Search NASA⌕ Search

SEARCH · Search NASA

Results for “ignition modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A mechanism for the compressive ignition of liquid monopropellants

Possible mechanisms for compressive ignition of liquid monopropellants are discussed. These mechanisms all involve the collapse of a gas filled bubble imbedded in the liquid. A model of the collapse of a gas bubble in an incompressible liquid and the combustion of the surrounding liquid after ignition occurs is presented. The effect of gas covolume, liquid density, the adiabatic exponent, rate of pressurization and prepressurization are investigated. Calculations for finite and infinite liquid volumes are also presented. Gas generation in the bubble is shown to have a significant effect on its evolution and the introduction of a surface enhancement factor leads to a runaway reaction. For the conditions considered, the reacting bubble oscillates at a frequency of about 35 kHz over the first 0.5 milliseconds. This frequency decreases as the surface enhancement factor is increased. The implication is that a one dimensional model of this process may be tractable from the standpoint of computer time.

Morrison, W. F.↗
NASA NTRS1991

Ignition transient analysis of solid rocket motor

Measurement data on the performance of Space Shuttle Solid Rocket Motor show wide variations in the head-end pressure changes and the total thrust build-up during the ignition transient periods. To analyze the flow and thermal behavior in the tested solid rocket motors, a 1-dimensional, ideal gas flow model via the SIMPLE algorithm was developed. Numerical results showed that burning patterns in the star-shaped head-end segment of the propellant and the erosive burning rate are two important factors controlling the ignition transients. The objective of this study is to extend the model to include the effects of aluminum particle commonly used in solid propellants. To treat the effects of aluminum-oxide particles in the combustion gas, conservation of mass, momentum, and energy equations for the particles are added in the numerical formulation and integrated by an inter-phase-slip algorithm.

Han, Samuel S.↗
NASA NTRS2022

Megafires in a Warming World: What Wildfire Risk Factors Led to California’s Largest Recorded Wildfire

Massive wildfires and extreme fire behavior are becoming more frequent across the westernUnited States, creating a need to better understand how megafire behavior will evolve in our warmingworld. Here, the fire spread model Prometheus is used to simulate the initial explosive growth ofthe 2020 August Complex, which occurred in northern California (CA) mixed conifer forests. Hightemperatures, low relative humidity, and daytime southerly winds were all highly correlated withextreme rates of modeled spread. Fine fuels reached very dry levels, which accelerated simulationgrowth and heightened fire heat release (HR). Model sensitivity tests indicate that fire growth andHR are most sensitive to aridity and fuel moisture content. Despite the impressive early observedgrowth of the fire, shifting the simulation ignition to a very dry September 2020 heatwave predicted a>50% increase in growth and HR, as well as increased nighttime fire activity. Detailed model analysesof how extreme fire behavior develops can help fire personnel prepare for problematic ignitions.

Kevin Varga↗
NASA NTRS1987

Pressure scaling effects in a scramjet combustion chamber

The test results obtained for a model scramjet over a range of pressure levels corresponding to different flight altitudes involve enthalpies that vary from the ignition limit, at the low temperature end, to temperatures where the dissociation of combustion products severely limits heat release. The minimum temperature is noted to be highly pressure-sensitive; above the ignition limit, the amount of heat release increased markedly with pressure and with combustion chamber length. A FEM computer code has been used to model the mixing and combustion processes.

Morgan, R. G.↗
NASA NTRS1984

A comprehensive model to determine the effects of temperature and species fluctuations on reaction rates in turbulent reaction flows

The use of silane (SiH4) as an effective ignitor and flame stabilizing pilot fuel is well documented. A reliable chemical kinetic mechanism for prediction of its behavior at the conditions encountered in the combustor of a SCRAMJET engine was calculated. The effects of hydrogen addition on hydrocarbon ignition and flame stabilization as a means for reduction of lengthy ignition delays and reaction times were studied. The ranges of applicability of chemical kinetic models of hydrogen-air combustors were also investigated. The CHARNAL computer code was applied to the turbulent reaction rate modeling.

