Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Electrochemical performance investigations on the hydrogen depolarized CO2 concentrator

An extensive investigation of anode and cathode polarization in complete cells and half cells was conducted to determine the factors affecting HDC electrode polarization and the nature of this polarization. Matrix-electrolyte-electrode interactions and cell electrolyte composition were also investigated. The electrodes were found to have normal performance capabilities. The HDC anode polarization characteristics were correlated with a theoretical kinetic analysis; and, except for some quantitative details, a rather complete understanding of the causes for HDC electrode polarization was formulated. One of the important finding resulting from the kinetic analysis was that platinum appears to catalyze the decomposition of carbonic acid to carbon dioxide and water. It was concluded that the abnormal voltage performance of the One Man ARS HDC cells was caused by insufficient cell electrolyte volume under normal operating conditions due to deficiencies in the reservoir to cell interfacing.

Aylward, J. R.↗

Molecular correlations with fracture in fibers and granular-filled composites

Results are presented for an experimental electron spin resonance study of chain-scission kinetics in oriented nylon fibers and in granular-filled elastomer composites. A reaction-rate molecular model is proposed as a tool to predict failure under various loadings. The model assumes a statistical distribution in stress on the polymeric chain structure. Interfacial failure in the filled composites is examined. Failure at the interface between the filler and the matrix may be largely adhesive or cohesive, depending on the magnitude of the interactive forces. It appears that the mechanical behavior of both single-component and filled composites depends on the composite nature of the structure. The electron spin resonance technique is shown to be suitable for experimental observation of phenomena directly related to atomic occurrences.

Devries, K. L.↗

Advanced methods for preparation and characterization of infrared detector materials

Mercury cadmium telluride crystals were prepared by the Bridgman method with a wide range of crystal growth rates and temperature gradients adequate to prevent constitutional supercooling under diffusion-limited, steady state, growth conditions. The longitudinal compositional gradients for different growth conditions and alloy compositions were calculated and compared with experimental data to develop a quantitative model of the crystal growth kinetics for the Hg(i-x)CdxTe alloys, and measurements were performed to ascertain the effect of growth conditions on radial compositional gradients. The pseudobinary HgTe-CdTe constitutional phase diagram was determined by precision differential thermal analysis measurements and used to calculate the segregation coefficient of Cd as a function of x and interface temperature. Computer algorithms specific to Hg(1-x)CdxTe were developed for calculations of the charge carrier concentrations, charge carrier mobilities, Hall coefficient, optical absorptance, and Fermi energy as functions of x, temperature, ionized donor and acceptor concentrations, and neutral defect concentrations.

Lehoczky, S. L.↗

A Gas-Kinetic Method for Hyperbolic-Elliptic Equations and Its Application in Two-Phase Fluid Flow

A gas-kinetic method for the hyperbolic-elliptic equations is presented in this paper. In the mixed type system, the co-existence and the phase transition between liquid and gas are described by the van der Waals-type equation of state (EOS). Due to the unstable mechanism for a fluid in the elliptic region, interface between the liquid and gas can be kept sharp through the condensation and evaporation process to remove the "averaged" numerical fluid away from the elliptic region, and the interface thickness depends on the numerical diffusion and stiffness of the phase change. A few examples are presented in this paper for both phase transition and multifluid interface problems.

Xu, Kun↗

A proposed non-intrusive method for finding coefficients of slip and molecular reflectivity in microgravity

A proposed experimental program to look at a series of vapor transport properties measured along solid and liquid surfaces is described. The research objectives proposed are: (1) with accuracy otherwise unobtainable on ground, to determine the coefficient of slip measured between gases and the surfaces of liquids and solids; (2) for the first time, to classify and tabulate dominant surface effects found for a variety of solids, particularly those crystalized by vapor transport; and (3) to extend understanding of settling rates predicted for cosmic dust and condensed vapor falling through planetary atmospheres. The method used to obtain these objectives, has aided, to an order of magnitude, understanding of various liquid-gas interfaces such as oil and water. But to date, no similar characterization has proved successful for solids or liquids of uncertain densities. Likewise, no data exist in either ground-based research or as part of a microgravity program that, when collected with the high accuracy expected in low gravity, could definitely settle outstanding questions in kinetic theory, molecular dynamics, and cosmic physics.

