Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Open-air spray deposition of PCBM/BCP electron transport layer for inverted perovskite solar cells

A [6,6]-phenyl C61 butyric acid methyl ester (PCBM) and bathocuproine (BCP) electron transport layer (ETL) is spray deposited in open air directly on top of a perovskite at linear speeds of 9 m/min. The PCBM precursor ink contains a binary mixture of 1:1 chlorobenzene:chloroform, which optimizes spray wettability on the perovskite surface and allows quick solvent evaporation. A near-infrared heating module additionally provides a flash cure (<5 s) for the formation of smooth, large-area PCBM films (∼20 cm 2 ). A BCP solution in isopropanol is subsequently sprayed to form an ultrathin (<5 nm) film and characterized with a suite of high-resolution metrologies. The spray-deposition processing and near-infrared treatment do not damage the underlying perovskite. Inverted architecture devices containing the sprayed ETL achieve a champion efficiency of 20.3% and demonstrate stable performance without additional interlayers or surface treatments. Here, the technoeconomic cost of the open-air spray process is compared against traditional vacuum-based evaporation, resulting in a decrease in manufacturing costs by 26%.

14 SOLAR ENERGY↗
DOE OSTI2024

In situ oxidation of reduced graphene oxide membranes by peracetic acid for dye desalination

Graphene oxide (GO) membranes with tunable interlayer spacings are of interest for dye removal from salty textile wastewater, and the membranes are often reduced to improve their stability, which inevitably lowers water permeance. Herein, we demonstrate that reduced GO (rGO) membranes can be facilely modified using peracetic acid (PAA) in situ to dramatically enhance water permeance while retaining dye rejection. Specifically, PAA-modified membranes (PrGO) are synthesized by vacuum-filtering hydrazine-reduced rGO nanosheets onto Nylon substrate and then exposing them to PAA solutions. The effects of the rGO layer thickness, PAA content, and PAA exposure time on the membrane chemistry, nanostructures, and salt/dye separation properties are thoroughly examined. For example, the PAA oxidation of a 100 nm-thick rGO membrane for 10 min increases water permeance by 180 %, from 35 to 93 Liter m −2 h −1 bar −1 , and decreases Na 2 SO 4 rejection from 10 % to 3.3 % while retaining the rejection of Congo red at ≈99.7 %. The PrGO membranes exhibit stable water permeance and >99 % dye rejection in multi-cycle tests in a crossflow system, surpassing state-of-the-art GO membranes and showcasing their potential for practical applications.

Dye desalination↗
DOE OSTI2025

Low-symmetry polymorph of GaP upends bonding paradigms of metallic high-pressure III–V compounds

Here, the pressure-induced polymorphism of binary octet compounds has long been considered a settled problem although the possible atomic disordering of some phases remains a puzzling observation. Taking GaP as a case study, we conclude, through x-ray microdiffraction and first-principles calculations, that its high-pressure metallic phase (previously reported as being disordered) adopts in fact an ordered base-centered monoclinic structure previously unknown in this class of compounds. The formation of layered patterns with variable degrees of interlayer dimerization, as observed in GaP, marks a paradigm shift of our understanding of ordering in octet high-pressure phases which calls for a more extensive re-examination. A rich polymorphism with fine tuning of chemical and physical properties can be envisioned.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Scalable slot-die coating of phyllosilicate membranes for selective ion separations

Abstract Two-dimensional (2D) materials have recently drawn attention as candidate materials for molecular-scale membrane separations due to their tunable nanoscale interlayer properties. Phyllosilicates, a broad class of naturally abundant 2D clay minerals, offer significant advantages over synthetic 2D materials, including low cost, stability, and environmental compatibility. While these properties make phyllosilicates attractive for industrial-scale nanofiltration applications, phyllosilicate-based membranes have, to date, only been fabricated at the lab scale via vacuum filtration. Scalable fabrication methods are essential to advance the technical maturity of phyllosilicate membranes and bring these promising materials closer to large-scale adoption. Herein, we have successfully scaled up phyllosilicate (vermiculite) membrane fabrication via slot-die coating and roll-to-roll coating of an ethylenediamine–vermiculite (EDAVM) mixture onto nylon. The coated membranes are 1–2 μm $ \unicode{x03BC} \mathrm{m} $ mu m in thickness and exhibit similar structure and performance to vacuum-filtered EDAVM membranes. The membranes also show selectivity for monovalent ions over multivalent ions in binary salt mixtures. This work represents a major step toward scaling up phyllosilicate membranes for industrial ion separation applications such as resource recovery from water.

