba(Fe 0.92 Co 0.08 ) 2 As 2 thin films. Here, the proposed approach can be applied to any material that exhibits electronic nematicity, providing a powerful tool for direct mapping of the relaxation time in nematic materials, avoiding complex experimental data-fitting procedures.

Bartenev, Alexander [University of Puerto Rico, Ma↗

Enzymes with lid-gated active sites must operate by an induced fit mechanism instead of conformational selection

The induced fit and conformational selection/population shift models are two extreme cases of a continuum aimed at understanding the mechanism by which the final key-lock or active enzyme conformation is achieved upon formation of the correctly ligated enzyme. Structures of complexes representing the Michaelis and enolate intermediate complexes of the reaction catalyzed by phosphoenolpyruvate carboxykinase provide direct structural evidence for the encounter complex that is intrinsic to the induced fit model and not required by the conformational selection model. In addition, the structural data demonstrate that the conformational selection model is not sufficient to explain the correlation between dynamics and catalysis in phosphoenolpyruvate carboxykinase and other enzymes in which the transition between the uninduced and the induced conformations occludes the active site from the solvent. The structural data are consistent with a model in that the energy input from substrate association results in changes in the free energy landscape for the protein, allowing for structural transitions along an induced fit pathway.

59 BASIC BIOLOGICAL SCIENCES↗

SPIDER. V. MEASURING SYSTEMATIC EFFECTS IN EARLY-TYPE GALAXY STELLAR MASSES FROM PHOTOMETRIC SPECTRAL ENERGY DISTRIBUTION FITTING

We present robust statistical estimates of the accuracy of early-type galaxy stellar masses derived from spectral energy distribution (SED) fitting as functions of various empirical and theoretical assumptions. Using large samples consisting of {approx}40,000 galaxies from the Sloan Digital Sky Survey (SDSS; ugriz), of which {approx}5000 are also in the UKIRT Infrared Deep Sky Survey (YJHK), with spectroscopic redshifts in the range 0.05 {<=} z {<=} 0.095, we test the reliability of some commonly used stellar population models and extinction laws for computing stellar masses. Spectroscopic ages (t), metallicities (Z), and extinctions (A{sub V} ) are also computed from fits to SDSS spectra using various population models. These external constraints are used in additional tests to estimate the systematic errors in the stellar masses derived from SED fitting, where t, Z, and A{sub V} are typically left as free parameters. We find reasonable agreement in mass estimates among stellar population models, with variation of the initial mass function and extinction law yielding systematic biases on the mass of nearly a factor of two, in agreement with other studies. Removing the near-infrared bands changes the statistical bias in mass by only {approx}0.06 dex, adding uncertainties of {approx}0.1 dex at the 95% CL. In contrast, we find that removing an ultraviolet band is more critical, introducing 2{sigma} uncertainties of {approx}0.15 dex. Finally, we find that the stellar masses are less affected by the absence of metallicity and/or dust extinction knowledge. However, there is a definite systematic offset in the mass estimate when the stellar population age is unknown, up to a factor of 2.5 for very old (12 Gyr) stellar populations. We present the stellar masses for our sample, corrected for the measured systematic biases due to photometrically determined ages, finding that age errors produce lower stellar masses by {approx}0.15 dex, with errors of {approx}0.02 dex at the 95% CL for the median stellar age subsample.

79 ASTRONOMY AND ASTROPHYSICS↗

FITTING THE UNION2.1 SUPERNOVA SAMPLE WITH THE R{sub h} = ct UNIVERSE

The analysis of Type Ia supernova data over the past decade has been a notable success story in cosmology. These standard candles offer us an unparalleled opportunity to study the cosmological expansion out to a redshift of {approx}1.5. The consensus today appears to be that {Lambda}CDM offers the best explanation for the luminosity-distance relationship seen in these events. However, a significant incompatibility is now emerging between the standard model and other equally important observations, such as those of the cosmic microwave background. {Lambda}CDM does not provide an accurate representation of the cosmological expansion at high redshifts (z >> 2). It is therefore essential to re-analyze the Type Ia supernova data in light of the cosmology (the R{sub h} = ct universe) that best represents the universe's dynamical evolution at early times. In this paper, we directly compare the distance relationship in {Lambda}CDM with that predicted by R{sub h} = ct, and each with the Union2.1 sample, and show that the two theories produce virtually indistinguishable profiles, though the fit with R{sub h} = ct has not yet been optimized. This is because the data cannot be determined independently of the assumed cosmology-the supernova luminosities must be evaluated by optimizing four parameters simultaneously with those in the adopted model. This renders the data compliant to the underlying theory, so the model-dependent data reduction should not be ignored in any comparative analysis between competing cosmologies. In this paper, we use R{sub h} = ct to fit the data reduced with {Lambda}CDM, and though quite promising, the match is not perfect. An even better fit would result with an optimization of the data using R{sub h} = ct from the beginning.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR TEMPERATURE CHANGE AND OBLIQUE PULSATION FROM LIGHT CURVE FITS OF THE PULSATING WHITE DWARF GD 358

