Search NASA⌕ Search

SEARCH · Search NASA

Results for “high spatiotemporal resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Remote Sensing Approach for Monitoring Tree Health Adjacent to Transmission Corridors

This study presents an initial proof-of-concept for a satellite-based remote sensing approach to identify and monitor potential areas of poor tree health across the entire BPA service territory on an annual basis. We tested three variants of “delta peak NDVI” ( ΔPN ) change detection metrics that express interannual variation in primary productivity relative to a baseline by comparing ΔPN values for known insect/disease disturbances and nearby reference locations. All three metrics showed promise for detecting poor tree health in the year during disturbance, but the metric based on the difference from the long-term (2016-2024) median ( Δ Med PN ) was preferred due to its responsiveness to change in the years during and after disturbance, resilience to interannual variation, and ease of interpretation as being above or below normal. Comparison of Δ Med PN grouped by relative severity of disturbance indicated it was not sensitive enough to detect “low” severity disturbances, as mapped by USGS’s LANDFIRE program, but could distinguish “moderate” and “high” severity disturbances from reference locations. These findings informed selection of a threshold for Δ Med PN , which was combined with areas exhibiting negative NDVI to map potential areas of concern. Visual inspection of before/after high-resolution imagery and NDVI time series showed that many areas of concern aligned with visible signs of defoliation and die-off as well as other types of disturbance (e.g., landslides, logging, road grading, flooding). Some areas of concern are thought to be false detections caused by persistent shadow, and some could not be explained with visual inspection due to spatiotemporal limitations of before/after imagery. In summary, our approach shows promise for large-scale monitoring of tree health adjacent to BPA transmission lines, but additional work is recommended to improve model sophistication and remove noise.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Progress Towards a Predictive Eagle Behavior and Risk Modeling Framework: Overview and Recent Validation Efforts

This presentation summarizes progress to date of the U.S. Department of Energy project, "Development of a computational framework for modeling golden eagles (Aquila chrysaetos) near wind farms," which focuses on stochastic behavioral modeling of soaring raptors across landscape, facility, and turbine spatiotemporal scales. This publicly available, open-source modeling framework includes behavioral models based on three different underlying principles: energy minimization at landscape scale, behavioral heuristics at landscape-facility scale, and data-driven behaviors at the facility-micro-scale. We will briefly overview the key advancements in the behavioral modeling state of the art, which leverages multiple high-resolution telemetry data sources combined with high-fidelity atmospheric flow modeling insights. We then present preliminary results from a validation study in Altamont, California. This new study involves a novel application of the Stochastic Soaring Raptor Simulator (SSRS), in a new geographic locale, to understand facility scale eagle movement patterns over time scales representative of a wind project's lifetime. For this desktop analysis (that does not depend on any high-performance computing resources), SSRS simultaneously considers a variety of wind conditions and eagle approach vectors toward a project site of interest. This work demonstrates the integration of publicly available landscape-scale atmospheric datasets, our recently improved engineering updraft models (see presentation from Thedin et al.), and our energy minimization behavioral models within the SSRS framework. While we only present results from a single behavioral model, the integration of these three modeling components forms the foundation for our more sophisticated behavioral models (see presentations from Brandes et al., Sandhu et al.) that are under active development. Results are presented in the form of presence maps, which may be applied to estimate risk to wildlife, augment ground survey data, inform wind-plant operations, or incorporated into wind-plant designs.

agent-based modeling↗

Spatio-Kinetic Electronic Heterogeneity in MoS 2 Revealed by Ultrafast Electron Microscopy: Implications for Optoelectronics

There is broad interest in layered, two-dimensional (2D) semiconductors owing to their high optical absorption and ability to heterogeneously integrate with various substrates. In such layered semiconductors, mesoscopic imperfections, such as surface step edges, may affect charge carrier kinetics and device performance, but studying their effects on carrier transport with sufficient spatial and temporal resolution is a challenge. Using scanning ultrafast electron microscopy, we image the near-surface charge carrier kinetics with μm/ps spatiotemporal resolution in single-crystal MoS 2 samples with surface steps tens of nanometers in height. We find an approximately 3-fold increase in surface trap density near such surface steps compared to the uniform, flat surface regions. Despite the difference in trap state density, filling of the traps occurs over the same time scale (∼100 ps), but carrier recovery is much slower near the step compared to the uniform regions of the material. Furthermore, these results provide an approach to measure ultrafast dynamics and determine the required uniformity of layered materials depending on the speed limit constraints for specific applications.