Booth, Austin [Princeton University]↗
DOE OSTI2025

Nanoscale Structure and Interfacial Electrochemical Reactivity of Moiré-Engineered Atomic Layers

Here, the electronic properties of atomically thin van der Waals (vdW) materials can be precisely manipulated by vertically stacking them with a controlled offset (for example, a rotational offset─i.e., twist─between the layers, or a small difference in lattice constant) to generate moiré superlattices. In recent years, the application of this “twistronics” concept to interfacial electrochemistry has unveiled unique pathways for tailoring the electrochemical reactivity. Furthermore, this Account provides an overview of our work that leveraged a suite of structural characterization methods, such as interferometric four-dimensional scanning transmission electron microscopy, dark-field transmission electron microscopy, and scanning tunneling microscopy, along with nanoscale electrochemical measurement techniques, namely, scanning electrochemical cell microscopy (SECCM), to uncover and dissect the profound impact of electrode electronic structure, controlled by interlayer twist, on interfacial electron transfer kinetics.

Charge transfer↗
DOE OSTI2025

Truncating 2D Framework Materials Down to a Single Pore: Synthetic Approaches and Opportunities

Here, in this Accounts article, we summarize our recent work on truncating conjugated two-dimensional framework materials down to a single pore, or a single macrocycle. Conjugated 2D architectures have emerged as one of the most synthetically adaptable motifs for coupling semiconductivity and porosity in metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). However, despite their prevalence, 2D architectures have several limitations. In particular, the strong interlayer π–π stacking can limit both processability and the accessibility of internal active sites. We have found that simple macrocycles preserve key aspects of 2D framework structure and function, including porosity and out-of-plane electrical conductivity, while providing improved processability, surface tunability, and mass transport properties. In this article, we first describe our synthetic approach and general design considerations. Specifically, we show how ditopic analogues of the tritopic ligands commonly found in the synthesis of 2D MOFs and COFs can be used to achieve a diverse library of conjugated macrocycles that resemble fragments of semiconducting frameworks in both form and function. The length of the peripheral side chains, the size of the aromatic core, and the solubility of intermediates are all key variables in favoring selective macrocycle formation over undesired linear polymers and oligomers. Next, we highlight the unique advantages that macrocycles provide, including improved processability, atomically precise surface tunability, and greater active site accessibility. In particular, the identity of the peripheral side chains dramatically impacts both solubility and colloidal stability as well as crystal size and morphology. We further show how the solution processability and nanoscale dimensions of macrocycles can simplify electronic device fabrication and improve electrochemical performance. Finally, we end with a forward-looking discussion on how macrocycles offer a unique bridge between conjugated molecules and extended frameworks, enabling new application areas and fundamental science.

charge transport↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗
DOE OSTI2024

Unleashing the Potential of Fast Charging Batteries: Leveraging Anion Redox Chemistry in Ni- and Co-Free Cathodes

Designing Li-ion battery cathodes free from critical raw materials such as Co and Ni has a huge technological and societal impact. Though anion redox-based Li-rich oxide cathodes allow designing Co and Ni free cathode compositions, the Li-rich oxides witnessed voltage fade, voltage hysteresis, and irreversible oxygen release despite their high capacity. Conversely, anion redox through highly covalent chalcogenides (S/Se) is emerging due to the improved covalency between metal d and ligand p bands. Here, we investigate the tuning of multi-chalcogen (S/Se) p-band and redox-active metal d-band in a model Li-rich chalcogen composition Li 1.13 Ti 0.57 Fe 0.3 S 2-y Se y (y = 0 - 1) through in-depth electrochemical, X-ray spectroscopy, and DFT-based electronic structure investigations. Introducing the appropriate amount of Se p band character in anion redox sulfides increases interlayer distance and metal - ligand covalency without modifying the original crystal structure, promoting significant electrochemical reversibility through mixed anionic (Se 2- /Se n- , S 2- /S n- , wherein n<2) and cationic (Fe 2+ /Fe 3+ ) redox reactions. Here we show the detailed Fe, S, and Se redox contributions during Li insertion/extraction through X-ray Absorption (XAS) and Hard X-ray Photoemission Spectroscopy (HAXPES) measurements. The orbital tuning approach improves rate capability for more than 10 C charge-discharge rate, exhibiting more than 50% of its original capacity obtained at C/20 rate. The buffer cation in the lattice (Ti 4+ ) remains electrochemically inactive even after significant Se p-band introduction in the sulfide framework. Overall, this work takes advantage of multi-anion redox chemistry to uncover practically demanding fast charging-discharging characteristics in intercalation cathodes. The obtained knowledge of this design can be extended to other oxide and chalcogen cathodes for high performance Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Reversible Disorder-to-Order Transition Induced by Aqueous Lithiation in Vanadate Electrode Materials

