Search NASA⌕ Search

SEARCH · Search NASA

Results for “flat geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

A nAttractor mechanism for nAdS 2 /nCFT 1 holography

We study the nearly AdS 2 geometry of nearly extremal black holes in $\mathcal{N} = 2$ supergravity in four dimensions. In the strictly extreme limit the attractor mechanism for asymptotically flat black holes states that the horizon geometries of these black holes are independent of scalar moduli. We determine the dependence of the near extreme geometry on asymptotic moduli and express the result in simple formulae that generalize the extremal attractor mechanism to nearly extreme black holes. This is a nAttractor mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

CFD Verification and Validation of Wire-Wrapped Pin Assemblies

TerraPower is participating in a cooperative project among industry, the national lab system, and academia to perform Verification and Validation (V and V) of Computational Fluid Dynamics (CFD) methods for predicting the flow and heat transfer within liquid-metal-cooled nuclear fuel assemblies with wire-wrapped fuel pins. This project, consisting of both experimental and numerical components, uses surrogate fluids and electrically heated fuel pins to substitute for the liquid metal coolant and the nuclear heat source. The experiments include both unheated assemblies to measure the flow velocities with Laser Doppler Velocimetry (LDV) and Particle Image Velocimetry (PIV), as well as heated assemblies to measure the temperatures of the fluid and the simulated fuel pins with thermocouples. Both sets of experiments also measure the pressure at multiple locations in the system. The numerical component of this work involves high-fidelity Large-Eddy Simulation (LES) modeling and industry-standard Reynolds-Averaged Navier-Stokes (RANS) modeling of the experiments. Furthermore, the experiments and simulations will be conducted on two duct geometries: the first is a non-deformed hexagonal duct that has flat internal duct faces that represents a beginning of life geometry. The other is a deformed duct where the internal hexagonal flow area enlarges then decreases along the axial height to represent the changes that occur to the duct geometry from pressure and irradiation effects in the core. This paper describes the methods and results of the industrial, RANS-based CFD code verification, solution verification, and solution validation. The V and V simulations are being performed for the following experiment test geometries: - Isothermal non-deformed bundle; - Heated non-deformed bundle; - Isothermal deformed bundle; - Heated deformed bundle. These flows have been computed at first with the pre-test design specifications, without the aid of any experimental results. Later, post-test calculations will be performed incorporating the actual test conditions and input from some of the experimental results. These RANS simulations of helically wire-wrapped fuel assemblies employ meshes of bare pins without the wire-wrap in the bundle. The effect of wire-wrap on the flow is accounted for by introducing a momentum source into the governing fluid equations. The momentum source is only applied to cells corresponding to the location of the wire-wrap, and its components in each cell are based on the local flow field. This methodology simplifies the geometry and mesh generation and reduces the cell count, while still capturing the effects of the wire-wrap. The momentum source approach is used for all of the assembly simulations performed in this study. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Topological flat bands in a family of multilayer graphene moiré lattices

Moiré materials host a wealth of intertwined correlated and topological states of matter, all arising from flat electronic bands with nontrivial quantum geometry. A prominent example is the family of alternating-twist magic-angle graphene stacks, which exhibit symmetry-broken states at rational fillings of the moiré band and superconductivity close to half filling. Here, we introduce a second family of twisted graphene multilayers made up of twisted sheets of M- and N-layer Bernal-stacked graphene flakes. Calculations indicate that applying an electric displacement field isolates a flat and topological moiré conduction band that is primarily localized to a single graphene sheet below the moiré interface. Phenomenologically, the result is a striking similarity in the hierarchies of symmetry-broken phases across this family of twisted graphene multilayers. Our results show that this family of structures offers promising new opportunities for the discovery of exotic new correlated and topological phenomena, enabled by using the layer number to fine tune the flat moiré band and its screening environment.

Electronic properties and materials↗
DOE OSTI2025

Microscopic signatures of topology in twisted MoTe 2

In moiré materials with flat electronic bands and suitable quantum geometry, strong correlations can give rise to various topological states of matter. The non-trivial band topology of twisted MoTe 2 , which is responsible for its fractional quantum anomalous Hall states, is predicted to arise from a skyrmion lattice texture in the layer pseudospin of the electronic wavefunctions. Tracing the layer polarization of wavefunctions within the moiré unit cell can, thus, offer insights into the band topology. Here we measure the out-of-plane component of the layer-pseudospin skyrmion textures of twisted MoTe 2 using scanning tunnelling microscopy and spectroscopy. We do this by simultaneously visualizing the moiré lattice structure and the spatial localization of its electronic states. We find that the wavefunctions associated with the topological flat bands exhibit a spatially dependent layer polarization within the moiré unit cell, in agreement with our theoretical modelling. Furthermore, our work enables future local probe studies of the intertwined correlated and topological states arising in gate-tunable devices.

