Search NASA⌕ Search

SEARCH · Search NASA

Results for “indium oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Isolation of Single Donors in ZnO

The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The emission stability of these single donors in terms of both intensity and frequency, alongside their transition linewidths less than twice the lifetime limit, highlight the promise of single In donors as optically accessible spin qubits. Here, the optical stability of single donors after FIB fabrication is promising for optical device integration required for scalable quantum technologies based on single donors in direct band gap semiconductors.

42 ENGINEERING↗
DOE OSTI2022

Fine Pitch Bonding for High Density Interconnects

CTE (coefficient of thermal expansion) mismatch between two wafers has potential for brittle failure when large areas are bonded on top of one another (wafer to wafer or wafer to die bonds). To address this type of failure, we proposed patterning a polymer around metallic interconnects. For this project, utilized benzo cyclobutene (BCB) to form the bond and accommodate stress. For the metal interconnects, we used indium. To determine the benefits of utilizing BCB, mechanical shear testing of die bonding with just BCB were compared to die bonded just with oxide. These tests demonstrated that BCB, when cured for only 30 minutes and bonded at 200°C, the BCB was able to withstand shear forces similar to oxide. Furthermore, when the BCB did fail, it experienced a more ductile failure, allowing the silicon to crack, rather than shatter. To demonstrate the feasibility of using BCB between indium interconnects, wafers were pattered with layers of BCB with vias for indium or ENEPIG (electroless nickel, electroless palladium, immersion gold). Subsequently, these wafers were pattered with a variety of indium or ENEPIG interconnect pitches, diameters, and heights. These dies were bonded under a variety of conditions, and those that held a bond, were cross-sectioned and imaged. Images revealed that certain bonding conditions allow for interconnects and BCB to achieve a void-less bond and thus demonstrate that utilizing polymers in place of oxide is a feasible way to reduce CTE stress.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Polymer-Stabilized Liquid Metal Nanoparticles as a Scalable Current Collector Engineering Approach Enabling Lithium Metal Anodes

Dendrites and dead lithium formation over prolonged cycling have long been challenges that hinder the safe implementation of metallic Li anodes. In this study, we employ polymer-stabilized liquid metal nanoparticles (LM-P NPs) of eutectic gallium indium (EGaIn) to create uniform Li nucleation sites enabling homogeneous lithium electrodeposition. Block copolymers of poly(ethylene oxide) and poly(acrylic acid) (PEO-b-PAA) were grafted onto the EGaIn surface, forming stabilized, well-dispersed NPs. Using a scalable spray coating approach, LM-P NPs were fabricated on copper current collectors, providing lithiophilic PEO sites and interactive carboxyl groups to guide Li deposition. The Li-EGaIn alloying process greatly reduced the Li + diffusion barrier, enabling fast Li transport through the coating layer, resulting in decreased nucleation overpotential. Therefore, about five times lower Li nucleation overpotential was obtained on the LM-P modified Cu with an optimal composition of the polymers than the bare Cu substrates. DFT computations was used to reveal the binding properties between the LM-P layer and Li. Due to the regulated Li plating/stripping process, as-obtained 30 μm Li anodes paired with LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM8 11 ) with a negative/positive electrode capacity (N/P) ratio ~ 10 exhibited stable cycling performance at 0.5C for over 250 cycles, with an average Coulombic efficiency of 99.55%. Ultrathin Li (1 μm) anodes with an N/P ratio ~ 0.6 were also demonstrated in Li|LiFePO 4 cells, which examined the stabilization of Li by LM-P NPs and monitored practical loadings of Li anodes that are close to anode-free systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Identity of the reversible hole traps in InP/ZnSe core/shell quantum dots