SEM↗

Assessment of Tropospheric Concentrations of NO2 from the TROPOMI/Sentinel-5 Precursor for the Estimation of Long-Term Exposure to Surface NO2 over South Korea

Since April 2018, the TROPOspheric Monitoring Instrument (TROPOMI) has provided data on tropospheric NO2 column concentrations (CTROPOMI) with unprecedented spatial resolution. This study aims to assess the capability of TROPOMI to acquire high spatial resolution data regarding surface NO2 mixing ratios. In general, the instrument effectively detected major and moderate sources of NO2 over South Korea with a clear weekday–weekend distinction. We compared the CTROPOMI with surface NO2 mixing ratio measurements from an extensive ground-based network over South Korea operated by the Korean Ministry of Environment (SKME; more than 570 sites), for 2019. Spatiotemporally collocated CTROPOMI and SKME showed a moderate correlation (correlation coefficient, r = 0.67), whereas their annual mean values at each site showed a higher correlation (r = 0.84). The CTROPOMI and SKME were well correlated around the Seoul metropolitan area, where significant amounts of NO2 prevailed throughout the year, whereas they showed lower correlation at rural sites. We converted the tropospheric NO2 from TROPOMI to the surface mixing ratio (STROPOMI) using the EAC4 (ECMWF Atmospheric Composition Reanalysis 4) profile shape, for quantitative comparison with the SKME. The estimated STROPOMI generally underestimated the in-situ value obtained, SKME (slope = 0.64), as reported in previous studies.

TROPOMI↗

Turbo‐charging crop improvement: harnessing multiplex editing for polygenic trait engineering and beyond

Multiplex CRISPR editing has emerged as a transformative platform for plant genome engineering, enabling the simultaneous targeting of multiple genes, regulatory elements, or chromosomal regions. This approach is effective for dissecting gene family functions, addressing genetic redundancy, engineering polygenic traits, and accelerating trait stacking and de novo domestication. Its applications now extend beyond standard gene knockouts to include epigenetic and transcriptional regulation, chromosomal engineering, and transgene‐free editing. These capabilities are advancing crop improvement not only in annual species but also in more complex systems such as polyploids, undomesticated wild relatives, and species with long generation times. At the same time, multiplex editing presents technical challenges, including complex construct design and the need for robust, scalable mutation detection. We discuss current toolkits and recent innovations in vector architecture, such as promoter and scaffold engineering, that streamline workflows and enhance editing efficiency. High‐throughput sequencing technologies, including long‐read platforms, are improving the resolution of complex editing outcomes such as structural rearrangements—often missed by standard genotyping—when targeting repetitive or tandemly spaced loci. To fully realize the potential of multiplex genome engineering, there is growing demand for user‐friendly, synthetic biology‐compatible, and scalable computational workflows for gRNA design, construct assembly, and mutation analysis. Experimentally validated inducible or tissue‐specific promoters are also highly desirable for achieving spatiotemporal control. As these tools continue to evolve, multiplex CRISPR editing is poised to become a foundational technology of next‐generation crop improvement to address challenges in agriculture, sustainability, and climate resilience.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of CLARA-A2 and ISCCP-H Cloud Cover Climate Data Records over Europe with ECA&D Ground-Based Measurements

