Search NASA⌕ Search

SEARCH · Search NASA

Results for “general transients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Numerical Prediction of Transient Axial Thrust and Internal Flows in a Rocket Engine Turbopump

This paper presents the application of the Generalized Fluid System Simulation Program (GFSSP) to model the time-dependent flow in a complex secondary flow circuit of the turbopump of the Fastrac engine currently under development at Marshall Space Flight Center. GFSSP is a general purpose computer program for analyzing steady-state and time-dependant flowrates, pressures, temperatures, and concentrations in a complex flow network. The program employs a finite volume formulation of mass, momentum and energy conservation equations in conjunction with the thermodynamic equation of state of real fluids. GFSSP was used to calculate the axial thrust and internal flow distribution of the Fastrac engine turbopump during the start and shut down transients. The models discussed in this paper use boundary conditions that were extracted from turbopump test data. The GFSSP predicted turbopump secondary flow passage pressures and temperatures were compared with actual measured values.

VanHooser, Katherine↗
NASA NTRS1985

Broadening of looplike solar coronal transients

The broadening of the tops of nine outwardly expanding looplike coronal mass-ejection transients observed during 1973-1974 and 1980 has been examined. Five of the nine transients exhibit increased breadth with time (height); although the rates vary widely, no event shows an increase which can be fitted by a power-law form with a greater-than-linear increase with height. The breadth of four events decreases with height. When all nine events are considered together, the transient breadth with height is fitted with an expression h varies as R exp 0.48 with large scatter. In addition, measurements of the total observed loop length of the nine transients show that this length L varies as R exp 1.30. Both of these results are contrary to the predictions of one model of loop expulsion as a result of an assumed azimuthal magnetic field gradient. Finally, when combined with the facts that looplike mass ejections are usually associated with the occurrence of eruptive prominences, and that such mass ejections are generally accelerated through the corona, it is found that the observed variation of transient breadth with height contradicts some characteristics of self-similar fluid flow which have been ascribed to mass-ejection transients.

Macqueen, R. M.↗
NASA NTRS1980

On the performance of explicit and implicit algorithms for transient thermal analysis

The status of an effort to increase the efficiency of calculating transient temperature fields in complex aerospace vehicle structures is described. The advantages and disadvantages of explicit and implicit algorithms are discussed. A promising set of implicit algorithms, known as the GEAR package is described. Four test problems, used for evaluating and comparing various algorithms, have been selected and finite element models of the configurations are discribed. These problems include a space shuttle frame component, an insulated cylinder, a metallic panel for a thermal protection system and a model of the space shuttle orbiter wing. Calculations were carried out using the SPAR finite element program, the MITAS lumped parameter program and a special purpose finite element program incorporating the GEAR algorithms. Results generally indicate a preference for implicit over explicit algorithms for solution of transient structural heat transfer problems when the governing equations are stiff. Careful attention to modeling detail such as avoiding thin or short high-conducting elements can sometimes reduce the stiffness to the extent that explicit methods become advantageous.

Adelman, H. M.↗
NASA NTRS1992

Transient liquid phase diffusion bonding of Udimet 720 for Stirling power converter applications

Udimet 720 has been selected for use on Stirling power converters for space applications. Because Udimet 720 is generally considered susceptible to strain age cracking if traditional fusion welding is used, other joining methods are being considered. A process for transient liquid phase diffusion bonding of Udimet 720 has been theoretically developed in an effort to eliminate the strain age crack concern. This development has taken into account such variables as final grain size, joint homogenization, joint efficiency related to bonding aid material, bonding aid material application method, and thermal cycle.

Mittendorf, Donald L.↗
NASA NTRS1986

A numerical and experimental investigation of electrothermal aircraft deicing

Experimental data were obtained for the deicing characteristics of a stationary UH-1H helicopter blade which had been fitted with an electrothermal deicer assembly. The tests were run in the NASA Lewis Icing Research Tunnel, and yielded transient temperature responses for the substrate, heater and abrasion shield at selected positions around the blade. The data at the abrasion shield-ice interface clearly documented when melting, shedding or refreezing occurred. Comparisons were made between the experimental data and a one-dimensional numerical model. The agreement was generally very good, with the simulations being shown to be capable of predicting the transient temperature responses along with phase change and ice shedding. At many blade positions, the model was capable of accurately simulating the thermal response of the electrothermal deicer assembly.