Density functional theory calculations are combined with time-resolved photoluminescence experiments to identify the species responsible for reversible trapping of holes following photoexcitation of InP/ZnSe/ZnS core/shell/shell quantum dots (QDs) having excess indium in the shell. Several possible assignments are considered, and a substitutional indium adjacent to a zinc vacancy, In 3+ /V Zn 2- , is found to be the most likely. This assignment is consistent with the observation that trapping occurs only when the QD has excess indium and is supported by experiments showing that the addition of zinc oleate or acetate decreases the extent of trapping, presumably by filling some of the vacancy traps. We also show that addition of alkyl carboxylic acids causes increased trapping, presumably by creation of additional zinc vacancies. The calculations show that either a single In 2+ ion or an In 2+ -In 3+ dimer is much too easily oxidized to form the reversible traps observed experimentally, while In 3+ is far too difficult to oxidize. Additional experimental data on InP/ZnSe/ZnS QDs synthesized in the absence of chloride demonstrates that the reversible traps are not associated with Cl - . Furthermore, a zinc vacancy adjacent to a substitutional indium is calculated to have its highest occupied orbitals about 1 eV above the top of the valence band of bulk ZnSe, in the appropriate energy range to act as reversible traps for quantum confined holes in the InP valence band. The associated orbitals are predominantly composed of p orbitals on the Se atoms adjacent to the Zn vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Advances in Colloidal InP-Based Quantum Dots for Photocatalytic Hydrogen Evolution

Photocatalytic materials for hydrogen generation are typically categorized into UV-absorbing metal oxides and visible-range semiconductors such as chalcogenides or perovskites, which often incorporate toxic elements. To address environmental concerns of the latter group, indium phosphide (InP)-based quantum dots (QDs) have recently emerged as a less toxic alternative. These nanocrystals (NCs) benefit from a broadband and tunable absorption spectrum, which is well matched for solar photochemistry, and offer suitable electronic characteristics to drive photoinduced charge separation. This perspective provides a comprehensive summary of the recent advancements in developing InP-based NCs with a focus on photocatalytic hydrogen production. We discuss synthetic strategies that enhance the catalytic activity of these materials and highlight key challenges that must be addressed to enhance their performance. Finally, we explore future research directions aimed at improving photocatalytic efficiency and integrating InP-based QDs into practical solar-to-fuel conversion systems.

Hydrogen↗
DOE OSTI2022

Different interfacial reactivity of lithium metal chloride electrolytes with high voltage cathodes determines solid-state battery performance

A deep understanding of the interaction of the surface of cathode materials with solid electrolytes is crucial to design advanced solid-state batteries (SSBs). This is especially true for the new class of lithium metal chloride (Li-M-Cl) solid electrolytes which are receiving rapidly growing attention due to their very high oxidative stability (>4 V) in combination with good ionic conductivity that can enable long cell cycle life. While Li-M-Cl electrolytes typically contain resource-limited metals (M) such as indium or rare earths, work has focused on substituting M with more abundant elements such as zirconium. Via operando resistance measurements using intermittent current interruption we explore the dynamic evolution of the interphase at the surface of Ni-rich NCM85 or NCM111 cathode particles inside a working SSB with three different Li-(M 1 ,M 2 )-Cl catholytes (Li 3 InCl 6 , Li 2 Sc 1/3 In 1/3 Cl 4 and Li 5/2 Y 1/2 Zr 1/2 Cl 6 ) to reveal the impact of the cationic metal substitution on the interfacial chemistry. We show that the metal plays a critical role in determining high voltage stability, contrary to prior assumptions. Using a combination of cyclic voltammetry and ultraviolet photoelectron spectroscopy measurements of the electronic band structure to assess oxidative stability; coupled with DFT calculations and ToF-SIMS to evaluate products formed at the interface at different upper cutoff potentials and degrees of delithiation, we are able to differentiate between electrochemical and chemical degradation. We find that Li 2 Sc 1/3 In 1/3 Cl 4 yields the highest (and Li 3 InCl 6 the lowest) stability against electrochemical oxidation, while Li 5/2 Y 1/2 Zr 1/2 Cl 6 undergoes a detrimental chemical reaction with oxygen released from Ni-rich NCM85 at high potentials, resulting in fast capacity fading. Altogether, our work establishes a platform for the metrics and an approach that can be utilized to efficiently evaluate the stability of new halide SEs in SSB cells.