Clouds are of high importance for the climate system but they still remain one of its principal uncertainties. Remote sensing techniques applied to satellite observations have assisted tremendously in the creation of long-term and homogeneous data records; however, satellite data sets need to be validated and compared with other data records, especially ground measurements. In the present study, the spatiotemporal distribution and variability of Total Cloud Cover (TCC) from the Satellite Application Facility on Climate Monitoring (CM SAF) Cloud, Albedo And Surface Radiation dataset from AVHRR data—edition 2 (CLARA-A2) and the International Satellite Cloud Climatology Project H-series (ISCCP-H) is analyzed over Europe. The CLARA-A2 data record has been created using measurements of the Advanced Very High Resolution Radiometer (AVHRR) instrument onboard the polar orbiting NOAA and the EUMETSAT MetOp satellites, whereas the ISCCP-H data were produced by a combination of measurements from geostationary meteorological satellites and the AVHRR instrument on the polar orbiting satellites. An intercomparison of the two data records is performed over their common period, 1984 to 2012. In addition, a comparison of the two satellite data records is made against TCC observations at 22 meteorological stations in Europe, from the European Climate Assessment & Dataset (ECA&D). The results indicate generally larger ISCCP-H TCC with respect to the corresponding CLARA-A2 data, in particular in the Mediterranean. Compared to ECA&D data, both satellite datasets reveal a reasonable performance, with overall mean TCC biases of 2.1 and 5.2% for CLARA-A2 and ISCCP-H, respectively. This, along with the higher correlation coefficients between CLARA-A2 and ECA&D TCC, indicates the better performance of CLARA-A2 TCC data.

Tzallas, Vasileios↗

Scaling Arctic landscape and permafrost features improves active layer depth modeling

Tundra ecosystems in the Arctic store up to 40% of global below-ground organic carbon but are exposed to the fastest climate warming on Earth. However, accurately monitoring landscape changes in the Arctic is challenging due to the complex interactions among permafrost, micro-topography, climate, vegetation, and disturbance. This complexity results in high spatiotemporal variability in permafrost distribution and active layer depth (ALD). Moreover, these key tundra processes interact at different scales, and an observational mismatch can limit our understanding of intrinsic connections and dynamics between above and below-ground processes. Consequently, this could limit our ability to model and anticipate how ALD will respond to climate change and disturbances across tundra ecosystems. In this paper, we studied the fine-scale heterogeneity of ALD and its connections with land surface characteristics across spatial and spectral scales using a combination of ground, unoccupied aerial system, airborne, and satellite observations. We showed that airborne sensors such as AVIRIS-NG and medium-resolution satellite Earth observation systems like Sentinel-2 can capture the average ALD at the landscape scale. We found that the best observational scale for ALD modeling is heavily influenced by the vegetation and landform patterns occurring on the landscape. Landscapes characterized by small-scale permafrost features such as polygon tussock tundra require high-resolution observations to capture the intrinsic connections between permafrost and small-scale land surface and disturbance patterns. Conversely, in landscapes dominated by water tracks and shrubs, permafrost features manifest at a larger scale and our model results indicate the best performance at medium resolution (5 m), outperforming both higher (0.4 m) and lower resolution (10 m) models. This transcends our study to show that permafrost response to climate change may vary across dominant ecosystem types, driven by different above- and below-ground connections and the scales at which these connections are happening. We thus recommend tailoring observational scales based on landforms and characteristics for modeling permafrost distribution, thereby mitigating the influences of spatial-scale mismatches and improving the understanding of vegetation and permafrost changes for the Arctic region.

54 ENVIRONMENTAL SCIENCES↗

Final technical report for DE-SC0022255: Discovering Physically Meaningful Structures from Climate Extreme Data

The past two decades have witnessed natural disasters and extreme weather events that affect millions of people. At the same time, the data volume from high-resolution climate models, satellite, in-situ and ground-based measurements have substantially increased to petabyte scales. These new and readily accessible datasets create the previously missing pipeline required for scientific machine learning (ML) and therefore new opportunities for improved understanding and prediction capability of climate extreme events. This project developed a deep latent variable model framework to discover physically meaningful hidden structures from high-dimensional, spatiotemporal climate extreme data.