Magnotti, F.↗
NASA NTRS1995

Oxidation Mechanisms of Toluene and Benzene

An expanded and improved version of a previously published benzene oxidation mechanism is presented and shown to model published experimental data fairly successfully. This benzene submodel is coupled to a modified version of a toluene oxidation submodel from the recent literature. This complete mechanism is shown to successfully model published experimental toluene oxidation data for a highly mixed flow reactor and for higher temperature ignition delay times in a shock tube. A comprehensive sensitivity analysis showing the most important reactions is presented for both the benzene and toluene reacting systems. The NASA Lewis toluene mechanism's modeling capability is found to be equivalent to that of the previously published mechanism which contains a somewhat different benzene submodel.

Bittker, David A.↗
NASA NTRS1983

Evidence of erosive burning in shuttle solid rocket motor

Known models of Shuttle Solid Rocket Motor (SRM) performance have failed to produce pressure-time traces which accurately matched actual motor performance, especially during the first 5 seconds after ignition and during the last quarter of web burn time. Efforts to compensate for these differences in model reconstruction and actual performance resulted in resorting to the use of a Burning Anomaly Rate Function (BARF). It was suspected that propellant erosive burning was primarily responsible for the variation of model from actual results. The three dimensional Hercules Grain Design and Internal Ballistics Evaluation Program was made operational and slightly modified and an extensive trial and error effort was begun to test the hypothesis of erosive burning as an explanation of the burning anomaly. It was found that introduction of erosive burning (using Green's erosive burning equation) over portions of the aft segment grain and above a threshold gas Mach number did, in fact, give excellent agreement with the actual motor trace.

Martin, C. L.↗
NASA NTRS1988

On the need for space tests of plasma contactors as electron collectors

An analysis is presented of laboratory experiments that have shown that hollow plasma sources can provide low-impedance contact with a background plasma. In particular, some experiments show an report an 'ignited mode' of electron collection using plasma sources where almost an ampere was collected at a potential of 100 volts. The experimental results are compared with theoretical and computational models of plasma layers. Preliminary results indicate that the measured potential profiles and collected currents during the 'ignited mode' correspond to an increase in the background plasma thermal current of more than an order of magnitude. The results imply that the 'ignited mode' results are substantially impacted by the laboratory electron source and the tank size. Only experiments performed in space will be able to provide the correct boundary conditions for reliably testing high electron collection by plasma contactors.

Katz, Ira↗
NASA NTRS1994

Ignition and combustion characteristics of metallized propellants, phase 2

Experimental and analytical investigations focusing on aluminum/hydrocarbon gel droplet secondary atomization and its effects on gel-fueled rocket engine performance are being conducted. A single laser sheet sizing/velocimetry diagnostic technique, which should eliminate sizing bias in the data collection process, has been designed and constructed to overcome limitations of the two-color forward-scatter technique used in previous work. Calibration of this system is in progress and the data acquisition/validation code is being written. Narrow-band measurements of radiant emission, discussed in previous reports, will be used to determine if aluminum ignition has occurred in a gel droplet. A one-dimensional model of a gel-fueled rocket combustion chamber, described in earlier reports, has been exercised in conjunction with a two-dimensional, two-phase nozzle code to predict the performance of an aluminum/hydrocarbon fueled engine. Estimated secondary atomization effects on propellant burnout distance, condensed particle radiation losses to the chamber walls, and nozzle two phase flow losses are also investigated. Calculations indicate that only modest secondary atomization is required to significantly reduce propellant burnout distances, aluminum oxide residual size, and radiation heat losses. Radiation losses equal to approximately 2-13 percent of the energy released during combustion were estimated, depending on secondary atomization intensity. A two-dimensional, two-phase nozzle code was employed to estimate radiation and nozzle two phase flow effects on overall engine performance. Radiation losses yielded a one percent decrease in engine Isp. Results also indicate that secondary atomization may have less effect on two-phase losses than it does on propellant burnout distance and no effect if oxide particle coagulation and shear induced droplet breakup govern oxide particle size. Engine Isp was found to decrease from 337.4 to 293.7 seconds as gel aluminum mass loading was varied from 0-70 wt percent. Engine Isp efficiencies, accounting for radiation and two phase flow effects, on the order of 0.946 were calculated for a 60 wt percent gel, assuming a fragmentation ratio of five.

