Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrodynamic profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Laser pulse-length dependent ablation and shock generation in silicon at 5 × 10 14 W/ cm 2 intensities

The effect of laser pulse duration on energy coupling into a planar silicon target is investigated in experiments at the OMEGA-EP facility by varying the laser pulse length τ —spanning 3 orders of magnitude from 100 ps to 10 ns—while maintaining a constant peak laser intensity, I 0 = 5 × 10 14 W/ cm 2 . In theoretical models, the ablation pressure primarily scales for a given material with laser intensity and wavelength, which are all fixed variables here, allowing us to explore the specific role of laser pulse duration. Two-dimensional radiation-hydrodynamics simulations benchmarked with optical probing of the expanding plasma show that the pulse duration is critical for the ablation pressure to reach a steady state. Moreover, the pulse duration impacts shock decay and multiple wave effects, which strongly dictate the evolving shock profile that propagates within the laser-shocked target as ultimately measured by rear-surface diagnostics. The shock velocities inferred from the theoretical model, after considering shock decay, impedance matching, and shock Hugoniot, are found to be in good agreement with velocimetry measurements. However, discrepancies are observed with simulations for the shorter (0.1 ns) and longer (10 ns) pulse durations, which are respectively attributed to unaccounted contributions of kinetic absorption mechanisms and instabilities in simulations. Published by the American Physical Society 2024

Bailly-Grandvaux, M. (ORCID:0000000175294013)↗

Testing the thermal Sunyaev-Zel’dovich power spectrum of a halo model using hydrodynamical simulations

Statistical properties of large-scale cosmological structures serve as powerful tools for constraining the cosmological properties of our Universe. Tracing the gas pressure, the thermal Sunyaev-Zel’dovich (tSZ) effect is a biased probe of mass distribution and, hence, can be used to test the physics of feedback or cosmological models. Therefore, it is crucial to develop robust modelling of hot gas pressure for applications to tSZ surveys. Since gas collapses into bound structures, it is expected that most of the tSZ signal is within halos produced by cosmic accretion shocks. Hence, simple empirical halo models can be used to predict the tSZ power spectra. In this study, we employed the HMx halo model to compare the tSZ power spectra with those of several hydrodynamical simulations: the Horizon suite and the Magneticum simulation. We examine various contributions to the tSZ power spectrum across different redshifts, including the one- and two-halo term decomposition, the amount of bound gas, the importance of different masses, and the electron pressure profiles. Our comparison of the tSZ power spectrum reveals discrepancies between the halo model and cosmological simulations that increase with redshift. We find a 20% to 50% difference between the measured and predicted tSZ angular power spectrum over the multipole range ℓ = 10 3 − 10 4 . Our analysis reveals that these differences are driven by the excess of power in the predicted two-halo term at low k and in the one-halo term at high k . At higher redshifts ( z ∼ 3), simulations indicate that more power comes from outside the virial radius than from inside, suggesting a limitation in the applicability of the halo model. We also observe differences in the pressure profiles, despite the fair level of agreement on the tSZ power spectrum at low redshift with the default calibration of the halo model. In conclusion, our study suggests that the properties of the halo model need to be carefully controlled against real or mock data to be proven useful for cosmological purposes.

Ayçoberry, Emma (ORCID:0000000292351195)↗

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

This paper presents results from an analysis to assess the fluence of meteoroids on the Mars Sample Return Campaign Micrometeoroid Protection System (MMPS) and probability of damage to the Earth Entry System Thermal Protection System (TPS). Results are presented for the mission Outbound trajectory from Earth to Mars. The MEM3 meteoroid environment model was used for the assessment. Results are presented showing the reduction in fluence on cube faces and on the MMPS that can be achieved by selection of an anti-velocity orientation of the MMPS. A methodology is presented that determines the cumulative fluence on the MMPS using the MEM3 meteoroid fluxes and the spacecraft attitude profile over the trajectory. Resulting distributions of fluence over impact velocity, angle, and mass are presented. The fluence results are used to establish velocity-angle scenarios for hydrocode simulation and to assess net damage fluence to the TPS. Example tables containing Smooth Particle Hydrodynamics Code (SPHC) simulation scenarios as well as hypothetical hydrocode simulation scenarios for illustration purposes are presented. The tables present the resulting net damaging fluence to the TPS for each scenario and the total across the scenarios. Additionally, examples of CTH hydrocode simulation are included, demonstrating their use for determining critical impactor across the impactor parameter space, and damage of impactors that penetrate the MMPS.