97 MATHEMATICS AND COMPUTING↗

Deriving a Suite of Climate Data Records from 21-years of Sounder Observations

Two retrieval algorithms, a Single Field-of-view Sounder Atmospheric Product (SiFSAP) Level 2 algorithm and a Climate Fingerprinting Sounder Product (ClimFiSP) Level 3 algorithm, have been developed at NASA Langley Research Center. In this presentation, we will demonstrate the radiance closure build into these two algorithms. This is possible due to the use of a principal-component-based radiative transfer model (PCRTM). The PCRTM enables the inclusion of all available spectral information from hyperspectral IR sounders. It also has fast and accurate capability of modeling observed cloudy radiance spectra directly. The SiFSAP, which fits sounder radiance spectra using PCRTM as forward model and an optimal estimation as inverse model, has 3-times higher spatial resolution and 9-times denser data products comparing to current NASA and NOAA operational IR sounder products. With great support from NASA sounder SIPS, the SiFSAP algorithm has been delivered to NASA GES DISC for L2 and L3 data generation and releasing. The ClimFiSP uses a spectral fingerprinting method to directly generate L3 data products from spatiotemporally averaged L1 data. The goal of ClimFiSP is to generate high-quality climate data records (CDRs) from multiple IR sounders (e.g. Aqua AIRS, SNPP CrIS, NOAA-20 and NOAA-21 CrIS) using a consistent retrieval methodology. Using CHIRP L1 data, we have generated 20-years of CDRs for atmospheric temperature, water vapor, and trace gas profiles, as well as cloud and surface properties. The algorithm will be transitioned to Sounder SIPS soon and eventually to NASA GES DISC.

Xu Liu↗

Understanding processes that control dust spatial distributions with global climate models and satellite observations

Dust aerosol is important in modulating the climate system at local and global scales, yet its spatiotemporal distributions simulated by global climate models (GCMs) are highly uncertain. In this study, we evaluate the spatiotemporal variations of dust extinction profiles and dust optical depth (DOD) simulated by the Community Earth System Model version 1 (CESM1) and version 2 (CESM2), the Energy Exascale Earth System Model version 1 (E3SMv1), and the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2) against satellite retrievals from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), Moderate Resolution Imaging Spectroradiometer (MODIS), and Multi-angle Imaging SpectroRadiometer (MISR). We find that CESM1, CESM2, and E3SMv1 underestimate dust transport to remote regions. E3SMv1 performs better than CESM1 and CESM2 in simulating dust transport and the northern hemispheric DOD due to its higher mass fraction of fine dust. CESM2 performs the worst in the Northern Hemisphere due to its lower dust emission than in the other two models but has a better dust simulation over the Southern Ocean due to the overestimation of dust emission in the Southern Hemisphere. DOD from MERRA-2 agrees well with CALIOP DOD in remote regions due to its higher mass fraction of fine dust and the assimilation of aerosol optical depth. The large disagreements in the dust extinction profiles and DOD among CALIOP, MODIS, and MISR retrievals make the model evaluation of dust spatial distributions challenging. Our study indicates the importance of representing dust emission, dry/wet deposition, and size distribution in GCMs in correctly simulating dust spatiotemporal distributions.

54 ENVIRONMENTAL SCIENCES↗

The Dawn of Geostationary Air Quality Monitoring: Case Studies from Seoul and Los Angeles

With the near-future launch of geostationary pollution monitoring satellite instruments over North America, East Asia, and Europe, the air quality community is preparing for an integrated global atmospheric composition observing system at unprecedented spatial and temporal resolutions. One of the ways that NASA has supported this community preparation is through demonstration of future space-borne capabilities using the Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) airborne instrument. This paper integrates repeated high-resolution maps from GeoTASO, ground-based Pandora spectrometers, and low Earth orbit measurements from the Ozone Mapping and Profiler Suite (OMPS), for case studies over two metropolitan areas: Seoul, South Korea on June 9, 2016 and Los Angeles, California on June 27, 2017. This dataset provides a unique opportunity to illustrate how geostationary air quality monitoring platforms and ground-based remote sensing networks will close the current spatiotemporal observation gap. GeoTASO observes large differences in diurnal behavior between these urban areas, with NO2 accumulating within the Seoul Metropolitan Area through the day but NO2 peaking in the morning and decreasing throughout the afternoon in the Los Angeles Basin. In both areas, the earliest morning maps exhibit spatial patterns similar to emission source areas (e.g., urbanized valleys, roadways, major airports). These spatial patterns change later in the day due to boundary layer dynamics, horizontal transport, and chemistry. The nominal resolution of GeoTASO is finer than will be obtained from geostationary platforms, but when NO2 data over Los Angeles are up-scaled to the expected resolution of TEMPO, spatial features discussed are conserved. Pandora instruments installed in both metropolitan areas capture the diurnal patterns observed by GeoTASO, continuously and over longer time periods, and will play a critical role in validation of the next generation of satellite measurement. These case studies demonstrate that different regions can have diverse diurnal patterns and that day-to-day variability due to meteorology or anthropogenic patterns such as weekday/weekend variations in emissions is large. Low Earth orbit measurements, despite their inability to capture the diurnal patterns at fine spatial resolution, will be essential for intercalibrating the geostationary radiances and cross-validating the geostationary retrievals in an integrated global observing system.