25 ENERGY STORAGE↗
DOE OSTI2023

Stable Cadmium-Free Quantum Dot Optical Down-Converters for Solid State Lighting

Quantum dots (QDs) have been used in commercial solid-state lighting (SSL) applications to improve the energy efficiency of light generation at warm color temperatures. By increasing the amount of QDs used in each product, further energy savings are possible; however, traditional QDs contain cadmium, which has regulatory limits on its concentration in consumer products. As described within this final technical report, we have established that heavy-metal free QDs made from indium phosphide (InP) exhibit highly efficient emission at the temperatures and fluxes relevant to SSL. However, the maintenance of this emission is compromised during long term operation due to QD oxidation. We have identified multiple methods to slow the oxidation rate, which has improved the operational stability of these materials more than 200 times longer than at the project start. Beyond these improvements, heavy-metal free QDs require a further hundred-fold increase in stability to enable use in mid-power SSL and a ten-fold increase in stability to enable use in diffuse SSL applications. The outcomes of this project demonstrate feasibility for the use of heavy-metal free QDs in commercial SSL applications with potential use in diffuse SSL applications in the near term (1-2 years) pending market need.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Sequential Infiltration Synthesis of Multinary Metal Oxides: The Role of Precursor Diffusion and Reactivity

Understanding volatile metal–organic precursor transport in polymer matrices during sequential infiltration synthesis (SIS) is critical to the design of hybrid materials of tailored composition and uniform structure. Here, we investigate the diffusion and reaction behavior of diethylzinc (DEZ) in poly(methyl methacrylate) (PMMA) matrices with variable indium and zinc incorporation. Unlike conventional SIS where precursors adduct or react directly with the polymer backbone, DEZ shows minimal interaction with PMMA. However, DEZ may interact strongly with In–OH or Zn–OH moieties that are previously incorporated into a PMMA thick film. Using spectroscopic ellipsometry, X-ray photoelectron spectroscopy depth profiling, and EDX line scans, we quantify Zn incorporation as a function of exposure time, polymer thickness, and previous infiltration steps. The Zn distribution evolves from surface-localized to deep within the ∼1 μm thick film with increasing DEZ exposures up to 30 min. A reaction-diffusion model incorporating a hindering factor to capture diffusivity decay due to product accumulation reproduces the Zn depth profile and yields physically meaningful parameters to guide future growth. Furthermore, this study provides a framework for interpreting metal–organic precursor infiltration behavior and highlights the utility of model-guided SIS process design.

diethylzinc↗
DOE OSTI2021

Effects of strain, disorder, and Coulomb screening on free-carrier mobility in doped cadmium oxide

Here, the interplay of stress, disorder, and Coulomb screening dictating the mobility of doped cadmium oxide (CdO) is examined using Raman spectroscopy to identify the mechanisms driving dopant incorporation and scattering within this emerging infrared optical material. Specifically, multi-wavelength Raman and UV-vis spectroscopies are combined with electrical Hall measurements on a series of yttrium (X = Y) and indium (X = In) doped X:CdO thin-films. Hall measurements confirm n-type doping and establish carrier concentrations and mobilities. Spectral fitting along the low-frequency Raman combination bands, especially the TA+TO(X) mode, reveals that the evolution of strain and disorder within the lattice as a function of dopant concentration is strongly correlated with mobility. Coupling between the electronic and lattice environments was examined through analysis of first- and second-order longitudinal–optical phonon–plasmon coupled modes that monotonically decrease in energy and asymmetrically broaden with increasing dopant concentration. By fitting these trends to an impurity-induced Fröhlich model for the Raman scattering intensity, exciton–phonon and exciton–impurity coupling factors are quantified. These coupling factors indicate a continual decrease in the amount of ionized impurity scattering with increasing dopant concentration and are not as well correlated with mobility. This shows that lattice strain and disorder are the primary determining factors for mobility in donor-doped CdO. In aggregate, the study confirms previously postulated defect equilibrium arguments for dopant incorporation in CdO while at the same time identifying paths for its further refinement.