Micrometeoroid↗

Axisymmetric hydrodynamics in numerical relativity: treating coordinate singularity, artificial heating and modeling MHD instabilities

Two-dimensional axisymmetric simulations of binary neutron star (BNS) merger remnant are a cheap alternative to 3D simulations. To maintain realism for secular timescales, simulations must avoid accumulated errors from drifts in conserved quantities and artificial heating, and they must model turbulent transport in a way that remains plausible throughout the evolution. It is also crucial to avoid numerical artifacts due to the polar coordinate axis singularity. Methods that behave well near the axis often break flux-conservative form of the hydrodynamic equations, resulting in significant drifts in conserved quantities. We present a flux-conservative scheme that maintains smoothness near the axis without sacrificing conservative formulation of the equations or incurring drifts in conserved global quantities. We compare the numerical performance of different treatments of the hydrodynamic equations when evolving a hypermassive neutron star resembling the remnant of a BNS merger. These simulations demonstrate that the new scheme combines the axis smoothness of non-conservative methods with the mass and angular momentum conservation of other conservative methods on $\sim 10^2$ ms timescales of viscous and neutrino-driven evolution. Because fluid profiles remain smooth in the remnant interior, it is possible to remove artificial heating by evolving the entropy density. We show how physical heating and cooling terms can be easily calculated from source terms of the conservative evolution variables and demonstrate our implementation. Finally, we discuss and implement improvements to the effective viscosity scheme to better model the effect of magnetohydrodynamic instabilities as the remnant evolves.

axisymmetry↗

The Three-dimensional Collapse of a Rapidly Rotating 16 M ⊙ Star

I report on the three-dimensional (3D) hydrodynamic evolution of a rapidly rotating 16 M ⊙ star to iron core collapse. For the first time, I follow the 3D evolution of the angular momentum (AM) distribution in the iron core and convective shell burning regions for the final 10 minutes up to and including gravitational instability and core collapse. In 3D, convective regions show efficient AM transport that leads to an AM profile that differs in shape and magnitude from MESA within a few shell convective turnover timescales. For different progenitor models, such as those with tightly coupled Si/O convective shells, efficient AM transport in 3D simulations could lead to a significantly different AM distribution in the stellar interior affecting estimates of the natal neutron star or black hole spin. The results suggest that 3D AM transport in convective and rotating shell burning regions are critical components in models of massive stars and could qualitatively alter the explosion outcome and inferred compact remnant properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Phase distribution in Fischer-Tropsch mimicked slurry bubble column via computed tomography

This study aims to investigate the phases distribution and hydrodynamics in an air-Therminol LT-glass beads slurry bubble column reactor in bubbly and churn-turbulent flow regimes by implementing a gamma-ray computed tomography. It is found that gas holdup increases with increasing superficial gas velocity and operating pressure while increasing solids loading has an opposite effect on gas holdup measurements. It is noticed that the pressure effect is more significant at high solids loading and the solids loading is relatively more substantial at lower pressure. Solids loading has the most significant a stronger effect on the solids holdup profile than on the gas holdup profile. Current results were compared with the Sedimentation-Dispersion Model (SDM) predictions. Overall, the findings of this study advance the knowledge of the true behavior of phases distribution in FT mimicked slurry bubble columns which are pertinent in designing such reactors.

42 ENGINEERING↗

Density evolution after shock release from laser-driven polystyrene (CH) targets in inertial confinement fusion

The evolution of the plasma density in the rarefaction wave formed after a laser-driven shock is released from a CH foil was measured using optical interferometry. Here, it was found that the plasma density profile is very sensitive to the conditions at the back surface of the foil before the shock release. Dedicated experiments demonstrated that radiation preheat by coronal x-rays caused early expansion of the back surface and faster expansion of the rarefaction wave. Radiation-hydrodynamics simulations with accurate modeling of radiation preheat from the plasma corona are in good agreement with the experimental results. The early expansion of material interfaces due to coronal x-ray preheat must be evaluated in designing and interpreting laser-driven inertial confinement fusion experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A platform to measure isentropes from proton-heated warm dense matter on short pulse laser facilities