Geostationary↗

Recovery: Fast and Slow—Vegetation Response During the 2012–2016 California Drought

The 2012–2016 California Drought severely impacted natural vegetation across a wide range of environmental gradient. Although several studies have reported an increase in plant water stress and mortality, the spatiotemporal variations of ecosystem productivity responses and the associated environmental and biological drivers remain unclear. Here, using Enhanced Vegetation Index from the Moderate resolution imaging spectrometer, we found that 45% of the natural ecosystems showed an abrupt change (breakpoint [BP]) in productivity during 2012–2016. There were three major contrasting temporal patterns of productivity responses: (i) a steady increase under higher temperature followed by a decline due to accumulated moisture depletion (high elevation forest) or temperature decrease (high elevation nonforest), (ii) gradual decline during the drought followed by a rapid recovery within 1 year after drought stress was partially relieved, and (iii) both a gradual decline and an abrupt decline. The magnitude of abrupt changes was negatively correlated (r = −0.80, p < 0.001) with initial gradual changes. Overall, changes during BP offset, on average, 57% of the preceding gradual responses. The spatial variability in ecosystem response patterns is driven by both environmental and biological factors. Particularly, for forests, positive BP was driven by increasing rainfall and decreasing temperature, while negative BP was mainly driven by the precipitation anomaly. By 2019, 33% of the natural vegetation have recovered to the level of EVI in 2010. Ecosystem responses to multiyear droughts can influence ecosystem dynamics in a complex pattern. Multiple ecohydrological factors should be considered to understand and predict the long-term drought impacts on ecosystems.

Xi Yang↗

Influence of the Kuroshio Intrusion on Deep Flow Intraseasonal Variability in the Northern South China Sea

Abstract Interactions between the open ocean and marginal seas have been suggested to be critical to the redistribution and dissipation of global energy. Here, we propose a mechanism for the upper open ocean influencing the deep flow in marginal seas that hinges on the formation and propagation of topographic Rossby waves (TRWs). Observations and high‐resolution simulations suggest substantial intraseasonal variability with periods of 5–60 days associated with the deep flow over continental slopes of the northern South China Sea (NSCS). These fluctuations generally account for over 40% of the total deep kinetic energy variability and the number can reach 70% over the slopes to the west of the Luzon Strait, southwest of the Dongsha Islands, and northeast of the Xisha Islands. By examining the spatiotemporal features of the fluctuations, we demonstrate that the intraseasonal variability of the deep flow in the NSCS is closely associated with TRWs. Using a recently developed multiscale energetics analysis in combination with a ray tracing model, we show that the energy sources of TRWs can be traced back to the east of the Dongsha Islands, where the Kuroshio intrusion and related eddies energize the TRWs primarily through pressure work. These waves propagate westward across the NSCS and drive the intraseasonal variability of the deep flow over continental slopes. Our findings highlight an energy pathway from the open ocean western boundary current to the abyssal marginal sea that could modulate regional circulation as well as exchanges between major ocean basins.