Convective driving, the mechanism originally proposed by Brickhill for pulsating white dwarf stars, has gained general acceptance as the generic linear instability mechanism in DAV and DBV white dwarfs. This physical mechanism naturally leads to a nonlinear formulation, reproducing the observed light curves of many pulsating white dwarfs. This numerical model can also provide information on the average depth of a star's convection zone and the inclination angle of its pulsation axis. In this paper, we give two sets of results of nonlinear light curve fits to data on the DBV GD 358. Our first fit is based on data gathered in 2006 by the Whole Earth Telescope; this data set was multiperiodic containing at least 12 individual modes. Our second fit utilizes data obtained in 1996, when GD 358 underwent a dramatic change in excited frequencies accompanied by a rapid increase in fractional amplitude; during this event it was essentially monoperiodic. We argue that GD 358's convection zone was much thinner in 1996 than in 2006, and we interpret this as a result of a short-lived increase in its surface temperature. In addition, we find strong evidence of oblique pulsation using two sets of evenly split triplets in the 2006 data. This marks the first time that oblique pulsation has been identified in a variable white dwarf star.

79 ASTRONOMY AND ASTROPHYSICS↗

ACCOUNTING FOR CALIBRATION UNCERTAINTIES IN X-RAY ANALYSIS: EFFECTIVE AREAS IN SPECTRAL FITTING

While considerable advance has been made to account for statistical uncertainties in astronomical analyses, systematic instrumental uncertainties have been generally ignored. This can be crucial to a proper interpretation of analysis results because instrumental calibration uncertainty is a form of systematic uncertainty. Ignoring it can underestimate error bars and introduce bias into the fitted values of model parameters. Accounting for such uncertainties currently requires extensive case-specific simulations if using existing analysis packages. Here, we present general statistical methods that incorporate calibration uncertainties into spectral analysis of high-energy data. We first present a method based on multiple imputation that can be applied with any fitting method, but is necessarily approximate. We then describe a more exact Bayesian approach that works in conjunction with a Markov chain Monte Carlo based fitting. We explore methods for improving computational efficiency, and in particular detail a method of summarizing calibration uncertainties with a principal component analysis of samples of plausible calibration files. This method is implemented using recently codified Chandra effective area uncertainties for low-resolution spectral analysis and is verified using both simulated and actual Chandra data. Our procedure for incorporating effective area uncertainty is easily generalized to other types of calibration uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗

Ly{alpha}-EMITTING GALAXIES AT z = 2.1: STELLAR MASSES, DUST, AND STAR FORMATION HISTORIES FROM SPECTRAL ENERGY DISTRIBUTION FITTING