We describe the development of an experimental platform that measures the release isentrope of materials heated isochorically to temperatures of a few electron volts, using short-pulse laser-produced protons to heat the sample and long-pulse laser-produced x rays to perform streaked x-ray radiography. The density profiles derived from the radiography data are integrated to generate pressure–density isentropes, independent of prior knowledge of the equation of state of the sample material. In order to understand the sensitivities of isentrope extraction from radiography data, we analyze synthetic radiographs generated by a radiation hydrodynamics code. Noise reduction and high spatial resolution are critical for isentrope reconstruction, as demonstrated by the analysis of a proof-of-principle shot day on the OMEGA-EP facility. In conclusion, the data demonstrate the feasibility of the platform for characterizing isentropes, and we discuss the necessary improvements to enhance precision in differentiating between equation-of-state models.

Equations of state↗

Baryon-Interacting Dark Matter: heating dark matter and the emergence of galaxy scaling relations

The empirical scaling relations observed in disk galaxies remain challenging for models of galaxy formation. The most striking among these is the Mass Discrepancy-Acceleration Relation (MDAR), which encodes both a tight baryonic Tully-Fisher relation (BTFR) and the observed diversity of galaxy rotation curves through the central surface density relation (CSDR). Building on our earlier work [1], we propose here that the MDAR is the result of interactions between baryons and ‘Baryon-Interacting Dark Matter’ (BIDM), which heat up the dark matter. Following a bottom-up, hydrodynamical approach, we find that the MDAR follows if: i) the BIDM equation of state approximates that of an ideal gas; ii) the BIDM relaxation time is order the Jeans time; iii) the heating rate is inversely proportional to the BIDM density. Remarkably, under these assumptions the set of hydrodynamical equations together with Poisson’s equation enjoy an anisotropic scaling symmetry. In the BIDM-dominated regime, this gives rise to an enhanced symmetry which fully captures the low-acceleration limit of the MDAR. We then show that, assuming a cored pseudo-isothermal profile at equilibrium, this set of equations gives rise to parameters reproducing the MDAR. Specifically, in the flat part of the rotation curve the asymptotic rotational velocity matches the parametric dependence of the BTFR. Moreover, in the central region of high-surface brightness galaxies, the profile reproduces the CSDR. Finally, by studying the time-dependent approach to equilibrium, we derive a global combination of the BTFR and CSDR, which matches the expectations in low surface-brightness galaxies. The form of the heating rate also makes model-independent predictions for various cosmological observables. We argue that our scenario satisfies existing observational constraints, and, intriguingly, offers a possible explanation to the EDGES anomaly.

79 ASTRONOMY AND ASTROPHYSICS↗

Heavy flavor quenching and flow: the roles of initial condition, pre-equilibrium evolution, and in-medium interaction

Within an advanced Langevin-hydrodynamics framework coupled to a hybrid fragmentation-coalescence hadronization model, we study heavy flavor quenching and flow in relativistic heavy-ion collisions. We investigate how the initial heavy quark spectrum, the in-medium energy loss and hadronization mechanisms of heavy quarks, the evolution profile of the pre-equilibrium stage, the medium flow, and the temperature dependence of heavy quark diffusion coefficients influence the suppression and elliptic flow of heavy mesons at the RHIC and the LHC. Our results show that the different modeling of initial conditions, pre-equilibrium evolution, and in-medium interactions can individually yield uncertainties of approximately 10-40% in D meson suppression and flow at a low transverse momentum. Furthermore, we also find that proper combinations of collisional versus radiative energy loss, coalescence versus fragmentation in hadronization, and the inclusion of medium flow are the most important factors for describing the suppression and elliptic flow of heavy mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Viscous Gubser flow with conserved charges to benchmark fluid simulations

We present semi-analytical solutions for the evolution of both the temperature and chemical potentials for viscous Gubser flow with conserved charges. Such a solution can be especially useful in testing numerical codes intended to simulate relativistic fluids with large chemical potentials. The freeze-out hypersurface profiles for constant energy density are calculated, along with the corresponding normal vectors, and presented as a new unit test for numerical codes. We also compare the influence of the equation of state on the semi-analytical solutions. We benchmark the newly developed smoothed particle hydrodynamics code ccake that includes both shear viscosity and three conserved charges. Here, the numerical solutions are in excellent agreement with the semi-analytical solution and are also able to accurately reproduce the hypersurface at freeze-out.