Vanadium-based oxides are intriguing electrode materials in aqueous electrochemical systems owing to their low cost and high theoretical capacity for alkali storage, especially lithium (Li) ions. However, a sequence of phase transformations and irreversible structure distortion upon Li-ion intercalation causes structural instability and has been a lingering problem for vanadium oxide electrodes. Here, in this work, we investigate lithium vanadate (Li–V 3 O 8 ) for aqueous Li-ion intercalation and deintercalation processes. Unlike its crystalline V 2 O 5 polymorph, Li–V 3 O 8 retains monophasic lithiation, which is attributed to its disordered crystalline nature and large interplanar distance. Importantly, we show a unique and reversible sequence of disorder-to-order structural transition induced by the extent of lithiation, which indicates sequential interlayer and intralayer lithiation process, and vice versa in delithiation process, supported by electrokinetic analysis, in situ X-ray diffraction (XRD), and Debye scattering simulations. The absence of distortive phase transitions and multilithiation pathways facilitates Li-ion diffusion across the vanadate electrode materials to improve storage capacity. This work opens a new dimension for vanadium-based disordered oxides, accelerating the development of low-cost, aqueous electrochemical systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Temperature-Dependent Structural Transition in Cu-Intercalated Trigonal CuYbSe 2

Rare-earth delafossites, ARCh 2 ; A = alkali metal, R = rare-earth, Ch = chalcogen which consist of intercalated rare-earth metal dichalcogenides, host frustrated triangular lattices that are fertile ground for exotic phenomena. In most cases, the triangular rare-earth sublattice arises from R-3m (No. 166) structures with three layers of rare-earth metal dichalcogenide octahedra or P6 3 /mmc (No. 194) structures with two such layers, analogous to those found in transition metal dichalcogenides. Substituting the alkali metal with Cu + yields a distinct trigonal crystal symmetry P-3m1 (No. 164) in these structures. This symmetry change alters the coordination environment from ASe 6 octahedra in R-3m AYbSe 2 to CuSe 4 tetrahedra in CuYbSe 2 , resulting in shortened rare-earth to rare-earth separations and significantly reduced interlayer distances. Using X-ray single-crystal diffraction, powder neutron diffraction, resistance, and specific heat measurements, a structural transition slightly below room temperature (258 K) is observed. The low-temperature structure is a lower-symmetry I2/m structure, accompanied by partial Cu-site vacancy ordering. The combination of Cu disorder and the triangular lattice geometry in CuYbSe 2 provides a promising platform for investigating frustrated magnetism and unconventional transport phenomena.