42 ENGINEERING↗
DOE OSTI2022

A Molten Salt Electrochemical Process for the Preparation of Cost-Effective p-Block (Coating) Materials

Solar energy applications rely heavily on p-block elements and transition metals. Silicon is, by far, the most commonly used material in photovoltaic cells and accounts for about 85% of modules sold presently. Of late, thin film photovoltaic cells have gained momentum because of their higher efficiencies. Most of these thin film devices are made out of just five elements, namely, cadmium, tellurium, selenium, indium, gallium and copper. The present manuscript describes an elegant and inexpensive molten salt-based electrolytic process for fabricating a tellurium-coated metallic substrate. A three-electrode set up was employed to coat iridium with tellurium from a molten bath containing lithium chloride, lithium oxide and tellurium tetrachloride (LiCl-Li 2 O-TeCl 4 ) at 650 °C for a duration ranging from 30 to 120 min under a galvanostatic mode. The tellurium coating was observed to be thick, uniform, smooth and homogeneous. Additionally, the deposited tellurium did not chemically react with the iridium substrate to form intermetallic compounds, which is a good feature from the standpoint of the device’s performance characteristics. The present process, being generic in nature, shows the potential for the manufacture of both the coated substates and high-purity elements not just for tellurium but also for other p-block elements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Indium and thallium extraction into betainium bis(trifluoromethylsulfonyl)imide ionic liquid from aqueous hydrochloric acid media

The partitioning behavior of indium and thallium ions between aqueous hydrochloric acid solutions and hydrophobic betainium bis(trifluoromethylsulfonyl)imide ionic liquid was studied using a standard liquid–liquid extraction technique. The experiments were mainly carried out by means of a radiochemical method, using 111 In and 201 Tl medical radionuclides at an ultra-trace concentration. Both mono- and trivalent thallium were utilized and the highest oxidation state (3+) was produced by adding either chlorine or bromine water to the aqueous phase prior to extraction. The metal ion transfer was optimized by varying the aqueous concentration of hydrochloric acid and by introducing zwitterionic betaine as an extracting agent into the aqueous phase. It was found that the highest D values of In(III), Tl(III) and Tl(I) in the investigated chemical systems were up to 200, 70, and 1, respectively. The influence of the addition of lithium salt, having common with the ionic liquid counterion, and the variation of mixing time on the distribution ratio of the metal ions were also studied. Finally, to understand the underlying extraction mechanism of the metal ions and to propose the predominant extracted species, mathematical models based on ion pair formation and ion exchange were developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Product Distribution of Acetylene Dimerization through Bimetallic Metal–Organic Framework-Supported Nanoporous Systems

Metal-organic frameworks (MOFs) are receiving increased attention due to their well-defined structures that allow the determination of structure-property relationships. MOFs have been used as heterogeneous catalyst supports in a variety of fashions including for confinement of metal nanoparticles, which have demonstrated enhanced resistance to aggregation, a common issue in amorphous metal oxide supports. Cu and In catalysts were installed in the Zr-based MOF NU-907, being confined within the nanoporous structure. The Cu catalyst is known to, under various conditions, either selectively hydrogenate acetylene to ethylene or generate C4 products such as butenes and 1,3-butadiene, an important feedstock for rubber and adhesives. The addition of indium to the Cu catalyst is intended to serve as a promoter to produce C4 products by decreasing the surface coverage of copper while still allowing for C-C coupling. When employed for acetylene dimerization, InCu-NU-907 shows slightly decreased C4 production overall but enhanced 1,3-butadiene production compared to all other catalysts studied herein. These catalysts were thoroughly characterized by a range of techniques to confirm structural integrity and porosity and probe the nature of the interactions of indium with the Cu nanoparticle active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Emissive Colloidal GaAs Quantum Dots

Colloidal quantum dots offer tunable optical properties for optoelectronic applications, but the synthesis of high-quality III–V quantum dots (QDs) other than indium pnictides, and particularly GaAs, has remained elusive due to synthetic challenges. Colloidal GaAs QDs have been reported very recently and have shown only weak band-edge photoluminescence. Here, we demonstrate a large-scale synthesis of colloidal GaAs QDs in molten salts, followed by a high-temperature surface treatment with K 2 S, which removes native oxide and enables uniform zinc chalcogenide shell growth on GaAs. These QDs demonstrate bright band-edge photoluminescence and electroluminescence in QD LED devices. Low-temperature spectroscopy reveals a well-resolved exciton fine structure with distinct bright-state splitting and temperature-independent decay dynamics from 4 to 100 K. These results establish a practical pathway for the preparation of high-quality colloidal GaAs QDs from molten salts with potential applications in quantum technologies and optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Task 12 PV Sustainability - Environmental Life Cycle Assessment of Residential PV and Battery Storage Systems