Leffel, K.↗
NASA NTRS2000

Observed Changes in the Gravity Field of Mars Due to Seasonal Atmospheric Processes

The atmosphere of Mars deposits approximately 30% of its mass at the winter pole as part of its seasonal cycle of CO2 exchange and sublimes it back to the atmosphere in the spring, thus creating an annual hemispheric cycle of mass re-distribution. Using X-band tracking data of the Mars Global Surveyor (MGS) spacecraft, we have detected the signature of changes in the low degree gravity field from March 1999 through August 2000, corresponding to about three-quarters of a Martian year. The observed variations show a general resemblance to predicted variations from general circulation models. Also observed are irregular changes that appear to be due to transient phenomena in the Martian atmosphere such as large dust storms that provide significant heat into the lower atmosphere, even in the polar regions. In addition, we have identified a change in the rate of rotation of Mars over this same period that appears somewhat smaller than anticipated, but in general agreement with general circulation models.

Smith, David E.↗
NASA NTRS1977

Experimental evaluation of a breadboard heat and product-water removal system for a space-power fuel cell designed with static water removal and evaporative cooling

A test program was conducted to evaluate the design of a heat and product-water removal system to be used with fuel cell having static water removal and evaporative cooling. The program, which was conducted on a breadboard version of the system, provided a general assessment of the design in terms of operational integrity and transient stability. This assessment showed that, on the whole, the concept appears to be inherently sound but that in refining this design, several facets will require additional study. These involve interactions between pressure regulators in the pumping loop that occur when they are not correctly matched and the question of whether an ejector is necessary in the system.

Hagedorn, N. H.↗
NASA NTRS1980

The use of the principle of superposition in measuring and predicting the thermal characteristics of an electronic equipment operated in a space environment

The advantages and possible pitfalls of using a generalized method of measuring and, based on these measurements, predicting the transient or steady-state thermal response characteristics of an electronic equipment designed to operate in a space environment are reviewed. The method requires generation of a set of thermal influence coefficients by test measurement in vacuo. A implified thermal mockup isused in this test. Once this data set is measured, temperatures resulting from arbitrary steady-state or time varying power profiles can be economically calculated with the aid of a digital computer.

Gale, E. H.↗
NASA NTRS1982

Development of mixed time partition procedures for thermal analysis of structures

The computational methods used to predict and optimize the thermal-structural behavior of aerospace vehicle structures are reviewed. In general, two classes of algorithms, implicit and explicit, are used in transient thermal analysis of structures. Each of these two methods has its own merits. Due to the different time scales of the mechanical and thermal responses, the selection of a time integration method can be a difficult yet critical factor in the efficient solution of such problems. Therefore mixed time integration methods for transient thermal analysis of structures are being developed. This proposed methodology would be readily adaptable to existing computer programs for structural thermal analysis.

Liu, W. K.↗
NASA NTRS1985

Vacillations induced by interference of stationary and traveling waves

It was shown that there exists a correspondence between interference of the 16-day wave with the stationary planetary wave and vacillations in eddy heat and momentum fluxes. There has been speculation on the role such interference may play in stratospheric warmings. The appearance of higher-order normal modes, e.g., the 16-day wave, prior to disturbances in the stratospheric vortex has also been noted. Since amplitudes of the 16-day wave are compared to those of the stationary component, it can significantly alter the instantaneous total wave field. The behavior of the wave number 1 height field at 60 deg N during January 1979 is shown when a large amplitude disturbance retrogressed barotropically around the globe over much of the troposphere and stratosphere. This transient disturbance has been identified with the 16-day wave. More generally, the presence of fluctuating planetary wave activity can, through combined interference, alter the instantaneous planetary wave field as well as the transports it produces. The implications of such interference in a quasi-geostrophic framework has been explored, using the Eliassen-Palm (EP) flux as a diagnostic.

