Search NASA⌕ Search

SEARCH · Search NASA

Results for “flooding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The use of remote sensing imagery for environmental land use and flood hazard mapping

Flood hazard maps have been constructed for Graham, Yuma, and Yavapai Counties in Arizona using remote sensing techniques. Watershed maps of priority areas were selected on the basis of their interest to the county planning staff and represented areas of imminent or ongoing development and those known to be subject to inundation by storm runoff. Landsat color infrared imagery at scales of 1:1,000,000, 1:500,000, and 1:250,000 was used together with high-altitude aerial photography at scales of 1:120,000 and 1:60,000 to determine drainage patterns and erosional features, soil type, and the extent and type of ground cover. The satellite imagery was used in the form of 70 mm chips for enhancement in a color additive viewer and in all available enlargement modes. Field checking served as the main backup to the interpretations. Areas with high susceptibility to flooding were determined with a high level of confidence from the remotely sensed imagery.

Mouat, D. A.↗

Flood-plain delineation using multispectral data analysis

The paper explores the application of a remote sensing technique that may permit the determination of flood-plain areas without the extensive work associated with existing techniques. Multispectral scanner data were simulated by utilizing the density differences in a color-infrared transparency for a section of the Navasota River, Texas. The transparency was taken from a low-flying aircraft and covered an area approximating a square mile. The simulated data were processed by an automatic classification technique previously developed in the remote sensing field. The technique used involves the application of the maximum likelihood rule in order to categorize the data being processed. An attempt was made to distinguish between areas known to be in the flood plain and those outside. A reasonabke correlation was found between boundaries based on computer-processed multispectral data and those produced by techniques currently in use.

Harker, G. R.↗

Isothermal elastohydrodynamic lubrication of point contacts. III - Fully flooded results

Procedures outlined by the authors in an earlier publication (1976) on theoretical formulation for isothermal elastohydrodynamic lubrication of point contacts are used to assess the influence of the ellipticity parameter and the dimensionless speed, load, and material parameters on minimum film thickness. Conditions equivalent to using solid materials of bronze, steel, and silicon nitride, and lubricants of paraffinic and naphthenic mineral oils are considered in obtaining the exponent on the dimensionless material parameter. Thirty-four different cases are used to generate the fully flooded film thickness formula. A fully flooded condition is said to exist when the inlet distance of the conjunction ceases to influence in any significant way the minimum film thickness. Contour plots are also shown that indicate in detail the pressure spike and two side lobes in which the minimum film thickness occurs.

Hamrock, B. J.↗

The Spokane flood controversy

An enormous plexus of proglacial channels that eroded into the loess and basalt of the Columbia Plateau, eastern Washington is studied. This channeled scabland contained erosional and depositional features that were unique among fluvial phenomena. Documentation of the field relationships of the region explains the landforms as the product of a relatively brief, but enormous flood, then so-called the Spokane flood.

Baker, V. R.↗

Fully flooded elastohydrodynamic lubricated elliptical contacts

Emphasis is on fully flooded, elastohydrodynamic lubricated, elliptical contacts. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. A brief description of the relevant equations used in the elastohydrodynamic lubrication of elliptical contacts is given. The most important practical aspect of the elastohydrodynamic theory is the determination of the minimum film thickness within the contact. The maintenance of a fluid film of adequate magnitude is an essential feature of the correct operation of lubricated machine elements. The results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. Film thickness equations are developed for materials of high elastic modulus, such as metal, and for materials of low elastic modulus, such as rubber. In addition to the film thickness equations that are developed, plots of pressure and film thickness are presented. These theoretical solutions for film thickness have all the essential features of previously reported experimental observations based on optical interferometry. Correlation between theory and experiments is also presented.

Hamrock, B. J.↗

Crustal influence in the generation of continental flood basalts

The suggestion that primordial undifferentiated material may exist in the earth's mantle has recently been revived on the strength of Nd isotope data for two types of young continental rocks - flood basalts and kimberlites. The limited published data show a clustering of Nd isotopic compositions close to those for meteorites with chondritic relative rare-earth (REE) abundance. In contrast, data are presented for samples from the Columbia flood basalt province of the northwestern United States which show large isotopic variability suggestive of mixing processes acting after the separation of the primary magmas from their mantle source.

Carlson, R. W.↗

Utilization of Meteorological Satellite Imagery for World-Wide Environmental Monitoring the Lower Mississippi River Flood of 1979 - Case 1

The 1979 Lower Mississippi River flood was selected as a test case of environmental disaster monitoring utilizing NOAA-n imagery. A small scale study of the St. Louis Missouri area comparing ERTS-1 (LANDSAT) and NOAA-2 imagery and flood studies using only LANDSAT imagery for mapping the Rad River of the North, and Nimbus-5 imagery for East Australia show the nonmeteorological applications of NOAA satellites. While the level of NOAA-n imagery detail is not that of a LANDSAT image, for operational environmental monitoring users the NOAA-n imagery may provide acceptable linear resolution and spectral isolation.