Chemical structure↗
DOE OSTI2026

Intercalation-Induced Amorphization Boosts Aqueous Magnesium-Ion Storage

The design of aqueous battery cathode materials that can store divalent ions with high capacity and satisfactory reversibility is of great technical importance and challenge. Here, we report that divalent Mg 2+ storage is facilitated by an intercalation-induced amorphization of vanadate electrode materials. Electrokinetic analyses and in situ synchrotron X-ray diffraction and absorption spectroscopy collectively demonstrate that vanadate layered materials (Li–V 3 O 8 ) undergo a structural transformation to amorphization induced by Mg 2+ intercalation, and a reversible restoration of crystalline structure upon Mg 2+ deintercalation. Debye scattering simulations suggest that intercalation-induced turbostratic disorder, especially random rotations, translational shifts, oscillatory motions, or varied interlayer spacing of adjacent V–O molecular layers, could be responsible for the observed amorphization. The highly distorted local structure, in turn, facilitates Mg 2+ intercalation across the vanadate electrode materials, responsible for nearly 3/7 of the total Mg 2+ ions intercalated. The study presented reveals an intriguing relationship between ion transport and the reversible amorphization-to-crystallization dynamics it induces, opening a paradigm for designing advanced aqueous battery electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Irradiation-Induced Structural Disorder and Its Influence on the Mechanical Response of Polycrystalline MoS2

Molybdenum disulfide (MoS2) thin films are widely used as dry-film lubricants and protective coatings in aerospace and other radiation-exposed environments. Conventional synthesis routes produce polycrystalline films whose grain boundaries and other native defects cause their mechanical and tribological behavior to differ substantially from that of ideal single crystals. Under irradiation, these films progressively evolve from polycrystalline structures, composed of layered MoS2 grains, into highly disordered and eventually amorphous structures, altering both their tribological performance and mechanical integrity. Here, we employ reactive atomistic simulations to investigate irradiation-driven structural evolution in bulk polycrystalline MoS2. Using controlled primary knock-on atom (PKA) events, we characterize the progressive transition from a polycrystalline microstructure to an amorphous network by tracking defect accumulation and structural disorder. We then establish how this transition modifies the dominant deformation mechanisms and the temperature-dependent tensile response. Specifically, irradiation suppresses interlayer sliding and delamination, mechanisms which facilitate the deformation of the pristine polycrystal, resulting in defect-induced hardening. Broadly, our results establish direct process–structure–property relationships linking irradiation-induced defect accumulation, microstructural evolution, deformation mechanisms, and mechanical behavior, providing an atomistic framework for understanding the structural integrity and long-term reliability of irradiated MoS2 coatings.

Moore, Daniel [Sandia National Laboratories (SNL)]↗
DOE OSTI2026

The Modulated Crystal Structure of K 2 V 3 O 8

Weak lattice distortions can tune exchange pathways and magnetic interactions in square-lattice quantum magnets. K 2 V 3 O 8 is a mixed valence (V 4+ /V 5+ ) fresnoite oxide that exhibits strong spin–lattice coupling at low temperature. Here, we combine single-crystal neutron diffraction (90 K) and laboratory X-ray diffraction (50 K) to solve the low-temperature structure as an orthorhombic (3 + 1)D incommensurately modulated phase in superspace group Cmm2(β,0,1/2)0s0 [No. 196]. What initially appeared as two independent modulation vectors, q 1 = 0.3132(6)[$110$] + 1/2c* and q 2 = 0.3132(6)[$1\bar{10}$] + 1/2c*, are more naturally described as a single one-dimensional modulation wave q = 0.626(1)a* + 1/2c* in a C-centered orthorhombic lattice, related to the parent tetragonal cell by the transformation a + b, −a + b, c. Refinement with a 4-fold rotational twin inherited from the P4bm parent structure solves oxygen-dominated framework distortions and K + displacements. A de Wolff section (t = 0.40) enables a symmetry-mode decomposition, identifying three dominant mm2 (C 2v ) modes: GM3 for framework tilt, A5 for interlayer shear, and Z5 for c-axis breathing. The mode-resolved structure provides a unified, symmetry-based explanation for reported low-temperature Raman and IR anomalies and clarifies the structural origin of the spin–lattice coupling in the S = 1/2 two-dimensional quantum spin compound.

K2V3O8↗
DOE OSTI2026

Synthesis and Characterization of Layered Actinide (U, Np, Pu) Oxide and Hydroxide Phases