Using a life cycle assessment (LCA), the environmental impacts from generating 1 kWh of electricity for self-consumption via a photovoltaic-battery system are determined. The system includes a 10 kWp multicrystalline-silicon photovoltaic (PV) system (solar irradiation about 1350 kWh/m2/year and annual yield 1000 kWh/kWp), an iron phosphate lithium-ion (LiFePO4) battery, and other components such as the control system, battery housing, and two inverters (one for the PV system and one for the battery system). Three options for the AC-coupled system with changing battery capacities (5, 10, or 20 kWh nominal capacity) are investigated. The environmental impacts are assessed using the indicators greenhouse gas emissions and cumulative energy demand (separated into total and non-renewable cumulative energy demand). In addition, the four most important impact categories for PV electricity - respiratory inorganics (particulate matter), acidification, energy carrier resource use, and minerals and metals resource use - are assessed according to the environmental footprint (EF) method. Data are drawn from the DETEC data DQRv2:2018, recent literature, and product details provided by manufacturers. The results show larger environmental impacts of PV-battery systems with increasing battery capacity; for capacities of 5, 10, and 20 kWh, the cumulative greenhouse gas emissions from 1 kWh of electricity generation for self-consumption via a PV-battery system are 80, 84, and 88 g CO 2- eq/kWh, respectively. The cumulative greenhouse gas emissions of PV electricity consumed directly or fed into the grid are 54 g CO 2 -eq/kWh. The corresponding total cumulative energy demands are 5.27, 5.40, and 5.50 MJ oil-eq/kWh, with non-renewable energy carriers contributing 1.16, 1.22, and 1.29 MJ oil-eq/kWh. In the investigated EF impact categories, we similarly observe a larger environmental burden with increasing battery capacity, except in the use of minerals and metals. Our sensitivity analyses show that using a nickel cobalt manganese oxide (NCM) lithium-ion battery, instead of an LiFePO 4 battery, leads to a comparable environmental impact in terms of greenhouse gas emissions and cumulative energy demand. However, the NCM battery increases the impact in the EF categories of acidification and respiratory inorganics by 7 and 10%, respectively, whereas energy carrier resource use decreases by 4% and minerals and metals resource use decrease by 1%. Using a copper indium selenium (CIS) PV panel instead of a multicrystalline-silicon decreases greenhouse gas emissions by 24%, non-renewable cumulative energy demand by 13%, and particulate matter emissions by 60% (the largest decrease). Furthermore, the calculated environmental impacts are sensitive to the assumed battery lifetime. A decrease from 5000 to 3000 charge cycles increases non-renewable cumulative energy demand by 24% and greenhouse gas emissions by 16%. Increasing from 5000 to 7000 charge cycles decreases the environmental impacts by 6% and 7% in terms of non-renewable cumulative energy demand and greenhouse gas emissions, respectively. A utility-scale battery system case study shows that using batteries to store PV electricity overproduction reduces greenhouse gas emissions compared to using natural gas backup electricity generation.

14 SOLAR ENERGY↗
DOE OSTI2020

The Subchalcogenides Ir 2 In 8 Q (Q = S, Se, Te): Dirac Semimetal Candidates with Re-entrant Structural Modulation