Helfert, M. R.↗

Monitoring of heavy flooding by orbital remote sensing: The example of the Doce river valley

The application of temporal LANDSAT data to study floods was verified, and the natural features responsible for this phenomenon were surveyed using the Doce river valley as a test site, because of the catastrophic (1978-1979) flood. Data from LANDSAT images and CCT's were used. Geomorphical mapping evaluated morphostructural features. Seven and nine classes of water surfaces for dry and rainy seasons were analyzed. The magnitude of the changes from preflood to postflood stage are estimated. The single Pixel program was applied to correlate the drainage basin characteristics to the grey level of LANDSAT data.

Dejesusparada, N.↗

Monthly and seasonal occurrences of potential flash flood-producing rains determined from Manually Digitized Radar data

An analysis is conducted of a small 4-year climatological data base of Manually Digitized Radar (MDR) data to infer the monthly and seasonal distributions of the relative frequency of occurrence of potential flash flood-producing rains over the Central and Eastern U.S. Some possible meteorological mechanisms for producing potential flash flooding rains are discussed in terms of the relative maxima and minima in the monthly and seasonal frequency distributions over the MDR network. Frequencies were found to be generally higher in more southern locations and lower farther north in all months and seasons. However, most locations experienced an annual cycle in the frequency of occurrence with maxima in summer and minima in winter. In given seasons and months, local areas of maximum and minimum occurrences may be related to quasi-stationary meteorological processes that trigger and organize intense convection over a common area.

Wilson, G. S.↗

Use of NOAA-N satellites for land/water discrimination and flood monitoring

A tool for monitoring the extent of major floods was developed using data collected by the NOAA-6 advanced very high resolution radiometer (AVHRR). A basic understanding of the spectral returns in AVHRR channels 1 and 2 for water, soil, and vegetation was reached using a large number of NOAA-6 scenes from different seasons and geographic locations. A look-up table classifier was developed based on analysis of the reflective channel relationships for each surface feature. The classifier automatically separated land from water and produced classification maps which were registered for a number of acquisitions, including coverage of a major flood on the Parana River of Argentina.

Tappan, G.↗

Detection of lowland flooding using active microwave systems

The development of radar systems with longer wavelenths (greater than 3 cm) has provided new possibilities regarding the utilization of radar. Thus, it has been found that the interpretation of data from radar images can be a valuable classification aid for applications related to water resources. In the case of an interpreter accustomed to photographic or visible/infrared images, an evaluation of radar images presents some problems, because the radar is sensing a set of surface characteristics which have little influence on visible/infrared systems. Detectable features in radar images caused by differences in dielectric properties are usually associated with the water content of either soils or vegetation. The present paper is concerned with studies which were initiated in 1976. The studies had the objective to define the magnitude of the effects on radar data caused by flood waters under vegetation. The obtained results indicate the feasibility to detect flood conditions beneath a forest canopy, and to obtain an improved definition of the land-water boundary.

Ormsby, J. P.↗

Material tradeoffs to minimize flooding reactivity

In the GE 100 KWe SP-100 design, the array of fuel pins in the core was surrounded by a thin neutron barrier made of a mixture of Nb-1 percent Zr and 20 percent B4C. The purpose of this barrier was to prevent the return to the reactor of thermalized neutrons in the event of a reactor flooding accident. Neutronically, the barrier produced a reduction in k sub eff of 15 percent. However, a mixture of Nb-1 percent Zr and B4C is a development item and may not be possible to produce. Several alternatives to this design were investigated. These include the use of W-26 percent Re for the fuel barrier and the introduction of fuel pin ducts made of Ta-8 percent W-2 percent Hf, Hf-10 percent Nb or pure Re. The use of W-26 percent Re for the fuel barrier material in place of W, and the use of T111, Hf-10 percent Nb, or Re duct material in place of Nb-1 percent Zr or Nb-1 percent Zr-20 percent B4C were found to substantially decrease k sub eff in the flooding situation. The best choice neutronically for duct material is Hf-10 percent Nb, because of its small impact on the k sub eff of the normal core.

Protsik, R.↗

Making Topographical Maps From SAR and Flood-Gauge Data

Collection of computer programs processes image data obtained by synthetic-aperture radar (SAR) along with measurements of water levels taken at selected points on ground to generate three-dimensional maps of surveyed terrain. Information in maps presented in variety of useful ways suited to study of such phenomena as flooding, damage caused by floods, flow of nutrients from forests to river and marine ecosystems, and effects of subsidence of ground or of rising sea levels.

Imhoff, Marc Lee↗

The derivation of a sub-canopy digital terrain model of a flooded forest using synthetic aperture radar

Synthetic aperture radar data from the Shuttle Imaging Radar-B Mission were combined with the tide surface information to create a digital terrain model for a 70-km by 40-km section of the Mouths of the Ganges forests in southern Bangladesh. The dominance of the interaction phenomenon (canopy to surface or surface to canopy reflection) in flooded forests was exploited to create sub-canopy flood boundary maps for two different tide times. The boundary maps were digitally combined in x, y, z space with tide elevation models created from tide gauge data gridding the survey site and used as input to interpolation routines to create a terrain model. The end product represents a significant step in our ability to characterize the topography and hydrology of wetland ecosystems. The model derived here can be used for simulating tidal flow and nutrient transport from the forest to the marine habitat.