Electronic properties and materials↗
NASA NTRS2008

Effect of Weld Tool Geometry on Friction Stir Welded AA2219-T87 Properties

In this study, flat panels of AA2219-T87 were friction stir welded (FSWed) using weld tools with tapered pins The three pin geometries of the weld tools included: 0 (straight cylinder), 30 , and 60 angles on the frustum. For each weld tool geometry, the FSW process parameters were optimized to eliminate defects. A constant heat input was maintained while varying the process parameters of spindle rpm and travel speed. This provided a constant heat input for each FSW weld panel while altering the hot working conditions imparted to the workpiece. The resulting mechanical properties were evaluated from tensile test results of the FSW joint.

Querin, Joseph A.↗
DOE OSTI2025

Higher Vortexability: Zero-Field Realization of Higher Landau Levels

The rise of moiré materials has led to experimental realizations of integer and FCIs in small or vanishing magnetic fields. At the same time, a set of minimal conditions sufficient to guarantee an Abelian fractional state in a flat band were identified, namely “ideal" or “vortexable" quantum geometry. Such vortexable bands share essential features with the LLL, while excluding the need for more fine-tuned aspects such as flat Berry curvature. A natural and important generalization is to ask if such conditions can be extended to capture the quantum geometry of higher Landau levels, particularly the first (1LL), where non-Abelian states at ν = 1/2, 2/5 are known to be competitive. The possibility of realizing these states at zero magnetic field, and perhaps even more exotic ones, could become a reality if we could identify the essential structure of the 1LL in Chern bands. In this work, we introduce a precise definition of 1LL quantum geometry, along with a figure of merit that measures how closely a given band approaches the 1LL. Furthermore, periodically strained Bernal graphene is shown to realize such a 1LL structure even in zero magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Weyl points and line nodes in gyroid photonic crystals

Weyl points and line nodes are three-dimensional linear point and line degeneracies between two bands. In contrast to two-dimensional Dirac points, which are their lower-dimensional analogues, Weyl points are stable in momentum space, and the associated surface states are predicted to be topologically non-trivial. However, Weyl points are yet to be discovered in nature. We report photonic crystals based on double-gyroid structures, exhibiting frequency-isolated Weyl points with complete phase diagrams by breaking the parity and time-reversal symmetries. Gapless surface dispersions associated with non-zero Chern numbers are demonstrated. Line nodes are also found in similar geometries, the associated surface states forming flat dispersion bands. Our results are based on realistic ab initio calculations with true predictive power and should be readily realizable experimentally from microwave to optical frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Discovery of charge density wave in a kagome lattice antiferromagnet

A hallmark of strongly correlated quantum materials is the rich phase diagram resulting from competing and intertwined phases with nearly degenerate ground state energies. A well-known example is the copper oxides, where a charge density wave (CDW) is ordered well above and strongly coupled to the magnetic order to form spin-charge separated stripes that compete with superconductivity. Recently, such rich phase diagrams have also been revealed in correlated topological materials. In two-dimensional kagome lattice metals consisting of corner-sharing triangles, the geometry of the lattice can produce flat bands with localized electrons, non-trivial topology, chiral magnetic order, superconductivity and CDW order. While CDW has been found in weakly electron correlated nonmagnetic AV 3 Sb 5 (A = K, Rb, Cs), it has not yet been observed in correlated magnetic ordered kagome lattice metals. Here we report the discovery of CDW within the antiferromagnetic (AFM) ordered phase of kagome lattice FeGe. The CDW in FeGe occurs at wavevectors identical to that of AV 3 Sb 5 , enhances the AFM ordered moment, and induces an emergent anomalous Hall effect. Furthermore, our findings suggest that CDW in FeGe arises from the combination of electron correlations-driven AFM order and van Hove singularities-driven instability possibly associated with a chiral flux phase, in stark contrast to strongly correlated copper oxides and nickelates, where the CDW precedes or accompanies the magnetic order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

AC losses of Roebel and CORC ® cables at higher AC magnetic fields and ramp rates