We study the physical properties of 216 z {approx_equal} 2.1 Ly{alpha}-emitting galaxies (LAEs) discovered in an ultra-deep narrow- MUSYC image of the ECDF-S. We fit their stacked spectral energy distribution (SED) using Charlot and Bruzual templates. We consider star formation histories (SFHs) parameterized by the e-folding time parameter {tau}, allowing for exponentially decreasing ({tau} > 0), exponentially increasing ({tau} < 0), and constant star formation rates (SFRs). We estimated the average flux at 5015 A of our LAE sample, finding a non-detection, which translates into negligible He II line emission at z {approx_equal} 2.1. In addition to this, the lack of high equivalent width (EW) Ly{alpha} line objects ruled out the hypothesis of a top-heavy initial mass function in LAEs. The typical LAEs of our sample are characterized by best-fit parameters and 68% confidence intervals of log(M{sub *}/M{sub sun}) = 8.6[8.4-9.1], E(B - V) = 0.22[0.00-0.31], {tau} = -0.02[(- 4)-18] Gyr, and age{sub SF} = 0.018[0.009-3] Gyr. Thus, we obtain robust measurements of low stellar mass and dust content, but we cannot place meaningful constraints on the age or SFH of the LAEs. We also calculate the instantaneous SFR to be 35[0.003-170] M{sub sun} yr{sup -1}, with its average over the last 100 Myr before observation giving (SFR){sub 100} = 4[2-30] M{sub sun} yr{sup -1}. When we compare the results for the same SFH, typical LAEs at z {approx_equal} 2.1 appear dustier and show higher instantaneous SFRs than z {approx_equal} 3.1 LAEs, while the observed stellar masses of the two samples seem consistent. Because the majority are low-mass galaxies, our typical LAEs appear to occupy the low-mass end of the distribution of star-forming galaxies at z {approx} 2. We perform SED fitting on several sub-samples selected based on photometric properties and find that LAE sub-samples at z {approx_equal} 2.1 exhibit heterogeneous properties. The typical IRAC-bright, UV-bright, and red LAEs have the largest stellar mass and dust reddening. The typical UV-faint, IRAC-faint, and high EW LAE sub-samples appear less massive (<10{sup 9} M{sub sun}) and less dusty, with E(B - V) consistent with zero.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTRAL ENERGY DISTRIBUTION FITTING WITH MARKOV CHAIN MONTE CARLO: METHODOLOGY AND APPLICATION TO z = 3.1 Ly{alpha}-EMITTING GALAXIES

We present GalMC, a Markov Chain Monte Carlo (MCMC) algorithm designed to fit the spectral energy distributions (SEDs) of galaxies to infer physical properties such as age, stellar mass, dust reddening, metallicity, redshift, and star formation rate. We describe the features of the code and the extensive tests conducted to ensure that our procedure leads to unbiased parameter estimation and accurate evaluation of uncertainties. We compare its performance to grid-based algorithms, showing that the efficiency in CPU time is {approx}100 times better for MCMC for a three-dimensional parameter space and increasing with the number of dimensions. We use GalMC to fit the stacked SEDs of two samples of Lyman alpha emitters (LAEs) at redshift z = 3.1. Our fit reveals that the typical LAE detected in the IRAC 3.6 {mu}m band has age = 0.67 [0.37-1.81] Gyr and stellar mass = 3.2 [2.5-4.2] x 10{sup 9} M{sub sun}, while the typical LAE not detected at 3.6 {mu}m has age = 0.06 [0.01-0.2] Gyr and stellar mass = 2 [1.1-3.4] x 10{sup 8} M{sub sun}. The SEDs of both stacks are consistent with the absence of dust. The data do not significantly prefer exponential with respect to constant star formation history. The stellar populations of these two samples are consistent with the previous study by Lai et al., with some differences due to the improved modeling of the stellar populations. A constraint on the metallicity of z = 3.1 LAEs from broadband photometry, requiring Z < Z{sub sun} at 95% confidence, is found here for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

THE PHYSICAL CONDITIONS IN STARBURSTS DERIVED FROM BAYESIAN FITTING OF MID-INFRARED SPECTRAL ENERGY DISTRIBUTION MODELS: 30 DORADUS AS A TEMPLATE

To understand and interpret the observed spectral energy distributions (SEDs) of starbursts, theoretical or semi-empirical SED models are necessary. Yet, while they are well founded in theory, independent verification and calibration of these models, including the exploration of possible degeneracies between their parameters, are rarely made. As a consequence, a robust fitting method that leads to unique and reproducible results has been lacking. Here we introduce a novel approach based on Bayesian analysis to fit the Spitzer-Infrared Spectrometer spectra of starbursts using the SED models proposed by Groves et al.. We demonstrate its capabilities and verify the agreement between the derived best-fit parameters and actual physical conditions by modeling the nearby, well-studied, giant H II region 30 Doradus in the LMC. The derived physical parameters, such as cluster mass, cluster age, interstellar medium pressure, and covering fraction of photodissociation regions, are representative of the 30 Doradus region. The inclusion of the emission lines in the modeling is crucial to break degeneracies. We investigate the limitations and uncertainties by modeling subregions, which are dominated by single components, within 30 Doradus. A remarkable result for 30 Doradus in particular is a considerable contribution to its mid-infrared spectrum from hot ({approx}300 K) dust. The demonstrated success of our approach will allow us to derive the physical conditions in more distant, spatially unresolved starbursts.

79 ASTRONOMY AND ASTROPHYSICS↗