Quan, Qi↗

Long-term hydro-economic analysis tool for evaluating global groundwater cost and supply: Superwell v1.1

Abstract. Groundwater plays a key role in meeting water demands, supplying over 40 % of irrigation water globally, with this role likely to grow as water demands and surface water variability increase. A better understanding of the future role of groundwater in meeting sectoral demands requires an integrated hydro-economic evaluation of its cost and availability. Yet substantial gaps remain in our knowledge and modeling capabilities related to groundwater availability, recharge, feasible locations for extraction, extractable volumes, and associated extraction costs, which are essential for large-scale analyses of integrated human–water system scenarios, particularly at the global scale. To address these needs, we developed Superwell, a physics-based groundwater extraction and cost accounting model that operates at sub-annual temporal and at the coarsest 0.5° (≈50 km × 50 km) gridded spatial resolution with global coverage. The model produces location-specific groundwater supply–cost curves that provide the levelized cost to access different quantities of available groundwater. The inputs to Superwell include recent high-resolution hydrogeologic datasets of permeability, porosity, aquifer thickness, depth to water table, recharge, and hydrogeological complexity zones. It also accounts for well capital and maintenance costs, as well as the energy costs required to lift water to the surface. The model employs a Theis-based scheme coupled with an amortization-based cost accounting formulation to simulate groundwater extraction and quantify the cost of groundwater pumping. The result is a spatiotemporally flexible, physically realistic, economics-based model that produces groundwater supply–cost curves. We show examples of these supply–cost curves and the insights that can be derived from them across a set of scenarios designed to explore model outcomes. The supply–cost curves produced by the model show that most (90 %) nonrenewable groundwater in storage globally is extractable at costs lower than USD 0.57 m−3, while half of the volume remains extractable at under USD 0.108 m−3. The global unit cost is estimated to range from a minimum of USD 0.004 m−3 to a maximum of USD 3.971 m−3. We also demonstrate and discuss examples of how these cost curves could be used by linking Superwell's outputs with other models to explore coupled human–environmental system challenges, such as water resources planning and management, or broader analyses of multisectoral feedbacks.

Global Change Analysis Model (GCAM)↗

Spatiotemporal Characterization of Droughts and Vegetation Response in Northwest Africa From 1981 to 2020

Drought has become one of the most devastating natural risks of agricultural production and the environment in almost all climate regions. Thus, understanding the spatiotemporal characteristics of drought and its associated impacts is crucial in drought early warning management and adaptation efforts. In this study, we used the 3-month Standardized Precipitation Index (SPI-3) obtained from Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) to investigate the space–time characteristics of drought conditions. Also, this study examined the impact of the SPI-based drought on vegetation health conditions using the Advanced Very High Resolution Radiometer (AVHRR) Normalized Difference Vegetation Index (NDVI) time-series data from 1981 to 2020. The results revealed that the region experiences drought primarily between July and September, with the most prolonged drought events lasting up to five months. Morocco suffered from more frequent droughts than other countries in the region. The Mann-Kendall test showed that the trend of drought became drier over the last decade, whereas the period from 1981 to 2010 witnessed either wetting or no trends. This study also found that the response of crops and grasslands showed higher correlation with the SPI-3 and that the response of vegetation to droughts was higher during the dry season. The findings of this study provide useful information to support local and regional drought planning and adaptation programs and enhance the understanding of drought development in the region.

Nguyen Quang Thi↗

Correlated Spatiotemporal Evolution of Extreme-Ultraviolet Ribbons and Hard X-rays in a Solar Flare

We study the structure and evolution of solar flare ribbons in the chromosphere to infer properties of magnetic reconnection that occurs in the corona. We analyze the imaging observations of the M7.3 SOL2014-04-18T13 flare obtained by IRIS in both the near and far ultraviolet passbands and by SDO/AIA in the 1600A passband. Two flare ribbons are observed to spread away from the magnetic polarity inversion line as the flare progresses. Using the high-resolution IRIS observations, we measure the width of the newly brightened ribbon front along the extension of the ribbon, which maps the feet of magnetic field lines reconnecting in the current sheet in the corona. We find that the width of the ribbon front is highly structured, possibly reflecting corresponding structure in the coronal current layer. Further the ribbon grows most rapidly with time in regions where non-thermal hard X-ray (HXR) emission is concentrated (Brosius, et al. 2015). The light curve of the ultraviolet emissions in this region, as measured by IRIS and AIA, also well matches the HXR light curve at photon energies above 25 keV. In contrast, the ribbon-width evolution and light curves in other regions along the ribbons do not correlate well with the HXR emission. These results suggest that there is a strong connection between the production of non-thermal electrons and locally enhanced perpendicular extent of flare ribbon fronts, which reflect the inhomogeneous structure and/or reconnection dynamics of the flare current sheet in the corona.