We have measured ReBCO coated conductor-based conductor on round core (CORC ® ) and Roebel cables at 77 K in a spinning magnet calorimeter, which subjected the tapes in the samples to a radial magnetic field of 566 mT (peak) at frequencies up to 120 Hz (272 T s -1 , cyclic average) with an approximately sinusoidal waveform. The samples were oriented such that the field applied to the tapes within the cables was entirely radial, simplifying subsequent analysis. An expression for loss which included hysteretic, flux creep and eddy current losses was fit to both the CORC ® and the Roebel cables. This expression allowed easy comparison of the relative influence of eddy currents and flux creep (or power-law behavior) effects. The loss of both the CORC ® and Roebel cables measured here were seen to be essentially the sum of the hysteretic loss, flux creep effects, and the normal metal eddy current losses of the individual tapes. The losses of these cables were measured at high B × d B /d t with no coupling current loss observed under the present preparation conditions. The influence of flux creep effects on loss were not negligible. The losses of the CORC ® cable per meter of tape were seen to be reduced from the case of a flat tape because of the helical geometry of the tapes.

Physics↗
DOE OSTI2021

Ultralocality and slow contraction

Abstract We study the detailed process by which slow contraction smooths and flattens the universe using an improved numerical relativity code that accepts initial conditions with non-perturbativedeviations from homogeneity and isotropy along two independent spatial directions.Contrary to common descriptions of the early universe,we find that the geometry first rapidly converges to an inhomogeneous, spatially-curved and anisotropic ultralocal state in which all spatialgradient contributions to the equations of motion decrease as an exponential in time to negligible values. This is followed by a second stage in which the geometry converges to a homogeneous, spatially flat and isotropic spacetime. In particular, the decay appears to follow the same history whether the entire spacetime or only parts of it are smoothed by the end of slow contraction.

Astronomy & Astrophysics↗
DOE OSTI2022

Verification and Validation Activities for the Multi-Fidelity Toolkit

The Multi-Fidelity Toolkit (MFTK) is a simulation tool being developed at Sandia National Laboratories for aerodynamic predictions of compressible flows over a range of physics fidelities and computational speeds. These models include the Reynolds-Averaged-Navier-Stokes (RANS) equations, the Euler equations, and modified Newtonian aerodynamics (MNA) equations, and they can be invoked independently or coupled with hierarchical Kriging to interpolate between high-fidelity simulations using lower-fidelity data. However, as with any new simulation capability, verification and validation are necessary to gather credibility evidence. This work describes formal code- and solution-verification activities as well as model validation with uncertainty considerations. Code verification is performed on the MNA model by comparing with an analytical solution for flat-plate and inclined-plate geometries. Solution-verification activities include grid-refinement studies of HIFiRE-1 wind tunnel measurements, which are used for validation, for all model fidelities. A thorough treatment of the validation comparison with prediction error and validation uncertainty is also presented.

42 ENGINEERING↗
DOE OSTI2025

Ising on $\mathbb{S}^2$-- The Affine Conjecture

We review the recent construction \cite{brower2024isingmodelmathbbs2} of the 2d Ising model on a triangulated sphere $\mathbb{S}^2$. Surprisingly, this led to a precise map of the lattice couplings to the target geometry in order to reach the conform field theory (CFT) in the continuum limit. For the integrable 2d Ising CFT, the map was found analytically \cite{Brower_2023}. Here we conjecture how this might be generalized. The discrete geometry is implemented by the piecewise flat triangulation introduced by Regge in 1960 for the Einstein Hilbert action \cite{Regge1961GeneralRW}. Then following our Ising example, we posit the existence of a smooth map of lattice couplings in affine parameters consistent with quantum correlators. A sequence of theoretical investigations and numerical simulations are recommended to test this conjecture. They begin with non-integrable CFT's -- the 2d $\phi^4$ theory on $\mathbb{S}^2$; the 3d Ising model on $\mathbb{S}^3$ and $\mathbb{R} \times \mathbb{S}^2$; QED3 on $\mathbb{R} \times \mathbb{S}^{2} $ as an intermediate step to 4d non-Abelian lattice gauge theory on $\mathbb{R} \times \mathbb{S}^3$.