Mueller, D. C.↗
NASA NTRS2020

Ignition and Burn in a Hybrid Nuclear Fuel for a Pulsed Rocket Engine

This work explores the parameter space of a cylindrical hybrid nuclear fuel in support of a z-pinch driven pulsed fission-fusion (PuFF) engine. 0D power balance and 1D burn wave calculations have been performed to explore the parameter space of hybrid cylindrical nuclear fuels. The boundary of minimal initial conditions needed to reach breakeven are found within the context of the model. The effects of initial conditions upon the yield at the end of burn wave expansion are also determined. The model is used to examine the minimum initial energies predicted to result in yields of a few MJ. The goal of this work is to guide fuel design, inform future models and experiments as well as look for the most efficient parameter space for ignition in a z-pinch driven hybrid nuclear reaction. The impact of initial parameters upon ignition, burn, and gain are discussed. It is found that a hybrid cylindrical target may breakeven with initial energy near the axis of approximately 4 to 6 MJ in lithium deuteride/uranium 235 fuel. It is also found that magnetic field can lower the threshold further of which the magnitude changes across the parameter space. The dual fusion/fission reactions are found to boost each other leading to lower initial driving energies needed to reach breakeven in the hybrid cylindrical nuclear fuel.

fission↗
NASA NTRS2019

Characterization of a Fixed-Volume Release System for Initiating an Arc Discharge in a Heaterless Hollow Cathode

Heaterless hollow cathodes may provide improved reliability, simplicity, and portability when compared with traditional heater-equipped hollow cathodes, traits which are well suited for low-power Hall-effect thrusters that are currently being developed for small satellite propulsion. Despite the advantages, there are concerns that the ignition process in heaterless hollow cathodes may impose an excessive burden on the propellant feed and/or electrical systems of a small satellite. To address this concern, a fixed-volume release flow protocol, which can be used to temporarily increase the propellant mass flow rate, was developed, modeled, and experimentally evaluated. The new protocol allowed for a heaterless hollow cathode to be ignited reliably with a moderate bias voltage and a minimal electrical power requirement. Specifically, a xenon fed heaterless hollow cathode was ignited with a 375 V bias using 17.3 mg of propellant. Repeating the tests with krypton showed that ignition could be achieved in the same heaterless hollow cathode assembly with a 300 V bias using 13.1 mg of propellant. We judge that a fixed-volume release system could be implemented in a satellite feed system while introducing minimal additional complexity.

Heaterless↗
NASA NTRS2019

Characterization of a Fixed-Volume Release System for Initiating an Arc Discharge in a Heaterless Hollow Cathode

Heaterless hollow cathodes may provide improved reliability, simplicity, and portability when compared with traditional heater-equipped hollow cathodes, traits which are well suited for low-power Hall-effect thrusters that are currently being developed for small satellite propulsion. Despite the advantages, there are concerns that the ignition process in heaterless hollow cathodes may impose an excessive burden on the propellant feed and/or electrical systems of a small satellite. To address this concern, a fixed-volume release flow protocol, which can be used to temporarily increase the propellant mass flow rate, was developed, modeled, and experimentally evaluated. The new protocol allowed for a heaterless hollow cathode to be ignited reliably with a moderate bias voltage and a minimal electrical power requirement. Specifically, a xenon fed heaterless hollow cathode was ignited with a 375 V bias using 17.3 mg of propellant. Repeating the tests with krypton showed that ignition could be achieved in the same heaterless hollow cathode assembly with a 300 V bias using 13.1 mg of propellant. We judge that a fixed-volume release system could be implemented in a satellite feed system while introducing minimal additional complexity.