Hydrodynamic models↗

Conditional H I Mass Functions and the H I -to-halo Mass Relation in the Local Universe

We present a new H I mass estimator that relates log 10 (M HI /M * ) to a linear combination of four galaxy properties: stellar surface mass density, color index u - r, stellar mass, and concentration index, with the scatter of individual galaxies around the mean H I mass modeled with a Gaussian distribution function. We calibrate the estimator using the xGASS sample, including both H I detection and nondetection, and constrain the model parameters through Bayesian inferences. Tests with mock catalogs demonstrate that our estimator provides unbiased H I masses for optical samples like SDSS. We apply our estimator to the SDSS spectroscopic sample to estimate the H I mass function (HIMF) of local galaxies, as well as the conditional H I mass function in galaxy groups and the H I –halo mass relation. Our HIMF agrees with the ALFALFA measurements at M HI ≳ 5 × 10 9 M ⊙ , but with higher amplitude and a steeper slope at lower masses. We show that this discrepancy is caused primarily by the cosmic variance, which is corrected for the SDSS sample but not for ALFALFA. The total CHIMFs for all halo masses can be described by a single Schechter function, while those of central galaxies show a double-Gaussian profile. The total H I mass in a group increases monotonically with halo mass, but for central galaxies, the H I mass shows weak dependence on halo mass when M h ≳ 10 12 M ⊙ . The observed H I –halo mass relation is not reproduced by current hydrodynamic simulations and semianalytic models of galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Chain Dynamics in Magnetorheological Suspensions

Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between fluctuating chains of dipolar particles. Resolving this issue would contribute greatly to the understanding of these interesting and important materials. We have begun to test the predictions of the HT model by both examining the dynamics of individual chains and by measuring the forces between dipolar chains directly to accurately and quantitatively assess the interactions that they experience. To do so, we employ optical trapping techniques and video-microscopy to manipulate and observe our samples on the microscopic level. With these techniques, it is possible to observe chains that are fluctuating freely in three-dimensions, independent of interfacial effects. More importantly, we are able to controllably observe the interactions of two chains at various separations to measure the force-distance profile. The techniques also allow us to study the mechanical properties of individual chains and chain clusters. Our work to this point has focused on reversibly-formed dipolar chains due to field induced dipoles where the combination of this chaining, the dipolar forces, and the hydrodynamic interactions that dictate the rheology of the suspensions. One can envision, however, many situations where optical, electronic, or rheological behavior may be optimized with magneto-responsive anisotropic particles. Chains of polarizable particles may have the best properties as they can coil and flex in the absence of a field and stiffen and orient when a field is applied. We have recently demonstrated a synthesis of stable, permanent paramagnetic chains by both covalently and physically linking paramagnetic colloidal particles. The method employed allows us to create monodisperse chains of controlled length. We observed the stability, field-alignment, and rigidity of this new class of materials. The chains may exhibit unique rheological properties in an applied magnetic field over isotropic suspensions of paramagnetic particles. They are also useful rheological models as bead-spring systems. These chains form the basis for our current experiments with optical traps.

Gast, A. P.↗

Atomic Physics of Shocked Plasma in Winds of Massive Stars

High resolution diffraction grating spectra of X-ray emission from massive stars obtained with Chandra and XMM-Newton have revolutionized our understanding of their powerful, radiation-driven winds. Emission line shapes and line ratios provide diagnostics on a number of key wind parameters. Modeling of resolved emission line velocity profiles allows us to derive independent constraints on stellar mass-loss rates, leading to downward revisions of a factor of a few from previous measurements. Line ratios in He-like ions strongly constrain the spatial distribution of Xray emitting plasma, confirming the expectations of radiation hydrodynamic simulations that X-ray emission begins moderately close to the stellar surface and extends throughout the wind. Some outstanding questions remain, including the possibility of large optical depths in resonance lines, which is hinted at by differences in line shapes of resonance and intercombination lines from the same ion. Resonance scattering leads to nontrivial radiative transfer effects, and modeling it allows us to place constraints on shock size, density, and velocity structure

Physics↗

Data-Driven Radiative Hydrodynamic Modeling of the 2014 March 29 X1.0 Solar Flare