Noever, D. A.↗

Kinetic Kelvin-Helmholtz instability at a finite sized object

Two-dimensional hybrid simulations with particle ions and fluid electrons are used to calculate the kinetic evolution of the self-consistent flow around a two-dimensional obstacle with zero intrinsic magnetic field. Plasma outlfow from the obstacle is used to establish a boundary layer between the incoming solar wind and the outgoing plasma. Because the self-consistent flow solution, a velocity shear is naturally set up at this interface, and since the magnetic field for these simulations is transverse to this flow, the Kelvin-Helmholtz (K-H) instability can be excited at low-velocity shear. Simulations demonstrate the existence of the instability even near the subsolar location, which normally is thought to be stable to this instability. The apparent reason for this result is the overall time dependence at the boundary layer, which gives rise to a Rayleigh-Taylor like instability which provides seed perturbations for the K-H instability. These results are directly applicable to Venus, comets, artificial plasma releases, and laser target experiments. This result has potentially important ramifications for the interpretation of observational results as well as for an estimation of the cross-field transport. The results suggest that the K-H instability may play a role in dayside processes and the Venus ionopause, and may exist within the context of more general situations, for example, the Earth's magnetopause.

Thomas, V. A.↗

Accessing and Understanding MODIS Data

The National Aeronautics and Space Administration (NASA) launched the Terra satellite in December 1999, as part of the Earth Science Enterprise promotion of interdisciplinary studies of the integrated Earth system. Aqua, the second satellite from the series of EOS constellation, was launched in May 2002. Both satellites carry the MODerate resolution Imaging Spectroradiometer (MODIS) instrument. MODIS data are processed at the Goddard Space Flight Center, Greenbelt, MD, and then archived and distributed by the Distributed Active Archive Centers (DAACs). Data products from the MODIS sensors present new challenges to remote sensing scientists due to specialized production level, data format, and map projection. MODIS data are distributed as calibrated radiances and as higher level products such as: surface reflectance, water-leaving radiances, ocean color and sea surface temperature, land surface kinetic temperature, vegetation indices, leaf area index, land cover, snow cover, sea ice extent, cloud mask, atmospheric profiles, aerosol properties, and many other geophysical parameters. MODIS data are stored in HDF- EOS format in both swath format and in several different map projections. This tutorial guides users through data set characteristics as well as search and order interfaces, data unpacking, data subsetting, and potential applications of the data. A CD-ROM with sample data sets, and software tools for working with the data will be provided to the course participants.

Leptoukh, Gregory↗

Interdiffusional effects between tungsten fibers and an iron-nickel-base alloy

Tungsten fibers in the INCOLOY 903 alloy were annealed for over 100 hours at 1038 C and 1200 C. It was found that interdiffusion results in the formation of a reaction zone. SEM-EDS probe analysis showed that the chemistries across this zone were constant, suggesting the zone was a compound phase. The composition of the compound was estimated to be that of a mu-type phase. The local chemistry (in atomic percent) at the reaction zone/alloy matrix interface was found to be approximately 8 pct W, 1.2 pct Nb, 40 pct Fe, 14 pct Co, and 36 pct Ni. In addition, recrystallization was observed in both the remaining tungsten fiber and the nearby INCOLOY 903 matrix after annealing at 1200 C, but not at 1038 C. The results of this study suggest that reaction zone growth kinetics can be minimized by the reduction of Co and Fe and the increase of W in the matrix alloy.

Caulfield, T.↗

Hybrid Kinetic Model of the Interaction Between the Dense Plasma Clouds and Magnetospheric Plasma on Large Time and Spatial Scales, and Comparison With MMS Observations

We present a new simulation results of the cloud dynamics in the ambient magnetospheric plasma on the large time and spatial scales. It was assumed that these impulsive structures observed by the MMS spacecraft originally were created because of the reconnection at the magnetopause. Our new 3-D hybrid kinetic modeling on the large time and spatial scales captures several of these processes: an excitation of the electromagnetic waves (whistler and shear-Alfvén waves) and plasma instabilities (mirror and flute); a formation of shock waves, and collapsing diamagnetic cavity; particle acceleration. A strong overshoot in plasma density profile was observed in the modeling and MMS observation at the interface between the cloud and magnetospheric plasma. The cloud expansion into ambient magnetospheric plasma causes the flute waves connected with excitation of the Rayleigh-Taylor instability observed at the overshoot in plasma density profile across the external magnetic field. The modeling demonstrates a formation of the whistler waves at the initial stage which propagate in the external magnetic field direction. At the later stage, a formation of shear-Alfvén waves was observed

A. S. Lipatov↗

TEMPORAL EVOLUTION OF SUB-NANOMETER COMPOSITIONAL PROFILES ACROSS THE GAMMA/GAMMA' INTERFACE IN A MODEL Ni-Al-Cr SUPERALLOY

Early-stage phase separation in a Ni-5.2 Al-14.2 Cr at.% superalloy, isothermally decomposing at 873 K, is investigated with atom-probe tomography. Sub-nanometer scale compositional profiles across the gamma/gamma'(L12) interfaces demonstrate that both the gamma-matrix and the gamma'-precipitate compositions evolve with time. Observed chemical gradients of Al depletion and Cr enrichment adjacent to the gamma'-precipitates are transient, consistent with well-established model predictions for diffusion-limited growth, and mark the first detailed observation of this phenomenon. Furthermore, it is shown that Cr atoms are kinetically trapped in the growing precipitates.