Salby, M. L.↗
NASA NTRS1987

A new method to predict unsteady aeroelastic behavior

A new method for predicting subsonic flutter and static deflections, including divergence, has been developed. The present method accounts for aspect ratio and, in the case of flutter, static deflections. The angle of attack is limited only by the occurrence of stall or vortex bursting near the wing. The innovation in the present method is to integrate simultaneously and interactively the equations of motion of the structure and the flowfield. The present approach employs an iterative scheme based on the predictor-corrector method. The general unsteady vortex-lattice method (UVLM) is used to predict the aerodynamic loads. Because the UVLM predicts the wakes as part of the solution, the history of the motion is taken into account; hysteresis is predicted. The deflection (for both bending and torsion) is expressed as an expansion in terms of the free-vibration modes. The time-dependent coefficients in these expansions serve as the generalized coordinates. Numerical examples illustrating the calculation of static deflections and transient dynamic responses above and below the flutter boundary are included.

Strganac, Thomas W.↗
NASA NTRS1990

Modeling of Space Station electric power system with EMTP

The authors provide an introduction to using the electromagnetic transients (EMTP) program to model aerospace power system components. A brief general overview of EMTP is presented. The modeling of the dc/dc converter unit in the space station electric power system is described as an illustration.

Tam, Kwa-Sur↗
NASA NTRS1992

Computation of magnetic suspension of maglev systems using dynamic circuit theory

Dynamic circuit theory is applied to several magnetic suspensions associated with maglev systems. These suspension systems are the loop-shaped coil guideway, the figure-eight-shaped null-flux coil guideway, and the continuous sheet guideway. Mathematical models, which can be used for the development of computer codes, are provided for each of these suspension systems. The differences and similarities of the models in using dynamic circuit theory are discussed in the paper. The paper emphasizes the transient and dynamic analysis and computer simulation of maglev systems. In general, the method discussed here can be applied to many electrodynamic suspension system design concepts. It is also suited for the computation of the performance of maglev propulsion systems. Numerical examples are presented in the paper.

He, J. L.↗
NASA NTRS1999

Integrated Modeling Tools for Thermal Analysis and Applications

Integrated modeling of spacecraft systems is a rapidly evolving area in which multidisciplinary models are developed to design and analyze spacecraft configurations. These models are especially important in the early design stages where rapid trades between subsystems can substantially impact design decisions. Integrated modeling is one of the cornerstones of two of NASA's planned missions in the Origins Program -- the Next Generation Space Telescope (NGST) and the Space Interferometry Mission (SIM). Common modeling tools for control design and opto-mechanical analysis have recently emerged and are becoming increasingly widely used. A discipline that has been somewhat less integrated, but is nevertheless of critical concern for high precision optical instruments, is thermal analysis and design. A major factor contributing to this mild estrangement is that the modeling philosophies and objectives for structural and thermal systems typically do not coincide. Consequently the tools that are used in these discplines suffer a degree of incompatibility, each having developed along their own evolutionary path. Although standard thermal tools have worked relatively well in the past. integration with other disciplines requires revisiting modeling assumptions and solution methods. Over the past several years we have been developing a MATLAB based integrated modeling tool called IMOS (Integrated Modeling of Optical Systems) which integrates many aspects of structural, optical, control and dynamical analysis disciplines. Recent efforts have included developing a thermal modeling and analysis capability, which is the subject of this article. Currently, the IMOS thermal suite contains steady state and transient heat equation solvers, and the ability to set up the linear conduction network from an IMOS finite element model. The IMOS code generates linear conduction elements associated with plates and beams/rods of the thermal network directly from the finite element structural model. Conductances for temperature varying materials are accommodated. This capability both streamlines the process of developing the thermal model from the finite element model, and also makes the structural and thermal models compatible in the sense that each structural node is associated with a thermal node. This is particularly useful when the purpose of the analysis is to predict structural deformations due to thermal loads. The steady state solver uses a restricted step size Newton method, and the transient solver is an adaptive step size implicit method applicable to general differential algebraic systems. Temperature dependent conductances and capacitances are accommodated by the solvers. In addition to discussing the modeling and solution methods. applications where the thermal modeling is "in the loop" with sensitivity analysis, optimization and optical performance drawn from our experiences with the Space Interferometry Mission (SIM), and the Next Generation Space Telescope (NGST) are presented.