Systematic structural comparisons across the early actinides remain limited by the scarcity of well-defined transuranic layered oxide and oxyhydroxide phases. Here, we report the synthesis and single-crystal characterization of new layered actinide compounds spanning U, Np, and Pu obtained under mild hydrothermal conditions in concentrated alkali hydroxide media. These include hydrated oxides α-Cs 2 U 2 O 7 •0.5H 2 O and Rb 2 An 2 O 7 •0.5H 2 O (An = Np, Pu), oxy-hydroxides Rb 6 [(AnO 2 ) 6 O 8 (OH) 2 ]•xH 2 O x = 0, 0.5 (An = U, Np) and Rb 4 [(UO 2 ) 5 O 6 (OH) 2 ]•2H 2 O, as well as nitrate-intercalated compounds Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 (An = Np, Pu). Single-crystal X-ray diffraction studies reveal extended two-dimensional architectures constructed from edge- and vertex-sharing actinyl polyhedra, with systematic evolution in equatorial coordination, hydration, and anionic sheet topology across the U–Np–Pu series. Incorporation of nitrate anions within the interlayer region of Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 establishes a previously unobserved structural motif in layered transuranic oxyhydroxides, demonstrating an additional pathway for anion-mediated framework stabilization. Correlation of crystallographic metrics with single-crystal Raman spectroscopy provides new vibrational benchmarks linking differences in An═O yl bond lengths to the equatorial coordination and the interstitial cations. These findings expand the structural hierarchy of layered actinide materials and address clarifying periodic trends governing topology, bonding, and vibrational signatures in high-valent 5ƒ oxide systems.

actinides↗
DOE OSTI2025

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗
DOE OSTI2025

Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1T′-MoTe 2

In van der Waals materials, coupling between adjacent layers is weak, and consequently interlayer interactions are weakly screened. This opens the possibility to profoundly modify the electronic structure, e.g., by applying electric fields or with adsorbates. Here, in this study, we show for the case of the topologically trivial semimetal 1T′-MoTe 2 that potassium dosing at room temperature significantly transforms its band structure. With a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory we show that (i) for small concentrations of K, 1T′-MoTe 2 undergoes a Lifshitz transition with the electronic structure shifting rigidly, and (ii) for larger K concentrations 1T′-MoTe 2 undergoes significant band structure transformation. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Long-Lived Charge-Transfer Excitons in a Graphene–PTCDI–TiOPc Trilayer Heterostructure

Excitation transfer across the interfaces between graphene, perylenetetracarboxylic diimide (PTCDI), and titanyl phthalocyanine (TiOPc) was studied by using transient absorption and photoluminescence spectroscopy. Both photoluminescence quenching and transient absorption measurements confirm the presence of a type-II interface between PTCDI and TiOPc. While the graphene/PTCDI interface is expected to exhibit type-I behavior, transient absorption measurements indicate that only electrons transfer from PTCDI to graphene, with no evidence of hole transfer. Density functional theory calculations reveal significant ground-state electron transfer from graphene to PTCDI, resulting in band bending that prevents excited holes from transferring from PTCDI to graphene. This feature is exploited in a trilayer heterostructure of graphene/PTCDI/TiOPc, where the spatial separation of photoexcited electrons and holes in graphene and TiOPc, respectively, leads to the formation of long-lived photoexcitations with a lifetime of approximately 500 ps. Furthermore, spatially resolved transient absorption measurements reveal the immobile nature of these excitations, confirming that they are charge-transfer excitons rather than free electrons and holes. Furthermore, these results provide valuable insights into the complex interlayer photoexcitation transfer properties and demonstrate precise control over the layer population and the recombination lifetime of photocarriers in such hybrid heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Designing the Nanoconfined Environment for Energy-Efficient Metal Nanoparticle/Ligand-Based Electrocatalysts

Nanoconfined electrocatalysts demonstrate enhanced selectivity and activity owing to new phenomena emerging from chemical species confined at the interface. Creating these nanoconfined pockets at the interface is not trivial. We need highly negative potentials to create the pockets in metal/ligand catalysts like Ag-nanoparticle/ordered ligand interlayer catalysts. Lowering this activation potential can make the electrocatalysis more energy-efficient, and changes in the environment can impact this potential. We used Density Functional Theory (DFT) to evaluate the impact of ligand length and density, interfacial protons, and surface defects like Ag vacancies and Cu and Au dopants. The nanoconfined configuration is stabilized when the ligands are longer and more densely packed, leading to better agglomeration. It is also stabilized when the ligands adsorb protons and when the ligands detach from the surface easily owing to lower charge transfer. Au-doped surfaces displayed the lowest charge transfer and decreased the activation potential.

Jana, Asmita↗