Spectroscopic observations of solar flares provide critical diagnostics of the physical conditions in the flaring atmosphere. Some key features in observed spectra have not yet been accounted for in existing flare models. Here we report a data-driven simulation of the well-observed X1.0 flare on 2014 March 29 that can reconcile some well-known spectral discrepancies. We analyzed spectra of the flaring region from the Interface Region Imaging Spectrograph (IRIS) in Mg II hk, the Interferometric BIdimensional Spectropolarimeter at the Dunn Solar Telescope (DSTIBIS) in H(alpha) 6563A and Ca II 8542A, and the Reuven Ramaty High Energy Solar Spectroscope Imager (RHESSI) in hard X-rays. We constructed a multithreaded flare loop model and used the electron flux inferred from RHESSI data as the input to the radiative hydrodynamic code RADYN to simulate the atmospheric response. We then synthesized various chromospheric emission lines and compared them with the IRIS and IBIS observations. In general, the synthetic intensities agree with the observed ones, especially near the northern footpoint of the flare. The simulated Mg II line profile has narrower wings than the observed one. This discrepancy can be reduced by using a higher microturbulent velocity (27 km/s) in a narrow chromospheric layer. In addition, we found that an increase of electron density in the upper chromosphere within a narrow height range of approx. 800 km below the transition region can turn the simulated Mg II line core into emission and thus reproduce the single peaked profile, which is a common feature in all IRIS flares.

Da Costa, Fatima Rubio↗

Fully kinetic simulations of strong steady-state collisional planar plasma shocks

We report on simulations of strong, steady-state collisional planar plasma shocks with fully kinetic ions and electrons, independently confirmed by two fully kinetic codes (an Eulerian continuum and a Lagrangian particle-in-cell). While kinetic electrons do not fundamentally change the shock structure as compared with fluid electrons, we find an appreciable rearrangement of the preheat layer, associated with nonlocal electron heat transport effects. The electron heat-flux profile qualitatively agrees between kinetic- and fluid-electron models, suggesting a certain level of “stiffness,” though substantial nonlocality is observed in the kinetic heat flux. We also find good agreement with nonlocal electron heat-flux closures proposed in the literature. Finally, in contrast to the classical hydrodynamic picture, we find a significant collapse in the “precursor” electric-field shock at the preheat layer leading edge, which correlates with the electron-temperature gradient relaxation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Meso-scale Instability Triggered by Dust Feedback in Dusty Rings: Origin and Observational Implications

High spatial resolution observations of protoplanetary disks by ALMA have revealed many substructures that are providing interesting constraints on disk physics as well as dust dynamics, both of which are essential for understanding planet formation. We carry out high-resolution, 2D global hydrodynamic simulations, including the effects of dust feedback, to study the stability of dusty rings. When the ring edges are relatively sharp and the dust surface density becomes comparable to the gas surface density, we find that dust feedback enhances the radial gradients of both the azimuthal velocity profile and the potential vorticity profile at the ring edges. This eventually leads to instabilities on meso-scales (spatial scales of several disk scale heights), causing dusty rings to be populated with many compact regions with highly concentrated dust densities. We also produce synthetic dust emission images using our simulation results and discuss the comparison between simulations and observations.

79 ASTRONOMY AND ASTROPHYSICS↗

An experimental investigation of flow-induced oscillations of the Bruel and Kjaer in-flow microphone

One source contributing to wind tunnel background noise is microphone self-noise. An experiment was conducted to investigate the flow-induced acoustic oscillations of Bruel & Kjaer (B&K) in-flow microphones. The results strongly suggest the B&K microphone cavity behaves more like an open cavity. Their cavity acoustic oscillations are likely caused by strong interactions between the cavity shear layer and the cavity trailing edge. But the results also suggest that cavity shear layer oscillations could be coupled with cavity acoustic resonance to generate tones. Detailed flow velocity measurements over the cavity screen have shown inflection points in the mean velocity profiles and high disturbance and spectral intensities in the vicinity of the cavity trailing edge. These results are the evidence for strong interactions between cavity shear layer oscillations and the cavity trailing edge. They also suggest that beside acoustic signals, the microphone inside the cavity has likely recorded hydrodynamic pressure oscillations, too. The results also suggest that the forebody shape does not have a direct effect on cavity oscillations. For the FITE (Flow Induced Tone Eliminator) microphone, it is probably the forebody length and the resulting boundary layer turbulence that have made it work. Turbulence might have thickened the boundary layer at the separation point, weakened the shear layer vortices, or lifted them to miss impinging on the cavity trailing edge. In addition, the study shows that the cavity screen can modulate the oscillation frequency but not the cavity acoustic oscillation mechanisms.

Fields, Richard S., Jr.↗