Subchalcogenides are uncommon compounds where the metal atoms are in unusually low formal oxidation states. They bridge the gap between intermetallics and semiconductors and can have unexpected structures and properties because of the exotic nature of their chemical bonding as they contain both metal–metal and metal–main group (e.g., halide, chalcogenide) interactions. Finding new members of this class of materials presents synthetic challenges as attempts to make them often result in phase separation into binary compounds. We overcome this difficulty by utilizing indium as a metal flux to synthesize large (millimeter scale) single crystals of novel subchalcogenide materials. Herein, we report two new compounds Ir 2 In 8 Q (Q = Se, Te) and compare their structural and electrical properties to the previously reported Ir 2 In 8 S analogue. Ir 2 In 8 Se and Ir 2 In 8 Te crystallize in the $P_{4_2}$/mnm space group and are isostructural to Ir2In8S, but also have commensurately modulated (with q vectors q = 1/6a* + 1/6b* and q = 1/10a* + 1/10b* for Ir 2 In 8 Se and Ir 2 In 8 Te, respectively) low-temperature phase transitions, where the chalcogenide anions in the channels experience a distortion in the form of In–Q bond alternation along the ab plane. Both compounds display re-entrant structural behavior, where the supercells appear on cooling but revert to the original subcell below 100 K, suggesting competing structural and electronic interactions dictate the overall structure. Notably, these materials are topological semimetal candidates with symmetry-protected Dirac crossings near the Fermi level and exhibit high electron mobilities (~1500 cm 2 V –1 s –1 at 1.8 K) and moderate carrier concentrations (~10 20 cm –3 ) from charge transport measurements. This work highlights metal flux as a synthetic route to high quality single crystals of novel intermetallic subchalcogenides with Dirac semimetal behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Revealing the intrinsic transport properties of antiperovskite Sr 3 SnO thin films

A topologically non-trivial band structure and reports of superconductivity have motivated significant investigation into the transport properties of the antiperovskite oxide Sr 3 SnO. Phase-pure films of Sr 3 SnO can be grown by molecular beam epitaxy, but they do not have the required extremely high hole-doping densities (>1 × 10 21 cm –3 ) for which superconductivity has been observed in bulk materials. To date, high hole-doping densities have been achieved via inducing strontium deficiency, which inevitably results in impurity phases. Here, we show that indium acts as an effective hole dopant in Sr 3 SnO and can be used to achieve high hole doping densities in stoichiometric films. Films with carrier densities as high as 1.5 × 10 21 cm –3 remain non-superconducting. We, therefore, suggest that Sr 3 SnO is probably not an intrinsic superconductor. A second question addressed in this work is the measurement of the intrinsic electrical transport properties of Sr 3 SnO, given its rapid degradation in air. We show that even in inert atmospheres, reducing the time needed for establishing electrical contacts and protecting the Sr 3 SnO film result in improved electrical properties. Here, we demonstrate low carrier density films (4 × 10 18 cm –3 ) with carrier mobilities of 400 cm 2 V –1 s –1 at 10 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heteroepitaxial chemistry of zinc chalcogenides on InP nanocrystals for defect-free interfaces with atomic uniformity

Heteroepitaxy on colloidal semiconductor nanocrystals is an essential strategy for manipulating their optoelectronic functionalities. However, their practical synthesis typically leads to scattered and unexpected outcomes due to the intervention of multiple reaction pathways associated with complicated side products of reactants. Here, the heteroepitaxy mechanism of zinc chalcogenide initiated on indium phosphide (InP) colloidal nanocrystals is elucidated using the precursors, zinc carboxylate and trialkylphosphine selenide. The high magnetic receptivity of 77 Se and the characteristic longitudinal optical phonon mode of ZnSe allowed for monitoring the sequence of epilayer formation at the molecular level. The investigation revealed the sterically hindered acyloxytrialkylphosphonium and diacyloxytrialkylphosphorane to be main intermediates in the surface reaction, which retards the metal ion adsorption by a large steric hindrance. The transformation of adsorbates to the crystalline epilayer was disturbed by surface oxides. Raman scattering disclosed the pathway of secondary surface oxidation triggered by carboxylate ligands migrated from zinc carboxylate. The surface-initiated heteroepitaxy protocol is proposed to fabricate core/shell heterostructured nanocrystals with atomic-scale uniformity of epilayers. Despite the large lattice mismatch of ZnS to InP, we realised a uniform and interface defect-free ZnS epilayer (~0.3 nm thickness) on InP nanocrystals, as evidenced by a high photoluminescence quantum yield of 97.3%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