Sudbrack, Chantal K.↗

Parallel Simulation of Unsteady Turbulent Flames

Time-accurate simulation of turbulent flames in high Reynolds number flows is a challenging task since both fluid dynamics and combustion must be modeled accurately. To numerically simulate this phenomenon, very large computer resources (both time and memory) are required. Although current vector supercomputers are capable of providing adequate resources for simulations of this nature, the high cost and their limited availability, makes practical use of such machines less than satisfactory. At the same time, the explicit time integration algorithms used in unsteady flow simulations often possess a very high degree of parallelism, making them very amenable to efficient implementation on large-scale parallel computers. Under these circumstances, distributed memory parallel computers offer an excellent near-term solution for greatly increased computational speed and memory, at a cost that may render the unsteady simulations of the type discussed above more feasible and affordable.This paper discusses the study of unsteady turbulent flames using a simulation algorithm that is capable of retaining high parallel efficiency on distributed memory parallel architectures. Numerical studies are carried out using large-eddy simulation (LES). In LES, the scales larger than the grid are computed using a time- and space-accurate scheme, while the unresolved small scales are modeled using eddy viscosity based subgrid models. This is acceptable for the moment/energy closure since the small scales primarily provide a dissipative mechanism for the energy transferred from the large scales. However, for combustion to occur, the species must first undergo mixing at the small scales and then come into molecular contact. Therefore, global models cannot be used. Recently, a new model for turbulent combustion was developed, in which the combustion is modeled, within the subgrid (small-scales) using a methodology that simulates the mixing and the molecular transport and the chemical kinetics within each LES grid cell. Finite-rate kinetics can be included without any closure and this approach actually provides a means to predict the turbulent rates and the turbulent flame speed. The subgrid combustion model requires resolution of the local time scales associated with small-scale mixing, molecular diffusion and chemical kinetics and, therefore, within each grid cell, a significant amount of computations must be carried out before the large-scale (LES resolved) effects are incorporated. Therefore, this approach is uniquely suited for parallel processing and has been implemented on various systems such as: Intel Paragon, IBM SP-2, Cray T3D and SGI Power Challenge (PC) using the system independent Message Passing Interface (MPI) compiler. In this paper, timing data on these machines is reported along with some characteristic results.

Menon, Suresh↗

Preparation and Analysis of RNA Crystals

The crystallization of RiboNucleic Acids (RNA) was studied from the standpoint of mechanisms of crystal growth in three tasks: (1) preparation of high-quality crystals of oligonuclotides for X-ray diffraction, (2) finding pathways to the growth of high-quality crystals for X-ray diffraction and (3) investigation of mechanisms of action of inertial acceleration on crystal growth. In these tasks: (1) RNA crystals were prepared and studied by X-ray diffraction; (2) a pathway to high-quality crystals was discovered and characterized; a combination of kinetic and equilibrium factors could be optimized as described below; and (3) an interplay between purity and gravity was found in a combination of space and ground experiments with nucleic acids and proteins. Most significantly, the rate of concentration of precipitant and RNA can be controlled by membrane-based methods of water removal or by diffusion of multivalent cations across an interface stabilized by a membrane. Oligonucleotide solutions are electrokinetically stabilized colloids, and crystals can form by the controlled addition of multivalent cations.

Todd, Paul↗

Interfacial geometry and D-variation effects in two-phase systems

Numerical solutions of the governing diffusion equation for two-phase concentration dependent diffusion coefficients are examined. Solutions were also calculated for planar, cylindrical, and spherical geometries to compare the effect of interface geometries with those caused by concentration-dependent diffusion coefficients, and two methods of averaging D were considered to determine the best averaging method for different types of D-variations. The effects of interface-location criteria on mass conservation and convergence of interface location, diffusion coefficient variation in the alpha and beta-phases of a two-phase binary alloy system, effect of D(alpha) variation in a cylindrical couple on beta-phase thickness, and geometry and D-variation effects on the degree of homogenization were determined. It is concluded that typical D(alpha)-variations can have a greater influence on the kinetics of interdiffusion than the geometry.