Milman, Mark H.↗
NASA NTRS2004

Generalized Fluid System Simulation Program

A general purpose program implemented on a computer analyzes steady state and transient flow in a complex fluid network, modeling phase changes, compressibility, mixture thermodynamics and external body forces such as gravity and centrifugal force. A preprocessor provides for the inter- active development of a fluid network simulation having nodes and branches. Mass, energy, and specie conservation equations are solved at the nodes, and momentum conservation equations are solved in the branches. Contained herein are subroutines for computing "real fluid" thermodynamic and thermophysical properties for 12 fluids, and a number of different source options are provided for model- ing momentum sources or sinks in the branches. The system of equations describing the fluid network is solved by a hybrid numerical method that is a combination of the Newton-Raphson and successive substitution methods. Application and verification of this invention are provided through an example problem, which demonstrates that the predictions of the present invention compare most reasonably with test data.

Alok Kumar Majumdar↗
NASA NTRS2001

Transient Reliability Analysis Capability Developed for CARES/Life

The CARES/Life software developed at the NASA Glenn Research Center provides a general-purpose design tool that predicts the probability of the failure of a ceramic component as a function of its time in service. This award-winning software has been widely used by U.S. industry to establish the reliability and life of a brittle material (e.g., ceramic, intermetallic, and graphite) structures in a wide variety of 21st century applications.Present capabilities of the NASA CARES/Life code include probabilistic life prediction of ceramic components subjected to fast fracture, slow crack growth (stress corrosion), and cyclic fatigue failure modes. Currently, this code can compute the time-dependent reliability of ceramic structures subjected to simple time-dependent loading. For example, in slow crack growth failure conditions CARES/Life can handle sustained and linearly increasing time-dependent loads, whereas in cyclic fatigue applications various types of repetitive constant-amplitude loads can be accounted for. However, in real applications applied loads are rarely that simple but vary with time in more complex ways such as engine startup, shutdown, and dynamic and vibrational loads. In addition, when a given component is subjected to transient environmental and or thermal conditions, the material properties also vary with time. A methodology has now been developed to allow the CARES/Life computer code to perform reliability analysis of ceramic components undergoing transient thermal and mechanical loading. This means that CARES/Life will be able to analyze finite element models of ceramic components that simulate dynamic engine operating conditions. The methodology developed is generalized to account for material property variation (on strength distribution and fatigue) as a function of temperature. This allows CARES/Life to analyze components undergoing rapid temperature change in other words, components undergoing thermal shock. In addition, the capability has been developed to perform reliability analysis for components that undergo proof testing involving transient loads. This methodology was developed for environmentally assisted crack growth (crack growth as a function of time and loading), but it will be extended to account for cyclic fatigue (crack growth as a function of load cycles) as well.

Nemeth, Noel N.↗
NASA NTRS1981

Prediction and experimental verification of transient airfoil motion in a small wind tunnel

The theory for aerodynamic loading associated with transient motion of an airfoil in a wind tunnel has been extended and verified experimentally. A generalized Theodorsen Function which includes wall effects is described, and finite-state approximations are developed for large wing-semichord to wall-spacing ratios. Finally, experimental results are presented which verify the theoretical predictions for transient airfoil motions. These results were obtained using a small, low-subsonic wind tunnel with a unique airfoil suspension design that provides uncoupled sensing and actuation for two degrees of freedom.

Rock, S. M.↗