Heaterless↗
NASA NTRS1975

Theoretical studies of massive stars. I - Evolution of a 15-solar-mass star from the zero-age main sequence to neon ignition

The evolution of a star with mass 15 times that of the sun from the zero-age main sequence to neon ignition has been computed by the Henyey method. The hydrogen-rich envelope and all shell sources were explicitly included in the models. An algorithm has been developed for approximating the results of carbon burning, including the branching ratio for the C-12 + C-12 reaction and taking some secondary reactions into account. Penetration of the convective envelope into the core is found to be unimportant during the stages covered by the models. Energy transfer from the carbon-burning shell to the core by degenerate electron conduction becomes important after the core carbon-burning stage. Neon ignition will occur in a semidegenerate core and will lead to a mild 'flash.' Detailed numerical results are given in an appendix. Continuation of the calculations into later stages and variations with the total mass of the star will be discussed in later papers.

Endal, A. S.↗
NASA NTRS1979

An overview of NASA research on positive displacement type general aviation engines

The paper surveys the current status of the aviation positive displacement engine programs underway at the NASA Lewis Research Center. The program encompasses conventional, lightweight diesel, and rotary combustion engines. Attention is given to topics such as current production type engine improvement, cooling drag reduction, fuel injection, and experimental and theoretical combustion studies. It is shown that the program's two major technical thrusts are directed toward lean operation of current production type spark ignition engines and advanced alternative engine concepts. Finally, an Otto cycle computer model is also covered.

Kempke, E. E.↗
NASA NTRS1989

Verification of spatial and temporal pressure distributions in segmented solid rocket motors

A wide variety of analytical tools are in use today to predict the history and spatial distributions of pressure in the combustion chambers of solid rocket motors (SRMs). Experimental and analytical methods are presented here that allow the verification of many of these predictions. These methods are applied to the redesigned space shuttle booster (RSRM). Girth strain-gage data is compared to the predictions of various one-dimensional quasisteady analyses in order to verify the axial drop in motor static pressure during ignition transients as well as quasisteady motor operation. The results of previous modeling of radial flows in the bore, slots, and around grain overhangs are supported by approximate analytical and empirical techniques presented here. The predictions of circumferential flows induced by inhibitor asymmetries, nozzle vectoring, and propellant slump are compared to each other and to subscale cold air and water tunnel measurements to ascertain their validity.

Salita, Mark↗
NASA NTRS2005

Spreading of thermonuclear flames on the neutron star in SAX J1808.4-3658: an observational tool

We analyse archival Rossi X-Ray Timing Explorer (RXTE) proportional counter array (PCA) data of thermonuclear X-ray bursts from the 2002 outburst of the accreting millisecond pulsar SAX 51808.4-3658. We present evidence of a complex frequency modulation of oscillations during burst rise, and correlations among the time evolution of the oscillation frequency, amplitude, and the inferred burning region area. We discuss these findings in the context of a model, based on thermonuclear flame spreading on the neutron star surface, that can qualitatively explain these features. From our model, we infer that for the 2002 Oct. 15 thermonuclear burst, the ignition likely occurred in the mid-latitudes, the burning region took approx. 0.2 s to nearly encircle the equatorial region of the neutron star, and after that the lower amplitude oscillation originated from the remaining asymmetry of the burning front in the same hemisphere where the burst ignited. We emphasize that studies of the evolution of burst oscillation properties during burst rise can provide a powerful tool to understand thermonuclear flame spreading on neutron star surfaces under extreme physical conditions.

Bhattacharyya, Sudip↗