Tenney, D. R.↗

Buoyancy Driven Shear Flows of Bubble Suspensions

In this work the gas volume fraction and the root-mean-squared fluid velocity are measured in buoyancy driven shear flows of bubble suspensions in a tall, inclined, rectangular channel. The experiments are performed under conditions where We << 1a nd Re >> 1, for which comparisons are made with kinetic theory and numerical simulations. Here Re = gamma(a(exp 2)/nu is the Reynolds number and We = rho(gamma(exp 2))a(exp 3)/sigma is the Weber number; gamma is the shear rate, a is the bubble radius, nu is the kinematic viscosity of the liquid, rho is the density of the liquid, and sigma is the surface tension of the gas/liquid interface. Kang et al. calculated the bubble phase pressure and velocity variance of sheared bubble suspensions under conditions where the bubbles are spherical and the liquid phase velocity field can be approximated using potential flow theory, i.e. We= 0 and Re >> 1. Such conditions can be achieved in an experiment using gas bubbles, with a radius of O(0.5mm), in water. The theory requires that there be no average relative motion of the gas and liquid phases, hence the motivation for an experimental program in microgravity. The necessity of performing preliminary, Earth based experiments, however, requires performing experiments where the gas phase rises in the liquid, which significantly complicates the comparison of experiments with theory. Rather than comparing experimental results with theory for a uniform, homogeneous shear flow, experiments can be compared directly with solutions of the averaged equations of motion for bubble suspensions. This requires accounting for the significant lift force acting on the gas phase when the bubbles rise parallel to the average velocity of the sheared suspension. Shear flows can be produced in which the bubble phase pressure gradient, arising from shear induced collisions amongst the bubbles, balances a body force (centrifugal or gravitational) on the gas phase. A steady, non-uniform gas volume fraction can be measured, from which the bubble phase pressure gradient can be obtained and compared to theory and numerical simulations. The presence of bounding walls further complicates the experiments, since the detailed interactions of the bubbles with bounding walls is not well understood, especially in the presence of gravity, where the momentum and energy exchange depends on the inclination of the wall.

Koch, D. L.↗

Morphological instability in rapid directional solidification

Mullins and Sekerka (1964) showed for fixed temperature gradient that the planar interface is linearly stable for all pulling speeds V above some critical value, the absolute stability limit. Near this limit, where solidification rates are rapid, the assumption of local equilibrium at the interface may be violated. Here, nonequilibrium effects are incorporated into a linear stability analysis of the planar front by allowing the segregation coefficient and interface temperature to depend on V in a thermodynamically consistent way. The absolute stability limit of the cellular mode is modified. A new oscillatory state is formed which, in the absence of latent heat, has a critical wavenumber of zero; by itself this instability would lead to the formation of solute bands in the solid. This mode has its own absolute-stability limit determined by solute trapping and kinetics. Under certain conditions, there exists a window of stability above the steady absolute-stability boundary and below the oscillatory-stability boundary; here the planar segregation-free state is restabilized.

Merchant, G. J.↗

Microscale Processes Determining Macroscale Evolution of Magnetic Flux Tubes along Earth’s Magnetopause

An important process affecting solar wind-Earth’s magnetosphere coupling is non-steady dayside magnetic reconnection, observationally evidenced by a flux-transfer-event (FTE) that shows a bipolar variation of the magnetic field component normal to the magnetopause. FTEs often consist of two interlinked flux tubes, but, local kinetic processes between the flux tubes are not understood in the context of the FTE structuring, evolution, and impact. An FTE observed by MMS on 18 December 2017 consisted of two flux tubes of different topology. One includes field lines with ends connected to the northern and southern hemispheres while the other includes field lines with both ends connected to the magnetosheath. Reconnection occurring at the flux-tube interface indicates how interacting flux tubes evolve into a flux rope with helical magnetic topology that is either closed or open. This study demonstrates a new aspect of how micro-to meso-scale dynamics occurring within FTEs determines their macroscale characteristics and evolution.

Solar-terrestrial interactions↗

Thermal oxidation of single-crystal silicon carbide - Kinetic, electrical, and chemical studies

This paper presents kinetic data from oxidation studies of the polar faces for 3C and 6H SiC in wet and dry oxidizing ambients. Values for the linear and parabolic rate constants were obtained, as well as preliminary results for the activation energies of the rate constants. Examples are presented describing how thermal oxidation can be used to map polytypes and characterize defects in epitaxial layers grown on low tilt angle 6H SiC substrates. Interface widths were measured using Auger electron spectroscopy (AES) with Ar ion beam depth profiling and variable angle spectroscopic ellipsometry (VASE) with effective medium approximation (EMA) models. Preliminary electrical measurements of MOS capacitors are also presented.

Petit, J. B.↗