Brower, Richard C. [Boston U.] (ORCID:000000028185↗
NASA NTRS1972

Orifice In-flow Efficiency Tests. Volume 1: Test Results. Volume 2: Application to Shuttle Venting During Entry

An investigation was made of the capability for computing internal pressures throughout flight for compartments located within space shuttle vehicles. A test program was conducted at a 6 x 6 foot supersonic wind tunnel to determine orifice efficiencies for the flow of air into a compartment from a flowing external stream. Measurements were made over a Mach number range of 0.7 to 1.9 for varying orifice geometry, vent orientation, vent plate thickness, flat plate boundary layer thickness, and pressure ratio across the vent plate. A computer program developed for outflow venting was modified for use in computing compartment pressures for inflow conditions. Results from both the outflow and inflow computer programs are included. A user's manual and program listing of the inflow venting program are also included.

Haukohl, J.↗
NASA NTRS1978

Improved double-pass michelson interferometer

Interferometer design separates beams by offsetting centerlines of cat's-eye retroreflectors vertically rather than horizontally. Since beam splitter is insensitive to minimum-thickness condition in this geometry, relatively-low-cost, optically flat plate can be used.

Schindler, R. A.↗
NASA NTRS1980

Full-coverage film cooling on flat, isothermal surfaces: Data and predictions

The heat transfer and fluid mechanics characteristics of full-coverage film cooling were investigated. The results for flat, isothermal plates for three injection geometries (normal, slant, and compound angle) are summarized and data concerning the spanwise distribution of the heat transfer coefficient within the blowing region are presented. Data are also presented for two different numbers of rows of holes (6 and 11). The experimental results summarized can be predicted with a two dimensional boundary layer code, STANCOOL, by providing descriptors of the injection parameters as inputs.

Crawford, M. E.↗
NASA NTRS1980

Numerical simulation of shear flows over wavy boundaries

The full time-dependent two dimensional Navier-Stokes equations are solved using spectral methods to achieve high spatial accuracy and high order time-splitting methods together with conformal mapping methods to allow simulation of flow over steep waves, including general turbulent Reynolds stresses. The programs are used to study the properties of laminar and turbulent flow over a flat plate and in various wavy geometries. Results are compared with both available theory and experiment. For laminar flow, good agreement is achieved. For turbulent flow, the agreement is less satisfactory and may be explained by the simplified turbulent modelling use in the calculations.

Orszag, S. A.↗
NASA NTRS2002

Towards a 3D Space Radiation Transport Code

High-speed computational procedures for space radiation shielding have relied on asymptotic expansions in terms of the off-axis scatter and replacement of the general geometry problem by a collection of flat plates. This type of solution was derived for application to human rated systems in which the radius of the shielded volume is large compared to the off-axis diffusion limiting leakage at lateral boundaries. Over the decades these computational codes are relatively complete and lateral diffusion effects are now being added. The analysis for developing a practical full 3D space shielding code is presented.

Wilson, J. W.↗
NASA NTRS2007

Simplified Generation of High-Angular-Momentum Light Beams

A simplified method of generating a beam of light having a relatively high value of angular momentum (see figure) involves the use of a compact apparatus consisting mainly of a laser, a whispering- gallery-mode (WGM) resonator, and optical fibers. The method also can be used to generate a Bessel beam. ( Bessel beam denotes a member of a class of non-diffracting beams, so named because their amplitudes are proportional to Bessel functions of the radii from their central axes. High-order Bessel beams can have high values of angular momentum.) High-angular-momentum light beams are used in some applications in biology and nanotechnology, wherein they are known for their ability to apply torque to make microscopic objects rotate. High-angular-momentum light beams could also be used to increase bandwidths of fiber-optic communication systems. The present simplified method of generating a high-angular-momentum light beam was conceived as an alternative to prior such methods, which are complicated and require optical setups that include, variously, holograms, modulating Fabry-Perot cavities, or special microstructures. The present simplified method exploits a combination of the complex structure of the electromagnetic field inside a WGM resonator, total internal reflection in the WGM resonator, and the electromagnetic modes supported by an optical fiber. The optical fiber used to extract light from the WGM resonator is made of fused quartz. The output end of this fiber is polished flat and perpendicular to the fiber axis. The input end of this fiber is cut on a slant and placed very close to the WGM resonator at an appropriate position and orientation. To excite the resonant whispering- gallery modes, light is introduced into the WGM resonator via another optical fiber that is part of a pigtailed fiber-optic coupler. Light extracted from the WGM resonator is transformed into a high-angular- momentum beam inside the extraction optical fiber and this beam is emitted from the polished flat output end. By adjusting the geometry of this apparatus, it is possible to generate a variety of optical beams characterized by a wide range of parameters. These beams generally have high angular momenta and can be of either Bessel or Bessel-related types.

Savchenkov, Anatoliy↗