Imhoff, Marc Lee↗

Microwave Backscatter and Attenuation Dependence of Leaf Area Index for Flooded Rice Fields

Wetlands are important for their role in global climate as a source of methane and other reduced trace gases. As part of an effort to determine whether radar is suitable for wetland vegetation monitoring, we have studied the dependence of microwave backscatter and attenuation on leaf area index (LAI) for flooded rice fields. We find that the radar return from a flooded rice field does show dependence on LAI. In particular, the C-band VV cross section per unit area decreases with increasing LAI. A simple model for scattering from rice fields is derived and fit to the observed HH and VV data. The model fit provides insight into the relation of backscatter to LAI and is also used to calculate the canopy path attenuation as a function of LAI.

Durden, Stephen L.↗

Numerical Simulations of Precipitation Processes, Microphysics, and Microwave Radiative Properties of flood Producing Storms in Mediterranean & Adriatic Basins

A comprehensive understanding of the meteorological and microphysical nature of Mediterranean storms requires a combination of in situ data analysis, radar data analysis, and satellite data analysis, effectively integrated with numerical modeling studies at various scales. An important aspect of understanding microphysical controls of severe storms, is first understanding the meteorological controls under which a storm has evolved, and then using that information to help characterize the dominant microphysical processes. For hazardous Mediterranean storms, highlighted by the October 5-6, 1998 Friuli flood event in northern Italy, a comprehensive microphysical interpretation requires an understanding of the multiple phases of storm evolution. This involves intense convective development, Sratiform decay, orographic lifting, and sloped frontal lifting processes, as well as the associated vertical motions and thermodynamical instabilities governing physical processes that effect details of the size distributions and fall rates of the various types of hydrometeors found within the storm environment. This talk overviews the microphysical elements of a severe Mediterranean storm in such a context, investigated with the aid of TRMM satellite and other remote sensing measurements, but guided by a nonhydrostatic mesoscale model simulation of the Friuli flood event. The data analysis for this paper was conducted by my research groups at the Global Hydrology and Climate Center in Huntsville, AL and Florida State University in Tallahassee, and in collaboration with Dr. Alberto Mugnai's research group at the Institute of Atmospheric Physics in Rome. The numerical modeling was conducted by Professor Oreg Tripoli and Ms. Giulia Panegrossi at the University of Wisconsin in Madison, using Professor Tripoli's nonhydrostatic modeling system (NMS). This is a scalable, fully nested mesoscale model capable of resolving nonhydrostatic circulations from regional scale down to cloud scale and below.

Smith, Eric A.↗

Real Time Monitoring of Flooding from Microwave Satellite Observations

In this report, we review the progress to date including results from data analyses and present a schedule of milestones for the remainder of the project. We discuss the processing of flood extent data and SSM/I brightness temperature data for the 1993 Midwest Flood. We present preliminary results from the derivation of open water fraction from brightness temperatures.

Galantowicz, John F.↗

What Caused the August 2002 Catastrophic Floods in Central Europe?

The catastrophic August 2002 floods in central Europe followed very intense rains over a span of several days, reported over a large region. On Aug. 12 meteorological stations over an elongated swath, from the vicinity of Saltzburg (Austria) in the south to the vicinity of Berlin in the north, reported precipitation exceeding 100 mm/day. Synoptic analysis points to a jet streak in the mid-Atlantic. moving eastward, which reached Spain on about 9th of August. An understanding of the mechanism that ultimately produced the unprecedented rains was derived conveniently from the GEOS 3 Model developed at NASA Goddard Space Flight Center. Examining the scenarios of omega, we observe on Aug. 10, OOZ, a center of ascending vertical motions, stronger than 0.6 Pa/s at the 700 hPa level over the western Mediterranean. Advecting moist and warm air to higher levels from the near-ocean level, the center moved eastward, reaching the northern Adriatic on Aug. 11, OOZ, then continuing northeast to the regions where most intense precipitation was reported on Aug. 12. The omega at 850 hPa shows a closely similar pattern but especially interesting is the 850 omega pattern on Aug. 12, 12Z, which shows descending motions stronger than 0.4 Pa/s over the eastern Po Valley (northern Italy), and an elongated region of ascending motions stronger than 1.0 Pa/s coinciding in extent with the extreme-precipitation region on that day. At that time, the cyclone which formed over the Po Valley, was centered on eastern Czech Republic, producing on its western side these strong ascending motions over the precipitation region. The pattern of the surface-pressure lows provides further insight into the processes, and specifically, the Aug. 12,06Z map, shows a 996 mb low over the western Czech Republic. The flooding following the extreme rains was acerbated by the fact that river-channels were made narrower over the recent decades by the urbanization of river banks.

Otterman, J.↗