Stephen Naus↗

Generation of Land Surface Reflectance with Combined Geo-KOMPSAT-2A AMI and Himawari 8 AHI Observations

The latest generation of geostationary satellites has opened a new era of Earth observations with unprecedented spatiotemporal resolution and spectral range. Together with GOES 16/17 ABI, FY4-A AGRI, and Himawari-8 AHI, a new Korean geostationary satellite (Geo-KOMPSAT-2A AMI) has operationally collected a full-disk image in 16 channels every ten minutes since July 2019, allowing diurnal land surface monitoring over a large proportion of Asia and all of Oceania. Retrieving accurate surface reflectance (SR) over land from GK-2A/AMI is a challenging but high priority objective. One of the challenges is the absence of a spectral band in the 2.2 m SWIR range from AMI, which is required by many atmospheric correction algorithms to retrieve atmospheric aerosol properties. To remedy this issue, we adopt a strategy that combines concurrent GK-2A/AMI and Himawari 8/AHI observations in order to derive AMI SR. We have adapted the NASA Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to process the data stream from Himawari 8/AHI. The advantages of the MAIAC algorithm is its capability to exploit the high temporal frequency and varying illumination geometry of the geostationary data for advanced cloud/snow detection, aerosol retrieval, and characterization of surface bidirectional reflectance properties. Leveraging the similarities of spectral bands and the sun-target-sensor geometry between AMI and AHI, we are able to create denser time series of observations and enhanced BRDF samples over most of the spatial coverage of AMI (and AHI). The combined stereo-type observations not only help derive SR for AMI but also enhance retrievals of the corresponding AHI surface products. We evaluate the resulting AMI SR using ground (AERONET) observations and corresponding MODIS products. Further, we discuss potential challenges in utilizing the geostationary satellite data for land surface monitoring.

geostationary satellite↗

Analysis of an optical imaging system prototype for autonomously monitoring zooplankton in an aquaculture facility

Traditional approaches to biomonitoring in aquatic systems, such as sample collection, sorting, and identification, require significant time and effort, thereby limiting the spatiotemporal resolution of sample collection. Additionally, collection and preservation of samples for subsequent taxonomic identification and enumeration leads to mortality of organisms. Recent advances in technologies that utilize optical imaging and machine learning have provided new opportunities to expedite biomonitoring and lead to significant cost savings. These technologies can be advantageous to scientists or managers that conduct routine biomonitoring to inform operations, as in the case of aquaculture facilities. The Small Aquatic Organism optical imaging system (SAO) is a high-throughput optical imaging and classification prototype system that relies on computer vision and machine learning (Support Vector Machines, or SVMs) to autonomously identify and enumerate aquatic organisms. The SAO provides a more sustainable method of collecting large volumes of data and has the benefit of being used in situ. In this study, we tested the performance of the SAO in providing comparable results to manual zooplankton community monitoring in ten ponds at an aquaculture facility. We performed a side-by-side study comparing the sampling methods of plankton tow nets, where major zooplankton taxonomic classes were manually identified and enumerated, to sampling with the SAO. Vouchered samples were used to develop a training library for the SAO, where classes consisted of water boatman and zooplankton groups: cladocerans, copepod adults, copepod nauplii, and rotifers. SAO imagery was manually classified and compared with predicted results for validation. Accuracy for the SVM classifier of the SAO was 37.4 %. Convolutional Neural Networks (CNN) and Random Forest classifiers were also applied to SAO imagery and image features for comparison. The best CNN model and our Random Forest model had accuracies of 80.4 % and 46.6 % respectively. Challenges faced included the small size of copepod nauplii and rotifers and the limited resolution of the imaging camera, although there are tradeoffs between imaging resolution and the sample processing rate. Furthermore, our comparison shows that advancement in both optical imaging and ML are needed in order for the SAO prototype to yield comparable results to manual community monitoring in an aquaculture facility.

54 ENVIRONMENTAL SCIENCES↗